[Kernel-packages] [Bug 1222029] Re: Wifi encryption does not work Kernel modules: rtl8192se

2013-09-07 Thread Ronald Duncan 
The kernel version with the bug is linux-image-3.2.0-53-generic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222029/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222031] [NEW] bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

2013-09-07 Thread Asaf Ravid 
Public bug reported:

I have a Dell Inspiron and cannot use wireless connection because the
driver fails to install

ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
Uname: Linux 3.8.0-29-generic x86_64
ApportVersion: 2.0.1-0ubuntu17.4
Architecture: amd64
DKMSKernelVersion: 3.8.0-29-generic
Date: Sat Sep  7 09:00:36 2013
InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
MarkForUpload: True
PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
SourcePackage: bcmwl
Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: bcmwl (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package precise

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1222031

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build

Status in “bcmwl” package in Ubuntu:
  New

Bug description:
  I have a Dell Inspiron and cannot use wireless connection because the
  driver fails to install

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  DKMSKernelVersion: 3.8.0-29-generic
  Date: Sat Sep  7 09:00:36 2013
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1222031/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222029] AlsaDevices.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: AlsaDevices.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806898/+files/AlsaDevices.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] Re: Wifi encryption does not work Kernel modules: rtl8192se

2013-09-07 Thread Ronald Duncan 
apport information

** Tags added: apport-collected precise

** Description changed:

  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug
  
  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
  
  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
+ --- 
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
+ ApportVersion: 2.0.1-0ubuntu17.4
+ Architecture: amd64
+ ArecordDevices:
+   List of CAPTURE Hardware Devices 
+  card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
+Subdevices: 1/1
+Subdevice #0: subdevice #0
+ AudioDevicesInUse:
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  ronald 1747 F pulseaudio
+   ronald 1776 F xfce4-volumed
+ CRDA:
+  country EC:
+   (2402 - 2482 @ 40), (N/A, 20)
+   (5170 - 5250 @ 20), (3, 17)
+   (5250 - 5330 @ 20), (3, 23), DFS
+   (5735 - 5835 @ 20), (3, 30)
+ Card0.Amixer.info:
+  Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
+Mixer name : 'Realtek ALC272'
+Components : 'HDA:10ec0272,15587465,0011'
+Controls  : 25
+Simple ctrls  : 13
+ DistroRelease: Ubuntu 12.04
+ HibernationDevice: RESUME=UUID=121c8dcc-d4be-4a65-a443-6d92fca106d0
+ InstallationMedia: Xubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012)
+ MachineType: clevo M7x0K
+ MarkForUpload: True
+ Package: linux (not installed)
+ ProcEnviron:
+  LANGUAGE=en_GB:en
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_GB.UTF-8
+  SHELL=/bin/bash
+ ProcFB: 0

[Kernel-packages] [Bug 1222029] AplayDevices.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: AplayDevices.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806899/+files/AplayDevices.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] CurrentDmesg.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806903/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] Card0.Codecs.codec.0.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: Card0.Codecs.codec.0.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806902/+files/Card0.Codecs.codec.0.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13

[Kernel-packages] [Bug 1222029] Lsusb.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: Lsusb.txt
   https://bugs.launchpad.net/bugs/1222029/+attachment/3806906/+files/Lsusb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] Lspci.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: Lspci.txt
   https://bugs.launchpad.net/bugs/1222029/+attachment/3806905/+files/Lspci.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] WifiSyslog.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: WifiSyslog.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806914/+files/WifiSyslog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] ProcModules.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: ProcModules.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806910/+files/ProcModules.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] PulseList.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: PulseList.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806911/+files/PulseList.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] ProcInterrupts.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: ProcInterrupts.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806909/+files/ProcInterrupts.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu

[Kernel-packages] [Bug 1222029] PciMultimedia.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: PciMultimedia.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806907/+files/PciMultimedia.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu

[Kernel-packages] [Bug 1222029] UdevLog.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: UdevLog.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806913/+files/UdevLog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] Re: Wifi encryption does not work Kernel modules: rtl8192se

2013-09-07 Thread Ronald Duncan 
Sorry it crashed

ronald@ronald-xubuntu:~$ apport-collect 1222029
The authorization page:
 
(https://launchpad.net/+authorize-token?oauth_token=mFLcnLDV0mBGNWmLR3kdallow_permission=DESKTOP_INTEGRATION)
should be opening in your browser. Use your browser to authorize
this program to access Launchpad on your behalf.
Press any key to continue or wait (5) seconds...
Waiting to hear from Launchpad about your decision...
ERROR: hook /usr/share/apport/general-hooks/cloud_archive.py crashed:
Traceback (most recent call last):
  File /usr/lib/python2.7/dist-packages/apport/report.py, line 719, in 
add_hooks_info
symb['add_info'](self, ui)
  File /usr/share/apport/general-hooks/cloud_archive.py, line 18, in add_info
if '~cloud' in packaging.get_version(package) and \
  File /usr/lib/python2.7/dist-packages/apport/packaging_impl.py, line 95, in 
get_version
raise ValueError('package does not exist')
ValueError: package does not exist
No packages found matching linux.
ronald@ronald-xubuntu:~$

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound

[Kernel-packages] [Bug 1222029] UdevDb.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: UdevDb.txt
   https://bugs.launchpad.net/bugs/1222029/+attachment/3806912/+files/UdevDb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222029] ProcCpuinfo.txt

2013-09-07 Thread Ronald Duncan 
apport information

** Attachment added: ProcCpuinfo.txt
   
https://bugs.launchpad.net/bugs/1222029/+attachment/3806908/+files/ProcCpuinfo.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222029

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:   Data: 
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, 
L1 64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 512ns, L1 64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta:  RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
Arb:Fixed- WRR32- WRR64- WRR128-
Ctrl:   ArbSelect=Fixed
Status: InProgress-
VC0:Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
Kernel modules: rtl8192se
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ronald 1747 F pulseaudio
ronald 1776 F xfce4-volumed
  CRDA:
   country EC:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xf040 irq 16'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,15587465,0011'
 Controls  : 25
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04

[Kernel-packages] [Bug 1222035] [NEW] [Hewlett-Packard HP Pavilion g4 Notebook PC] suspend/resume failure [non-free: wl]

2013-09-07 Thread Manuel Alejandro Jiménez Quintero 
Public bug reported:

Computer freezes while entering sleep mode.

ProblemType: KernelOops
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-4-generic 3.11.0-4.9
ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
Uname: Linux 3.11.0-4-generic x86_64
NonfreeKernelModules: wl
Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
ApportVersion: 2.12.1-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  alejanjim   1769 F pulseaudio
Date: Fri Sep  6 22:51:20 2013
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
HibernationDevice: RESUME=UUID=09533c22-f07f-4d05-9e7b-c3096a4ccb03
InstallationDate: Installed on 2013-08-25 (12 days ago)
InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130821)
InterpreterPath: /usr/bin/python3.3
MachineType: Hewlett-Packard HP Pavilion g4 Notebook PC
MarkForUpload: True
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
 TERM=linux
 PATH=(custom, no user)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-4-generic 
root=UUID=4a300f41-5ef8-4e62-8188-2d14c70a577b ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not 
responding.
RelatedPackageVersions:
 linux-restricted-modules-3.11.0-4-generic N/A
 linux-backports-modules-3.11.0-4-generic  N/A
 linux-firmware1.113
SourcePackage: linux
Title: [Hewlett-Packard HP Pavilion g4 Notebook PC] suspend/resume failure 
[non-free: wl]
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
 
dmi.bios.date: 01/24/2013
dmi.bios.vendor: Insyde
dmi.bios.version: F.66
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 166D
dmi.board.vendor: Hewlett-Packard
dmi.board.version: 09.4C
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnInsyde:bvrF.66:bd01/24/2013:svnHewlett-Packard:pnHPPaviliong4NotebookPC:pvr06921220461610100:rvnHewlett-Packard:rn166D:rvr09.4C:cvnHewlett-Packard:ct10:cvrChassisVersion:
dmi.product.name: HP Pavilion g4 Notebook PC
dmi.product.version: 06921220461610100
dmi.sys.vendor: Hewlett-Packard

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Confirmed


** Tags: amd64 apport-kerneloops resume saucy suspend

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222035

Title:
  [Hewlett-Packard HP Pavilion g4 Notebook PC] suspend/resume failure
  [non-free: wl]

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Computer freezes while entering sleep mode.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic x86_64
  NonfreeKernelModules: wl
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  alejanjim   1769 F pulseaudio
  Date: Fri Sep  6 22:51:20 2013
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=09533c22-f07f-4d05-9e7b-c3096a4ccb03
  InstallationDate: Installed on 2013-08-25 (12 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130821)
  InterpreterPath: /usr/bin/python3.3
  MachineType: Hewlett-Packard HP Pavilion g4 Notebook PC
  MarkForUpload: True
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-4-generic 
root=UUID=4a300f41-5ef8-4e62-8188-2d14c70a577b ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon 
not responding.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  Title: [Hewlett-Packard HP Pavilion g4 Notebook PC] suspend/resume failure 
[non-free: wl]
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/24/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.66
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 166D
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 09.4C
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.66:bd01/24/2013:svnHewlett-Packard:pnHPPaviliong4NotebookPC:pvr06921220461610100:rvnHewlett-Packard:rn166D:rvr09.4C:cvnHewlett-Packard:ct10:cvrChassisVersion:

[Kernel-packages] [Bug 1222035] Status changed to Confirmed

2013-09-07 Thread Brad Figg 
This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222035

Title:
  [Hewlett-Packard HP Pavilion g4 Notebook PC] suspend/resume failure
  [non-free: wl]

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Computer freezes while entering sleep mode.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic x86_64
  NonfreeKernelModules: wl
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  alejanjim   1769 F pulseaudio
  Date: Fri Sep  6 22:51:20 2013
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=09533c22-f07f-4d05-9e7b-c3096a4ccb03
  InstallationDate: Installed on 2013-08-25 (12 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130821)
  InterpreterPath: /usr/bin/python3.3
  MachineType: Hewlett-Packard HP Pavilion g4 Notebook PC
  MarkForUpload: True
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-4-generic 
root=UUID=4a300f41-5ef8-4e62-8188-2d14c70a577b ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon 
not responding.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  Title: [Hewlett-Packard HP Pavilion g4 Notebook PC] suspend/resume failure 
[non-free: wl]
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/24/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.66
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 166D
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 09.4C
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.66:bd01/24/2013:svnHewlett-Packard:pnHPPaviliong4NotebookPC:pvr06921220461610100:rvnHewlett-Packard:rn166D:rvr09.4C:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion g4 Notebook PC
  dmi.product.version: 06921220461610100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222035/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222033] Re: Wifi encryption does not work Kernel modules: rtl8192se

2013-09-07 Thread Ronald Duncan 
had a quick look at the log the issue is at

Sep  7 05:23:49 ronald-xubuntu NetworkManager[773]: info (wlan0): supplicant 
interface state: authenticating - associating
Sep  7 05:23:49 ronald-xubuntu wpa_supplicant[1019]: Associated with 
a4:b1:e9:40:6b:d1
Sep  7 05:23:49 ronald-xubuntu NetworkManager[773]: info (wlan0): supplicant 
interface state: associating - 4-way handshake
Sep  7 05:23:52 ronald-xubuntu kernel: [ 2454.163623] wlan0: deauthenticated 
from a4:b1:e9:40:6b:d1 (Reason: 2)
Sep  7 05:23:52 ronald-xubuntu wpa_supplicant[1019]: WPA: 4-Way Handshake 
failed - pre-shared key may be incorrect

reboots
Sep  7 04:29:09 ronald-xubuntu kernel: [0.00] Linux version 
3.2.0-52-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 
4.6.3-1ubuntu5) ) #78-Ubuntu SMP Fri Jul 26 16:21:44 UTC 2013 (Ubuntu 
3.2.0-52.78-generic 3.2.48)

wifi working

upgrade kernel
Sep  7 04:43:12 ronald-xubuntu kernel: [0.00] Linux version 
3.2.0-53-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 
4.6.3-1ubuntu5) ) #81-Ubuntu SMP Thu Aug 22 21:01:03 UTC 2013 (Ubuntu 
3.2.0-53.81-generic 3.2.50)


wifi stopped

I downgraded using
sudo /etc/kernel/postrm.d/zz-update-grub 3.2.0-52-generic 
/boot/vmlinuz-3.2.0-52-generic

However uname -a shows
uname -a
Linux ronald-xubuntu 3.2.0-53-generic #81-Ubuntu SMP Thu Aug 22 21:01:03 UTC 
2013 x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222033

Title:
  Wifi encryption does not work Kernel modules: rtl8192se

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Information for bug Bug #1222029

  linux-image-3.2.0-53-generic

  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
  Downgraded to 3.2.0-52 and can now connect again and am reporting the bug

  lspci | grep -i wireless
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)

  lspci -vv -s 0f:00.0
  0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
   Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
   Latency: 0, Cache Line Size: 32 bytes
   Interrupt: pin A routed to IRQ 18
   Region 0: I/O ports at a000 [size=256]
   Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:  Data: 
   Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, L1 64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 512ns, 
L1 64us
 ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- 
ABWMgmt-
   Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- 
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- 
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ 
ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
   Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
   Kernel driver in use: rtl8192se
   Kernel modules: rtl8192se

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package:

[Kernel-packages] [Bug 1221857] Re: Wifi slowly degrades until no data transfer

2013-09-07 Thread Benjamin Kerensa 
Also it is my understanding looking at Redhat Bugzilla and Launchpad
that Intel still has not solidly implemented 802.11n in the iwlwifi
driver for all cards. Although I have tweaked with module settings such
as disabling N I'm unsure if the issue is even related since the
slowdown seems to happen even with N toggled off.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1221857

Title:
  Wifi slowly degrades until no data transfer

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  My wifi has been slowly degrading at random times to the point of no
  data transfer but network-manager still shows connected. Only thing
  that resolves it seems to be manually disconnecting from wifi AP via
  network-manager and reconnecting also toggling N off in iwlwifi seems
  to have some effect (maybe coincidence though)

  I have ruled out the issue being a result of interference by checking
  signal quality (iwconfig) when it occurs and my cable modem is online
  with no issues and so is Wireless AP and other devices do not have
  this issue.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-5-generic 3.11.0-5.10
  ProcVersionSignature: Ubuntu 3.11.0-5.10-generic 3.11.0
  Uname: Linux 3.11.0-5-generic x86_64
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bkerensa   1871 F pulseaudio
   /dev/snd/pcmC0D0p:   bkerensa   1871 F...m pulseaudio
  Date: Fri Sep  6 10:33:30 2013
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=42166247-fbbd-410b-acc0-b951406b36bc
  InstallationDate: Installed on 2013-07-27 (41 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: Dell Inc. Dell System Inspiron N411Z
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-5-generic 
root=UUID=132b8e71-0e4d-42f4-bb3d-8b0a25d42a35 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-5-generic N/A
   linux-backports-modules-3.11.0-5-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-07-27 (41 days ago)
  dmi.bios.date: 06/24/2011
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A00
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 0VK06J
  dmi.board.vendor: Dell Inc.
  dmi.board.version: FAB1
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA00:bd06/24/2011:svnDellInc.:pnDellSystemInspironN411Z:pvr:rvnDellInc.:rn0VK06J:rvrFAB1:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System Inspiron N411Z
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1221857/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1221857] Re: Wifi slowly degrades until no data transfer

2013-09-07 Thread Benjamin Kerensa 
@Joseph:

This has been happening since the first 13.10 image was available and I
installed it so several months now. So it happened in 3.10 and is still
occuring in 3.11. I just had it happen again this evening and looked at
dmesg and saw some odd looking messages about iwlwifi:

[   80.035772] Call Trace:
[   80.035777]  [816f2351] dump_stack+0x45/0x56
[   80.035781]  [81061cfd] warn_slowpath_common+0x7d/0xa0
[   80.035783]  [81061dda] warn_slowpath_null+0x1a/0x20
[   80.035788]  [a02ed225] iwl_trans_pcie_send_hcmd+0x575/0x5d0 
[iwlwifi]
[   80.035794]  [a0459b0b] ? iwlagn_set_rxon_chain+0x16b/0x260 
[iwldvm]
[   80.035799]  [a0459cc2] iwl_dvm_send_cmd+0x52/0x130 [iwldvm]
[   80.035804]  [a045a0e1] iwl_dvm_send_cmd_pdu+0x41/0x50 [iwldvm]
[   80.035808]  [a04628f4] iwl_power_set_mode+0x1b4/0x300 [iwldvm]
[   80.035813]  [a0462ae7] iwl_power_update_mode+0xa7/0x190 [iwldvm]
[   80.035818]  [a0466b91] iwlagn_mac_config+0x2f1/0x390 [iwldvm]
[   80.035824]  [a0383892] ieee80211_hw_config+0x72/0x320 [mac80211]
[   80.035835]  [a03bf3ae] ieee80211_recalc_ps.part.21+0x17e/0x200 
[mac80211]
[   80.035845]  [a03c0ca7] ieee80211_rx_mgmt_beacon+0xd17/0x1110 
[mac80211]
[   80.035848]  [8101a2e5] ? native_sched_clock+0x15/0x80
[   80.035850]  [81098d68] ? __enqueue_entity+0x78/0x80
[   80.035852]  [8109d96d] ? enqueue_entity+0x2ad/0xb80
[   80.035854]  [81098206] ? arch_vtime_task_switch+0x96/0xa0
[   80.035856]  [8109cef8] ? check_preempt_wakeup+0x1a8/0x270
[   80.035858]  [81092675] ? check_preempt_curr+0x85/0xa0
[   80.035860]  [810926a9] ? ttwu_do_wakeup+0x19/0xd0
[   80.035863]  [810945b0] ? try_to_wake_up+0x200/0x2b0
[   80.035865]  [8109b7ac] ? update_curr+0xec/0x180
[   80.035874]  [a03c2503] ieee80211_sta_rx_queued_mgmt+0x2c3/0x540 
[mac80211]
[   80.035876]  [8109cef8] ? check_preempt_wakeup+0x1a8/0x270
[   80.035878]  [81092675] ? check_preempt_curr+0x85/0xa0
[   80.035880]  [810926a9] ? ttwu_do_wakeup+0x19/0xd0
[   80.035882]  [810945b0] ? try_to_wake_up+0x200/0x2b0
[   80.035885]  [8104deb9] ? default_spin_lock_flags+0x9/0x10
[   80.035893]  [a039343c] ieee80211_iface_work+0x25c/0x360 [mac80211]
[   80.035895]  [8107afd9] ? pwq_activate_delayed_work+0x39/0x80
[   80.035897]  [8107cfbc] process_one_work+0x17c/0x430
[   80.035899]  [8107dc0c] worker_thread+0x11c/0x3c0
[   80.035901]  [8107daf0] ? manage_workers.isra.24+0x2a0/0x2a0
[   80.035904]  [81084710] kthread+0xc0/0xd0
[   80.035906]  [81084650] ? kthread_create_on_node+0x120/0x120
[   80.035909]  [8170212c] ret_from_fork+0x7c/0xb0
[   80.035912]  [81084650] ? kthread_create_on_node+0x120/0x120
[   80.035913] ---[ end trace e07b3e760c09dab0 ]---
[   80.035916] iwlwifi :02:00.0: Command POWER_TABLE_CMD: a command is 
already active!
[   80.035919] iwlwifi :02:00.0: set power fail, ret = -5

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1221857

Title:
  Wifi slowly degrades until no data transfer

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  My wifi has been slowly degrading at random times to the point of no
  data transfer but network-manager still shows connected. Only thing
  that resolves it seems to be manually disconnecting from wifi AP via
  network-manager and reconnecting also toggling N off in iwlwifi seems
  to have some effect (maybe coincidence though)

  I have ruled out the issue being a result of interference by checking
  signal quality (iwconfig) when it occurs and my cable modem is online
  with no issues and so is Wireless AP and other devices do not have
  this issue.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-5-generic 3.11.0-5.10
  ProcVersionSignature: Ubuntu 3.11.0-5.10-generic 3.11.0
  Uname: Linux 3.11.0-5-generic x86_64
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bkerensa   1871 F pulseaudio
   /dev/snd/pcmC0D0p:   bkerensa   1871 F...m pulseaudio
  Date: Fri Sep  6 10:33:30 2013
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=42166247-fbbd-410b-acc0-b951406b36bc
  InstallationDate: Installed on 2013-07-27 (41 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: Dell Inc. Dell System Inspiron N411Z
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-5-generic 
root=UUID=132b8e71-0e4d-42f4-bb3d-8b0a25d42a35 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-5-generic N/A
   linux-backports-modules-3.11.0-5-generic  N/A
   

[Kernel-packages] [Bug 1222070] [NEW] Kernel Panic --not syncing fatal exception in interrupt

2013-09-07 Thread Chascon 
Public bug reported:

Using the infrared remote control results in a kernel panic. This is
reproducible using mplayer.

1) lsb_release -rd
Description:Ubuntu Saucy Salamander (development branch)
Release:13.10
2) apt-cache policy linux
linux:
  Installed: (none)
  Candidate: 3.11.0.4.5
  Version table:
 3.11.0.4.5 0
500 http://ca.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages

uname -r
3.11.0-4-generic

apt-cache policy mplayer
mplayer:
  Installed: (none)
  Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
  Version table:
 2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
 2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
100 /var/lib/dpkg/status

3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.  
4) Audio loops like a scratched record, computer hard locks so that the 
keyboard becomes entirely unresponsive: no escaping to a tty, keyboard capslock 
doesn't light up, screen goes to tty1 and outputs Kernel Panic --not syncing 
fatal exception in interrupt, and SysRq-cntrl-alt-r does not reboot the 
computer.

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-4-generic 3.11.0-4.9
ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
Uname: Linux 3.11.0-4-generic i686
ApportVersion: 2.12.1-0ubuntu3
Architecture: i386
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  mo 3994 F pulseaudio
 /dev/snd/controlC0:  mo 3525 F volumeicon
  mo 3994 F pulseaudio
 /dev/snd/pcmC0D0c:   mo 3994 F...m pulseaudio
Date: Sat Sep  7 02:35:53 2013
HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
InstallationDate: Installed on 2011-09-05 (733 days ago)
InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
MachineType: Apple Computer, Inc. MacBookPro1,1
MarkForUpload: True
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.11.0-4-generic N/A
 linux-backports-modules-3.11.0-4-generic  N/A
 linux-firmware1.113
SourcePackage: linux
StagingDrivers: zram
UpgradeStatus: Upgraded to saucy on 2013-09-01 (5 days ago)
dmi.bios.date: 10/12/06
dmi.bios.vendor: Apple Computer, Inc.
dmi.bios.version: MBP11.88Z.0055.B08.0610121325
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: Mac-F425BEC8
dmi.board.vendor: Apple Computer, Inc.
dmi.board.version: PVT
dmi.chassis.asset.tag: Asset Tag
dmi.chassis.type: 8
dmi.chassis.vendor: Apple Computer, Inc.
dmi.chassis.version: Mac-F425BEC8
dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
dmi.product.name: MacBookPro1,1
dmi.product.version: 1.0
dmi.sys.vendor: Apple Computer, Inc.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Confirmed


** Tags: apport-bug i386 saucy staging

** Attachment added: lspci-vnvn.log
   
https://bugs.launchpad.net/bugs/1222070/+attachment/3807085/+files/lspci-vnvn.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222070

Title:
  Kernel Panic --not syncing fatal exception in interrupt

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Using the infrared remote control results in a kernel panic. This is
  reproducible using mplayer.

  1) lsb_release -rd
  Description:  Ubuntu Saucy Salamander (development branch)
  Release:  13.10
  2) apt-cache policy linux
  linux:
Installed: (none)
Candidate: 3.11.0.4.5
Version table:
   3.11.0.4.5 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages

  uname -r
  3.11.0-4-generic

  apt-cache policy mplayer
  mplayer:
Installed: (none)
Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
Version table:
   2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
   2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
  100 /var/lib/dpkg/status

  3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.  
  4) Audio loops like a scratched record, computer hard locks so that the 
keyboard becomes entirely unresponsive: no escaping to a tty, keyboard capslock 
doesn't light up, screen goes to tty1 and outputs Kernel Panic --not syncing 
fatal exception in interrupt, and SysRq-cntrl-alt-r does not reboot the 
computer.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic i686

[Kernel-packages] [Bug 1221075] Re: Waking from Hibernate results in soft lockup - CPU# stuck for x seconds

2013-09-07 Thread Whoopie 
** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1221075

Title:
  Waking from Hibernate results in soft lockup - CPU# stuck for x
  seconds

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Waking from Hibernate results in soft lockup, my 4 CPU cores stuck for 22-23s 
seconds. I'm using a 64-bit system with Linux version 3.8.0-29-generic.
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ely3712 F pulseaudio
  DistroRelease: LinuxMint 15
  HibernationDevice: RESUME=UUID=adec798f-c77d-41fa-bb73-bb7e0f38e7ce
  InstallationDate: Installed on 2013-06-01 (96 days ago)
  InstallationMedia: Linux Mint 15 Olivia - Release amd64 (20130520)
  MachineType: Dell Inc. Inspiron 5520
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic 
root=UUID=c637aefe-5ff3-4b70-aa5a-dee86207de75 ro acpi_backlight=vendor quiet 
splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-29-generic N/A
   linux-backports-modules-3.8.0-29-generic  N/A
   linux-firmware1.106
  StagingDrivers: rts5139 zram
  Tags:  olivia staging
  Uname: Linux 3.8.0-29-generic x86_64
  UnreportableReason: This is not an official LinuxMint package. Please remove 
any third party package and try again.
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip fuse lpadmin plugdev sambashare sudo vboxusers
  dmi.bios.date: 10/03/2012
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A11
  dmi.board.name: 04G65K
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: A11
  dmi.modalias: 
dmi:bvnDellInc.:bvrA11:bd10/03/2012:svnDellInc.:pnInspiron5520:pvrA11:rvnDellInc.:rn04G65K:rvrA00:cvnDellInc.:ct8:cvrA11:
  dmi.product.name: Inspiron 5520
  dmi.product.version: A11
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1221075/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222070] Status changed to Confirmed

2013-09-07 Thread Brad Figg 
This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222070

Title:
  Kernel Panic --not syncing fatal exception in interrupt

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Using the infrared remote control results in a kernel panic. This is
  reproducible using mplayer.

  1) lsb_release -rd
  Description:  Ubuntu Saucy Salamander (development branch)
  Release:  13.10
  2) apt-cache policy linux
  linux:
Installed: (none)
Candidate: 3.11.0.4.5
Version table:
   3.11.0.4.5 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages

  uname -r
  3.11.0-4-generic

  apt-cache policy mplayer
  mplayer:
Installed: (none)
Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
Version table:
   2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
   2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
  100 /var/lib/dpkg/status

  3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.  
  4) Audio loops like a scratched record, computer hard locks so that the 
keyboard becomes entirely unresponsive: no escaping to a tty, keyboard capslock 
doesn't light up, screen goes to tty1 and outputs Kernel Panic --not syncing 
fatal exception in interrupt, and SysRq-cntrl-alt-r does not reboot the 
computer.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic i686
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3994 F pulseaudio
   /dev/snd/controlC0:  mo 3525 F volumeicon
mo 3994 F pulseaudio
   /dev/snd/pcmC0D0c:   mo 3994 F...m pulseaudio
  Date: Sat Sep  7 02:35:53 2013
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (5 days ago)
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222070/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222081] [NEW] package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1

2013-09-07 Thread Groseille 
*** This bug is a duplicate of bug 1222080 ***
https://bugs.launchpad.net/bugs/1222080

Public bug reported:

Occured during update.

ProblemType: Package
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-30-generic 3.8.0-30.44
ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
Uname: Linux 3.8.0-27-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  elkarm 2878 F pulseaudio
 /dev/snd/seq:timidity   2699 F timidity
Date: Sat Sep  7 09:36:18 2013
DuplicateSignature: package:linux-image-3.8.0-30-generic:3.8.0-30.44:run-parts: 
/etc/kernel/postinst.d/initramfs-tools exited with return code 1
ErrorMessage: subprocess installed post-installation script returned error exit 
status 2
HibernationDevice: RESUME=UUID=3abd34af-2950-49a0-bcaa-81385ddf5c50
InstallationDate: Installed on 2010-09-25 (1077 days ago)
InstallationMedia: Ubuntu 10.04.1 LTS Lucid Lynx - Release amd64 (20100816.1)
MachineType: SAMSUNG ELECTRONICS CO., LTD. R530/R730
MarkForUpload: True
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic 
root=UUID=a10cc7f2-b6c4-457d-ae52-23a2be61612c ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.00-13ubuntu3
SourcePackage: linux
Title: package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to 
install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with 
return code 1
UpgradeStatus: Upgraded to raring on 2013-08-12 (25 days ago)
WifiSyslog:
 
dmi.bios.date: 03/08/2010
dmi.bios.vendor: Phoenix Technologies Ltd.
dmi.bios.version: 04JD.M015.20100308.KSJ
dmi.board.name: R530/R730
dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.board.version: Not Applicable
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvr04JD.M015.20100308.KSJ:bd03/08/2010:svnSAMSUNGELECTRONICSCO.,LTD.:pnR530/R730:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnR530/R730:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct10:cvrN/A:
dmi.product.name: R530/R730
dmi.product.version: Not Applicable
dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package raring

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222081

Title:
  package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to
  install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools
  exited with return code 1

Status in “linux” package in Ubuntu:
  New

Bug description:
  Occured during update.

  ProblemType: Package
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-30-generic 3.8.0-30.44
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  Uname: Linux 3.8.0-27-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  elkarm 2878 F pulseaudio
   /dev/snd/seq:timidity   2699 F timidity
  Date: Sat Sep  7 09:36:18 2013
  DuplicateSignature: 
package:linux-image-3.8.0-30-generic:3.8.0-30.44:run-parts: 
/etc/kernel/postinst.d/initramfs-tools exited with return code 1
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 2
  HibernationDevice: RESUME=UUID=3abd34af-2950-49a0-bcaa-81385ddf5c50
  InstallationDate: Installed on 2010-09-25 (1077 days ago)
  InstallationMedia: Ubuntu 10.04.1 LTS Lucid Lynx - Release amd64 
(20100816.1)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. R530/R730
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic 
root=UUID=a10cc7f2-b6c4-457d-ae52-23a2be61612c ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.00-13ubuntu3
  SourcePackage: linux
  Title: package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to 
install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with 
return code 1
  UpgradeStatus: Upgraded to raring on 2013-08-12 (25 days ago)
  WifiSyslog:
   
  dmi.bios.date: 03/08/2010
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: 04JD.M015.20100308.KSJ
  dmi.board.name: R530/R730
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias:

[Kernel-packages] [Bug 1221928] Re: Scripts keep blocking my laptop

2013-09-07 Thread babis x 
The adress which i was in when all these above happened yesterday was
:http://epanastasi-gr.blogspot.com/2013/09/benjamin-
freedman.html#more,via firefox

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1221928

Title:
  Scripts keep blocking my laptop

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Script: http://www.youtube.com/embed/0sfCwyf3qrc:0
  This is the script which appeared after i send you the collected informations 
using the ubuntu-bug linux.
  An hour or two ago , i got security updates and things were much better until 
i start looking for the speech of Benjamin Freedman,and sudenly problems 
started until my page got frozen and i had no other option than ubuntu-bug 
linux.
  Now the script on top appeared and hopefully evything will go fine.
  THANK YOU SO MUCH FOR ALL YOU DO TO HELP !!

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-30-generic 3.8.0-30.44
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic i686
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  babis  1860 F pulseaudio
babis  1998 F panel-16-mixer
   /dev/snd/controlC1:  babis  1860 F pulseaudio
babis  1998 F panel-16-mixer
  CRDA:
   country AM:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (N/A, 18)
(5250 - 5330 @ 20), (N/A, 18), DFS
  CurrentDmesg:
   [   26.129168] 8139too :0a:07.0 eth0: link up, 100Mbps, full-duplex, lpa 
0x45E1
   [ 1058.925247] delay: estimated 89, actual 0
   [ 1848.877346] delay: estimated 89, actual 0
   [ 3239.717521] delay: estimated 90, actual 1
  Date: Sat Sep  7 00:14:05 2013
  HibernationDevice: RESUME=UUID=7cca9bde-be93-4f75-9826-c340be894633
  InstallationDate: Installed on 2013-07-30 (38 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  Lsusb:
   Bus 002 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical 
Mouse
   Bus 003 Device 002: ID 046d:0a10 Logitech, Inc. 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: FUJITSU SIEMENS AMILO Li 1718
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic 
root=UUID=f3eaa24a-6208-44b5-a077-66ee1da1e3d9 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-30-generic N/A
   linux-backports-modules-3.8.0-30-generic  N/A
   linux-firmware1.106
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/25/07
  dmi.bios.vendor: Phoenix
  dmi.bios.version: V1.8
  dmi.board.name: AMILO Li 1718
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: Rev.A
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 1
  dmi.chassis.vendor: ATI
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenix:bvrV1.8:bd06/25/07:svnFUJITSUSIEMENS:pnAMILOLi1718:pvr-1:rvnFUJITSUSIEMENS:rnAMILOLi1718:rvrRev.A:cvnATI:ct1:cvrN/A:
  dmi.product.name: AMILO Li 1718
  dmi.product.version: -1
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1221928/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222085] Re: package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1

2013-09-07 Thread Apport retracing service 
*** This bug is a duplicate of bug 1222080 ***
https://bugs.launchpad.net/bugs/1222080

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1222080, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Tags removed: need-duplicate-check

** This bug has been marked a duplicate of bug 1222080
   package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to install/upgrade: 
run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222085

Title:
  package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to
  install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools
  exited with return code 1

Status in “linux” package in Ubuntu:
  New

Bug description:
  Occured during update

  ProblemType: Package
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-30-generic 3.8.0-30.44
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  Uname: Linux 3.8.0-27-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  elkarm 2878 F pulseaudio
   /dev/snd/seq:timidity   2699 F timidity
  Date: Sat Sep  7 09:36:18 2013
  DuplicateSignature: 
package:linux-image-3.8.0-30-generic:3.8.0-30.44:run-parts: 
/etc/kernel/postinst.d/initramfs-tools exited with return code 1
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 2
  HibernationDevice: RESUME=UUID=3abd34af-2950-49a0-bcaa-81385ddf5c50
  InstallationDate: Installed on 2010-09-25 (1077 days ago)
  InstallationMedia: Ubuntu 10.04.1 LTS Lucid Lynx - Release amd64 
(20100816.1)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. R530/R730
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic 
root=UUID=a10cc7f2-b6c4-457d-ae52-23a2be61612c ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.00-13ubuntu3
  SourcePackage: linux
  Title: package linux-image-3.8.0-30-generic 3.8.0-30.44 failed to 
install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with 
return code 1
  UpgradeStatus: Upgraded to raring on 2013-08-12 (25 days ago)
  WifiSyslog:
   
  dmi.bios.date: 03/08/2010
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: 04JD.M015.20100308.KSJ
  dmi.board.name: R530/R730
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvr04JD.M015.20100308.KSJ:bd03/08/2010:svnSAMSUNGELECTRONICSCO.,LTD.:pnR530/R730:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnR530/R730:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct10:cvrN/A:
  dmi.product.name: R530/R730
  dmi.product.version: Not Applicable
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222085/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems

2013-09-07 Thread Bogdan Iavorskyi 
i can confirm this on hp 4740s on 13.04,
tried last kernel 3.11 - problem still are, and wifi don't work.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1208257

Title:
  [HP ProBook 4540s] brightness control problems

Status in “linux” package in Ubuntu:
  Incomplete
Status in “linux” package in Baltix:
  Triaged

Bug description:
  I bought a laptop in December 2012, immediately tried to put Ubuntu
  12.10, got broken wi-fi and non-working graphics acceleration. Updated
  kernel to version 3.6, with graphic acceleration was all right, even
  partially earned wi-fi. After some time wi-fi hang, helped only
  restart the network subsystem.

  Updated kernel to 3.7, with the wi-fi was all became normal, but
  stopped working brightness control with the Fn keys. Progress bar
  indicates that the brightness changes, but in fact nothing happens.

  Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing
  changes. Upon adjustment has broken in 3.7 kernel. It turns out that
  this is a regression.

  WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor.

  ---
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA:
   country UA:
    (2402 - 2482 @ 40), (N/A, 20)
  DistroRelease: Ubuntu 13.04
  InstallationDate: Installed on 2013-08-04 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: Hewlett-Packard HP ProBook 4540s
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  raring
  Uname: Linux 3.8.0-19-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 05/20/2013
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68IRR Ver. F.41
  dmi.board.name: 17F6
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 58.1E
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP ProBook 4540s
  dmi.product.version: A1018C1100
  dmi.sys.vendor: Hewlett-Packard
  ---
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 3887 F pulseaudio
    ubuntu14062 F pulseaudio
  CRDA:
   country UA:
    (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR
    (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR
    (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130807)
  MachineType: Hewlett-Packard HP ProBook 4540s
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/username.seed boot=casper persistent 
initrd=/casper/initrd.lz splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3
  RelatedPackageVersions:
   linux-restricted-modules-3.10.0-6-generic N/A
   linux-backports-modules-3.10.0-6-generic  N/A
   linux-firmware1.113
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  saucy
  Uname: Linux 3.10.0-6-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 05/20/2013
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68IRR Ver. F.41
  dmi.board.name: 17F6
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 58.1E
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP ProBook 4540s
  dmi.product.version: A1018C1100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1208257/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net

[Kernel-packages] [Bug 1163720] Re: Brightness control broken on XPS13 with 3.8.0-16 and 3.8.0-22

2013-09-07 Thread alex 
I changed to EFI without reinstalling before, that didn't fix it.

After updating to the newest kernel it works now.

Linux mango 3.8.0-30-generic #44-Ubuntu SMP Thu Aug 22 20:52:24 UTC 2013
x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1163720

Title:
  Brightness control broken on XPS13 with 3.8.0-16 and 3.8.0-22

Status in The Linux Kernel:
  Incomplete
Status in “linux” package in Ubuntu:
  Fix Released
Status in “linux” source package in Raring:
  Fix Released

Bug description:
  Since 3.8.0-16, the brightness control doesn’t work anymore.
  The popup is displayed, so the shortcut keys do work correctly, but it has no 
effect on the actual brightness of the screen.

  Switching back to 3.8.0-15 solves the issue.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-16-generic 3.8.0-16.26
  ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5
  Uname: Linux 3.8.0-16-generic x86_64
  ApportVersion: 2.9.2-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  coucouf1837 F pulseaudio
  Date: Wed Apr  3 08:29:58 2013
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-precise-amd64-20120703-2
  HibernationDevice: RESUME=UUID=e49e9eae-f16f-45bb-ad2c-b6da5c0c6f6d
  InstallationDate: Installed on 2013-03-23 (10 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
  MachineType: Dell Inc. Dell System XPS L322X
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-16-generic 
root=UUID=3f6858e1-d8f5-44c4-b8e9-5ab8b9639ba7 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-16-generic N/A
   linux-backports-modules-3.8.0-16-generic  N/A
   linux-firmware1.104
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-04-02 (0 days ago)
  dmi.bios.date: 01/22/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A07
  dmi.board.name: 0PJHXN
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA07:bd01/22/2013:svnDellInc.:pnDellSystemXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System XPS L322X
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1163720/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1163720] Re: Brightness control broken on XPS13 with 3.8.0-16 and 3.8.0-22

2013-09-07 Thread Nikki1993 
alex, you know that by switching to EFI you did nothing? you are suppose
to not only switch mode to UEFI, but ALSO install OS in UEFI mode for
brightness to work on .29 kernel. Unfortunately, it seems like the fix
for Brightness control in BIOS mode broke the brightness in UEFI mode.
So this is kinda fix/breaking patch.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1163720

Title:
  Brightness control broken on XPS13 with 3.8.0-16 and 3.8.0-22

Status in The Linux Kernel:
  Incomplete
Status in “linux” package in Ubuntu:
  Fix Released
Status in “linux” source package in Raring:
  Fix Released

Bug description:
  Since 3.8.0-16, the brightness control doesn’t work anymore.
  The popup is displayed, so the shortcut keys do work correctly, but it has no 
effect on the actual brightness of the screen.

  Switching back to 3.8.0-15 solves the issue.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-16-generic 3.8.0-16.26
  ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5
  Uname: Linux 3.8.0-16-generic x86_64
  ApportVersion: 2.9.2-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  coucouf1837 F pulseaudio
  Date: Wed Apr  3 08:29:58 2013
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-precise-amd64-20120703-2
  HibernationDevice: RESUME=UUID=e49e9eae-f16f-45bb-ad2c-b6da5c0c6f6d
  InstallationDate: Installed on 2013-03-23 (10 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
  MachineType: Dell Inc. Dell System XPS L322X
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-16-generic 
root=UUID=3f6858e1-d8f5-44c4-b8e9-5ab8b9639ba7 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-16-generic N/A
   linux-backports-modules-3.8.0-16-generic  N/A
   linux-firmware1.104
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-04-02 (0 days ago)
  dmi.bios.date: 01/22/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A07
  dmi.board.name: 0PJHXN
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA07:bd01/22/2013:svnDellInc.:pnDellSystemXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System XPS L322X
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1163720/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222112] [NEW] coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

2013-09-07 Thread Chascon 
Public bug reported:

Symptoms:
Excessive fan use.
Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

Now on Saucy, although without any failed boots, I find the same  error
by checking dmesg:

 dmesg | grep coretemp
[   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of the 
CPU!
[   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of the 
CPU!


sudo lsmod | grep coretemp outputs coretemp   13195  0

sudo sensors -s gives no output at the moment.

I do have the coretemp listed to be loaded:

cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with # are ignored.

lp
#speedstep_centrino # kernel's job now, cpu frequency scaling
#acpi_cpufreq   # kernel's job now, cpu frequency scaling
cpufreq_ondemand #responsive, cpu frequency scaling
#cpufreq_conservative # slow, cpu frequency scaling

## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
#coretemp
lm63

## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
applesmc
coretemp


Comments  observations
I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
https://bbs.archlinux.org/viewtopic.php?id=143492
http://ww.ubuntuforums.org/showthread.php?t=814314

Interestingly, http://ubuntuforums.org/showthread.php?t=1239544 mentions
in passing  Intel's microcode update, which I find isn't applicable
considering that my fans ran fine on Natty. I find the other suggestion,
put the following into /etc/rc.local disconcerting considering that
software is supposed to accommodate defective microcode and regularly
does, but also that half a decade has come and gone with this issue.

Still, it seems most plausible that the pertinent microcode is not
loaded before the coretemp module jumps into action.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apple macbook pro

** Attachment added: version.log
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807318/+files/version.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  New

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is

[Kernel-packages] [Bug 1222111] [NEW] bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

2013-09-07 Thread GFR 
Public bug reported:

 Not surebut it was during  the  update  that there was the warning

ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
Uname: Linux 3.8.0-29-generic i686
ApportVersion: 2.0.1-0ubuntu17.4
Architecture: i386
DKMSKernelVersion: 3.8.0-30-generic
Date: Sat Sep  7 20:41:29 2013
InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
MarkForUpload: True
PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
SourcePackage: bcmwl
Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: bcmwl (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 precise

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1222111

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build

Status in “bcmwl” package in Ubuntu:
  New

Bug description:
   Not surebut it was during  the  update  that there was the
  warning

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic i686
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  DKMSKernelVersion: 3.8.0-30-generic
  Date: Sat Sep  7 20:41:29 2013
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1222111/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222111] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

2013-09-07 Thread Apport retracing service 
** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1222111

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build

Status in “bcmwl” package in Ubuntu:
  New

Bug description:
   Not surebut it was during  the  update  that there was the
  warning

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic i686
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  DKMSKernelVersion: 3.8.0-30-generic
  Date: Sat Sep  7 20:41:29 2013
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1222111/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222112] Re: coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

2013-09-07 Thread Chascon 
By the way,  the other suggestion, to put modprobe coretemp into /etc/rc.local 
doesn't work as on reboot dmesg | grep coretemp outputs the same issue:
[   45.462182] coretemp: Errata AE18 not fixed, update BIOS or microcode of the 
CPU!
[   45.462194] coretemp: Errata AE18 not fixed, update BIOS or microcode of the 
CPU!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not
  loaded before the coretemp module jumps into action.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 665163] Re: kernel panic with 'rejecting i/o to offline device'

2013-09-07 Thread HonkHase 
If I connect my DVDRW device (iomega SuperSlim DVD) via usb I get the
following entries all the time in my /var/log/syslog:

Sep  7 13:06:56 HonkBook kernel: [ 9130.303906] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:06:58 HonkBook kernel: [ 9132.349446] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:00 HonkBook kernel: [ 9134.395023] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:02 HonkBook kernel: [ 9136.440509] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:04 HonkBook kernel: [ 9138.486002] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:06 HonkBook kernel: [ 9140.531571] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:08 HonkBook kernel: [ 9142.577096] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:10 HonkBook kernel: [ 9144.622615] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:12 HonkBook kernel: [ 9146.668164] sr 6:0:0:0: rejecting I/O to 
offline device
Sep  7 13:07:14 HonkBook kernel: [ 9148.713672] sr 6:0:0:0: rejecting I/O to 
offline device

Any ideas?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/665163

Title:
  kernel panic with 'rejecting i/o to offline device'

Status in “linux” package in Ubuntu:
  Expired

Bug description:
  Hello,

  I'm experiencing kernel panics on 5 identical Ubuntu 10.04 servers.
  They are identical down to every bit of hardware and operating
  environment, They've been reliably running Debian and Ubuntu Linux
  releases for years. There's something in the latest Ubuntu 10.04
  server builds that has introduced a regression. They are used for
  heavy but sporadic CPU-bound work.

  Over the course of a day, the odds are that a singular server will
  experience a kernel. Over two days it's practically guaranteed.

  The kernel panic says:

  sd 2:0:0:0 rejecting i/o to offline device

  sd is the system drive and is most certainly online. A hard reboot
  fixes the matter for the following day or so.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-25-generic 2.6.32-25.44
  Regression: Yes
  Reproducible: No
  ProcVersionSignature: Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7
  Uname: Linux 2.6.32-25-generic x86_64
  Architecture: amd64
  Date: Fri Oct 22 16:19:50 2010
  Frequency: Once a day.
  ProcEnviron:
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: linux
  --- 
  Architecture: amd64
  DistroRelease: Ubuntu 10.04
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcEnviron:
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.32-33.72-generic 2.6.32.41+drm33.18
  Regression: Yes
  Reproducible: Yes
  Tags: lucid filesystem regression-release needs-upstream-testing
  Uname: Linux 2.6.32-33-generic x86_64
  UserGroups:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/665163/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222112] CRDA.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: CRDA.txt
   https://bugs.launchpad.net/bugs/1222112/+attachment/3807350/+files/CRDA.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] Lspci.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: Lspci.txt
   https://bugs.launchpad.net/bugs/1222112/+attachment/3807353/+files/Lspci.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] Re: coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

2013-09-07 Thread Chascon 
apport information

** Tags added: apport-collected saucy staging

** Description changed:

  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.
  
  Now on Saucy, although without any failed boots, I find the same  error
  by checking dmesg:
  
   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  
  
  sudo lsmod | grep coretemp outputs coretemp   13195  0
  
  sudo sensors -s gives no output at the moment.
  
  I do have the coretemp listed to be loaded:
  
  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.
  
  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling
  
  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63
  
  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp
  
  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314
  
  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544 mentions
  in passing  Intel's microcode update, which I find isn't applicable
  considering that my fans ran fine on Natty. I find the other suggestion,
  put the following into /etc/rc.local disconcerting considering that
  software is supposed to accommodate defective microcode and regularly
  does, but also that half a decade has come and gone with this issue.
  
- Still, it seems most plausible that the pertinent microcode is not
- loaded before the coretemp module jumps into action.
+ Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
+ --- 
+ ApportVersion: 2.12.1-0ubuntu3
+ Architecture: i386
+ AudioDevicesInUse:
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC1:  mo 3726 F pulseaudio
+  /dev/snd/controlC0:  mo 3554 F volumeicon
+   mo 3726 F pulseaudio
+ DistroRelease: Ubuntu 13.10
+ HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
+ InstallationDate: Installed on 2011-09-05 (733 days ago)
+ InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
+ MachineType: Apple Computer, Inc. MacBookPro1,1
+ MarkForUpload: True
+ Package: linux (not installed)
+ ProcFB: 0 radeondrmfb
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
+ RelatedPackageVersions:
+  linux-restricted-modules-3.11.0-4-generic N/A
+  linux-backports-modules-3.11.0-4-generic  N/A
+  linux-firmware1.113
+ StagingDrivers: zram
+ Tags:  saucy staging
+ Uname: Linux 3.11.0-4-generic i686
+ UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
+ UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
+ dmi.bios.date: 10/12/06
+ dmi.bios.vendor: Apple Computer, Inc.
+ dmi.bios.version: MBP11.88Z.0055.B08.0610121325
+ dmi.board.asset.tag: Base Board Asset Tag
+ dmi.board.name: Mac-F425BEC8
+ dmi.board.vendor: Apple Computer, Inc.
+ dmi.board.version: PVT
+ dmi.chassis.asset.tag: Asset Tag
+ dmi.chassis.type: 8
+ dmi.chassis.vendor: Apple Computer, Inc.
+ dmi.chassis.version: Mac-F425BEC8
+ dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
+ dmi.product.name: MacBookPro1,1
+ dmi.product.version: 1.0
+ dmi.sys.vendor: Apple Computer, Inc.

** Attachment added: AlsaInfo.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807348/+files/AlsaInfo.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug

[Kernel-packages] [Bug 1222112] BootDmesg.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: BootDmesg.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807349/+files/BootDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] CurrentDmesg.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807351/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] IwConfig.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: IwConfig.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807352/+files/IwConfig.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] ProcEnviron.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: ProcEnviron.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807356/+files/ProcEnviron.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] Lsusb.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: Lsusb.txt
   https://bugs.launchpad.net/bugs/1222112/+attachment/3807354/+files/Lsusb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] UdevDb.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: UdevDb.txt
   https://bugs.launchpad.net/bugs/1222112/+attachment/3807361/+files/UdevDb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] PulseList.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: PulseList.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807359/+files/PulseList.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222112] WifiSyslog.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: WifiSyslog.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807363/+files/WifiSyslog.txt

** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing

[Kernel-packages] [Bug 1222112] UdevLog.txt

2013-09-07 Thread Chascon 
apport information

** Attachment added: UdevLog.txt
   
https://bugs.launchpad.net/bugs/1222112/+attachment/3807362/+files/UdevLog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  StagingDrivers: zram
  Tags:  saucy staging
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to :

[Kernel-packages] [Bug 1222070] Re: Kernel Panic --not syncing fatal exception in interrupt

2013-09-07 Thread Chascon 
It almost goes without saying that the infrared works with LIRC.

wajig show lirc
Package: lirc
State: installed
Automatically installed: yes
Version: 0.9.0-0ubuntu3

wajig show lirc-x
Package: lirc-x  
State: installed
Automatically installed: no
Version: 0.9.0-0ubuntu3

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222070

Title:
  Kernel Panic --not syncing fatal exception in interrupt

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Using the infrared remote control results in a kernel panic. This is
  reproducible using mplayer.

  1) lsb_release -rd
  Description:  Ubuntu Saucy Salamander (development branch)
  Release:  13.10
  2) apt-cache policy linux
  linux:
Installed: (none)
Candidate: 3.11.0.4.5
Version table:
   3.11.0.4.5 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages

  uname -r
  3.11.0-4-generic

  apt-cache policy mplayer
  mplayer:
Installed: (none)
Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
Version table:
   2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
   2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
  100 /var/lib/dpkg/status

  3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.  
  4) Audio loops like a scratched record, computer hard locks so that the 
keyboard becomes entirely unresponsive: no escaping to a tty, keyboard capslock 
doesn't light up, screen goes to tty1 and outputs Kernel Panic --not syncing 
fatal exception in interrupt, and SysRq-cntrl-alt-r does not reboot the 
computer.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic i686
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3994 F pulseaudio
   /dev/snd/controlC0:  mo 3525 F volumeicon
mo 3994 F pulseaudio
   /dev/snd/pcmC0D0c:   mo 3994 F...m pulseaudio
  Date: Sat Sep  7 02:35:53 2013
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (5 days ago)
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222070/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 751453] Re: External monitor doesn't work on Toshiba Portege R600

2013-09-07 Thread Nine 
** Attachment added: apport-bug --save 751452_linux.apport on ubuntu 13.10 
image
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/751453/+attachment/3807383/+files/751453_linux.apport

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/751453

Title:
  External monitor doesn't work on Toshiba Portege R600

Status in The Linux Kernel:
  Incomplete
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  In summary, when an external monitor is not connected at boot, I can't
  get the laptop to drive an external monitor. This is a problem in
  Ubuntu Lucid (10.04) but it was not a problem in the Ubuntu Hardy
  (8.04).

  This appears to be a problem with the mainline kernel. I have
  submitted a report at:
  https://bugzilla.kernel.org/show_bug.cgi?id=31292

  WORKAROUND: In the BIOS change Power on Display from auto-selected
  to LCD+Analog RGB.

  External monitor not connected at boot
  --

  * External monitor can be seen in Monitor preferences, but laptop
    does not drive external monitor

  $ xrandr -q
  Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
  VGA1 connected (normal left inverted right x axis y axis)
     1360x768   59.8
     1024x768   60.0
     800x60060.3 56.2
     848x48060.0
     640x48059.9 59.9
  LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1280x800   60.2*+
     1024x768   85.0 75.0 70.1 60.0
     832x62474.6
     800x60085.1 72.2 75.0 60.3 56.2
     640x48085.0 72.8 75.0 59.9
     720x40085.0
     640x40085.1
     640x35085.1
  DVI1 disconnected (normal left inverted right x axis y axis)

  * Mirror screens in Monitor preferences appears to switch
    resolution, but the external monitor is not driven. In this case
    xrandr reports:

  $ xrandr -q
  Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
  VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1360x768   59.8
     1024x768   60.0*
     800x60060.3 56.2
     848x48060.0
     640x48059.9 59.9
  LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1280x800   60.2 +
     1024x768   85.0 75.0 70.1 60.0*
     832x62474.6
     800x60085.1 72.2 75.0 60.3 56.2
     640x48085.0 72.8 75.0 59.9
     720x40085.0
     640x40085.1
     640x35085.1
  DVI1 disconnected (normal left inverted right x axis y axis)

  * I can't use toshset to connect external monitor:

  $ sudo toshset -video both

  This makes the screen go blank and the  external monitor is not
  driven. I can recover switching to VT1 and typing sudo toshset -video int.

  * Changning the output using the proc file system does not appear to
    work as it should (See http://memebeam.org/toys/ToshibaAcpiDriver
    and http://memebeam.org/toys/ToshibaAcpiVideo) :

  # cat /proc/acpi/toshiba/video
  lcd_out: 1
  crt_out: 0
  tv_out:  0
  # echo crt_out:1  /proc/acpi/toshiba/video
  # cat /proc/acpi/toshiba/video
  lcd_out: 1
  crt_out: 0
  tv_out:  0

  Workaround: External monitor connected at boot
  --

  The external screen is driven automatically. The resolution of the
  laptop screen is adjusted to match the external monitor.

  It's not possible to turn off the monitor using the proc filesystem:

  # cat /proc/acpi/toshiba/video
  lcd_out: 0
  crt_out: 1
  tv_out:  0
  root@bancroftmill:/home/dcs# echo crt_out:0  /proc/acpi/toshiba/video
  root@bancroftmill:/home/dcs# cat /proc/acpi/toshiba/video
  lcd_out: 0
  crt_out: 1
  tv_out:  0

  It is possible to switch using the Monitor preferences tool.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-30-generic 2.6.32-30.59
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13
  Uname: Linux 2.6.32-30-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  AplayDevices:
    List of PLAYBACK Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   

[Kernel-packages] [Bug 1163720] Re: Brightness control broken on XPS13 with 3.8.0-16 and 3.8.0-22

2013-09-07 Thread martin 
arf, yes, thank you Bib, but that's what I mean :
 
- kernel 3.8.0-29 : everything ok, brightness is adjustable, with Fn+F4/F5 or 
via a XFCE widget

- kernel 3.8.0-30 : nothing work, brightness always minimum, Fn+F4/F5
doesn't work, XFCE widget doesn't work.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1163720

Title:
  Brightness control broken on XPS13 with 3.8.0-16 and 3.8.0-22

Status in The Linux Kernel:
  Incomplete
Status in “linux” package in Ubuntu:
  Fix Released
Status in “linux” source package in Raring:
  Fix Released

Bug description:
  Since 3.8.0-16, the brightness control doesn’t work anymore.
  The popup is displayed, so the shortcut keys do work correctly, but it has no 
effect on the actual brightness of the screen.

  Switching back to 3.8.0-15 solves the issue.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-16-generic 3.8.0-16.26
  ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5
  Uname: Linux 3.8.0-16-generic x86_64
  ApportVersion: 2.9.2-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  coucouf1837 F pulseaudio
  Date: Wed Apr  3 08:29:58 2013
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-precise-amd64-20120703-2
  HibernationDevice: RESUME=UUID=e49e9eae-f16f-45bb-ad2c-b6da5c0c6f6d
  InstallationDate: Installed on 2013-03-23 (10 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
  MachineType: Dell Inc. Dell System XPS L322X
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-16-generic 
root=UUID=3f6858e1-d8f5-44c4-b8e9-5ab8b9639ba7 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-16-generic N/A
   linux-backports-modules-3.8.0-16-generic  N/A
   linux-firmware1.104
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-04-02 (0 days ago)
  dmi.bios.date: 01/22/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A07
  dmi.board.name: 0PJHXN
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA07:bd01/22/2013:svnDellInc.:pnDellSystemXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System XPS L322X
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1163720/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1129511] Re: Unable to boot system unless acpi=off quiet splash deleted from grub

2013-09-07 Thread Lou Hurst 
Update,

I had a bad USB stick so -

With machine BIOS updated to the latest version -

I am not able to boot the machine in EFI with any flavor of Ubuntu back
to 12.04, up to and including yesterday's (9/6/2013) build of Saucy.

With BIOS set to Legacy I AM able to boot the machine into any flavor of
Ubuntu up to and including yesterday's (9/6/2013) build of Saucy, with
no extra work involved - it works as designed.

Thanks!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1129511

Title:
  Unable to boot system unless acpi=off  quiet splash deleted from
  grub

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70
  -0NC-494US Am not running as a dual boot install. I unable to boot
  this system unless acpi=off and quiet splash is deleted from grub. I
  am running this as the only OS, NOT a dual boot. I am able to boot,
  install and run 12.04 Precise 64 bit on this system, BIOS in legacy
  mode for install and running from HDD. Following steps in Debugging
  ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have
  updated to the latest BIOS on the box.

  WORKAROUND: Use legacy boot mode.

  WORKAROUND: With 12.10 installed to HDD tried booting with all options
  given in the Wiki and with acpi=off and quiet splash deleted, system
  boots ok and into usable environment.

  With acpi=noirq and quiet splash deleted system starts to boot and stops 
with the following as last line:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With pnpacpi=off and quiet splash deleted system starts to boot and stops 
with the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With noapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With nolapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  In the troubleshooting steps I was unable to suspend or hibernate the
  system so am unable to supply a /var/log/kern.log.0 file.

  I am unable to include a tarball of /proc/acpi directory as that
  directory doesn't exist.

  ---
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lou1920 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Micro-Star International Co., Ltd. GT70
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic 
root=/dev/mapper/ubuntu-root ro acpi=off
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts_pstor
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-17-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1762IMS.50U
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1762
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A:
  dmi.product.name: GT70
  dmi.product.version: REV:1.0
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1188965] AlsaDevices.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: AlsaDevices.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807416/+files/AlsaDevices.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] Re: [hp mini 210-1000] touchpad jump when try to select element

2013-09-07 Thread Stefano Statuti 
apport information

** Tags added: oneiric staging

** Description changed:

  hi,
  
  i have this problem from 12.04 to 13.04
  
  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!
  
  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
  
  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
+ --- 
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
+ AplayDevices:
+   List of PLAYBACK Hardware Devices 
+  card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
+Subdevices: 1/1
+Subdevice #0: subdevice #0
+ ApportVersion: 1.23-0ubuntu3
+ Architecture: i386
+ ArecordDevices:

[Kernel-packages] [Bug 1188965] Card0.Amixer.values.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: Card0.Amixer.values.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807418/+files/Card0.Amixer.values.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version:

[Kernel-packages] [Bug 1188965] BootDmesg.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: BootDmesg.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807417/+files/BootDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] Card0.Codecs.codec.0.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: Card0.Codecs.codec.0.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807419/+files/Card0.Codecs.codec.0.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version:

[Kernel-packages] [Bug 1188965] UdevLog.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: UdevLog.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807430/+files/UdevLog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor:

[Kernel-packages] [Bug 1188965] Lspci.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: Lspci.txt
   https://bugs.launchpad.net/bugs/1188965/+attachment/3807422/+files/Lspci.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor:

[Kernel-packages] [Bug 1188965] IwConfig.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: IwConfig.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807421/+files/IwConfig.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] Lsusb.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: Lsusb.txt
   https://bugs.launchpad.net/bugs/1188965/+attachment/3807423/+files/Lsusb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor:

[Kernel-packages] [Bug 1188965] WifiSyslog.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: WifiSyslog.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807431/+files/WifiSyslog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] CurrentDmesg.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807420/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] UdevDb.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: UdevDb.txt
   https://bugs.launchpad.net/bugs/1188965/+attachment/3807429/+files/UdevDb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor:

[Kernel-packages] [Bug 1188965] PciMultimedia.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: PciMultimedia.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807424/+files/PciMultimedia.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] ProcModules.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: ProcModules.txt
   
https://bugs.launchpad.net/bugs/1188965/+attachment/3807427/+files/ProcModules.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030

[Kernel-packages] [Bug 1188965] RfKill.txt

2013-09-07 Thread Stefano Statuti 
apport information

** Attachment added: RfKill.txt
   https://bugs.launchpad.net/bugs/1188965/+attachment/3807428/+files/RfKill.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1188965

Title:
  [hp mini 210-1000] touchpad jump when try to select element

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  hi,

  i have this problem from 12.04 to 13.04

  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!

  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
  --- 
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.26
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.24:bd03/18/2011:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.26:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor:

[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer HDD external can't wake up after a moment of time

2013-09-07 Thread Christopher M. Penalver 
Chris, it would be best to further parse down this report from:
USB Printer  HDD external can't wake up after a moment of time

to one of either:
USB Printer needs replug to work after boot

or:
External HDD takes 10/20 seconds after wake up after standby.

This is how triaging one device at a time on a report will allow one to
find a fix faster than attempting two poorly. Hence, which one device
and corresponding problem would you like to focus on here? As well, a
new report would be made focusing on the other device and it's specific
problem.

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1159358

Title:
  [HP Pavillion dm3-1109TU] USB Printer  HDD external can't wake up
  after a moment of time

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  While working a moment on LibreOffice Calc found that facts:
  - LO hangs for a while after execute save. And I found that my 0bc2:2300 
Seagate USB HDD was not working. (file that I used to work  execute save 
located on the USB HDD). Take a long time for the HDD to wake up again.
  - Print job was pending (printer not printing). Found that the printer was 
not working. Usually if the problem persists, plug out the USB cable and then 
plug in again. I don't find any solution other than replugging printer USB 
cable to wake up the printer.

  HP Pavillion dm3-1109TU
  Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint 
v5.2.8-pre1)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: xorg 1:7.6+12ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39
  Uname: Linux 3.2.0-39-generic-pae i686
  .tmp.unity.support.test.0:

  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  CompizPlugins: 
[core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale]
  CompositorRunning: compiz
  Date: Sun Mar 24 15:55:26 2013
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, even including gdb or git bisection work if 
needed
  GraphicsCard:
   Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller 
[8086:2a42] (rev 07) (prog-if 00 [VGA controller])
     Subsystem: Hewlett-Packard Company Device [103c:3649]
     Subsystem: Hewlett-Packard Company Device [103c:3649]
  InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 
(20120817.3)
  MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC
  MarkForUpload: True
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.utf8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae 
root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash 
vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/16/2010
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: F.19
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3649
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 41.3D
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Pavilion dm3 Notebook PC
  dmi.product.version: 048711241F1011012
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.7.12-0ubuntu1
  version.libdrm2: libdrm2 2.4.39-0ubuntu0.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1197491] Re: [DELL Inspiron 15z 5523] touchpad not recognised

2013-09-07 Thread Christopher M. Penalver 
Giacomo Rosati, could you please test the latest mainline kernel via
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.11-saucy/ and advise on
the results?

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1197491

Title:
  [DELL Inspiron 15z 5523] touchpad not recognised

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Both in Ubuntu 12.04 and 13.04 touchpad is not recognised on DELL inspiron 
15z 5523. The output of xinput is PS/2 generic mouse. The touchpad is not 
working at all. Except sometimes the cursor moves randomly.
  ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25.
  ApportVersion: 2.0.1-0ubuntu17.3
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  jack-stable   1807 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xf7a1 irq 47'
     Mixer name : 'Intel PantherPoint HDMI'
     Components : 'HDA:111d76e0,1028058f,00100303 
HDA:80862806,80860101,0010'
     Controls  : 23
     Simple ctrls  : 10
  DistroRelease: Ubuntu 12.04
  HibernationDevice: RESUME=UUID=ec4d058c-8f1a-4bb2-b425-6aeb3fa0f6f5
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64 
(20130213)
  MachineType: Dell Inc. Inspiron 5523
  MarkForUpload: True
  NonfreeKernelModules: wl
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-34-generic 
root=UUID=bd5ed224-ed7b-401b-88a8-2c55f4cda06b ro acpi_backlight=vendor 
dell_laptop.backlight=0 quiet splash
  ProcVersionSignature: Ubuntu 3.5.0-34.55~precise1-generic 3.5.7.13
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-34-generic N/A
   linux-backports-modules-3.5.0-34-generic  N/A
   linux-firmware1.79.4
  StagingDrivers: rts5139
  Tags:  precise running-unity staging
  Uname: Linux 3.5.0-34-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 01/29/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A03
  dmi.board.name: 0G9PXN
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A03
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnDellInc.:bvrA03:bd01/29/2013:svnDellInc.:pnInspiron5523:pvrNotSpecified:rvnDellInc.:rn0G9PXN:rvrA03:cvnDellInc.:ct8:cvrNotSpecified:
  dmi.product.name: Inspiron 5523
  dmi.product.version: Not Specified
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1197491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1221876] Re: Driver rt2800pci doesn't work, WiFi logout and login continuously

2013-09-07 Thread Christopher M. Penalver 
** Description changed:

- After connecting to a local wifi network, Ubuntu 13.04 will log out randomly. 
+ After connecting to a local wifi network, Ubuntu 13.04 will log out randomly.
  Driver rt2800pci doesn't work, WiFi logout and login continuously.
  2 out of 3 times I am able to turn of the wifi, then turn it back on and 
connect. One third of the time it disconnects and will not re-enter despite 
restarting, forgetting network, configuring network, ect. This has occurred on 
multiple different wifi networks and routers. I have a Asus laptop.
- Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe. 
+ Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe.
  I tried to download and install 3.10 kernel, but the problem is the same.
- 
- I wrote on a terminal: sudo lspci and the output is:
- 
- ambra@kina:~$ sudo lspci
- 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family 
DRAM Controller (rev 09)
- 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core 
Processor Family Integrated Graphics Controller (rev 09)
- 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family 
USB xHCI Host Controller (rev 04)
- 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series 
Chipset Family MEI Controller #1 (rev 04)
- 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family 
USB Enhanced Host Controller #2 (rev 04)
- 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family 
High Definition Audio Controller (rev 04)
- 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI 
Express Root Port 1 (rev c4)
- 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI 
Express Root Port 2 (rev c4)
- 00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI 
Express Root Port 4 (rev c4)
- 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family 
USB Enhanced Host Controller #1 (rev 04)
- 00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller 
(rev 04)
- 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port 
SATA Controller [AHCI mode] (rev 04)
- 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus 
Controller (rev 04)
- 02:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
- 03:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)
- ambra@kina:~$ 
- 
- Thank you, Adriana.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-30-generic 3.8.0-30.44
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.4
  Architecture: amd64
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC0:  ambra  3894 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  ambra  3894 F pulseaudio
  Date: Fri Sep  6 20:01:13 2013
  HibernationDevice: RESUME=UUID=705401ee-af26-4c2a-95e5-410ecbc4b319
  InstallationDate: Installed on 2013-06-03 (95 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: ASUSTeK COMPUTER INC. X55A
  MarkForUpload: True
  ProcEnviron:
-  TERM=xterm
-  PATH=(custom, no user)
-  XDG_RUNTIME_DIR=set
-  LANG=it_IT.UTF-8
-  SHELL=/bin/bash
+  TERM=xterm
+  PATH=(custom, no user)
+  XDG_RUNTIME_DIR=set
+  LANG=it_IT.UTF-8
+  SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic 
root=UUID=9f89f8a0-ac6b-4eae-8aa1-f53eb9bdbd63 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
-  linux-restricted-modules-3.8.0-30-generic N/A
-  linux-backports-modules-3.8.0-30-generic  N/A
-  linux-firmware1.106
+  linux-restricted-modules-3.8.0-30-generic N/A
+  linux-backports-modules-3.8.0-30-generic  N/A
+  linux-firmware1.106
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/20/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X55A.413
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X55A
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX55A.413:bd08/20/2012:svnASUSTeKCOMPUTERINC.:pnX55A:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX55A:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X55A
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

** Summary changed:

- Driver rt2800pci doesn't work, WiFi logout and login continuously
+ 1814:5390 Driver rt2800pci doesn't work, WiFi logout and login continuously

** Summary changed:

- 1814:5390 Driver rt2800pci doesn't work, WiFi logout and login

[Kernel-packages] [Bug 1189142] Re: Broken suspend for i915 with newer kernels

2013-09-07 Thread Christopher M. Penalver 
Aurelijus Rinkevicius, if you disable the discrete AMD graphics card in BIOS, 
and remove:
pcie_aspm=force
i915.i915_enable_rc6=1
radeon.dpm=1

would anything change when attempting suspend with
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.11-saucy/ ?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1189142

Title:
  Broken suspend for i915 with newer kernels

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I am running a Kubuntu 13.04 on a Sandybridge (Intel HD3000) + unused
  AMD HD 6630M. Suspend seems to be broken with newer kernels. The last
  working kernel seems to be ubuntu flavor of 3.8.0-23-generic. The
  newer kernels 3.8.0-24-generic+ and tested generic 3.9.4, 3.10rc4 seem
  to be broken.

  System does not come back up from a sleep. Gets a blank screen and a fan at 
max.
  --- 
  ApportVersion: 2.9.2-0ubuntu8.4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  odysei 2423 F pulseaudio
   /dev/snd/pcmC0D0p:   odysei 2423 F...m pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=8a51a66b-afc7-4aba-af08-adc76ae7bd7a
  InstallationDate: Installed on 2012-04-26 (495 days ago)
  InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120423)
  MachineType: Sony Corporation VPCSE190X
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic 
root=UUID=c62018f2-c2bb-4c89-9cba-41700f4452e0 ro pcie_aspm=force 
i915.i915_enable_rc6=1 radeon.dpm=1 quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-25.37-generic 3.8.13
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-25-generic N/A
   linux-backports-modules-3.8.0-25-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-25-generic x86_64
  UpgradeStatus: Upgraded to raring on 2013-04-27 (130 days ago)
  UserGroups: adm cdrom debian-tor dip lp lpadmin plugdev sambashare sudo
  dmi.bios.date: 06/15/2012
  dmi.bios.vendor: INSYDE
  dmi.bios.version: R2087H4
  dmi.board.asset.tag: N/A
  dmi.board.name: VAIO
  dmi.board.vendor: Sony Corporation
  dmi.board.version: N/A
  dmi.chassis.asset.tag: N/A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Sony Corporation
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnINSYDE:bvrR2087H4:bd06/15/2012:svnSonyCorporation:pnVPCSE190X:pvrC609YTLP:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A:
  dmi.product.name: VPCSE190X
  dmi.product.version: C609YTLP
  dmi.sys.vendor: Sony Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1189142/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1129511] Re: Unable to boot system unless acpi=off quiet splash deleted from grub

2013-09-07 Thread Lou Hurst 
Originally purchased with Win 8, no other OS.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1129511

Title:
  Unable to boot system unless acpi=off  quiet splash deleted from
  grub

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70
  -0NC-494US Am not running as a dual boot install. I unable to boot
  this system unless acpi=off and quiet splash is deleted from grub. I
  am running this as the only OS, NOT a dual boot. I am able to boot,
  install and run 12.04 Precise 64 bit on this system, BIOS in legacy
  mode for install and running from HDD. Following steps in Debugging
  ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have
  updated to the latest BIOS on the box.

  WORKAROUND: Use legacy boot mode.

  WORKAROUND: With 12.10 installed to HDD tried booting with all options
  given in the Wiki and with acpi=off and quiet splash deleted, system
  boots ok and into usable environment.

  With acpi=noirq and quiet splash deleted system starts to boot and stops 
with the following as last line:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With pnpacpi=off and quiet splash deleted system starts to boot and stops 
with the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With noapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With nolapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  In the troubleshooting steps I was unable to suspend or hibernate the
  system so am unable to supply a /var/log/kern.log.0 file.

  I am unable to include a tarball of /proc/acpi directory as that
  directory doesn't exist.

  ---
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lou1920 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Micro-Star International Co., Ltd. GT70
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic 
root=/dev/mapper/ubuntu-root ro acpi=off
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts_pstor
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-17-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1762IMS.50U
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1762
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A:
  dmi.product.name: GT70
  dmi.product.version: REV:1.0
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1004975] Re: upstart needs more than 100 seconds to start a desktop

2013-09-07 Thread Christopher M. Penalver 
Stefan Pappalardo, thank you for taking the time to report this bug and
helping to make Ubuntu better. However, I am closing it because the bug
has been fixed in the latest development version of Ubuntu - Saucy
Salamander.

This is a significant bug in Ubuntu. If you need a fix for the bug in
previous versions of Ubuntu, please perform as much as possible of the
SRU Procedure [1] to bring the need to a developer's attention.

[1]: https://wiki.ubuntu.com/StableReleaseUpdates#Procedure

** Changed in: linux (Ubuntu)
   Status: Incomplete = Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1004975

Title:
  upstart needs more than 100 seconds to start a desktop

Status in “linux” package in Ubuntu:
  Fix Released

Bug description:
  When turning on my desktop I expect to wait from 25 to 30 seconds
  until the login screen appears.

  But I have to wait more than 100 seconds until the login screen
  appears (look at the bootchart attachment).

  Is there any I can do to improve the boot time?

  Thank you

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: upstart 1.5-0ubuntu7
  ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16
  Uname: Linux 3.2.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  Date: Sat May 26 21:58:36 2012
  EcryptfsInUse: Yes
  SourcePackage: upstart
  UpgradeStatus: Upgraded to precise on 2012-05-15 (11 days ago)
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu15
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  sjuk   3967 F pulseaudio
   /dev/snd/controlC0:  sjuk   3967 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xfbcf4000 irq 16'
 Mixer name : 'VIA VT1818S'
 Components : 'HDA:11060440,10438417,0010'
 Controls  : 46
 Simple ctrls  : 23
  Card1.Amixer.info:
   Card hw:1 'NVidia'/'HDA NVidia at 0xfe97c000 irq 19'
 Mixer name : 'Nvidia GPU 12 HDMI/DP'
 Components : 'HDA:10de0012,10de0101,00100100'
 Controls  : 24
 Simple ctrls  : 4
  DistroRelease: Ubuntu 12.04
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=f41ab4fa-62ec-4fee-8abf-d80b2d9f1401
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  MachineType: System manufacturer System Product Name
  MarkForUpload: True
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic 
root=UUID=2a7737e5-1a4f-4465-be2d-2a2107c9268e ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-32-generic N/A
   linux-backports-modules-3.2.0-32-generic  N/A
   linux-firmware1.79.1
  RfKill:
   0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
  Tags:  precise running-unity
  Uname: Linux 3.2.0-32-generic x86_64
  UpgradeStatus: Upgraded to precise on 2012-05-15 (187 days ago)
  UserGroups: adm admin audio cdrom chipcard cyberjack dialout dip disk fax 
floppy fuse lpadmin mythtv netdev plugdev powerdev sambashare scanner tape 
video voice
  WifiSyslog:
   
  dmi.bios.date: 03/08/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 2001
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: M4A87TD EVO
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr2001:bd03/08/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A87TDEVO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1004975/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 907555] Re: Brightness-Troubles with Acer Travelmate 8481TG

2013-09-07 Thread Christopher M. Penalver 
misko, quick question, regarding your BIOS version, where did you go
specifically to update the BIOS? I checked Acer's website, and all the
versions are v1.xy, while your Bug Description notes v2.xy.

** Tags removed: kernel-bug-exists-upstream
** Tags added: needs-upstream-testing

** Description changed:

  On an Acer Travelmate 8481TG using the default-config, the screen's
  brightness can't be controlled (with Fn+cursor-key), altought the event
  is recognized (and displayed in a popup in the upper right corner of the
  screen).
  
  With the kernel-parameter acpi_backlight=vendor the brightness-control
  works (with Function-Key), but then another problem arises: When the
  screen is switched of via DPMS (automatically after 10 minutes, or
  manually with xset dpms force off), it can't be reactivated by moving
  the mouse or pressing any key (as without acpi_backlight=vendor),
  instead the screen has to be reactivated with the brightnes-control-keys
  (which does not work while the screen is locked).
  
+ WORKAROUND: acpi_backlight=vendor
+ 
  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: linux-image-3.0.0-14-generic 3.0.0-14.23
  ProcVersionSignature: Ubuntu 3.0.0-14.23-generic 3.0.9
  Uname: Linux 3.0.0-14-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  AplayDevices:
-   List of PLAYBACK Hardware Devices 
-  card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
-Subdevices: 1/1
-Subdevice #0: subdevice #0
+   List of PLAYBACK Hardware Devices 
+  card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
+    Subdevices: 1/1
+    Subdevice #0: subdevice #0
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  ArecordDevices:
-   List of CAPTURE Hardware Devices 
-  card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
-Subdevices: 1/1
-Subdevice #0: subdevice #0
+   List of CAPTURE Hardware Devices 
+  card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog]
+    Subdevices: 1/1
+    Subdevice #0: subdevice #0
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC0:  misko  1757 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  misko  1757 F pulseaudio
  CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
  Card0.Amixer.info:
-  Card hw:0 'PCH'/'HDA Intel PCH at 0xd3c0 irq 45'
-Mixer name : 'Realtek ALC271X'
-Components : 'HDA:10ec0269,10250567,00100100'
-Controls  : 14
-Simple ctrls  : 9
+  Card hw:0 'PCH'/'HDA Intel PCH at 0xd3c0 irq 45'
+    Mixer name : 'Realtek ALC271X'
+    Components : 'HDA:10ec0269,10250567,00100100'
+    Controls  : 14
+    Simple ctrls  : 9
  Date: Wed Dec 21 23:11:30 2011
  HibernationDevice: RESUME=UUID=d7575c4e-9a01-4e85-9867-c0dd51aedfed
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012)
  MachineType: Acer TravelMate 8481TG
  ProcEnviron:
-  LANGUAGE=de_AT:de
-  PATH=(custom, no user)
-  LANG=de_AT.UTF-8
-  SHELL=/bin/bash
+  LANGUAGE=de_AT:de
+  PATH=(custom, no user)
+  LANG=de_AT.UTF-8
+  SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic 
root=UUID=f7b72e2b-e9bc-49a1-8b42-4e4f726f787a ro i915.i915_enable_rc6=1 quiet 
splash vt.handoff=7
  RelatedPackageVersions:
-  linux-restricted-modules-3.0.0-14-generic N/A
-  linux-backports-modules-3.0.0-14-generic  N/A
-  linux-firmware1.60
+  linux-restricted-modules-3.0.0-14-generic N/A
+  linux-backports-modules-3.0.0-14-generic  N/A
+  linux-firmware1.60
  RfKill:
-  0: phy0: Wireless LAN
-   Soft blocked: no
-   Hard blocked: no
+  0: phy0: Wireless LAN
+   Soft blocked: no
+   Hard blocked: no
  SourcePackage: linux
  StagingDrivers: rts_pstor mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/28/2011
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.06
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: BA41_HS
  dmi.board.vendor: Acer
  dmi.board.version: Base Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.06
  dmi.modalias: 
dmi:bvnAcer:bvrV2.06:bd10/28/2011:svnAcer:pnTravelMate8481TG:pvrV2.06:rvnAcer:rnBA41_HS:rvrBaseBoardVersion:cvnAcer:ct10:cvrV2.06:
  dmi.product.name: TravelMate 8481TG
  dmi.product.version: V2.06
  dmi.sys.vendor: Acer
- --- 
+ ---
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC1:  ubuntu 2750 F pulseaudio
-  /dev/snd/controlC0:  ubuntu 2750 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC1:  ubuntu 2750 F pulseaudio
+  /dev/snd/controlC0:  ubuntu 2750 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha

[Kernel-packages] [Bug 1173681] Re: 168c:002b AR9285 ath9k not working after updating to ubuntu 13.04 Raring (linux 3.8.0-19-generic)

2013-09-07 Thread Christopher M. Penalver 
Pixolex, latest mainline kernel is now http://kernel.ubuntu.com/~kernel-
ppa/mainline/v3.11-saucy/ . Could you please test with this and advise
on the results?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1173681

Title:
  168c:002b AR9285 ath9k not working after updating to ubuntu 13.04
  Raring (linux 3.8.0-19-generic)

Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  update: updated the BIOS to the latest version but the problem
  persists.

  Booting with the older kernel (latest linux kernel from 12.10) every thing 
works fine:
  *-network
     descrição: Interface sem fio
     produto: AR9285 Wireless Network Adapter (PCI-Express)
     fabricante: Atheros Communications Inc.
     ID físico: 0
     informações do barramento: pci@:06:00.0
     nome lógico: wlan1
     versão: 01
     serial: 00:08:ca:9d:e5:01
     largura: 64 bits
     clock: 33MHz
     capacidades: pm msi pciexpress bus_master cap_list ethernet physical 
wireless
     configuração: broadcast=yes driver=ath9k 
driverversion=3.5.0-28-generic firmware=N/A ip=192.168.0.192 latency=0 link=yes 
multicast=yes wireless=IEEE 802.11bgn
     recursos: irq:19 memória:fe80-fe80

  0: asus-wlan: Wireless LAN
   Soft blocked: no
   Hard blocked: no
  1: phy0: Wireless LAN
   Soft blocked: no
   Hard blocked: no

  After upgrading to Raring Ringtail Ubuntu 13.04, with the new kernel,
  hardware get blocked/disabled and wireless doesn't work:

  *-network DESABILITADO
     descrição: Interface sem fio
     produto: AR9285 Wireless Network Adapter (PCI-Express)
     fabricante: Atheros Communications Inc.
     ID físico: 0
     informações do barramento: pci@:06:00.0
     nome lógico: wlan1
     versão: 01
     serial: 00:08:ca:9d:e5:01
     largura: 64 bits
     clock: 33MHz
     capacidades: pm msi pciexpress bus_master cap_list ethernet physical 
wireless
     configuração: broadcast=yes driver=ath9k 
driverversion=3.8.0-19-generic firmware=N/A latency=0 link=no multicast=yes 
wireless=IEEE 802.11bgn
     recursos: irq:19 memória:fe80-fe80

  0: phy0: Wireless LAN
   Soft blocked: no
   Hard blocked: yes
  1: asus-wlan: Wireless LAN
   Soft blocked: no
   Hard blocked: no

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-19-generic 3.8.0-19.29
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  Uname: Linux 3.8.0-19-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  x  1822 F pulseaudio
  CurrentDmesg:
   [  370.100280] r8169 :04:00.2 eth1: link up
   [  370.100322] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
   [  891.718748] systemd-hostnamed[2649]: Warning: nss-myhostname is not 
installed. Changing the local hostname might make it unresolveable. Please 
install nss-myhostname!
   [14119.241628] rtsx_pci :04:00.0: vpd r/w failed.  This is likely a 
firmware bug on this device.  Contact the card vendor for a firmware update.
  Date: Sat Apr 27 17:31:51 2013
  HibernationDevice: RESUME=UUID=e417e9f2-b63e-4b79-9be4-c21f55547205
  InstallationDate: Installed on 2012-07-13 (287 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  MachineType: ASUSTeK Computer Inc. U32U
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=3ad9d88b-a7a5-460f-ba15-a78dd7f2fc94 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-04-27 (0 days ago)
  dmi.bios.date: 12/16/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: U32U.204
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: U32U
  dmi.board.vendor: ASUSTeK Computer Inc.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK Computer Inc.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrU32U.204:bd12/16/2011:svnASUSTeKComputerInc.:pnU32U:pvr1.0:rvnASUSTeKComputerInc.:rnU32U:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0:
  dmi.product.name: U32U
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK Computer Inc.
  --- 
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: amd64
  DistroRelease: Ubuntu 13.04
  InstallationDate: Installed on 2012-07-13 (291 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  MarkForUpload: True
  Package: linux (not installed)
  Tags:  raring
  Uname: Linux

[Kernel-packages] [Bug 968675] Re: Kernel Panic during system startup

2013-09-07 Thread Christopher M. Penalver 
misko, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/968675/comments/18
regarding this being fixed with an update. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/968675

Title:
  Kernel Panic during system startup

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  Since the update to 3.0.0-17-generic my notebook sometimes crashes
  when booting up.

  My system is an Acer Travelmate 8481TG.

  The file linux-image-3.0.0-17-generic.0.crash is attached, the bt -a
  produced by crash is:

  PID: 0  TASK: 81c0b020  CPU: 0   COMMAND: swapper
   #0 [88023fa03a50] machine_kexec at 8102de18
   #1 [88023fa03ad0] crash_kexec at 810aa142
   #2 [88023fa03ba0] oops_end at 815f4358
   #3 [88023fa03bd0] no_context at 815dbacf
   #4 [88023fa03c10] __bad_area_nosemaphore at 815dbc6a
   #5 [88023fa03c60] bad_area_nosemaphore at 815dbca0
   #6 [88023fa03c70] do_page_fault at 815f6c7d
   #7 [88023fa03d80] page_fault at 815f3695
  [exception RIP: azx_update_rirb+100]
  RIP: a0fc54f4  RSP: 88023fa03e38  RFLAGS: 00010002
  RAX: 0002  RBX: 88020d867c00  RCX: 
  RDX: 0003  RSI: 88020d867c00  RDI: 88020d867c00
  RBP: 88023fa03e58   R8: 88022e662700   R9: 88023ec000a0
  R10: 0cf3  R11: 0400  R12: 00ff
  R13:   R14:   R15: 88020d867c44
  ORIG_RAX:   CS: 0010  SS: 0018
   #8 [88023fa03e60] azx_interrupt at a0fc60c7 [snd_hda_intel]
   #9 [88023fa03eb0] handle_irq_event_percpu at 810cde75
  #10 [88023fa03f10] handle_irq_event at 810ce08e
  #11 [88023fa03f40] handle_fasteoi_irq at 810d0854
  #12 [88023fa03f60] handle_irq at 8100c252
  #13 [88023fa03f80] do_IRQ at 815fcdaa
  --- IRQ stack ---
  #14 [81c01d80] ret_from_intr at 815f33d3
  RIP: ff76  RSP: 0202  RFLAGS: 0010
  RAX: fffb  RBX: 81c01e88  RCX: 
  RDX:   RSI: 0c94  RDI: 
  RBP: 815f33ce   R8: 0e3b   R9: 0cf3
  R10: 0400  R11: 81032a79  R12: 81c01e48
  R13: 81012e51  R14: 88023fa0ebc0  R15: 8104c9ae
  ORIG_RAX: 003124ad  CS: 8134b29b  SS: 81c01e38
  bt: WARNING: possibly bogus exception frame

  PID: 0  TASK: 880232c48000  CPU: 1   COMMAND: kworker/0:0
   #0 [88023fa47e70] crash_nmi_callback at 81026268
   #1 [88023fa47e80] notifier_call_chain at 815f6dbd
   #2 [88023fa47ec0] atomic_notifier_call_chain at 815f6e1a
   #3 [88023fa47ed0] notify_die at 815f6e4e
   #4 [88023fa47f00] default_do_nmi at 815f3b19
   #5 [88023fa47f30] do_nmi at 815f3ed0
   #6 [88023fa47f50] nmi at 815f3950
  [exception RIP: intel_idle+157]
  RIP: 8134b26d  RSP: 880232c51e58  RFLAGS: 0046
  RAX: 0030  RBX: 0010  RCX: 0001
  RDX:   RSI: 880232c51fd8  RDI: 81c0ea00
  RBP: 880232c51ea8   R8: fffb   R9: 0f9b
  R10: 1a87  R11: 0001  R12: 0030
  R13: 127feead05305e7c  R14: 0001  R15: 
  ORIG_RAX:   CS: 0010  SS: 0018
  --- NMI exception stack ---
   #7 [880232c51e58] intel_idle at 8134b26d
   #8 [880232c51eb0] cpuidle_idle_call at 814b387d
   #9 [880232c51f00] cpu_idle at 8100920b

  PID: 0  TASK: 880232c4dc80  CPU: 2   COMMAND: kworker/0:1
   #0 [88023fa87e70] crash_nmi_callback at 81026268
   #1 [88023fa87e80] notifier_call_chain at 815f6dbd
   #2 [88023fa87ec0] atomic_notifier_call_chain at 815f6e1a
   #3 [88023fa87ed0] notify_die at 815f6e4e
   #4 [88023fa87f00] default_do_nmi at 815f3b19
   #5 [88023fa87f30] do_nmi at 815f3ed0
   #6 [88023fa87f50] nmi at 815f3950
  [exception RIP: intel_idle+157]
  RIP:

[Kernel-packages] [Bug 896922] Re: Lenovo L520 - psmouse.c: touchpad at isa0060/serio4/input0 lost sync and stops working for seconds

2013-09-07 Thread Christopher M. Penalver 
Mathias Dietrich, would you please test for this in Saucy? If
reproducible, could you please test the latest mainline kernel via
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.11-saucy/ ?

** Tags removed: kernel-bug-exists-upstream
** Tags added: needs-upstream-testing

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/896922

Title:
  Lenovo L520 - psmouse.c: touchpad at isa0060/serio4/input0 lost sync
  and stops working for seconds

Status in The Linux Kernel:
  Confirmed
Status in “linux” package in Ubuntu:
  Incomplete
Status in “xserver-xorg-input-synaptics” package in Ubuntu:
  Confirmed
Status in “xserver-xorg-input-synaptics” package in Fedora:
  Unknown

Bug description:
  There are a lot of open bug-reports concerning this defect, but due to
  the most popular report was closed by developers, with the demand to
  open a new report if this persists, I open a new bug-report.

  When using the touchpad, it's often not working and stucks for seconds, in 
short, it is unusesable.
  This bug still happens in Ubuntu 11.10 on a Lenovo L520 with 
3.0.0-13-generic. Its a Synaptics touchpad, maybe it's kernel bug.

  Dmesg produces the following output:

  [14861.416567] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [14861.417899] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [14861.419232] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [14861.420563] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [14861.424233] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [14861.424240] psmouse.c: issuing reconnect request
  [17240.238861] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
4
  [17240.240191] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [17240.258248] psmouse.c: TouchPad at isa0060/serio4/input0 - driver 
resynched.
  [17695.950963] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [17695.955414] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [17695.956743] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [17695.960402] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [17695.961736] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 
1
  [17695.961740] psmouse.c: issuing reconnect request

  Whoever is willing to fix this bug can earn a lot of Karma for closing
  all the duplicates, so please fix this, it's happening since Maverick.

  Of course I'll will help you getting this fixed with any information
  you need.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: linux-image-3.0.0-13-generic 3.0.0-13.22
  ProcVersionSignature: Ubuntu 3.0.0-13.22-generic 3.0.6
  Uname: Linux 3.0.0-13-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mathias   15841 F pulseaudio
  CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xf090 irq 43'
     Mixer name : 'Intel CougarPoint HDMI'
     Components : 'HDA:10ec0269,17aa21de,00100100 
HDA:80862805,80860101,0010'
     Controls  : 24
     Simple ctrls  : 11
  Card29.Amixer.info:
   Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 
8GHT26WW-1.08'
     Mixer name : 'ThinkPad EC 8GHT26WW-1.08'
     Components : ''
     Controls  : 1
     Simple ctrls  : 1
  Card29.Amixer.values:
   Simple mixer control 'Console',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]
  Date: Sun Nov 27 17:58:09 2011
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012)
  MachineType: LENOVO 785954G
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic 
root=UUID=cf5078bd-6bdb-4d1b-a1bb-92d20c5ac60d ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.0.0-13-generic N/A
   linux-backports-modules-3.0.0-13-generic  N/A
   linux-firmware1.60
  SourcePackage: linux
  StagingDrivers: rts_pstor mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/06/2011
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 8GET37WW (1.14 )
  dmi.board.name: 785954G
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO

[Kernel-packages] [Bug 1063474] Re: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset.

2013-09-07 Thread Christopher M. Penalver 
\|Bruce L, what maintainer mailing list did you post to specifically?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1063474

Title:
  System fails to connect to iHOS-104 DVD drive with nvidia MCP61
  chipset.

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  The computer fails to connect to the LG iHOS-104 DVD drive.
  The drive is working, as it will boot the Windows installer.

  I have seen similar bugs posted on the internet for the past 5 years.
  Here's a thread that shows the problem fixed for the MCP55 chipset.

  http://www.gossamer-
  threads.com/lists/linux/kernel/1234502?do=post_view_threaded#1234502

  WORKAROUND: Use the DVD drive with a USB-SATA adapter.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: linux-image-3.5.0-17-generic 3.5.0-17.27
  ProcVersionSignature: Ubuntu 3.5.0-17.27-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  watchtv7366 F pulseaudio
   /dev/snd/controlC0:  watchtv4814 F alsamixer
    watchtv7366 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory: 'iw'
  Date: Sun Oct  7 19:34:10 2012
  HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 006: ID 046d:c047 Logitech, Inc. Laser Mouse
   Bus 002 Device 005: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard 
Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Gigabyte Technology Co., Ltd. M68M-S2P
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic 
root=UUID=81823799-2b15-4236-887b-e3497f3f6a46 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.94
  RfKill:

  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:

  dmi.bios.date: 07/15/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: FCb
  dmi.board.name: M68M-S2P
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrFCb:bd07/15/2010:svnGigabyteTechnologyCo.,Ltd.:pnM68M-S2P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM68M-S2P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: M68M-S2P
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  ---
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  watchtv1305 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  CurrentDmesg:
   [   55.165828] pool[1480]: segfault at 40 ip 7f3d05544f87 sp 
7f3d03653c50 error 4 in tumbler-gst-thumbnailer.so[7f3d05542000+4000]
   [  707.285402] python[6778]: segfault at 0 ip 7eff23bde2f7 sp 
7fffeba941f8 error 4 in libgtk-3.so.0.800.2[7eff23ade000+4c5000]
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard 
Controller
   Bus 002 Device 002: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Gigabyte Technology Co., Ltd. M68M-S2P
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.10.0-6-generic 
root=UUID=e276cadb-f115-40c5-abe4-2471badc3113 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3
  RelatedPackageVersions:
   linux-restricted-modules-3.10.0-6-generic N/A
   linux-backports-modules-3.10.0-6-generic  N/A
   linux-firmware1.113
  RfKill:

  Tags:  saucy
  Uname: Linux 3.10.0-6-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 08/25/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: FC
  dmi.board.name: M68M-S2P
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias:

[Kernel-packages] [Bug 1201674] Re: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl]

2013-09-07 Thread Christopher M. Penalver 
Ken:
Did not see any hash matches in dmesg.txt

Still need to attach it with v3.11 kernel so others may analyze it.

** Tags added: needs-upstream-testing

** Tags removed: kernel-bug-exists-upstream-v3.11-rc1
** Tags added: kernel-bug-exists-upstream-v3.11

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1201674

Title:
  [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl]

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  suspend resume failure again

  ProblemType: KernelOops
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.10.0-2-generic 3.10.0-2.11
  ProcVersionSignature: Ubuntu 3.10.0-2.11-generic 3.10.0
  Uname: Linux 3.10.0-2-generic x86_64
  NonfreeKernelModules: wl
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.10.2-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  kenn   1675 F pulseaudio
  Date: Mon Jul 15 23:48:08 2013
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=f60e696f-fe9d-4216-86ec-ce13930c9c34
  InstallationDate: Installed on 2013-07-10 (5 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130709)
  InterpreterPath: /usr/bin/python3.3
  MachineType: Hewlett-Packard 520-1138cb
  MarkForUpload: True
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.10.0-2-generic 
root=UUID=ee63e052-abe5-4316-8499-10528ed15dd7 ro recovery nomodeset 
rootflags=subvol=@
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon 
not responding.
  RelatedPackageVersions:
   linux-restricted-modules-3.10.0-2-generic N/A
   linux-backports-modules-3.10.0-2-generic  N/A
   linux-firmware1.112
  SourcePackage: linux
  Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl]
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: AMI
  dmi.bios.version: 7.09
  dmi.board.asset.tag: 3CR22302J0
  dmi.board.name: 2ADC
  dmi.board.vendor: PEGATRON CORPORATION
  dmi.board.version: 1.05
  dmi.chassis.asset.tag: 3CR22302J0
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnAMI:bvr7.09:bd11/23/2012:svnHewlett-Packard:pn520-1138cb:pvr1.00:rvnPEGATRONCORPORATION:rn2ADC:rvr1.05:cvnHewlett-Packard:ct3:cvr:
  dmi.product.name: 520-1138cb
  dmi.product.version: 1.00
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201674/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems

2013-09-07 Thread Christopher M. Penalver 
Bogdan Iavorskyi, if you have a bug in Ubuntu, the Ubuntu Kernel team, Ubuntu 
Bug Control team, and Ubuntu Bug Squad would like you to please file a new 
report by executing the following in a terminal while booted into a Ubuntu 
repository kernel (not a mainline one) via:
ubuntu-bug linux

For more on this, please read the official Ubuntu documentation:
Ubuntu Bug Control and Ubuntu Bug Squad: 
https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue
Ubuntu Kernel Team: 
https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies#Filing_Kernel_Bug_reports
Ubuntu Community: 
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette

When opening up the new report, please feel free to subscribe me to it.

Please note, not filing a new report would delay your problem being
addressed as quickly as possible.

No need exists to comment here at this time. After reading the above
documentation in it's entirety, if you have further questions, you are
welcome to redirect them to the appropriate mailing list or forum via
http://www.ubuntu.com/support/community/mailinglists , or you may
contact me directly.

Thank you for your understanding.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1208257

Title:
  [HP ProBook 4540s] brightness control problems

Status in “linux” package in Ubuntu:
  Incomplete
Status in “linux” package in Baltix:
  Triaged

Bug description:
  I bought a laptop in December 2012, immediately tried to put Ubuntu
  12.10, got broken wi-fi and non-working graphics acceleration. Updated
  kernel to version 3.6, with graphic acceleration was all right, even
  partially earned wi-fi. After some time wi-fi hang, helped only
  restart the network subsystem.

  Updated kernel to 3.7, with the wi-fi was all became normal, but
  stopped working brightness control with the Fn keys. Progress bar
  indicates that the brightness changes, but in fact nothing happens.

  Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing
  changes. Upon adjustment has broken in 3.7 kernel. It turns out that
  this is a regression.

  WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor.

  ---
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA:
   country UA:
    (2402 - 2482 @ 40), (N/A, 20)
  DistroRelease: Ubuntu 13.04
  InstallationDate: Installed on 2013-08-04 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: Hewlett-Packard HP ProBook 4540s
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  raring
  Uname: Linux 3.8.0-19-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 05/20/2013
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68IRR Ver. F.41
  dmi.board.name: 17F6
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 58.1E
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP ProBook 4540s
  dmi.product.version: A1018C1100
  dmi.sys.vendor: Hewlett-Packard
  ---
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 3887 F pulseaudio
    ubuntu14062 F pulseaudio
  CRDA:
   country UA:
    (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR
    (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR
    (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130807)
  MachineType: Hewlett-Packard HP ProBook 4540s
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/username.seed boot=casper persistent 
initrd=/casper/initrd.lz splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3
  RelatedPackageVersions:
   linux-restricted-modules-3.10.0-6-generic N/A
   linux-backports-modules-3.10.0-6-generic  N/A
   linux-firmware

[Kernel-packages] [Bug 751453] Re: External monitor doesn't work on Toshiba Portege R600

2013-09-07 Thread Christopher M. Penalver 
Nine, if you have a bug in Ubuntu, the Ubuntu Kernel team, Ubuntu Bug Control 
team, and Ubuntu Bug Squad would like you to please file a new report by 
executing the following in a terminal while booted into a Ubuntu repository 
kernel (not a mainline one) via:
ubuntu-bug linux

For more on this, please read the official Ubuntu documentation:
Ubuntu Bug Control and Ubuntu Bug Squad: 
https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue
Ubuntu Kernel Team: 
https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies#Filing_Kernel_Bug_reports
Ubuntu Community: 
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette

When opening up the new report, please feel free to subscribe me to it.

Please note, not filing a new report would delay your problem being
addressed as quickly as possible.

No need exists to comment here at this time. After reading the above
documentation in it's entirety, if you have further questions, you are
welcome to redirect them to the appropriate mailing list or forum via
http://www.ubuntu.com/support/community/mailinglists , or you may
contact me directly.

Thank you for your understanding.

** Attachment removed: apport-bug --save 751452_linux.apport on ubuntu 13.10 
image
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/751453/+attachment/3807383/+files/751453_linux.apport

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/751453

Title:
  External monitor doesn't work on Toshiba Portege R600

Status in The Linux Kernel:
  Incomplete
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  In summary, when an external monitor is not connected at boot, I can't
  get the laptop to drive an external monitor. This is a problem in
  Ubuntu Lucid (10.04) but it was not a problem in the Ubuntu Hardy
  (8.04).

  This appears to be a problem with the mainline kernel. I have
  submitted a report at:
  https://bugzilla.kernel.org/show_bug.cgi?id=31292

  WORKAROUND: In the BIOS change Power on Display from auto-selected
  to LCD+Analog RGB.

  External monitor not connected at boot
  --

  * External monitor can be seen in Monitor preferences, but laptop
    does not drive external monitor

  $ xrandr -q
  Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
  VGA1 connected (normal left inverted right x axis y axis)
     1360x768   59.8
     1024x768   60.0
     800x60060.3 56.2
     848x48060.0
     640x48059.9 59.9
  LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1280x800   60.2*+
     1024x768   85.0 75.0 70.1 60.0
     832x62474.6
     800x60085.1 72.2 75.0 60.3 56.2
     640x48085.0 72.8 75.0 59.9
     720x40085.0
     640x40085.1
     640x35085.1
  DVI1 disconnected (normal left inverted right x axis y axis)

  * Mirror screens in Monitor preferences appears to switch
    resolution, but the external monitor is not driven. In this case
    xrandr reports:

  $ xrandr -q
  Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
  VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1360x768   59.8
     1024x768   60.0*
     800x60060.3 56.2
     848x48060.0
     640x48059.9 59.9
  LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1280x800   60.2 +
     1024x768   85.0 75.0 70.1 60.0*
     832x62474.6
     800x60085.1 72.2 75.0 60.3 56.2
     640x48085.0 72.8 75.0 59.9
     720x40085.0
     640x40085.1
     640x35085.1
  DVI1 disconnected (normal left inverted right x axis y axis)

  * I can't use toshset to connect external monitor:

  $ sudo toshset -video both

  This makes the screen go blank and the  external monitor is not
  driven. I can recover switching to VT1 and typing sudo toshset -video int.

  * Changning the output using the proc file system does not appear to
    work as it should (See http://memebeam.org/toys/ToshibaAcpiDriver
    and http://memebeam.org/toys/ToshibaAcpiVideo) :

  # cat /proc/acpi/toshiba/video
  lcd_out: 1
  crt_out: 0
  tv_out:  0
  # echo crt_out:1  /proc/acpi/toshiba/video
  # cat /proc/acpi/toshiba/video
  lcd_out: 1
  crt_out: 0
  tv_out:  0

  Workaround: External monitor connected at boot
  --

  The external screen is driven automatically. The resolution of the
  laptop screen is adjusted to match the external monitor.

  It's not possible to turn off the monitor using the proc filesystem:

  # cat

[Kernel-packages] [Bug 1219102] Re: Cannot update or install Ubuntu 13.10

2013-09-07 Thread Christopher M. Penalver 
Richard Vajdel, well booting other linux distros and getting the same
problem correlates to a hardware problem, but still possible it's a
linux issue. Would you have a Windows partition you could gut check a HW
problem against?

** Changed in: linux (Ubuntu)
   Status: Invalid = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1219102

Title:
  Cannot update or install Ubuntu 13.10

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  In early stages of development of Saucy salamander i haven't any problems 
with installing 13.10. I was using it for a while  and was waiting for xmir or 
its parts to come in to daily. Later i tried to update saucy salamander, but 
after a while my display went black ( like turned off) and pc went silent, but 
still going. I was like  daily, maybe mistake or something, it will be patched 
soon or later. Today( after 3 weeks, or month)  I made LiveUSB with daily 
build of Saucy and tried to did a clear installation. While installing ( like 
1-2 minutes of progress) it did the same thing as during the earlier update. Pc 
just went silent and display was black. My grub was out. Iam not sure if I am 
able to obtain some info from that because it was during installation and that 
testing partition doesn't look well. Even when Ubuntu 13.10 is booted in  try 
without installing mode, ubuntu runs just like for 3 minutes.
  ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 
k3.8.0-29-generic.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ubuntu 3320 F pulseaudio
   /dev/snd/controlC0:  ubuntu 3320 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'NVidia'/'HDA NVidia at 0xfa00 irq 23'
     Mixer name : 'Realtek ALC883'
     Components : 'HDA:10ec0883,1458e601,0012'
     Controls  : 57
     Simple ctrls  : 22
  Card1.Amixer.info:
   Card hw:1 'HDMI'/'HDA ATI HDMI at 0xf901 irq 43'
     Mixer name : 'ATI R6xx HDMI'
     Components : 'HDA:1002aa01,00aa0100,0010'
     Controls  : 7
     Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'IEC958',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]
  CasperVersion: 1.315.1
  DistroRelease: Ubuntu 12.04
  IwConfig:
   lono wireless extensions.

   eth0  no wireless extensions.
  LiveMediaBuild: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
  Lsusb:
   Bus 001 Device 002: ID 0951:1643 Kingston Technology DataTraveler G3 4GB
   Bus 002 Device 002: ID 15d9:0a4d Trust International B.V.
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Gigabyte Technology Co., Ltd. M52L-S3
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed 
boot=casper  quiet splash -- BOOT_IMAGE=/casper/vmlinuz
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-29-generic N/A
   linux-backports-modules-3.8.0-29-generic  N/A
   linux-firmware1.79.6
  RfKill:

  Tags:  precise running-unity
  Uname: Linux 3.8.0-29-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 03/20/2008
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F6
  dmi.board.name: M52L-S3
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF6:bd03/20/2008:svnGigabyteTechnologyCo.,Ltd.:pnM52L-S3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM52L-S3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: M52L-S3
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1219102/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1188965] Re: [hp mini 210-1000] touchpad jump when try to select element

2013-09-07 Thread Christopher M. Penalver 
Stefano Statuti, for regression testing purposes, could you please test
for this in Lucid via http://old-releases.ubuntu.com/releases/lucid/ ?

If reproducible, you can just make one comment, no need to apport-
collect further.

** Description changed:

  hi,
  
  i have this problem from 12.04 to 13.04
  
  i can reproduce all the problems :
  1) if i click on left button and try to select (using 2 different fingers) 
some element (like word in a website) the icon of mouse have a strange 
comportament, jump.
  mouse is this http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf page n° 14
  if i try to put my finger into touchpad on Left touchpad button (or Right 
touchpad button) and try to scroll my finger over the button the mouse's 
pointer moves, instead it should not!
  
  2) in this mouse there are a led (TouchPad on/off button) but NOT work. From 
manual I have this description : Turns the TouchPad
  on and off. Quickly double-tap the button to turn the TouchPad on and off.
  ---
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  annalisa   1590 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=616dbb5b-0c98-4061-923a-1b8b51677c41
  InstallationDate: Installed on 2013-06-09 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=60da3218-49dd-4ec3-af43-8223dc6661c7 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-19-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
  
  dmi.bios.date: 12/04/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.02
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 48.10
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.02:bd12/04/2009:svnHewlett-Packard:pnHPMini210-1000:pvr04A3102021030:rvnHewlett-Packard:rn3660:rvr48.10:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Mini 210-1000
  dmi.product.version: 04A3102021030
  dmi.sys.vendor: Hewlett-Packard
- --- 
+ ---
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
-   ubuntu 4627 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  ubuntu 2668 F pulseaudio
+   ubuntu 4627 F pulseaudio
  CasperVersion: 1.336
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130827)
  MachineType: Hewlett-Packard HP Mini 210-1000
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
-  LANGUAGE=en_US
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
+  LANGUAGE=en_US
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true 
file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  PulseList:
-  Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
-  No PulseAudio daemon running, or not running as session daemon.
+  Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
+  No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
-  linux-restricted-modules-3.11.0-4-generic N/A
-  linux-backports-modules-3.11.0-4-generic  N/A
-  linux-firmware1.113
+  linux-restricted-modules-3.11.0-4-generic N/A
+  linux-backports-modules-3.11.0-4-generic  N/A
+  linux-firmware1.113
  Tags:  saucy
  Uname: Linux 3.11.0-4-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
-  
+ 
  dmi.bios.date: 03/18/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.24
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3660
  dmi.board.vendor: Hewlett-Packard

[Kernel-packages] [Bug 1129511] Re: Unable to boot system unless acpi=off quiet splash deleted from grub

2013-09-07 Thread Christopher M. Penalver 
Lou Hurst, could you please provide the output of the following terminal 
command:
sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1129511

Title:
  Unable to boot system unless acpi=off  quiet splash deleted from
  grub

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70
  -0NC-494US Am not running as a dual boot install. I unable to boot
  this system unless acpi=off and quiet splash is deleted from grub. I
  am running this as the only OS, NOT a dual boot. I am able to boot,
  install and run 12.04 Precise 64 bit on this system, BIOS in legacy
  mode for install and running from HDD. Following steps in Debugging
  ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have
  updated to the latest BIOS on the box.

  WORKAROUND: Use legacy boot mode.

  WORKAROUND: With 12.10 installed to HDD tried booting with all options
  given in the Wiki and with acpi=off and quiet splash deleted, system
  boots ok and into usable environment.

  With acpi=noirq and quiet splash deleted system starts to boot and stops 
with the following as last line:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With pnpacpi=off and quiet splash deleted system starts to boot and stops 
with the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With noapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With nolapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  In the troubleshooting steps I was unable to suspend or hibernate the
  system so am unable to supply a /var/log/kern.log.0 file.

  I am unable to include a tarball of /proc/acpi directory as that
  directory doesn't exist.

  ---
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lou1920 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Micro-Star International Co., Ltd. GT70
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic 
root=/dev/mapper/ubuntu-root ro acpi=off
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts_pstor
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-17-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1762IMS.50U
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1762
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A:
  dmi.product.name: GT70
  dmi.product.version: REV:1.0
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1195811] Re: nouveau: Abnormally high FPS and tearing (no vsync) with nouveau

2013-09-07 Thread Piotr Stefanczyk 
I have the same problem in my system (Ubuntu 13.10 daily 9-7-2013), but
only in Xmir (in glxgears approx. 300 fps). Almost all native demos work
perfectly except eglplasma demo (approx. 300 fps).

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1195811

Title:
  nouveau: Abnormally high FPS and tearing (no vsync) with nouveau

Status in Mir:
  Triaged
Status in “linux” package in Ubuntu:
  In Progress

Bug description:
  I installed Ubuntu 13.10 (yesterday)  in order to test Xmir and Mir natively 
(examples-clients). Xmirg worked flawlessly. The only problem was the 
duplicate mouse cursor(s).
  But I noticed an abnormally high FPS in some clients demo when I tested Mir 
natively per these instructions
  http://unity.ubuntu.com/mir/using_mir_on_pc.html

  I recorded the test case using external camera.  Apologies for the quality 
but you will see the values.
  http://www.youtube.com/watch?v=zil-lRNlaks

  I attached an apport.log just for more info if are needed.

  I'm not a technical guy and I filled this report prompted by @duflu in IRC 
#ubuntu-mir
  You can read the mini conversation here.
  http://irclogs.ubuntu.com/2013/06/28/%23ubuntu-mir.html

  This test had the same results either if X only was running in VT7 (Video)  
or Xmir.
  I hope I helped... in something.

  Regards
   NikTh

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1195811/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222112] Re: coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

2013-09-07 Thread Christopher M. Penalver 
Chascon, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags removed: apple macbook pro
** Tags added: needs-bisect needs-upstream-testing regression-release

** Tags added: latest-bios-mbp11.88z.0055.b08.0610121325

** Attachment removed: version.log
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+attachment/3807318/+files/version.log

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both 
fans running full shortly after bootup (regression). I justified it thinking 
that Ubuntu had higher requirements, until infrequent failed attempts to boot 
finally resulted in the on-screen posting of coretemp: Errata AE18 not fixed, 
update BIOS or microcode of the CPU! on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of 
the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp   13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with # are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments  observations
  I do know Errata is code for defective firmware and that this has been dealt 
with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and 
that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing  Intel's microcode update, which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, put the following into /etc/rc.local disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not loaded 
before the coretemp module jumps into action.
  --- 
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3726 F pulseaudio
   /dev/snd/controlC0:  mo 3554 F volumeicon
mo 3726 F pulseaudio
  DistroRelease: Ubuntu 13.10
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic

[Kernel-packages] [Bug 1222070] Re: Kernel Panic --not syncing fatal exception in interrupt

2013-09-07 Thread Christopher M. Penalver 
** Description changed:

  Using the infrared remote control results in a kernel panic. This is
  reproducible using mplayer.
  
- 1) lsb_release -rd
- Description:  Ubuntu Saucy Salamander (development branch)
- Release:  13.10
- 2) apt-cache policy linux
- linux:
-   Installed: (none)
-   Candidate: 3.11.0.4.5
-   Version table:
-  3.11.0.4.5 0
- 500 http://ca.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages
- 
- uname -r
- 3.11.0-4-generic
- 
  apt-cache policy mplayer
  mplayer:
-   Installed: (none)
-   Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
-   Version table:
-  2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
- 500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
-  2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
- 100 /var/lib/dpkg/status
+   Installed: (none)
+   Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
+   Version table:
+  2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
+ 500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
+  2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
+ 100 /var/lib/dpkg/status
  
- 3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.  
+ 3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.
  4) Audio loops like a scratched record, computer hard locks so that the 
keyboard becomes entirely unresponsive: no escaping to a tty, keyboard capslock 
doesn't light up, screen goes to tty1 and outputs Kernel Panic --not syncing 
fatal exception in interrupt, and SysRq-cntrl-alt-r does not reboot the 
computer.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic i686
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC1:  mo 3994 F pulseaudio
-  /dev/snd/controlC0:  mo 3525 F volumeicon
-   mo 3994 F pulseaudio
-  /dev/snd/pcmC0D0c:   mo 3994 F...m pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC1:  mo 3994 F pulseaudio
+  /dev/snd/controlC0:  mo 3525 F volumeicon
+   mo 3994 F pulseaudio
+  /dev/snd/pcmC0D0c:   mo 3994 F...m pulseaudio
  Date: Sat Sep  7 02:35:53 2013
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  RelatedPackageVersions:
-  linux-restricted-modules-3.11.0-4-generic N/A
-  linux-backports-modules-3.11.0-4-generic  N/A
-  linux-firmware1.113
+  linux-restricted-modules-3.11.0-4-generic N/A
+  linux-backports-modules-3.11.0-4-generic  N/A
+  linux-firmware1.113
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (5 days ago)
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

** Tags added: latest-bios-mbp11 needs-crash-log needs-upstream-testing
regression-potential

** Attachment removed: lspci-vnvn.log
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222070/+attachment/3807085/+files/lspci-vnvn.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222070

Title:
  Kernel Panic --not syncing fatal exception in interrupt

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Using the infrared remote control results in a kernel panic. This is
  reproducible using mplayer.

  apt-cache policy mplayer
  mplayer:
    Installed: (none)
    Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
    Version table:
   2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
   2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
  100 /var/lib/dpkg/status

  3) I

[Kernel-packages] [Bug 1222187] [NEW] blocked

2013-09-07 Thread babis x 
Public bug reported:

I opened with firefox the page epanastasi-gr.blogspot.comhaving on hold the 
application finder with the ubuntu-bug linux ,commande because otherwise when 
i am blocked i am not able to open not even the application finder,so when i 
try to enter epanastasi-gr.blogspot.com,once more i got blocked and nothing 
was function exept the ubuntu-bug linux commande i had on hold on top of my 
screen.Very slowly started the collection of the information for the apport and 
when i was able to press send on the collected information this scrip 
appearedScript: http://s.ytimg.com/yts/jsbin/www-embed-player-vflwWlnaY.js:4 
,with few efforts i managed to press stop on this script and now i can 
continue my reading until another script blocks me again.So i got another 
Application finder on hold to just try the same method to unblock.I do not 
feel very good that i have to buther you all the time with my repports but so 
far i have no other solution to this blocking problem.At least before the 
scripts used to appear on my screen and i was managing to stop them ,but these 
days now the any script appears after i press the send to the repport,so i keep 
on buther you all these times.
I hope to have your understanding to all these problems i face ,THANK YOU A LOT

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-30-generic 3.8.0-30.44
ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
Uname: Linux 3.8.0-30-generic i686
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: i386
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  babis  1864 F pulseaudio
  babis  1989 F panel-16-mixer
 /dev/snd/controlC1:  babis  1864 F pulseaudio
  babis  1989 F panel-16-mixer
CRDA:
 country AM:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (N/A, 18)
(5250 - 5330 @ 20), (N/A, 18), DFS
Date: Sat Sep  7 18:19:37 2013
HibernationDevice: RESUME=UUID=7cca9bde-be93-4f75-9826-c340be894633
InstallationDate: Installed on 2013-07-30 (38 days ago)
InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
Lsusb:
 Bus 002 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical 
Mouse
 Bus 003 Device 002: ID 046d:0a10 Logitech, Inc. 
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: FUJITSU SIEMENS AMILO Li 1718
MarkForUpload: True
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic 
root=UUID=f3eaa24a-6208-44b5-a077-66ee1da1e3d9 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not 
responding.
RelatedPackageVersions:
 linux-restricted-modules-3.8.0-30-generic N/A
 linux-backports-modules-3.8.0-30-generic  N/A
 linux-firmware1.106
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 06/25/07
dmi.bios.vendor: Phoenix
dmi.bios.version: V1.8
dmi.board.name: AMILO Li 1718
dmi.board.vendor: FUJITSU SIEMENS
dmi.board.version: Rev.A
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 1
dmi.chassis.vendor: ATI
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnPhoenix:bvrV1.8:bd06/25/07:svnFUJITSUSIEMENS:pnAMILOLi1718:pvr-1:rvnFUJITSUSIEMENS:rnAMILOLi1718:rvrRev.A:cvnATI:ct1:cvrN/A:
dmi.product.name: AMILO Li 1718
dmi.product.version: -1
dmi.sys.vendor: FUJITSU SIEMENS

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 raring

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222187

Title:
  blocked

Status in “linux” package in Ubuntu:
  New

Bug description:
  I opened with firefox the page epanastasi-gr.blogspot.comhaving on hold the 
application finder with the ubuntu-bug linux ,commande because otherwise when 
i am blocked i am not able to open not even the application finder,so when i 
try to enter epanastasi-gr.blogspot.com,once more i got blocked and nothing 
was function exept the ubuntu-bug linux commande i had on hold on top of my 
screen.Very slowly started the collection of the information for the apport and 
when i was able to press send on the collected information this scrip 
appearedScript: http://s.ytimg.com/yts/jsbin/www-embed-player-vflwWlnaY.js:4 
,with few efforts i managed to press stop on this script and now i can 
continue my reading until another script blocks me again.So i got another 
Application finder on hold to just try the same method to unblock.I do not 
feel very good that i have to buther you all the time with my repports but so 
far i have no other solution to this blocking problem.At least before the 
scripts used to appear on my screen and i was managing to stop them

[Kernel-packages] [Bug 1222187] Status changed to Confirmed

2013-09-07 Thread Brad Figg 
This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222187

Title:
  blocked

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  I opened with firefox the page epanastasi-gr.blogspot.comhaving on hold the 
application finder with the ubuntu-bug linux ,commande because otherwise when 
i am blocked i am not able to open not even the application finder,so when i 
try to enter epanastasi-gr.blogspot.com,once more i got blocked and nothing 
was function exept the ubuntu-bug linux commande i had on hold on top of my 
screen.Very slowly started the collection of the information for the apport and 
when i was able to press send on the collected information this scrip 
appearedScript: http://s.ytimg.com/yts/jsbin/www-embed-player-vflwWlnaY.js:4 
,with few efforts i managed to press stop on this script and now i can 
continue my reading until another script blocks me again.So i got another 
Application finder on hold to just try the same method to unblock.I do not 
feel very good that i have to buther you all the time with my repports but so 
far i have no other solution to this blocking problem.At least before the 
scripts used to appear on my screen and i was managing to stop them ,but these 
days now the any script appears after i press the send to the repport,so i keep 
on buther you all these times.
  I hope to have your understanding to all these problems i face ,THANK YOU A 
LOT

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-30-generic 3.8.0-30.44
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic i686
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  babis  1864 F pulseaudio
babis  1989 F panel-16-mixer
   /dev/snd/controlC1:  babis  1864 F pulseaudio
babis  1989 F panel-16-mixer
  CRDA:
   country AM:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (N/A, 18)
(5250 - 5330 @ 20), (N/A, 18), DFS
  Date: Sat Sep  7 18:19:37 2013
  HibernationDevice: RESUME=UUID=7cca9bde-be93-4f75-9826-c340be894633
  InstallationDate: Installed on 2013-07-30 (38 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424)
  Lsusb:
   Bus 002 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical 
Mouse
   Bus 003 Device 002: ID 046d:0a10 Logitech, Inc. 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: FUJITSU SIEMENS AMILO Li 1718
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic 
root=UUID=f3eaa24a-6208-44b5-a077-66ee1da1e3d9 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon 
not responding.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-30-generic N/A
   linux-backports-modules-3.8.0-30-generic  N/A
   linux-firmware1.106
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/25/07
  dmi.bios.vendor: Phoenix
  dmi.bios.version: V1.8
  dmi.board.name: AMILO Li 1718
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: Rev.A
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 1
  dmi.chassis.vendor: ATI
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenix:bvrV1.8:bd06/25/07:svnFUJITSUSIEMENS:pnAMILOLi1718:pvr-1:rvnFUJITSUSIEMENS:rnAMILOLi1718:rvrRev.A:cvnATI:ct1:cvrN/A:
  dmi.product.name: AMILO Li 1718
  dmi.product.version: -1
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222187/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222070] Re: Kernel Panic --not syncing fatal exception in interrupt

2013-09-07 Thread Christopher M. Penalver 
Chascon, could you please capture the crash following
https://help.ubuntu.com/community/DebuggingSystemCrash ?

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222070

Title:
  Kernel Panic --not syncing fatal exception in interrupt

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Using the infrared remote control results in a kernel panic. This is
  reproducible using mplayer.

  apt-cache policy mplayer
  mplayer:
    Installed: (none)
    Candidate: 2:1.0~rc4.dfsg1+svn34540-1ubuntu4
    Version table:
   2:1.0~rc4.dfsg1+svn34540-1ubuntu4 0
  500 http://ca.archive.ubuntu.com/ubuntu/ saucy/universe i386 Packages
   2:1.0~rc4.dfsg1+svn34540-1ubuntu2 0
  100 /var/lib/dpkg/status

  3) I expect to use the infrared remote successfully, without resulting in a 
kernel panic.
  4) Audio loops like a scratched record, computer hard locks so that the 
keyboard becomes entirely unresponsive: no escaping to a tty, keyboard capslock 
doesn't light up, screen goes to tty1 and outputs Kernel Panic --not syncing 
fatal exception in interrupt, and SysRq-cntrl-alt-r does not reboot the 
computer.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-4-generic 3.11.0-4.9
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic i686
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mo 3994 F pulseaudio
   /dev/snd/controlC0:  mo 3525 F volumeicon
    mo 3994 F pulseaudio
   /dev/snd/pcmC0D0c:   mo 3994 F...m pulseaudio
  Date: Sat Sep  7 02:35:53 2013
  HibernationDevice: RESUME=UUID=971dcaf3-f640-4d1c-9cb6-ea8eba0cab54
  InstallationDate: Installed on 2011-09-05 (733 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: Apple Computer, Inc. MacBookPro1,1
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=9c44e3b1-d6d1-4ca7-a621-c0142ded125a ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-4-generic N/A
   linux-backports-modules-3.11.0-4-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (5 days ago)
  dmi.bios.date: 10/12/06
  dmi.bios.vendor: Apple Computer, Inc.
  dmi.bios.version: MBP11.88Z.0055.B08.0610121325
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F425BEC8
  dmi.board.vendor: Apple Computer, Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 8
  dmi.chassis.vendor: Apple Computer, Inc.
  dmi.chassis.version: Mac-F425BEC8
  dmi.modalias: 
dmi:bvnAppleComputer,Inc.:bvrMBP11.88Z.0055.B08.0610121325:bd10/12/06:svnAppleComputer,Inc.:pnMacBookPro1,1:pvr1.0:rvnAppleComputer,Inc.:rnMac-F425BEC8:rvrPVT:cvnAppleComputer,Inc.:ct8:cvrMac-F425BEC8:
  dmi.product.name: MacBookPro1,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Computer, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222070/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1129511] Re: Unable to boot system unless acpi=off quiet splash deleted from grub

2013-09-07 Thread Christopher M. Penalver 
** Tags removed: bios-outdated-50x
** Tags added: latest-bios-50x

** Tags added: saucy

** Tags removed: kernel-fixed-upstream
** Tags added: kernel-bug-exists-upstream-v3.8 needs-upstream-testing

** Summary changed:

- Unable to boot system unless acpi=off  quiet splash deleted from grub
+ Unable to boot system in EFI unless acpi=off  quiet splash deleted from 
grub

** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1129511

Title:
  Unable to boot system in EFI unless acpi=off  quiet splash deleted
  from grub

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70
  -0NC-494US Am not running as a dual boot install. I unable to boot
  this system unless acpi=off and quiet splash is deleted from grub. I
  am running this as the only OS, NOT a dual boot. I am able to boot,
  install and run 12.04 Precise 64 bit on this system, BIOS in legacy
  mode for install and running from HDD. Following steps in Debugging
  ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have
  updated to the latest BIOS on the box.

  WORKAROUND: Use legacy boot mode.

  WORKAROUND: With 12.10 installed to HDD tried booting with all options
  given in the Wiki and with acpi=off and quiet splash deleted, system
  boots ok and into usable environment.

  With acpi=noirq and quiet splash deleted system starts to boot and stops 
with the following as last line:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With pnpacpi=off and quiet splash deleted system starts to boot and stops 
with the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With noapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With nolapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  In the troubleshooting steps I was unable to suspend or hibernate the
  system so am unable to supply a /var/log/kern.log.0 file.

  I am unable to include a tarball of /proc/acpi directory as that
  directory doesn't exist.

  ---
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lou1920 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Micro-Star International Co., Ltd. GT70
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic 
root=/dev/mapper/ubuntu-root ro acpi=off
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts_pstor
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-17-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1762IMS.50U
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1762
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A:
  dmi.product.name: GT70
  dmi.product.version: REV:1.0
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1189142] Re: Broken suspend for i915 with newer kernels

2013-09-07 Thread Christopher M. Penalver 
Aurelijus Rinkevicius, just to clarify, when you remove all the
requested kernel parameters, boot into the Ubuntu kernel, and use the
default firmware provided by Ubuntu, suspend works?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1189142

Title:
  Broken suspend for i915 with newer kernels

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I am running a Kubuntu 13.04 on a Sandybridge (Intel HD3000) + unused
  AMD HD 6630M. Suspend seems to be broken with newer kernels. The last
  working kernel seems to be ubuntu flavor of 3.8.0-23-generic. The
  newer kernels 3.8.0-24-generic+ and tested generic 3.9.4, 3.10rc4 seem
  to be broken.

  System does not come back up from a sleep. Gets a blank screen and a fan at 
max.
  --- 
  ApportVersion: 2.9.2-0ubuntu8.4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  odysei 2423 F pulseaudio
   /dev/snd/pcmC0D0p:   odysei 2423 F...m pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=8a51a66b-afc7-4aba-af08-adc76ae7bd7a
  InstallationDate: Installed on 2012-04-26 (495 days ago)
  InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120423)
  MachineType: Sony Corporation VPCSE190X
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic 
root=UUID=c62018f2-c2bb-4c89-9cba-41700f4452e0 ro pcie_aspm=force 
i915.i915_enable_rc6=1 radeon.dpm=1 quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-25.37-generic 3.8.13
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-25-generic N/A
   linux-backports-modules-3.8.0-25-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-25-generic x86_64
  UpgradeStatus: Upgraded to raring on 2013-04-27 (130 days ago)
  UserGroups: adm cdrom debian-tor dip lp lpadmin plugdev sambashare sudo
  dmi.bios.date: 06/15/2012
  dmi.bios.vendor: INSYDE
  dmi.bios.version: R2087H4
  dmi.board.asset.tag: N/A
  dmi.board.name: VAIO
  dmi.board.vendor: Sony Corporation
  dmi.board.version: N/A
  dmi.chassis.asset.tag: N/A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Sony Corporation
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnINSYDE:bvrR2087H4:bd06/15/2012:svnSonyCorporation:pnVPCSE190X:pvrC609YTLP:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A:
  dmi.product.name: VPCSE190X
  dmi.product.version: C609YTLP
  dmi.sys.vendor: Sony Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1189142/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1222197] [NEW] Dell XPS 13 screen always on lowest dim with 3.8.0-30 kernel

2013-09-07 Thread Sam VdE 
Public bug reported:

Since installing the latest kernel 3.8.0-30 on my Dell XPS 13, I can
only use the screen on lowest dim/brightness. Hardware keys as well as
System Settings have no effect on the dim level.

I already had issues with the brightness settings before. To make
hardware keys and System Settings brightness settings work I added

echo 0  /sys/class/backlight/intel_backlight/brightness

to /etc/rc.local and a custom /etc/pm/sleep.d/resume_brightness script.


Things tried
- remove echo 0  /sys/class/backlight/intel_backlight/brightness from 
previously mentioned scripts
- add grub boot options acpi_osi=Linux acpi_backlight=vendor 
acpi_osi='!Windows 2012'

Workaround:

- keep utilizing echo 0  /sys/class/backlight/intel_backlight/brightness in 
both scripts
- boot using the 3.8.0-29 kernel

This is a regression.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-signed-image-3.8.0-30-generic 3.8.0-30.44
ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5
Uname: Linux 3.8.0-29-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: amd64
Date: Sat Sep  7 18:09:08 2013
InstallationDate: Installed on 2013-03-28 (162 days ago)
InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130328)
MarkForUpload: True
SourcePackage: linux-signed
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-signed (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug raring

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-signed in Ubuntu.
https://bugs.launchpad.net/bugs/1222197

Title:
  Dell XPS 13 screen always on lowest dim with 3.8.0-30 kernel

Status in “linux-signed” package in Ubuntu:
  New

Bug description:
  Since installing the latest kernel 3.8.0-30 on my Dell XPS 13, I can
  only use the screen on lowest dim/brightness. Hardware keys as well as
  System Settings have no effect on the dim level.

  I already had issues with the brightness settings before. To make
  hardware keys and System Settings brightness settings work I added

  echo 0  /sys/class/backlight/intel_backlight/brightness

  to /etc/rc.local and a custom /etc/pm/sleep.d/resume_brightness
  script.

  
  Things tried
  - remove echo 0  /sys/class/backlight/intel_backlight/brightness from 
previously mentioned scripts
  - add grub boot options acpi_osi=Linux acpi_backlight=vendor 
acpi_osi='!Windows 2012'

  Workaround:

  - keep utilizing echo 0  /sys/class/backlight/intel_backlight/brightness 
in both scripts
  - boot using the 3.8.0-29 kernel

  This is a regression.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-signed-image-3.8.0-30-generic 3.8.0-30.44
  ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  Date: Sat Sep  7 18:09:08 2013
  InstallationDate: Installed on 2013-03-28 (162 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130328)
  MarkForUpload: True
  SourcePackage: linux-signed
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1222197/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1219102] Re: Cannot update or install Ubuntu 13.10

2013-09-07 Thread Richard Vajdel 
Okey, it's definitely hardware problem. I was staring at windows 7
booted screen for 8 minutes and it chrashed. Any idea what HW is
wrong?.. Motherboard..?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1219102

Title:
  Cannot update or install Ubuntu 13.10

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  In early stages of development of Saucy salamander i haven't any problems 
with installing 13.10. I was using it for a while  and was waiting for xmir or 
its parts to come in to daily. Later i tried to update saucy salamander, but 
after a while my display went black ( like turned off) and pc went silent, but 
still going. I was like  daily, maybe mistake or something, it will be patched 
soon or later. Today( after 3 weeks, or month)  I made LiveUSB with daily 
build of Saucy and tried to did a clear installation. While installing ( like 
1-2 minutes of progress) it did the same thing as during the earlier update. Pc 
just went silent and display was black. My grub was out. Iam not sure if I am 
able to obtain some info from that because it was during installation and that 
testing partition doesn't look well. Even when Ubuntu 13.10 is booted in  try 
without installing mode, ubuntu runs just like for 3 minutes.
  ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 
k3.8.0-29-generic.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ubuntu 3320 F pulseaudio
   /dev/snd/controlC0:  ubuntu 3320 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'NVidia'/'HDA NVidia at 0xfa00 irq 23'
     Mixer name : 'Realtek ALC883'
     Components : 'HDA:10ec0883,1458e601,0012'
     Controls  : 57
     Simple ctrls  : 22
  Card1.Amixer.info:
   Card hw:1 'HDMI'/'HDA ATI HDMI at 0xf901 irq 43'
     Mixer name : 'ATI R6xx HDMI'
     Components : 'HDA:1002aa01,00aa0100,0010'
     Controls  : 7
     Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'IEC958',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]
  CasperVersion: 1.315.1
  DistroRelease: Ubuntu 12.04
  IwConfig:
   lono wireless extensions.

   eth0  no wireless extensions.
  LiveMediaBuild: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
  Lsusb:
   Bus 001 Device 002: ID 0951:1643 Kingston Technology DataTraveler G3 4GB
   Bus 002 Device 002: ID 15d9:0a4d Trust International B.V.
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Gigabyte Technology Co., Ltd. M52L-S3
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed 
boot=casper  quiet splash -- BOOT_IMAGE=/casper/vmlinuz
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-29-generic N/A
   linux-backports-modules-3.8.0-29-generic  N/A
   linux-firmware1.79.6
  RfKill:

  Tags:  precise running-unity
  Uname: Linux 3.8.0-29-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 03/20/2008
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F6
  dmi.board.name: M52L-S3
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF6:bd03/20/2008:svnGigabyteTechnologyCo.,Ltd.:pnM52L-S3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM52L-S3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: M52L-S3
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1219102/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1129511] Re: Unable to boot system in EFI unless acpi=off quiet splash deleted from grub

2013-09-07 Thread Lou Hurst 
Just noticed in summary

+ Unable to boot system in EFI unless acpi=off  quiet splash
deleted

I am unable to boot the system even if acpi=off and quiet splash is
deleted from grub.

As soon as I hit F10 from the edit screen to continue with boot the
screen goes blank and all USB stick activity appears to stop.  Have let
it it sit up to 30 minutes in this state with no change.

Thanks

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1129511

Title:
  Unable to boot system in EFI unless acpi=off  quiet splash deleted
  from grub

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70
  -0NC-494US Am not running as a dual boot install. I unable to boot
  this system unless acpi=off and quiet splash is deleted from grub. I
  am running this as the only OS, NOT a dual boot. I am able to boot,
  install and run 12.04 Precise 64 bit on this system, BIOS in legacy
  mode for install and running from HDD. Following steps in Debugging
  ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have
  updated to the latest BIOS on the box.

  WORKAROUND: Use legacy boot mode.

  WORKAROUND: With 12.10 installed to HDD tried booting with all options
  given in the Wiki and with acpi=off and quiet splash deleted, system
  boots ok and into usable environment.

  With acpi=noirq and quiet splash deleted system starts to boot and stops 
with the following as last line:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With pnpacpi=off and quiet splash deleted system starts to boot and stops 
with the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With noapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With nolapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  In the troubleshooting steps I was unable to suspend or hibernate the
  system so am unable to supply a /var/log/kern.log.0 file.

  I am unable to include a tarball of /proc/acpi directory as that
  directory doesn't exist.

  ---
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lou1920 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Micro-Star International Co., Ltd. GT70
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic 
root=/dev/mapper/ubuntu-root ro acpi=off
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts_pstor
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-17-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1762IMS.50U
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1762
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A:
  dmi.product.name: GT70
  dmi.product.version: REV:1.0
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1129511] Re: Unable to boot system in EFI unless acpi=off quiet splash deleted from grub

2013-09-07 Thread Lou Hurst 
That is to say unable to boot in EFI only.  Legacy all works great all
versions.

Thanks and sorry for the omission.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1129511

Title:
  Unable to boot system in EFI unless acpi=off  quiet splash deleted
  from grub

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70
  -0NC-494US Am not running as a dual boot install. I unable to boot
  this system unless acpi=off and quiet splash is deleted from grub. I
  am running this as the only OS, NOT a dual boot. I am able to boot,
  install and run 12.04 Precise 64 bit on this system, BIOS in legacy
  mode for install and running from HDD. Following steps in Debugging
  ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have
  updated to the latest BIOS on the box.

  WORKAROUND: Use legacy boot mode.

  WORKAROUND: With 12.10 installed to HDD tried booting with all options
  given in the Wiki and with acpi=off and quiet splash deleted, system
  boots ok and into usable environment.

  With acpi=noirq and quiet splash deleted system starts to boot and stops 
with the following as last line:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With pnpacpi=off and quiet splash deleted system starts to boot and stops 
with the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With noapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  With nolapic and quiet splash deleted, system starts to boot and stops with 
the following as last line, same as above:
  [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9

  In the troubleshooting steps I was unable to suspend or hibernate the
  system so am unable to supply a /var/log/kern.log.0 file.

  I am unable to include a tarball of /proc/acpi directory as that
  directory doesn't exist.

  ---
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lou1920 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Micro-Star International Co., Ltd. GT70
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic 
root=/dev/mapper/ubuntu-root ro acpi=off
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-17-generic N/A
   linux-backports-modules-3.5.0-17-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts_pstor
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-17-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E1762IMS.50U
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-1762
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: REV:1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A:
  dmi.product.name: GT70
  dmi.product.version: REV:1.0
  dmi.sys.vendor: Micro-Star International Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1219102] Re: Cannot update or install Ubuntu 13.10

2013-09-07 Thread Christopher M. Penalver 
Richard Vajdel, if it's OEM, you may want to call the vendor for a
warranty event. if it's a custom build, you may want to bring it to your
local computer repair shop so they would be able to diagnose for you.

Hence, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1219102/comments/26
regarding this being due to hardware failure. For future reference you
can manage the status of your own bugs by clicking on the current status
in the yellow line and then choosing a new status in the revealed drop
down box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1219102

Title:
  Cannot update or install Ubuntu 13.10

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  In early stages of development of Saucy salamander i haven't any problems 
with installing 13.10. I was using it for a while  and was waiting for xmir or 
its parts to come in to daily. Later i tried to update saucy salamander, but 
after a while my display went black ( like turned off) and pc went silent, but 
still going. I was like  daily, maybe mistake or something, it will be patched 
soon or later. Today( after 3 weeks, or month)  I made LiveUSB with daily 
build of Saucy and tried to did a clear installation. While installing ( like 
1-2 minutes of progress) it did the same thing as during the earlier update. Pc 
just went silent and display was black. My grub was out. Iam not sure if I am 
able to obtain some info from that because it was during installation and that 
testing partition doesn't look well. Even when Ubuntu 13.10 is booted in  try 
without installing mode, ubuntu runs just like for 3 minutes.
  ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 
k3.8.0-29-generic.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ubuntu 3320 F pulseaudio
   /dev/snd/controlC0:  ubuntu 3320 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'NVidia'/'HDA NVidia at 0xfa00 irq 23'
     Mixer name : 'Realtek ALC883'
     Components : 'HDA:10ec0883,1458e601,0012'
     Controls  : 57
     Simple ctrls  : 22
  Card1.Amixer.info:
   Card hw:1 'HDMI'/'HDA ATI HDMI at 0xf901 irq 43'
     Mixer name : 'ATI R6xx HDMI'
     Components : 'HDA:1002aa01,00aa0100,0010'
     Controls  : 7
     Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'IEC958',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]
  CasperVersion: 1.315.1
  DistroRelease: Ubuntu 12.04
  IwConfig:
   lono wireless extensions.

   eth0  no wireless extensions.
  LiveMediaBuild: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
  Lsusb:
   Bus 001 Device 002: ID 0951:1643 Kingston Technology DataTraveler G3 4GB
   Bus 002 Device 002: ID 15d9:0a4d Trust International B.V.
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Gigabyte Technology Co., Ltd. M52L-S3
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed 
boot=casper  quiet splash -- BOOT_IMAGE=/casper/vmlinuz
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-29-generic N/A
   linux-backports-modules-3.8.0-29-generic  N/A
   linux-firmware1.79.6
  RfKill:

  Tags:  precise running-unity
  Uname: Linux 3.8.0-29-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 03/20/2008
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F6
  dmi.board.name: M52L-S3
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF6:bd03/20/2008:svnGigabyteTechnologyCo.,Ltd.:pnM52L-S3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM52L-S3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: M52L-S3
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:

[Kernel-packages] [Bug 751453] Re: External monitor doesn't work on Toshiba Portege R600

2013-09-07 Thread Nine 
Sorry sor writing again here, but the file that I have uploaded was relative to 
this bug.

You have asked to David Sterratt run the commands, but after some time I
assume that anyone can do the report upload.

I don't know if the owner of the bug is responsible to make all the
updates but this needs a specific computer module and David may not have
it.

If you need the file again please ask, if don't receive any update I
will shut up.

Sorry for the inconvenience.

Thanks.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/751453

Title:
  External monitor doesn't work on Toshiba Portege R600

Status in The Linux Kernel:
  Incomplete
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  In summary, when an external monitor is not connected at boot, I can't
  get the laptop to drive an external monitor. This is a problem in
  Ubuntu Lucid (10.04) but it was not a problem in the Ubuntu Hardy
  (8.04).

  This appears to be a problem with the mainline kernel. I have
  submitted a report at:
  https://bugzilla.kernel.org/show_bug.cgi?id=31292

  WORKAROUND: In the BIOS change Power on Display from auto-selected
  to LCD+Analog RGB.

  External monitor not connected at boot
  --

  * External monitor can be seen in Monitor preferences, but laptop
    does not drive external monitor

  $ xrandr -q
  Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
  VGA1 connected (normal left inverted right x axis y axis)
     1360x768   59.8
     1024x768   60.0
     800x60060.3 56.2
     848x48060.0
     640x48059.9 59.9
  LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1280x800   60.2*+
     1024x768   85.0 75.0 70.1 60.0
     832x62474.6
     800x60085.1 72.2 75.0 60.3 56.2
     640x48085.0 72.8 75.0 59.9
     720x40085.0
     640x40085.1
     640x35085.1
  DVI1 disconnected (normal left inverted right x axis y axis)

  * Mirror screens in Monitor preferences appears to switch
    resolution, but the external monitor is not driven. In this case
    xrandr reports:

  $ xrandr -q
  Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
  VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1360x768   59.8
     1024x768   60.0*
     800x60060.3 56.2
     848x48060.0
     640x48059.9 59.9
  LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 
0mm
     1280x800   60.2 +
     1024x768   85.0 75.0 70.1 60.0*
     832x62474.6
     800x60085.1 72.2 75.0 60.3 56.2
     640x48085.0 72.8 75.0 59.9
     720x40085.0
     640x40085.1
     640x35085.1
  DVI1 disconnected (normal left inverted right x axis y axis)

  * I can't use toshset to connect external monitor:

  $ sudo toshset -video both

  This makes the screen go blank and the  external monitor is not
  driven. I can recover switching to VT1 and typing sudo toshset -video int.

  * Changning the output using the proc file system does not appear to
    work as it should (See http://memebeam.org/toys/ToshibaAcpiDriver
    and http://memebeam.org/toys/ToshibaAcpiVideo) :

  # cat /proc/acpi/toshiba/video
  lcd_out: 1
  crt_out: 0
  tv_out:  0
  # echo crt_out:1  /proc/acpi/toshiba/video
  # cat /proc/acpi/toshiba/video
  lcd_out: 1
  crt_out: 0
  tv_out:  0

  Workaround: External monitor connected at boot
  --

  The external screen is driven automatically. The resolution of the
  laptop screen is adjusted to match the external monitor.

  It's not possible to turn off the monitor using the proc filesystem:

  # cat /proc/acpi/toshiba/video
  lcd_out: 0
  crt_out: 1
  tv_out:  0
  root@bancroftmill:/home/dcs# echo crt_out:0  /proc/acpi/toshiba/video
  root@bancroftmill:/home/dcs# cat /proc/acpi/toshiba/video
  lcd_out: 0
  crt_out: 1
  tv_out:  0

  It is possible to switch using the Monitor preferences tool.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-30-generic 2.6.32-30.59
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13
  Uname: Linux 2.6.32-30-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  AplayDevices:
    List of PLAYBACK Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
     Subdevices: 1/1
     Subdevice

[Kernel-packages] [Bug 1222033] Re: Wifi encryption does not work Kernel modules: rtl8192se

2013-09-07 Thread Christopher M. Penalver 
Ronald Duncan, could you please test the latest upstream kernel available 
following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow 
additional upstream developers to examine the issue. Please do not test the 
daily folder, but the one all the way at the bottom. Once you've tested the 
upstream kernel, please comment on which kernel version specifically you 
tested. If this bug is fixed in the mainline kernel, please add the following 
tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Description changed:

  Information for bug Bug #1222029
  
  linux-image-3.2.0-53-generic
  
  I forced a dist upgrade (the kernal packages were held back)
  Rebooted
  Wifi stopped working, was able to connect to the wifi network but prompted 
for WPA  WPA 2 key and then refused to connect.
- Downgraded to 3.2.0-52 and can now connect again and am reporting the bug
- 
- lspci | grep -i wireless
- 0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
- 
- lspci -vv -s 0f:00.0
- 0f:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB 
Wireless LAN Controller (rev 10)
-  Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN 
Controller
-  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
-  Latency: 0, Cache Line Size: 32 bytes
-  Interrupt: pin A routed to IRQ 18
-  Region 0: I/O ports at a000 [size=256]
-  Region 1: Memory at f020 (32-bit, non-prefetchable) [size=16K]
-  Capabilities: [40] Power Management version 3
-   Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
-   Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-  Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
-   Address:  Data: 
-  Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
-   DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 512ns, L1 64us
-ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
-   DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
-RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
-MaxPayload 128 bytes, MaxReadReq 512 bytes
-   DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
-   LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 512ns, 
L1 64us
-ClockPM+ Surprise- LLActRep- BwNot-
-   LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
-ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-   LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- 
ABWMgmt-
-  Capabilities: [100 v1] Advanced Error Reporting
-   UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- 
ECRC- UnsupReq- ACSViol-
-   UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- 
ECRC- UnsupReq- ACSViol-
-   UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ 
ECRC- UnsupReq- ACSViol-
-   CESta: RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout+ NonFatalErr+
-   CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
-   AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
-  Capabilities: [140 v1] Virtual Channel
-   Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
-   Arb: Fixed- WRR32- WRR64- WRR128-
-   Ctrl: ArbSelect=Fixed
-   Status: InProgress-
-   VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
-Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
-Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
-Status: NegoPending- InProgress-
-  Capabilities: [160 v1] Device Serial Number 88-55-22-fe-ff-4c-e0-00
-  Kernel driver in use: rtl8192se
-  Kernel modules: rtl8192se
+ Downgraded to 3.2.0-52 and can now connect again and am reporting the bug.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-53-generic 3.2.0-53.81
  ProcVersionSignature: Ubuntu 3.2.0-53.81-generic 3.2.50
  Uname: Linux 3.2.0-53-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
-   List of CAPTURE Hardware Devices 
-  card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
-

  1   2   3   >