[j-nsp] cacti plugin for SCU/DCU
Dear list, any recommendations for a Cacti plugin for a Juniper SCU/DCU graphing? Thanks! Kind regards, Matjaž --- Matjaž Straus Istenič, Arnes matjaz.str...@arnes.si Tel: +386 1 4798877 Mob: +386 40 200403 Fax: +386 1 4798878 MS6745-RIPE PGP 490F3B4F 2009-10-21 Fingerprint = 6172 7BF8 B0B7 1F09 47B3 AFA3 0946 1701 490F 3B4Fa ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] cacti plugin for SCU/DCU
On Monday, June 24, 2013 11:28:17 AM Matjaž Straus Istenič wrote: Dear list, any recommendations for a Cacti plugin for a Juniper SCU/DCU graphing? When we wanted to do this 3 years ago, we couldn't find a decent plugin. So we ended up using an elaborate scheme of DCU and firewall filters, and then walked http://www.oidview.com/mibs/2636/JUNIPER-FIREWALL-MIB.html so that we can graph the firewall filter counters and create graphs for the same. It would be nice if Juniper could associate this with queues like Cisco do, because you can then just graph the queues. But then again, there are probably other use-cases for DCU/SCU in Juniper like there are for QPPB in Cisco. Mark. signature.asc Description: This is a digitally signed message part. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] similar ASA feature (RRI) on SRX
Hi there, I'm swapping a cisco ASA and I found myself stuck on how configure any similar to cisco RRI(reverse route injection) feature on junos,I'm load balacing with a BigIP between them and I need to know where the tunnel is active in order to advertise it on OSPF, has anyone experience any in the past? please send your thoughts, just keep in my that I can't run any IGP over the tunnel . BR/Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] similar ASA feature (RRI) on SRX
https://kb.juniper.net/InfoCenter/index?page=contentid=KB24362 On Jun 24, 2013, at 8:38 AM, Alberto Santos wrote: Hi there, I'm swapping a cisco ASA and I found myself stuck on how configure any similar to cisco RRI(reverse route injection) feature on junos,I'm load balacing with a BigIP between them and I need to know where the tunnel is active in order to advertise it on OSPF, has anyone experience any in the past? please send your thoughts, just keep in my that I can't run any IGP over the tunnel . BR/Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] cacti plugin for SCU/DCU
Mark Tinka writes: any recommendations for a Cacti plugin for a Juniper SCU/DCU graphing? Assuming that cacti can load a CSV file, you can use accounting profiles to create (and upload) such a file. https://www.juniper.net/techpubs/software/junos/junos93/feature-guide/id-10377050.html https://www.juniper.net/techpubs/software/junos/junos93/feature-guide/id-10350348.html#id-10328159 Thanks, Phil ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] cacti plugin for SCU/DCU
On 24. jun. 2013, at 18:22, Phil Shafer p...@juniper.net wrote: Mark Tinka writes: any recommendations for a Cacti plugin for a Juniper SCU/DCU graphing? Assuming that cacti can load a CSV file, you can use accounting profiles to create (and upload) such a file. Thanks, this is an interesting workaround, but I would rather use SNMP polling based on JUNIPER-SCU/DCU-MIBs. I just do not want to reinvent the wheel :-). https://www.juniper.net/techpubs/software/junos/junos93/feature-guide/id-10377050.html https://www.juniper.net/techpubs/software/junos/junos93/feature-guide/id-10350348.html#id-10328159 Thanks, Phil Kind regards, Matjaž ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] KRT queue stalls fixed in 11.4R8?
According to the release notes for 11.4R8, the KRT queue stall issue (PR836197) has been marked as resolved. Has anyone had a chance to confirm this on a suitably session-heavy MX? -Rob ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] KRT queue stalls fixed in 11.4R8?
On 24-06-13 21:07, Rob Foehl wrote: According to the release notes for 11.4R8, the KRT queue stall issue (PR836197) has been marked as resolved. Has anyone had a chance to confirm this on a suitably session-heavy MX? You still have to wait a while for all the prefixes, but at least there is no blackholing now. -- Grzegorz Janoszka ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] similar ASA feature (RRI) on SRX
You can just point the route at the st0.x interface. When it's down, the route won't install in the table. On Jun 24, 2013, at 3:57 PM, Alberto Santos wrote: Hi, it looks like a possibility, but the remote IP address keeps changing because it is dialup connection. can't monitor the next hop. BR Alberto Santos CCIE #26648 JNCIS-SP - ITIL-F ...Fix your DNS, make it dual-stack, take your mail server and make it dual-stack, take your web server and make it dual-stack... by Randy Bush/RIPE IPv6 On 24 June 2013 13:15, OBrien, Will obri...@missouri.edumailto:obri...@missouri.edu wrote: https://kb.juniper.net/InfoCenter/index?page=contentid=KB24362 On Jun 24, 2013, at 8:38 AM, Alberto Santos wrote: Hi there, I'm swapping a cisco ASA and I found myself stuck on how configure any similar to cisco RRI(reverse route injection) feature on junos,I'm load balacing with a BigIP between them and I need to know where the tunnel is active in order to advertise it on OSPF, has anyone experience any in the past? please send your thoughts, just keep in my that I can't run any IGP over the tunnel . BR/Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.netmailto:juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] similar ASA feature (RRI) on SRX
On 25/06/2013, at 7:08 AM, OBrien, Will obri...@missouri.edu wrote: You can just point the route at the st0.x interface. When it's down, the route won't install in the table. Just watch this in 11.4R5.5 (and others nearby) - there was a bug introduced that kept the state of the tunnel sub-interface up even once the security associations were cleared. Fixed in 12.1R4 (at least). On Jun 24, 2013, at 3:57 PM, Alberto Santos wrote: Hi, it looks like a possibility, but the remote IP address keeps changing because it is dialup connection. can't monitor the next hop. BR Alberto Santos CCIE #26648 JNCIS-SP - ITIL-F ...Fix your DNS, make it dual-stack, take your mail server and make it dual-stack, take your web server and make it dual-stack... by Randy Bush/RIPE IPv6 On 24 June 2013 13:15, OBrien, Will obri...@missouri.edumailto:obri...@missouri.edu wrote: https://kb.juniper.net/InfoCenter/index?page=contentid=KB24362 On Jun 24, 2013, at 8:38 AM, Alberto Santos wrote: Hi there, I'm swapping a cisco ASA and I found myself stuck on how configure any similar to cisco RRI(reverse route injection) feature on junos,I'm load balacing with a BigIP between them and I need to know where the tunnel is active in order to advertise it on OSPF, has anyone experience any in the past? please send your thoughts, just keep in my that I can't run any IGP over the tunnel . BR/Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.netmailto:juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] similar ASA feature (RRI) on SRX
Hi, it looks like a possibility, but the remote IP address keeps changing because it is dialup connection. can't monitor the next hop. BR *Alberto Santos * CCIE #26648 JNCIS-SP - ITIL-F *...Fix your DNS, make it dual-stack, take your mail server and make it dual-stack, take your web server and make it dual-stack... by Randy Bush/RIPE IPv6* On 24 June 2013 13:15, OBrien, Will obri...@missouri.edu wrote: https://kb.juniper.net/InfoCenter/index?page=contentid=KB24362 On Jun 24, 2013, at 8:38 AM, Alberto Santos wrote: Hi there, I'm swapping a cisco ASA and I found myself stuck on how configure any similar to cisco RRI(reverse route injection) feature on junos,I'm load balacing with a BigIP between them and I need to know where the tunnel is active in order to advertise it on OSPF, has anyone experience any in the past? please send your thoughts, just keep in my that I can't run any IGP over the tunnel . BR/Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] KRT queue stalls fixed in 11.4R8?
* Grzegorz Janoszka grzeg...@janoszka.pl [2013-06-24 21:57]: On 24-06-13 21:07, Rob Foehl wrote: According to the release notes for 11.4R8, the KRT queue stall issue (PR836197) has been marked as resolved. Has anyone had a chance to confirm this on a suitably session-heavy MX? You still have to wait a while for all the prefixes, but at least there is no blackholing now. Hi, can you elaborate on that? All I read from the PR is that they fixed starving in the krt queue scheduler. Is it all gone? Regards Sebastian -- GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
