[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Thanks for the detailed feedback, Pierre. I'll ask for some feedback from upstream about reverting commit: 786235eeba0e1e85e5cbbb9f97d1087ad03dfa21 ** Also affects: linux (Ubuntu Trusty) Importance: High Status: Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292642] Re: [PACKARD BELL BV EasyNote MV85] suspend/resume failure
Yeah, sure. $ uname -a Linux lillinux 3.14.0-031400rc6-generic #201403100035 SMP Mon Mar 10 04:57:43 UTC 2014 i686 i686 i686 GNU/Linux First suspend action freezes computer as well. Tagging as kernel-bug- exists-upstream. ** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292642 Title: [PACKARD BELL BV EasyNote MV85] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: Still unable to enter suspend mode - computer freezes. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic i686 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.3-0ubuntu1 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Fri Mar 14 11:29:24 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=2a568898-d25b-42e4-aa67-17cc2a0af7d2 InstallationDate: Installed on 2014-03-08 (6 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20140225) InterpreterPath: /usr/bin/python3.4 MachineType: PACKARD BELL BV EasyNote MV85 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-17-generic root=UUID=d8659da2-dabe-4a49-8f24-ba09f9fccc7e ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 SourcePackage: linux Title: [PACKARD BELL BV EasyNote MV85] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 09/11/2006 dmi.bios.vendor: INSYDE dmi.bios.version: R1.15 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: EasyNote MV85 dmi.board.vendor: PACKARD BELL BV dmi.board.version: Base Board Version dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: Packard Bell BV dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnINSYDE:bvrR1.15:bd09/11/2006:svnPACKARDBELLBV:pnEasyNoteMV85:pvrPB49201906:rvnPACKARDBELLBV:rnEasyNoteMV85:rvrBaseBoardVersion:cvnPackardBellBV:ct1:cvrChassisVersion: dmi.product.name: EasyNote MV85 dmi.product.version: PB49201906 dmi.sys.vendor: PACKARD BELL BV To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292642/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292251] Re: [Dell xps 13 9333] kernel panic when booting live usb
** Also affects: linux (Ubuntu Trusty) Importance: High Status: Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292251 Title: [Dell xps 13 9333] kernel panic when booting live usb Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: I'm getting a kernel panic when I try to boot the latest daily image. It did work a couple of days ago(can't remember exact date, but I would guess 9th or 10th of March). I've tried booting it as UEFI and legacy mode, with the same result. I attached an image of the error. This is the 64-bit daily image of ubuntu 14.04 (trusty-desktop- amd64.iso ) 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09) Subsystem: Dell Device [1028:060a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0c00c Data: 4169 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Kernel modules: i915_hsw 00:03.0 Audio device [0403]: Intel Corporation Device [8086:0a0c] (rev 09) Subsystem: Dell Device [1028:060a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID , PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: Data: Capabilities: [90] Subsystem: Dell Device [1028:060a] Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERRE
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292216] Re: hyper-v: Hyper-V drivers missing from UEFI based installer
Hi folks, I confirm that the drivers are not present in the server builds located here: http://cdimage.ubuntu.com/ubuntu-server/daily/current/. Please can you help find out the reason? The drivers are there in the client builds. Our test guys confirmed this by opening up the initrd in the ISO. We see the following contents in the initrd: abhishek@abhishek-Virtual-Machine:/tmp/content$ ls bin etc initrd lib64 mnt run sys usr dev init lib media proc sbin tmp var abhishek@abhishek-Virtual-Machine:/tmp/content$ find . -name '*hv*' ./lib/modules/3.13.0-17-generic/kernel/drivers/hv ./lib/modules/3.13.0-17-generic/kernel/drivers/hv/hv_vmbus.ko abhishek@abhishek-Virtual-Machine:/tmp/content$ find . -name '*hyperv*' ./lib/modules/3.13.0-17-generic/kernel/drivers/input/serio/hyperv-keyboard.ko The remaining drivers that are needed are: hv_utils hv_mouse hv_storvsc Please let us know how we may help further. Thanks, Abhishek -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292216 Title: hyper-v: Hyper-V drivers missing from UEFI based installer Status in “linux” package in Ubuntu: In Progress Status in “linux” source package in Trusty: In Progress Bug description: Hi folks, We are unable to create Generation 2 VMs because Hyper-V drivers are missing from the UEFI based alternate installer for server builds. The ask is to include all hyper-v drivers in to the alternate server installer. Please see below bug for more details: https://bugs.launchpad.net/bugs/1285434 I opened a new bug because wasn't sure if the above bug is still visible. Please help fix this as soon as possible as testing is blocked. Thanks, Abhishek To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292216/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292251] Re: [Dell xps 13 9333] kernel panic when booting live usb
Also, do you have a prior version of Ubuntu on the system that boots? If so, can you install the 3.13.16.36 kernel and see if it also has the issue? It can be downloaded from: https://launchpad.net/ubuntu/+source/linux/3.13.0-16.36/+build/5659610 If 3.13.0-16.36 does in fact boot, can you then try 3.13.0-17.37 and confirm it does not boot? It can be downloaded from: https://launchpad.net/ubuntu/+source/linux/3.13.0-17.37/+build/5800060 For both these kernels, you need to install both the linux-image and linux-image-extra .deb packages. Thanks in advance! ** Tags added: kernel-key needs-bisect -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292251 Title: [Dell xps 13 9333] kernel panic when booting live usb Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: I'm getting a kernel panic when I try to boot the latest daily image. It did work a couple of days ago(can't remember exact date, but I would guess 9th or 10th of March). I've tried booting it as UEFI and legacy mode, with the same result. I attached an image of the error. This is the 64-bit daily image of ubuntu 14.04 (trusty-desktop- amd64.iso ) 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09) Subsystem: Dell Device [1028:060a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0c00c Data: 4169 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Kernel modules: i915_hsw 00:03.0 Audio device [0403]: Intel Corporation Device [8086:0a0c] (rev 09) Subsystem: Dell Device [1028:060a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID , PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: Data: Capabilities: [90] Subsystem: Dell Device [1028:060a] Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 No
[Kernel-packages] [Bug 1220577] Re: [HP Pavilion 15 Sleekbook] wireless hotkey function loss on 12.04.3 but works on 12.04.2
I started a kernel bisect between v3.6final and v3.7-rc1. The kernel bisect will require testing of about 13 test kernels. I built the first test kernel, up to the following commit: 24d7b40a60cf19008334bcbcbd98da374d4d9c64 The test kernel can be downloaded from: http://kernel.ubuntu.com/~jsalisbury/lp1220577 Can you test that kernel and report back if it has the bug or not. I will build the next test kernel based on your test results. Thanks in advance -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1220577 Title: [HP Pavilion 15 Sleekbook] wireless hotkey function loss on 12.04.3 but works on 12.04.2 Status in “linux” package in Ubuntu: Incomplete Bug description: CID 201209-11789 Hardware: HP Pavilion 15 Sleekbook image: 12.04.3 Step to reproduce the bug: 1. boot into the system 2. connect to wireless AP (if any) via the indicator on Desktop (upper-right hand side) 3. if connected, make sure we could surf on internet 4. press the wireless hotkey, in this case, it is F12 Expected result: 1. the wireless will lose connection 2. no AP on the scanning list of the wireless desktop indicator 3. wireless LED will change color (from white to orange) Actual result: nothing happened More information may help: 1. "rfkill list" shows the soft block was still "no" after the wireless hotkey is pressed 2. "sudo showkey -k" has no response when the wireless hotkey is pressed 3. 12.04.2 will not have this bug on the same machine ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.8.0-29-generic 3.8.0-29.42~precise1 [modified: boot/vmlinuz-3.8.0-29-generic] ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 Date: Wed Sep 4 16:06:17 2013 InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64 (20130820.1) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-lts-raring UpgradeStatus: No upgrade log present (probably fresh install) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.8.0-29-generic. ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 1: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 1862 F pulseaudio /dev/snd/controlC0: ubuntu 1862 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'HDMI'/'HDA ATI HDMI at 0x90344000 irq 46' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100300' Controls : 7 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'Generic'/'HD-Audio Generic at 0x9034 irq 16' Mixer name : 'IDT 92HD99BXX' Components : 'HDA:111d76e5,103c1937,00100303' Controls : 20 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=675c5759-cc72-47fa-8bd7-7ee264d629d9 InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64 (20130820.1) MachineType: Hewlett-Packard HP Pavilion Sleekbook 14 PC MarkForUpload: True NonfreeKernelModules: fglrx Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic root=UUID=7cd69704-76ab-400e-87fa-ace22dc1d651 ro quiet splash ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 RelatedPackageVersions: linux-restricted-modules-3.8.0-29-generic N/A linux-backports-modules-3.8.0-29-generic N/A linux-firmware1.79.6 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: precise running-unity Uname: Linux 3.8.0-29-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/01/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.13 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1937 dmi.board.vendor: Hewlett-Packard dmi.board.version: 87.0B dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyd
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Link to message sent upstream: https://lkml.org/lkml/2014/3/14/475 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1291969] Re: No usb on resume from suspend
Do you have an easy way to reproduce the issue? If so, we can perform a kernel bisect to identify the commit that introduced the bug. Also, it would be good to know if the issue also happens with the latest mainline kernel, or if it's already been fixed there. It can be downloaded from: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc6-trusty/ ** Changed in: linux (Ubuntu) Importance: Medium => High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1291969 Title: No usb on resume from suspend Status in “linux” package in Ubuntu: Confirmed Bug description: My XPS13 running 14.04 sometimes loses its USB ports after resume from suspend. When this happens the entire bus seems dead - both external ports do not work, and internal USB devices (webcam, touchscreen) are also non-functional. Furthermore lsusb shows no devices attached. Rebooting or performing another suspend/resume cycle will clear the problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: steve 2868 F pulseaudio /dev/snd/controlC0: steve 2868 F pulseaudio CurrentDesktop: Unity Date: Thu Mar 13 08:36:46 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=79084358-087f-4cee-a0be-e2f78361873f InstallationDate: Installed on 2013-12-02 (100 days ago) InstallationMedia: Ubuntu 12.04 "Precise" - Build amd64 LIVE Binary 20130203-13:50 Lsusb: Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS13 9333 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=0b9db31c-747b-40ad-bbbd-13a9a29caece ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 RfKill: 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-02-12 (28 days ago) dmi.bios.date: 11/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A01 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA01:bd11/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291969/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Just for completeness, can you test the latest mainline kernel, which can be downloaded from: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc6-trusty/ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1291969] Re: No usb on resume from suspend
Looks like there is an issue during the freeze: [92457.421160] usb 2-6: reset full-speed USB device number 24 using xhci_hcd [92462.425009] xhci_hcd :00:14.0: Timeout while waiting for address device command [92462.629280] usb 2-6: Device not responding to set address. [92462.833374] usb 2-6: device not accepting address 24, error -71 [92462.945452] usb 2-6: reset full-speed USB device number 24 using xhci_hcd [92467.949443] xhci_hcd :00:14.0: Timeout while waiting for address device command [92468.153780] usb 2-6: Device not responding to set address. [92468.357814] usb 2-6: device not accepting address 24, error -71 [92468.470010] usb 2-6: reset full-speed USB device number 24 using xhci_hcd [92473.473935] xhci_hcd :00:14.0: Timeout while waiting for address device command [92473.678207] usb 2-6: Device not responding to set address. [92473.882303] usb 2-6: device not accepting address 24, error -71 [92473.994403] usb 2-6: reset full-speed USB device number 24 using xhci_hcd [92478.998472] xhci_hcd :00:14.0: Timeout while waiting for address device command [92479.202716] usb 2-6: Device not responding to set address. [92479.406726] usb 2-6: device not accepting address 24, error -71 [92479.406827] usb 2-6: USB disconnect, device number 24 [92479.407920] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with disabled ep 8800a36c5000 [92479.407926] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with disabled ep 8800a36c5040 [92479.407931] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with disabled ep 8800a36c5080 [92479.407935] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with disabled ep 8800b8279600 [92479.407939] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with disabled ep 8800b8279640 [92479.489554] PM: Syncing filesystems ... done. [92479.497183] PM: Preparing system for mem sleep [92479.497453] Freezing user space processes ... (elapsed 0.001 seconds) done. [92479.522865] usb 2-6: new full-speed USB device number 26 using xhci_hcd [92484.526861] xhci_hcd :00:14.0: Timeout while waiting for address device command [92484.731193] usb 2-6: Device not responding to set address. [92484.935186] usb 2-6: device not accepting address 26, error -71 [92485.047294] usb 2-6: new full-speed USB device number 27 using xhci_hcd [92490.051312] xhci_hcd :00:14.0: Timeout while waiting for address device command [92490.255635] usb 2-6: Device not responding to set address. [92490.459627] usb 2-6: device not accepting address 27, error -71 [92490.571742] usb 2-6: new full-speed USB device number 28 using xhci_hcd [92495.575773] xhci_hcd :00:14.0: Timeout while waiting for address device command -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1291969 Title: No usb on resume from suspend Status in “linux” package in Ubuntu: Confirmed Bug description: My XPS13 running 14.04 sometimes loses its USB ports after resume from suspend. When this happens the entire bus seems dead - both external ports do not work, and internal USB devices (webcam, touchscreen) are also non-functional. Furthermore lsusb shows no devices attached. Rebooting or performing another suspend/resume cycle will clear the problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: steve 2868 F pulseaudio /dev/snd/controlC0: steve 2868 F pulseaudio CurrentDesktop: Unity Date: Thu Mar 13 08:36:46 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=79084358-087f-4cee-a0be-e2f78361873f InstallationDate: Installed on 2013-12-02 (100 days ago) InstallationMedia: Ubuntu 12.04 "Precise" - Build amd64 LIVE Binary 20130203-13:50 Lsusb: Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS13 9333 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=0b9db31c-747b-40ad-bbbd-13a9a29caece ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 RfKill: 1: phy0: Wireless LAN Soft blocked: no
Re: [Kernel-packages] [Bug 1292153] Re: [LENOVO 20A8S02Y00] suspend/resume failure
Hi, It's acutually worse. Hibernate does *not* reliably work, more often than not it cannot resume. In addition grub needs 50! seconds to startup, allow me to navigate to the 3.13 kernel and then start to boot. The boot process itself is fast as this computer has an ssd. The downloaded 3.14 kernel only started up once and the following three times it did end with a black screen and no prompt or any way to continue. I also updated the BIOS to the newest 1.09 version from Lenovo. No change. regards On 14 March 2014 00:54, Patrik Marxer wrote: > Hi, > > I downloaded the kernel of which I thought it was the latest: > uname -a > Linux c1g2 3.14.0-031400rc6-generic #201403100035 SMP Mon Mar 10 04:36:54 > UTC 2014 x86_64 x86_64 x86_64 GNU/Linux > > The problem persists, there is no suspend. When suspend is invoked, the > screen goes blank, the suspend-light comes on and begins blinking, but the > fan still works like crazy and it does not wake up, when pressing the > on-key. Only a hard-reset works. > > Hibernate works though, unfortunately there is no menu item in ubuntu > because...? No idea. > > regards > > > On 13 March 2014 20:16, Joseph Salisbury > wrote: > >> Would it be possible for you to test the latest upstream kernel? Refer >> to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest >> v3.14 kernel[0]. >> >> If this bug is fixed in the mainline kernel, please add the following >> tag 'kernel-fixed-upstream'. >> >> If the mainline kernel does not fix this bug, please add the tag: >> 'kernel-bug-exists-upstream'. >> >> If you are unable to test the mainline kernel, for example it will not >> boot, please add the tag: 'kernel-unable-to-test-upstream'. >> Once testing of the upstream kernel is complete, please mark this bug as >> "Confirmed". >> >> >> Thanks in advance. >> >> >> [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc6-trusty/ >> >> ** Changed in: linux (Ubuntu) >>Importance: Undecided => Medium >> >> ** Changed in: linux (Ubuntu) >>Status: Confirmed => Incomplete >> >> -- >> You received this bug notification because you are subscribed to the bug >> report. >> https://bugs.launchpad.net/bugs/1292153 >> >> Title: >> [LENOVO 20A8S02Y00] suspend/resume failure >> >> Status in “linux” package in Ubuntu: >> Incomplete >> >> Bug description: >> On x1 Carbon 2nd Generation. Same Problem with suspend (and probably >> hibernate) as i.e. Fedora 20 and Ubuntu 12.04.. >> >> ProblemType: KernelOops >> DistroRelease: Ubuntu 14.04 >> Package: linux-image-3.13.0-17-generic 3.13.0-17.37 [modified: >> boot/vmlinuz-3.13.0-17-generic] >> ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 >> Uname: Linux 3.13.0-17-generic x86_64 >> Annotation: This occured during a previous suspend and prevented it >> from resuming properly. >> ApportVersion: 2.13.3-0ubuntu1 >> Architecture: amd64 >> AudioDevicesInUse: >>USERPID ACCESS COMMAND >>/dev/snd/controlC0: lightdm1279 F pulseaudio >> mapw 1698 F pulseaudio >>/dev/snd/controlC1: lightdm1279 F pulseaudio >> mapw 1698 F pulseaudio >> Date: Thu Mar 13 19:30:31 2014 >> ExecutablePath: /usr/share/apport/apportcheckresume >> Failure: suspend/resume >> HibernationDevice: RESUME=UUID=83c2a89a-31e7-4827-9a1e-9744efda24ba >> InstallationDate: Installed on 2014-03-13 (0 days ago) >> InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 >> (20140313) >> InterpreterPath: /usr/bin/python3.4 >> MachineType: LENOVO 20A8S02Y00 >> ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume >> ProcEnviron: >>TERM=linux >>PATH=(custom, no user) >> ProcFB: 0 inteldrmfb >> ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic >> root=UUID=708440ee-1184-49a9-94d4-bad48d72195c ro quiet splash vt.handoff=7 >> PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No >> PulseAudio daemon running, or not running as session daemon. >> RelatedPackageVersions: >>linux-restricted-modules-3.13.0-17-generic N/A >>linux-backports-modules-3.13.0-17-generic N/A >>linux-firmware 1.126 >> SourcePackage: linux >> Title: [LENOVO 20A8S02Y00] suspend/resume failure >> UpgradeStatus: No upgrade log present (probably fresh install) >> UserGroups: >> >> dmi.bios.date: 02/13/2014 >> dmi.bios.vendor: LENOVO >> dmi.bios.version: GRET32WW (1.09 ) >> dmi.board.asset.tag: Not Available >> dmi.board.name: 20A8S02Y00 >> dmi.board.vendor: LENOVO >> dmi.board.version: Not Defined >> dmi.chassis.asset.tag: No Asset Information >> dmi.chassis.type: 10 >> dmi.chassis.vendor: LENOVO >> dmi.chassis.version: Not Available >> dmi.modalias: >> dmi:bvnLENOVO:bvrGRET32WW(1.09):bd02/13/2014:svnLENOVO:pn20A8S02Y00:pvrThinkPadX1Carbon2nd:rvnLENOVO:rn20A8S02Y00:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: >> dmi.p
[Kernel-packages] [Bug 1275161] Re: Realtek driver r8169 slow network speed
I'm having the exact same problem, Internet being painfully unstable and slow. Running Ubuntu 13.10 amd64 and driver r8169 on 1000Mb/s. Just switched from Windows 7, didn't have any problems there. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1275161 Title: Realtek driver r8169 slow network speed Status in “linux” package in Ubuntu: Triaged Bug description: Network speed variable, some sites not open or very slow (example: amazon.com). Replace driver with r8168 from this http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#2 not help. ubuntu amd64 13.10 (also tested daily build 14.04 30 Jan 2014) kernel 3.11.0-15-generic lspci -nn | grep Ethernet 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) --- ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dem1250 F pulseaudio /dev/snd/controlC1: dem1250 F pulseaudio /dev/snd/pcmC1D0c: dem1250 F...m pulseaudio /dev/snd/pcmC1D0p: dem1250 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory CurrentDmesg: [ 712.730809] hda-intel :00:1b.0: Unstable LPIB (19200 >= 1920); disabling LPIB delay counting DistroRelease: Ubuntu 13.10 IwConfig: Error: [Errno 2] No such file or directory MachineType: MSI MS-7817 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=2982e0ae-6485-4894-9306-01c72c340d13 ro ProcVersionSignature: Ubuntu 3.11.0-15.25-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 RfKill: Error: [Errno 2] No such file or directory Tags: saucy Uname: Linux 3.11.0-15-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo video dmi.bios.date: 06/20/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.0 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H81M-P33 (MS-7817) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.0:bd06/20/2013:svnMSI:pnMS-7817:pvr1.0:rvnMSI:rnH81M-P33(MS-7817):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.name: MS-7817 dmi.product.version: 1.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1275161/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1098216] Re: Regression in brightness control on Lenovo Thinkpad X230 (+tablet) and X1 Carbon
Same bug (same workarounds) on ThinkPad T440s with current Trusty. ** Tags added: trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1098216 Title: Regression in brightness control on Lenovo Thinkpad X230 (+tablet) and X1 Carbon Status in The Linux Kernel: In Progress Status in “linux” package in Ubuntu: Triaged Status in “linux” package in Fedora: Unknown Bug description: == Raring SRU Justification == Impact: A number of ThinkPad models have a workaround in the ACPI backlight implementation for Windows 8 that more or less completely breaks backlight control. Fix: Add an OSI quirk to no longer claim to be Windows 8 on these machines, causing the firmware to revert to the older, working behavior. Test Case: Verified on LP #1098216 and bugzill.kernel.org #51231. --- Something changed between the 3.5 and the 3.7 kernel, leading to broken brightness control on my Thinkpad x230. Here are some test results: == 3.5.0-21-generic == === Post-boot values === /sys/class/backlight: - intel-backlight + actual_brightness => 4438 + bl_power => 0 + brightness => 4438 + max_brightness => 4438 - acpi_video0 + actual_brightness => 15 + bl_power => 0 + brightness => 15 + max_brightness => 15 === Tests === echo 0 > acpi_video0/brightness => works echo 0 > intel_backlight/brightness => works == 3.8.0-0-generic == === Post-boot values === /sys/class/backlight: - intel-backlight + actual_brightness => 4438 + bl_power => 0 + brightness => 4438 + max_brightness => 4438 - acpi_video0 + actual_brightness => 100 + bl_power => 0 + brightness => 100 + max_brightness => 100 === Tests === echo 0 > acpi_video0/brightness => doesn't do anything echo 0 > intel_backlight/brightness => works --- ApportVersion: 2.8-0ubuntu1 Architecture: amd64 CheckboxSubmission: 12108b8b8b67d760cdd84f1b9574e7f3 CheckboxSystem: bb422ca46d02494cdbc459927a98bc2f DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2012-09-02 (129 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Alpha amd64 (20120902) MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 3.8.0-0.1-generic 3.8.0-rc3 Tags: raring Uname: Linux 3.8.0-0-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WORKAROUND: Add to /etc/default/grub in the variable "GRUB_CMDLINE_LINUX_DEFAULT": acpi_osi=\"!Windows 2012\" e.g: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"!Windows 2012\"" Then run "sudo update-grub". To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1098216/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292627] Re: [Dell Inc. Inspiron 1521] suspend/resume failure
Hi, After a few tests with the latest kernel (3.14.0-031400rc6-generic #201403100035 SMP Mon Mar 10 04:36:54 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux) it is far better, but not enough! Basically, the resume work, but a kernel thread (kworker) is eating 100% of 1 CPU core. Time to time, it stop working for, something like less than 1s. I was able to launch htop under an X terminal, to see that. The time this worker thread work, is not constant, something between 10s to 2min. During this time X freeze completely, and all others programs with it. During the clean reboot ('sudo reboot" in my X terminal), it happend too. The events are still monitored during that time. Even if the screen was frozen, I could type on the keybord or move the mouse. Just have to wait the worker thread to let others programs to work a little. I tried to look at the logs, but I didn't found any evidence which may permit me to better know what was going on. The only error in /var/log/pm-suspend.log is: Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: Failed to connect to non-global ctrl_ifname: (null) error: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success. I don't know if it is related. You may notice that I have an another bug on this laptop. I can't use the proprietary WiFi driver (which is installed by default). This driver (firmware ? crashed with an "invalid instruction" error. It seems to not be compatible with an "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55" (on GNU/Linux only, I tried Win8.1 on this laptop, the driver worked fine). That is why, I only use the ethernet connexion,with the FOSS driver. Again, I don't know if this information can help too. I will retry with the stock kernel, maybe it's the same, I just didn't wait 2min before performing a halt/boot. There is no hardware reset on laptops :-( Thank you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292627 Title: [Dell Inc. Inspiron 1521] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: On resume, the computer shutdown brutally, before displaying something. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: vono 1891 F pulseaudio Date: Fri Mar 14 18:11:12 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=31d2ebdc-1a41-437f-a0a4-b28873898fc9 InstallationDate: Installed on 2014-02-03 (38 days ago) InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140203) InterpreterPath: /usr/bin/python3.4 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. Inspiron 1521 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=752d0cec-2696-4b2f-8813-b503fa2de9fe ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux Title: [Dell Inc. Inspiron 1521] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 10/30/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0KY766 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA04:bd10/30/2007:svnDellInc.:pnInspiron1521:pvr:rvnDellInc.:rn0KY766:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Inspiron 1521 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292627/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 986524] Re: 1002:6739 [Asus P6T] radeon 0000:02:00.0: GPU lockup CP stall for more than 10000msec
Hi, Sorry I didn't reply ... or very late! Since I had this bug, I switched to the fglrx driver. I have tested Ubuntu 13.10 a little bit, a few days, with the mesa driver, and I didn't get it again. I have updated my BIOS too, but there was no change, anyway, I don't have anymore an Ubuntu 12.04.0 installed, I now run the 3.11 kernel on my Ubuntu 12.04. I will start soon to test Ubuntu 14.04 on my main computer (I currently only run it on my second one). But I think, this problem seems to be solved with newer kernel + mesa + Xorg stack. Thank you for the support. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/986524 Title: 1002:6739 [Asus P6T] radeon :02:00.0: GPU lockup CP stall for more than 1msec Status in The Linux Kernel: New Status in “linux” package in Ubuntu: Incomplete Bug description: Often, the Xorg session freeze, go to black screen, and is display again. Most of the time Xorg stop to respond. I'm not sure what exactly is the cause of the problem, probably some instructions send to the GPU by compiz, which make the kernel GPU code to be locked. So my supposition is that the kernel code can have a deadlock situation. The only trace of error I have is in the kernel log (the kernel itself do not crashed): [ 808.804250] radeon :02:00.0: GPU lockup CP stall for more than 1msec [ 808.804255] GPU lockup (waiting for 0xA23F last fence id 0xA23E) [ 808.805394] radeon :02:00.0: GPU softreset [ 808.805398] radeon :02:00.0: GRBM_STATUS=0xB2703828 [ 808.805401] radeon :02:00.0: GRBM_STATUS_SE0=0x1C07 [ 808.805404] radeon :02:00.0: GRBM_STATUS_SE1=0x0807 [ 808.805407] radeon :02:00.0: SRBM_STATUS=0x20C0 [ 808.805422] radeon :02:00.0: GRBM_SOFT_RESET=0x7F6B [ 808.805526] radeon :02:00.0: GRBM_STATUS=0x3828 [ 808.805529] radeon :02:00.0: GRBM_STATUS_SE0=0x0007 [ 808.805532] radeon :02:00.0: GRBM_STATUS_SE1=0x0007 [ 808.805535] radeon :02:00.0: SRBM_STATUS=0x20C0 [ 808.806535] radeon :02:00.0: GPU reset succeed [ 808.832454] [drm] PCIE GART of 512M enabled (table at 0x0004). [ 808.832587] radeon :02:00.0: WB enabled [ 808.849202] [drm] ring test succeeded in 2 usecs [ 808.849217] [drm] ib test succeeded in 3 usecs This can loop 1 to 5 times, with a few seconds between them. This situation can happens any time, and rarely I can continue to use my session. Like I said, the kernel itself do not crash, generally, I login using an another computer with ssh, and type "sudo reboot". I have earch a little for that problem, I've found some, having "GPU lockup CP stall for more than 1msec" but they seems to not be related to my problem. My ATI card is an "Sapphire Radeon HD 6850 1Go", and I use the free software driver. Using the previous version of Ubuntu I didn't have this error. I have almost no hope to have this bug fixed (too few infos, no one having it), but is there some method I can use to get more informations on this problem ? I will try a kernel debugging, but for a "random" bug, it will be more harder. Some day it crash, some it don't crash! ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-23-generic 3.2.0-23.36 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: vono 2113 F pulseaudio /dev/snd/controlC2: vono 2113 F pulseaudio /dev/snd/controlC0: vono 2113 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf3cf8000 irq 69' Mixer name : 'Realtek ALC1200' Components : 'HDA:10ec0888,10438357,00100101' Controls : 45 Simple ctrls : 21 Card1.Amixer.info: Card hw:1 'XFi'/'Creative X-Fi 20K1 SB073x' Mixer name : '20K1' Components : '' Controls : 27 Simple ctrls : 10 Card2.Amixer.info: Card hw:2 'Generic'/'HD-Audio Generic at 0xf3dfc000 irq 70' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card2.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] CurrentDmesg: [ 16.527645] r8169 :05:00.0: eth0: link up [ 16.528212] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.448590] eth0: no IPv6 routers present Date: Sat Apr 21 12:25:11 2012 HibernationDevice: RESUME=UUI
[Kernel-packages] [Bug 1290151] Re: hyper-v: Hyper-V network broken for Trusty on Server 2008R2
Daily build ISO dated 13-Mar-2014 06:46 with size 564M has still the old kernel version branch: 3.13.0-17 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1290151 Title: hyper-v: Hyper-V network broken for Trusty on Server 2008R2 Status in “linux” package in Ubuntu: Fix Committed Bug description: Due to a bug in the Hyper-V host verion 2008R2, we need to use a slightly smaller receive buffer size, otherwise the buffer will not be accepted by the legacy hosts. Without this fix, the network driver will not load while hosting Trusty on Server 2008R2. The following patch addresses the problem: [PATCH net-next] hyperv: Change the receive buffer size for legacy hosts Due to a bug in the Hyper-V host verion 2008R2, we need to use a slightly smaller receive buffer size, otherwise the buffer will not be accepted by the legacy hosts. Signed-off-by: Haiyang Zhang --- drivers/net/hyperv/hyperv_net.h |1 + drivers/net/hyperv/netvsc.c |6 +- 2 files changed, 6 insertions(+), 1 deletions(-) diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 39fc230..ea5f182 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -516,6 +516,7 @@ struct nvsp_message { #define NETVSC_MTU 65536 #define NETVSC_RECEIVE_BUFFER_SIZE (1024*1024*16) /* 16MB */ +#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY (1024*1024*15) /* 15MB */ #define NETVSC_RECEIVE_BUFFER_ID0xcafe diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 1a0280d..daddea2 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -365,6 +365,11 @@ static int netvsc_connect_vsp(struct hv_device *device) goto cleanup; /* Post the big receive buffer to NetVSP */ + if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_2) + net_device->recv_buf_size = NETVSC_RECEIVE_BUFFER_SIZE_LEGACY; + else + net_device->recv_buf_size = NETVSC_RECEIVE_BUFFER_SIZE; + ret = netvsc_init_recv_buf(device); cleanup: @@ -898,7 +903,6 @@ int netvsc_device_add(struct hv_device *device, void *additional_info) ndev = net_device->ndev; /* Initialize the NetVSC channel extension */ - net_device->recv_buf_size = NETVSC_RECEIVE_BUFFER_SIZE; spin_lock_init(&net_device->recv_pkt_list_lock); INIT_LIST_HEAD(&net_device->recv_pkt_list); -- 1.7.4.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1290151/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292509] Re: Missing statistics for `tx_bytes`, `tx_packets`, `rx_bytes` and `rx_packets` since Ubuntu 13.10
Hi Joseph, The has been fixed in v3.14-rc6-trusty mainline kernel. But I guess, 14.04 LTS would ship with kernel v3.13. Can the fix be back-ported from v3.14 to v3.13 before release? Moreover, this bug relating to bluetooth has also been fixed in v3.14: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245150 Thanks :) ** Tags added: kernel-fixed-upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292509 Title: Missing statistics for `tx_bytes`, `tx_packets`, `rx_bytes` and `rx_packets` since Ubuntu 13.10 Status in “linux” package in Ubuntu: Confirmed Status in “linux” package in Fedora: New Bug description: I am using Ubuntu 13.10 and have an Ethernet connection to connect to the Internet. If I set my ISP username and password in router-cum-modem (ADSL) itself (i.e.; I get connected to internet automatically by just powering on my router); I don't get the information about `tx_bytes`, `tx_packets`, `rx_bytes` and `rx_packets` anymore. If I don't put the username and password in router; and instead use `sudo pppoeconf` to configure my connection by providing my ISP username and password; I get the information about `tx_bytes`, `tx_packets`, `rx_bytes` and `rx_packets` as expected. It is probably because of this bug, that Gnome System Monitor doesn't update Network History as reported earlier: https://bugs.launchpad.net/ubuntu/+source/gnome-system- monitor/+bug/1241894 === I have run the following commands on Ubuntu 13.10 installed on my system as per the answers given to this question: http://serverfault.com/questions/533513/how-to-get-tx-rx-bytes- without-ifconfig $ uname -a Linux aditya-desktop 3.11.0-18-generic #32-Ubuntu SMP Tue Feb 18 21:13:28 UTC 2014 i686 athlon i686 GNU/Linux $ ifconfig eth0 Link encap:Ethernet HWaddr 94:de:80:34:47:7b inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::96de:80ff:fe34:477b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:18 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:49 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4819 (4.8 KB) TX bytes:4819 (4.8 KB) $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG0 00 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 00 eth0 $ cat /proc/net/dev Inter-| Receive| Transmit face |bytespackets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1900701601000 0 0 0 1900701601000 0 0 0 eth0: 0 0000 0 0 0 0 0000 0 0 0 $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVRTX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 0 0 0 0 0 0 0 0 BMRU lo65536 0 1601 0 0 0 1601 0 0 0 LRU $ ip -s link 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 RX: bytes packets errors dropped overrun mcast 190070 1601 0 0 0 0 TX: bytes packets errors dropped carrier collsns 190070 1601 0 0 0 0 2: eth0: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000 link/ether 94:de:80:34:47:7b brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 0 00 0 0 0 TX: bytes packets errors dropped carrier collsns 0 00 0 0 0 $ cat /sys/class/net
[Kernel-packages] [Bug 1245150] Re: 0a12:0001 Bluetooth Dongle (Cambridge Silicon Radio, Ltd) doesn't work after upgrading to Saucy
I have just tested v3.14-rc6-trusty from mainline kernel and the issue seems to have been fixed. http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc6-trusty/ ** Tags added: kernel-fixed-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1245150 Title: 0a12:0001 Bluetooth Dongle (Cambridge Silicon Radio, Ltd) doesn't work after upgrading to Saucy Status in “linux” package in Ubuntu: Triaged Bug description: After upgrading to Saucy, the bluetooth-indicator was no longer present in the taskbar. If I go to System Settings >> Bluetooth; it shows as "Bluetooth is disabled" and toggling the On|Off Switch doesn't enable it: http://i.stack.imgur.com/vwfEo.png I have installed the Blueman Device Manager to solve this issue and its bluetooth indicator is shown on the taskbar, but it doesn't function. However, toggling the On|Off switch in System Settings >> Bluetooth, grays out the icon of Blueman indicator in the taskbar. To debug the issue, I am following the instructions mentioned at https://wiki.ubuntu.com/Kernel/KernelBisection. I have downloaded and installed the kernals from https://launchpad.net/ubuntu/saucy/+source/linux: - 3.9.0-7.15 works for me - 3.10.0-0.6 doesn't work For further commit bisecting, I have downloaded the git repository of `ubuntu-saucy` by running: git clone git://kernel.ubuntu.com/ubuntu /ubuntu-saucy.git To see how many commits are there in between, I run the following command: git log --oneline Ubuntu-3.9.0-7.15..Ubuntu-3.10.0-0.6 | wc 14802 117434 922801 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic i686 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: aditya 1767 F pulseaudio /dev/snd/pcmC0D0c: aditya 1767 F...m pulseaudio /dev/snd/pcmC0D0p: aditya 1767 F...m pulseaudio CurrentDmesg: [ 23.616595] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.617367] alx :02:00.0 eth0: NIC Up: 100 Mbps Full [ 23.617591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Sun Oct 27 15:17:38 2013 HibernationDevice: RESUME=UUID=98bed5fe-b467-4bb4-9173-177ee22f8c76 InstallationDate: Installed on 2013-07-06 (112 days ago) InstallationMedia: This IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Gigabyte Technology Co., Ltd. GA-78LMT-S2PT MarkForUpload: True ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=1274a22c-31b4-4c65-8a0f-8eede0288fea ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-10-18 (8 days ago) dmi.bios.date: 11/05/2012 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FC dmi.board.name: GA-78LMT-S2PT dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFC:bd11/05/2012:svnGigabyteTechnologyCo.,Ltd.:pnGA-78LMT-S2PT:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-78LMT-S2PT:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: GA-78LMT-S2PT dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245150/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
That return statement is called only when wait_for_completion_killable() returned an error. That is, the caller received SIGKILL while waiting for kthreadd to create a kernel thread. That matches your bisection result because commit 786235ee changed to return to the caller when the caller received SIGKILL in order to allow the OOM killer to kill the process waiting for kthreadd to create a kernel thread. The changelog which I expected for that commit is shown below. -- [PATCH] kthread: Make kthread_create() killable. Any user process callers of wait_for_completion() except global init process might be chosen by the OOM killer while waiting for completion() call by some other process which does memory allocation. When such users are chosen by the OOM killer when they are waiting for completion() in TASK_UNINTERRUPTIBLE, the system will be kept stressed due to memory starvation because the OOM killer cannot kill such users. kthread_create() is one of such users and this patch fixes the problem for kthreadd by making kthread_create() killable. Signed-off-by: Tetsuo Handa Cc: Oleg Nesterov Acked-by: David Rientjes Signed-off-by: Andrew Morton -- I think there are two problems listed below. (a) Somebody is sending SIGKILL to the caller of kthread_create(). Somebody is "systemd" waited for timeout? The caller is "PID: 9847 Comm: systemd-udevd" ? (b) Error handling of the caller of kthread_create() is wrong. mptsas_probe() calls mptsas_remove() when scsi_host_alloc() returned NULL due to receiving SIGKILL. But mptsas_remove() assumes that "ioc->sh = sh;" was already called with sh != NULL which means scsi_host_alloc() did not return NULL. scsi_host_alloc() can return NULL when kzalloc() returned NULL. In other words, the caller of scsi_host_alloc() must be prepared for scsi_host_alloc() returning NULL even if the caller did not receive SIGKILL while waiting for kthreadd to create a kernel thread. Therefore, I don't think reverting commit 786235ee is appropriate because the problem will again happen when kzalloc() in scsi_host_alloc() fails. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292251] Re: [Dell xps 13 9333] kernel panic when booting live usb
I've attached a picture of the log as described in the link you gave me. Regarding installing the newer kernel on my installed system: It should be easily reversible if it doesn't work, right? As I use this computer daily, I don't want to break my current install. Ubuntu 12.04 was pre- installed by DELL if that matters ** Attachment added: "20140315_012512.jpg" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292251/+attachment/4024763/+files/20140315_012512.jpg -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292251 Title: [Dell xps 13 9333] kernel panic when booting live usb Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: I'm getting a kernel panic when I try to boot the latest daily image. It did work a couple of days ago(can't remember exact date, but I would guess 9th or 10th of March). I've tried booting it as UEFI and legacy mode, with the same result. I attached an image of the error. This is the 64-bit daily image of ubuntu 14.04 (trusty-desktop- amd64.iso ) 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09) Subsystem: Dell Device [1028:060a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0c00c Data: 4169 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Kernel modules: i915_hsw 00:03.0 Audio device [0403]: Intel Corporation Device [8086:0a0c] (rev 09) Subsystem: Dell Device [1028:060a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID , PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: Data: Capabilities: [90] Subsystem: Dell Device [1028:060a] Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI brid
[Kernel-packages] [Bug 1292338] Re: Keyboard doesn't mount 14.04 boot
Yes, I can login as a guest then log out and login to my account and the keyboard works. It seems to only happen on boot, and when I click the laguage icon "EN" it works. This also seems to be the issue on another laptop of mine I just installed 14.04 on. So I'm guessing this is a bug, but I don't know much. Not a big deal, just an inconvenience. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292338 Title: Keyboard doesn't mount 14.04 boot Status in “linux” package in Ubuntu: Incomplete Bug description: On the login screen I can't type my password unless I first click the "EN" icon on the menu bar. After this keyboard works fine and no other problems while system is running. Is this a bug? Is this user error? Thanks and LOVE Ubuntu! ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: aaron 2245 F pulseaudio CurrentDesktop: Unity Date: Thu Mar 13 23:55:17 2014 HibernationDevice: RESUME=UUID=51fb8bb9-36d8-41b5-b4dd-014547385e9d InstallationDate: Installed on 2014-03-01 (13 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: Acer Aspire V5-571P ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic.efi.signed root=UUID=624449da-2944-48aa-be3e-59c705e3f326 ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-03-05 (9 days ago) dmi.bios.date: 12/21/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: V2.15 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire V5-571P dmi.board.vendor: Acer dmi.board.version: V2.15 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: Acer dmi.chassis.version: V2.15 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrV2.15:bd12/21/2012:svnAcer:pnAspireV5-571P:pvrV2.15:rvnAcer:rnAspireV5-571P:rvrV2.15:cvnAcer:ct9:cvrV2.15: dmi.product.name: Aspire V5-571P dmi.product.version: V2.15 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292338/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Tetsuo, see my comments above for the diagnosis of two different bugs. I've already identified (b) as well and it's completely orthogonal to the bug in question. No idea about (a), though, your comment is interesting. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1292765] [NEW] [Dell Inc. XPS13 9333] suspend/resume failure
Public bug reported: I did "sudo pm-suspend" and system froze, had to be rebooted. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: roadmr 2479 F pulseaudio /dev/snd/controlC0: roadmr 2479 F pulseaudio Date: Fri Mar 14 23:25:47 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=b3f42395-9011-4653-8497-d979eaa7fa42 InstallationDate: Installed on 2014-03-04 (10 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140304) InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. XPS13 9333 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=37538ab9-ae2c-4128-ad7a-17adebe391c2 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 SourcePackage: linux Title: [Dell Inc. XPS13 9333] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-kerneloops resume suspend trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292765 Title: [Dell Inc. XPS13 9333] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I did "sudo pm-suspend" and system froze, had to be rebooted. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: roadmr 2479 F pulseaudio /dev/snd/controlC0: roadmr 2479 F pulseaudio Date: Fri Mar 14 23:25:47 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=b3f42395-9011-4653-8497-d979eaa7fa42 InstallationDate: Installed on 2014-03-04 (10 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140304) InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. XPS13 9333 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=37538ab9-ae2c-4128-ad7a-17adebe391c2 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 SourcePackage: linux Title: [Dell Inc. XPS13 9333] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292765/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages M
[Kernel-packages] [Bug 1292765] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1292765 Title: [Dell Inc. XPS13 9333] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I did "sudo pm-suspend" and system froze, had to be rebooted. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-17-generic 3.13.0-17.37 ProcVersionSignature: Ubuntu 3.13.0-17.37-generic 3.13.6 Uname: Linux 3.13.0-17-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: roadmr 2479 F pulseaudio /dev/snd/controlC0: roadmr 2479 F pulseaudio Date: Fri Mar 14 23:25:47 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=b3f42395-9011-4653-8497-d979eaa7fa42 InstallationDate: Installed on 2014-03-04 (10 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140304) InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. XPS13 9333 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-17-generic root=UUID=37538ab9-ae2c-4128-ad7a-17adebe391c2 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-17-generic N/A linux-backports-modules-3.13.0-17-generic N/A linux-firmware 1.126 SourcePackage: linux Title: [Dell Inc. XPS13 9333] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1292765/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1268282] Re: Gnome-Panel does not start after upgrading to Saucy 13.10
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1268282 Title: Gnome-Panel does not start after upgrading to Saucy 13.10 Status in “linux” package in Ubuntu: Expired Bug description: this happens after upgrade to Saucy 13.10. Gnome-Panel starts with missing top & bottom panel. I am able to start the gnome-panel from First Terminal by running the command 'DISPLAY=0:0 gnome-panel' ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: sam2308 F pulseaudio /dev/snd/controlC1: sam2308 F pulseaudio /dev/snd/pcmC1D0p: sam2308 F...m pulseaudio /dev/snd/controlC0: sam2308 F pulseaudio Date: Sun Jan 12 18:17:27 2014 HibernationDevice: RESUME=UUID=1e022a8a-3c54-4b20-9374-726749724204 InstallationDate: Installed on 2012-11-04 (433 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name MarkForUpload: True ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=e4a11657-6aab-4c92-acae-acbca96b1065 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 RfKill: SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-10-31 (72 days ago) dmi.bios.date: 12/05/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0804 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: Rampage II Extreme dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 2.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0804:bd12/05/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnRampageIIExtreme:rvrRev2.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1268282/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1124040] Re: 8086:1502 [Lenovo ThinkPad W520] e1000e reconnecting in 12.04
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1124040 Title: 8086:1502 [Lenovo ThinkPad W520] e1000e reconnecting in 12.04 Status in “linux” package in Ubuntu: Expired Bug description: The Intel e1000e kernel NIC driver is constantly reconnecting to my network causing flowstops and errors. I do not know in which exact kernel the problem started since I do not use this laptop wired regularly. Firstly I suspected faulty networking equipment, but the problem persisted on other hardware. WORKAROUND: Fetch driver directly from Intel: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=15817&ProdId=3003&lang=eng Error: Feb 13 12:04:52 stevieray kernel: [ 1451.580536] e1000e: eth0 NIC Link is Down Feb 13 12:04:53 stevieray kernel: [ 1453.229010] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Feb 13 12:04:53 stevieray kernel: [ 1453.229024] e1000e :00:19.0: eth0: 10/100 speed: disabling TSO Feb 13 12:04:53 stevieray NetworkManager[1088]: (eth0): carrier now ON (device state 100) Feb 13 12:05:01 stevieray CRON[3406]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Feb 13 12:05:14 stevieray NetworkManager[1088]: (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Feb 13 12:05:14 stevieray kernel: [ 1473.312198] e1000e: eth0 NIC Link is Down Feb 13 12:05:15 stevieray kernel: [ 1474.944394] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Feb 13 12:05:15 stevieray kernel: [ 1474.944409] e1000e :00:19.0: eth0: 10/100 speed: disabling TSO Feb 13 12:05:15 stevieray NetworkManager[1088]: (eth0): carrier now ON (device state 100) Feb 13 12:05:27 stevieray NetworkManager[1088]: (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Feb 13 12:05:27 stevieray kernel: [ 1486.340811] e1000e: eth0 NIC Link is Down Feb 13 12:05:28 stevieray kernel: [ 1488.008923] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Feb 13 12:05:28 stevieray kernel: [ 1488.008938] e1000e :00:19.0: eth0: 10/100 speed: disabling TSO Feb 13 12:05:28 stevieray NetworkManager[1088]: (eth0): carrier now ON (device state 100) With the Intel Driver: [ 2214.353191] e1000e :00:19.0: PCI INT A disabled [ 2824.335482] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-NAPI [ 2824.335491] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 2824.335548] e1000e :00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2824.335570] e1000e :00:19.0: setting latency timer to 64 [ 2824.335753] e1000e :00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2824.347221] e1000e :00:19.0: irq 50 for MSI/MSI-X [ 2824.578329] e1000e :00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:67:84:e9 [ 2824.578340] e1000e :00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 2824.578405] e1000e :00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 1000FF-0FF [ 2824.737160] e1000e :00:19.0: irq 50 for MSI/MSI-X [ 2824.840802] e1000e :00:19.0: irq 50 for MSI/MSI-X [ 2824.843896] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2824.845415] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2867.226514] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 2867.226529] e1000e :00:19.0: eth0: 10/100 speed: disabling TSO [ 2867.229384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: nikolaj2516 F pulseaudio /dev/snd/controlC0: nikolaj2516 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xd832 irq 53' Mixer name : 'Conexant CX20590' Components : 'HDA:14f1506e,17aa21cf,0010 HDA:14f12c06,17aa2122,0010' Controls : 20 Simple ctrls : 10 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xd600 irq 17' Mixer name : 'Nvidia GPU 11 HDMI/DP' Components : 'HDA:10de0011,10de0101,00100100' Controls : 24 Simple ctrls : 4 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw unknown' Mixer name : 'ThinkPad EC (unknown)' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0
[Kernel-packages] [Bug 1266186] Re: [HP ChromeBook 14-q030ef] Touchpad not detected after the kernel upgrade
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1266186 Title: [HP ChromeBook 14-q030ef] Touchpad not detected after the kernel upgrade Status in “linux” package in Ubuntu: Expired Bug description: My laptop touchpad stopped working after a kernel upgrade 2 days ago, it worked correctly before that. I didn't find any shortcut to enable/disable it, and since it's a chromebook, it has a coreboot BIOS -> www.coreboot.org . Also, the touchpad works when I boot on ChromeOS. My mouse still works. I use Ubuntu 13.10 with kernel 3.11.0-15-generic. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic 3.11.0-15.23 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: carl 1627 F pulseaudio /dev/snd/controlC1: carl 1627 F pulseaudio Date: Sun Jan 5 12:18:54 2014 MachineType: Hewlett-Packard Falco MarkForUpload: True ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=a6affca5-69c9-46b1-8ae3-dd7062cf4d06 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/18/2013 dmi.bios.vendor: coreboot dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvncoreboot:bvr:bd10/18/2013:svnHewlett-Packard:pnFalco:pvr1.0:cvnHewlett-Packard:ct3:cvr: dmi.product.name: Falco dmi.product.version: 1.0 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1266186/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261129] Re: [Sony VAIO SVF13N1L2ES] keyboard and touchpad do not work after resume from suspend
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261129 Title: [Sony VAIO SVF13N1L2ES] keyboard and touchpad do not work after resume from suspend Status in “linux” package in Ubuntu: Expired Bug description: This has happened for the first time now, all previous cycles had no problems. Will update report with info on frequency of issue. Not working means that laptop shows no response to keypresses or touchpad use. No response to hotkeys either (i.e. Fn-x presses). Volume rocker at the side of the laptop doesn't work either. However, touchscreen and digitizer continue to work. WORKAROUND: A second suspend-resume fixes the issue. I'm attaching a dmesg log from after the second resume. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: daniel 1913 F pulseaudio /dev/snd/controlC0: daniel 1913 F pulseaudio Date: Sun Dec 15 12:29:13 2013 InstallationDate: Installed on 2013-12-13 (1 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: Sony Corporation SVF13N1L2ES MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic.efi.signed root=UUID=cbdfd3fb-5ace-4e58-b7b9-28c13927062b ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-14-generic N/A linux-backports-modules-3.11.0-14-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/25/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0220VA dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0220VA:bd11/25/2013:svnSonyCorporation:pnSVF13N1L2ES:pvrC10JH1TU:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVF13N1L2ES dmi.product.version: C10JH1TU dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261129/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1291113] Re: Intel igb driver infinite loop in ksoftirqd, uses 100% of cpu 0
(Hmm, you're simply tracking 3.2.55, that's how the net_dma commit got into the 3.2.0-60 build. Do we have to wait for 3.2.56 for a fix to be shipped in an Ubuntu build?) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1291113 Title: Intel igb driver infinite loop in ksoftirqd, uses 100% of cpu 0 Status in “linux” package in Ubuntu: Triaged Bug description: This bug is present in 3.11.0-17 and 3.11.0-18: https://lkml.org/lkml/2014/2/19/658 The afflicted network interface's lspci output: 02:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) Subsystem: Super Micro Computer Inc Device 1521 Flags: bus master, fast devsel, latency 0, IRQ 27 Memory at df92 (32-bit, non-prefetchable) [size=128K] I/O ports at 8020 [size=32] Memory at df944000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] MSI-X: Enable+ Count=10 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-xx-xx-xx-xx-xx-xx-xx Capabilities: [150] Alternative Routing-ID Interpretation (ARI) Capabilities: [160] Single Root I/O Virtualization (SR-IOV) Capabilities: [1a0] Transaction Processing Hints Capabilities: [1c0] Latency Tolerance Reporting Capabilities: [1d0] Access Control Services Kernel driver in use: igb Kernel modules: igb [I have masked out the MAC address] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291113/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1291113] Re: Intel igb driver infinite loop in ksoftirqd, uses 100% of cpu 0
Hey, so heads up that this absolutely does affect kernel 3.2.0-60. Per the changelog here: http://changelogs.ubuntu.com/changelogs/pool/main/l/linux/linux_3.2.0-60.91/changelog This commit was added: * net_dma: mark broken - LP: #1281620 According to the commit message for "ioat: fix tasklet tear down" it is that net_dma commit which activates the bug. Please include the necessary fix in 3.2.0-61, or back out the triggering change as needed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1291113 Title: Intel igb driver infinite loop in ksoftirqd, uses 100% of cpu 0 Status in “linux” package in Ubuntu: Triaged Bug description: This bug is present in 3.11.0-17 and 3.11.0-18: https://lkml.org/lkml/2014/2/19/658 The afflicted network interface's lspci output: 02:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) Subsystem: Super Micro Computer Inc Device 1521 Flags: bus master, fast devsel, latency 0, IRQ 27 Memory at df92 (32-bit, non-prefetchable) [size=128K] I/O ports at 8020 [size=32] Memory at df944000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] MSI-X: Enable+ Count=10 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-xx-xx-xx-xx-xx-xx-xx Capabilities: [150] Alternative Routing-ID Interpretation (ARI) Capabilities: [160] Single Root I/O Virtualization (SR-IOV) Capabilities: [1a0] Transaction Processing Hints Capabilities: [1c0] Latency Tolerance Reporting Capabilities: [1d0] Access Control Services Kernel driver in use: igb Kernel modules: igb [I have masked out the MAC address] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291113/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1155169] Re: [HP Pavilion dm3-1109tu Entertainment Notebook PC] Brightness Keys not working after restarting system from Windows 7
Ok I'm done, email has been sent. Hope that I did what is expected. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1155169 Title: [HP Pavilion dm3-1109tu Entertainment Notebook PC] Brightness Keys not working after restarting system from Windows 7 Status in “linux” package in Ubuntu: Triaged Bug description: In Windows 7 when I restart my laptop and boot into Ubuntu, brightness keys don't work. WORKAROUND: I shutdown my laptop then power on again to Ubuntu. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-38.61-generic-pae 3.2.37 Uname: Linux 3.2.0-38-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CheckboxSubmission: 7191766c97add1468cdb96d5e05a7079 CheckboxSystem: b845c366ea09c60efa3a45c1b5b21525 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Thu Mar 14 21:44:57 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-38-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 --- ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 CasperVersion: 1.337 CurrentDesktop: Unity DistUpgraded: Fresh install DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20140208) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC Package: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 PackageArchitecture: i386 ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Tags: trusty ubuntu single-occurrence reproducible Uname: Linux 3.13.0-8-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compi
[Kernel-packages] [Bug 972604] Re: 168c:001c [HP Compaq Presario C700 Notebook PC] Wireless led button doesn't switch colors
I add more info about /sys/class/leds/ and triggers, as I was asked. ls -l /sys/class/leds/ totale 0 lrwxrwxrwx 1 root root 0 mar 15 07:24 ath5k-phy0::rx -> ../../devices/pci:00/:00:1c.0/:01:00.0/leds/ath5k-phy0::rx lrwxrwxrwx 1 root root 0 mar 15 07:11 ath5k-phy0::tx -> ../../devices/pci:00/:00:1c.0/:01:00.0/leds/ath5k-phy0::tx ls -l /sys/class/leds/ath5k-phy0::rx/ totale 0 -rw-r--r-- 1 root root 4096 mar 15 07:28 brightness lrwxrwxrwx 1 root root0 mar 15 07:28 device -> ../../../:01:00.0 -r--r--r-- 1 root root 4096 mar 15 07:28 max_brightness drwxr-xr-x 2 root root0 mar 15 07:28 power lrwxrwxrwx 1 root root0 mar 15 07:11 subsystem -> ../../../../../../class/leds -rw-r--r-- 1 root root 4096 mar 15 07:28 trigger -rw-r--r-- 1 root root 4096 mar 15 07:11 uevent ls -l /sys/class/leds/ath5k-phy0::tx/ totale 0 -rw-r--r-- 1 root root 4096 mar 15 07:29 brightness lrwxrwxrwx 1 root root0 mar 15 07:29 device -> ../../../:01:00.0 -r--r--r-- 1 root root 4096 mar 15 07:29 max_brightness drwxr-xr-x 2 root root0 mar 15 07:29 power lrwxrwxrwx 1 root root0 mar 15 07:11 subsystem -> ../../../../../../class/leds -rw-r--r-- 1 root root 4096 mar 15 07:11 trigger -rw-r--r-- 1 root root 4096 mar 15 07:11 uevent cat /sys/class/leds/ath5k-phy0::rx/trigger none AC-online cpu0 cpu1 BAT0-charging-or-full BAT0-charging BAT0-full BAT0-charging-blink-full-solid rfkill0 rfkill1 [phy0rx] phy0tx phy0assoc phy0radio cat /sys/class/leds/ath5k-phy0::tx/trigger none AC-online cpu0 cpu1 BAT0-charging-or-full BAT0-charging BAT0-full BAT0-charging-blink-full-solid rfkill0 rfkill1 phy0rx [phy0tx] phy0assoc phy0radio After workaround: ls -l /sys/class/leds/ath5k-phy0::rx/ totale 0 -rw-r--r-- 1 root root 4096 mar 15 07:28 brightness lrwxrwxrwx 1 root root0 mar 15 07:28 device -> ../../../:01:00.0 -r--r--r-- 1 root root 4096 mar 15 07:28 max_brightness drwxr-xr-x 2 root root0 mar 15 07:28 power lrwxrwxrwx 1 root root0 mar 15 07:11 subsystem -> ../../../../../../class/leds -rw-r--r-- 1 root root 4096 mar 15 07:41 trigger -rw-r--r-- 1 root root 4096 mar 15 07:11 uevent ls -l /sys/class/leds/ath5k-phy0::tx/ totale 0 -rw-r--r-- 1 root root 4096 mar 15 07:29 brightness lrwxrwxrwx 1 root root0 mar 15 07:29 device -> ../../../:01:00.0 -r--r--r-- 1 root root 4096 mar 15 07:29 max_brightness drwxr-xr-x 2 root root0 mar 15 07:29 power lrwxrwxrwx 1 root root0 mar 15 07:11 subsystem -> ../../../../../../class/leds -rw-r--r-- 1 root root 4096 mar 15 07:41 trigger -rw-r--r-- 1 root root 4096 mar 15 07:11 uevent cat /sys/class/leds/ath5k-phy0::rx/trigger none AC-online cpu0 cpu1 BAT0-charging-or-full BAT0-charging BAT0-full BAT0-charging-blink-full-solid rfkill0 rfkill1 phy0rx phy0tx phy0assoc [phy0radio] cat /sys/class/leds/ath5k-phy0::tx/trigger [none] AC-online cpu0 cpu1 BAT0-charging-or-full BAT0-charging BAT0-full BAT0-charging-blink-full-solid rfkill0 rfkill1 phy0rx phy0tx phy0assoc phy0radio uname -a Linux cristian-Compaq-Presario-C700-Notebook-PC 3.8.0-35-generic #50-Ubuntu SMP Tue Dec 3 01:25:33 UTC 2013 i686 i686 i686 GNU/Linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/972604 Title: 168c:001c [HP Compaq Presario C700 Notebook PC] Wireless led button doesn't switch colors Status in “linux” package in Ubuntu: Triaged Bug description: I'm using Lubuntu 11.10 Oneiric Ocelot. My wifi chip is supported from ath5k drivers. The led button blinks between red and blue light and its pressure does anything. WORKAROUND: I tried to type: echo none > "/sys/class/leds/ath5k-phy0::tx/trigger" echo phy0radio > "/sys/class/leds/ath5k-phy0::rx/trigger" and in this way I can control the color of the LED. But the problem is that the colors are reversed: it should be red for wifi off and blue for wifi on, but it is rather the opposite! ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image-3.0.0-17-generic 3.0.0-17.30 ProcVersionSignature: Ubuntu 3.0.0-17.30-generic 3.0.22 Uname: Linux 3.0.0-17-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: cristian 1872 F pulseaudio CRDA: Error: [Errno 2] File o directory non esistente Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0x9240 irq 42' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,103c30d9,0010' Controls : 15 Simple ctrls : 8 Date: Tue Apr 3 17:37:08 2012 HibernationDevice: RESUME=UUID=3899fff8-34b5-4722-a9f7-44fd70d111c9