Re: [j-nsp] 100mbps bandwidth on a logical interface
This would explain the bandwidth value: https://prsearch.juniper.net/InfoCenter/index?page=prcontent=PR471628 Cheers On Thu., 4 Aug. 2016, 01:29 Jonathan Call, <lordsit...@hotmail.com> wrote: > This is an old switch running 11.4R2. The class-of-service shows nothing > of significance: > > Physical interface: ge-0/0/27, Index: 157 > Queues supported: 8, Queues in use: 4 > Scheduler map: , Index: 2 > Congestion-notification: Disabled > > Logical interface: ge-0/0/27.0, Index: 123 > Object Name Type > Index > Classifier ieee8021p-untrust untrust > 16 > > This value seems so obscure you're probably correct that it is some random > PR. > > Jonathan > > I apologize if this doesn't show up formatted properly. For some reason my > Macbook does not seems to copy and paste well in Hotmail. > > From: dale.s...@gmail.com <dale.s...@gmail.com> on behalf of Dale Shaw < > dale.shaw+j-...@gmail.com> > Sent: Wednesday, August 3, 2016 12:53 AM > To: Jonathan Call > Cc: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] 100mbps bandwidth on a logical interface > > > Hi Jonathan, > > On 3 August 2016 at 16:23, Jonathan Call <lordsit...@hotmail.com> wrote: > > > > I have a Gigabit Ethernet port on an EX4200 that is performing very > poorly. It maxes out at about 120Mbps under heavy load. During that heavy > load I see MAC pause frame values increasing as well as dropped packets in > the queue counters. All of this points to the server being the culprit. > [...] > > > > What output do you see with "show class-of-service interface ge-0/0/27" ? > > > I assume based on the existence of "ge-0/0/27" that it's a EX4200-48T/P. > Which Junos release are you running? (might help folks match a PR, if there > is one) > > > Cheers, > Dale > > > ___ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] 100mbps bandwidth on a logical interface
This is an old switch running 11.4R2. The class-of-service shows nothing of significance: Physical interface: ge-0/0/27, Index: 157 Queues supported: 8, Queues in use: 4 Scheduler map: , Index: 2 Congestion-notification: Disabled Logical interface: ge-0/0/27.0, Index: 123 Object Name TypeIndex Classifier ieee8021p-untrust untrust16 This value seems so obscure you're probably correct that it is some random PR. Jonathan I apologize if this doesn't show up formatted properly. For some reason my Macbook does not seems to copy and paste well in Hotmail. From: dale.s...@gmail.com <dale.s...@gmail.com> on behalf of Dale Shaw <dale.shaw+j-...@gmail.com> Sent: Wednesday, August 3, 2016 12:53 AM To: Jonathan Call Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] 100mbps bandwidth on a logical interface Hi Jonathan, On 3 August 2016 at 16:23, Jonathan Call <lordsit...@hotmail.com> wrote: > > I have a Gigabit Ethernet port on an EX4200 that is performing very poorly. > It maxes out at about 120Mbps under heavy load. During that heavy load I see > MAC pause frame values increasing as well as dropped packets in the queue > counters. All of this points to the server being the culprit. [...] What output do you see with "show class-of-service interface ge-0/0/27" ? I assume based on the existence of "ge-0/0/27" that it's a EX4200-48T/P. Which Junos release are you running? (might help folks match a PR, if there is one) Cheers, Dale ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] 100mbps bandwidth on a logical interface
On 3 August 2016 at 09:23, Jonathan Callwrote: > Neither the port nor the switch has any policer/rate limiting policy defined. > The port is assigned to one VLAN and that VLAN has nothing defined except a > vlan-id. So where does this "Bandwidth: 100mbps" value for the logical > interface come from? On all of the other interfaces that value is 0. I don't think it matters, I think it's only used for SNMP. But for documentation purposes, may be useful to have them set correctly, especially if it's subrate port, so that SNMP has idea of maximum rate. I would disable pause frames, there is no point for server with plethora of memory to ask EX4200 with tiny buffers to buffer for it. -- ++ytti ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] 100mbps bandwidth on a logical interface
Hi Jonathan, On 3 August 2016 at 16:23, Jonathan Callwrote: > > I have a Gigabit Ethernet port on an EX4200 that is performing very poorly. It maxes out at about 120Mbps under heavy load. During that heavy load I see MAC pause frame values increasing as well as dropped packets in the queue counters. All of this points to the server being the culprit. [...] What output do you see with "show class-of-service interface ge-0/0/27" ? I assume based on the existence of "ge-0/0/27" that it's a EX4200-48T/P. Which Junos release are you running? (might help folks match a PR, if there is one) Cheers, Dale ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] 100mbps bandwidth on a logical interface
I have a Gigabit Ethernet port on an EX4200 that is performing very poorly. It maxes out at about 120Mbps under heavy load. During that heavy load I see MAC pause frame values increasing as well as dropped packets in the queue counters. All of this points to the server being the culprit. However I'm seeing something unusual in the "show interface extensive" output. In one spot it says: Autonegotiation information: Negotiation status: Complete Link partner: Link mode: Full-duplex, Flow control: Symmetric, Remote fault: OK, Link partner Speed: 1000 Mbps Local resolution: Flow control: Symmetric, Remote fault: Link OK Those values are no surprise. But then just a little further down it says: Logical interface ge-0/0/27.0 (Index 123) (SNMP ifIndex 598) (Generation 190) Flags: SNMP-Traps 0x0 Encapsulation: ENET2 Bandwidth: 100mbps Traffic statistics: Input bytes : 32116 Output bytes : 2551284 Input packets: 146 Output packets: 21977 Local statistics: Input bytes : 32116 Output bytes : 2551284 Input packets: 146 Output packets: 21977 Transit statistics: Input bytes : 0 0 bps Output bytes : 0 0 bps Input packets: 0 0 pps Output packets: 0 0 pps Protocol eth-switch, Generation: 220, Route table: 0 Flags: None Neither the port nor the switch has any policer/rate limiting policy defined. The port is assigned to one VLAN and that VLAN has nothing defined except a vlan-id. So where does this "Bandwidth: 100mbps" value for the logical interface come from? On all of the other interfaces that value is 0. Jonathan ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp