I found with your help.
with "show interfaces terse" command , I saw only ge-0/0/1 was up , not
xe-0/0/1.
I configured the bad interfaces.
I have only SFP modules 1 Gb ( EX-SFP-1GE-SX ), not 10Gb.
I did this stupid mistake because only interfaces xe are pre-configured, not
the ge interfaces.
Now , I configured on the both switchs:
set interface ge-0/0/1 unit 0 family ethernet-switching interface-mode access
set interface ge-0/0/1 unit 0 family ethernet-switching vlan members
vlan-RESEAUX
set interface ge-0/0/1 unit 0 family ethernet-switching storm-control default
and I can ping my other switch.
Thanks to everybody.
- Mail original -
De: "Jared Gull" <jmg...@yahoo.com>
À: "deloin robert" <deloin.rob...@laposte.net>, juniper-nsp@puck.nether.net
Envoyé: Lundi 28 Novembre 2016 21:23:06
Objet: Re: [j-nsp] EX4600 : Ping problem
Can you provide the following outputs from both switches?
- show interfaces terse
- show vlans
- show route
-Regards,
Jared
On Monday, November 28, 2016 12:55 PM, Deloin via juniper-nsp
<juniper-nsp@puck.nether.net> wrote:
Hello,
I have 2 EX4600 switchs.
They have the same symetric configurations:
SWITCH EX4600-1 SWITCH EX4600-2
interfaces { interfaces {
xe-0/0/1 { xe-0/0/1 {
unit 0 { unit 0 {
family ethernet-switching { family ethernet-switching {
interface-mode access; interface-mode access;
vlan { vlan {
members vlan-RESEAUX; members vlan-RESEAUX;
} }
storm-control default; storm-control default;
} }
} }
} }
irb { irb {
unit 0 { unit 0 {
family inet { family inet {
address 10.101.0.4/16; address 10.101.0.5/16;
} }
} }
} }
} }
routing-options { routing-options {
static { static {
route 0.0.0.0/0 next-hop 10.101.0.1; route 0.0.0.0/0 next-hop 10.101.0.1;
} }
} }
vlans { vlans {
default { default {
vlan-id 1; vlan-id 1;
} }
vlan-RESEAUX { vlan-RESEAUX {
vlan-id 98; vlan-id 98;
l3.interface irb.0; l3.interface irb.0;
} }
} }
I put an optic fiber between xe-0/0/1 from a switch and xe-0/0/1 from the other
switch.
And I can't ping the @ 10.101.0.3 and 10.101.0.4 from each switchs.
I obtain :
root@EX4600-01 # run ping 10.101.0.3
PING 10.101.0.3 (10.101.0.3): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
the same for the other.
Can you help me. Can you tell me where is the mistake, or what I forget ?
Thank you !
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
