[Kernel-packages] [Bug 1525270] Re: 10ec:8192 WiFi Realtek 8192E disconnects after a while and fails to reconnect

2015-12-20 Thread Gilbert Dion
Can you help me please: I can't figure out which mailing list you are
talking about. Where can I find this address, or the addresses of Larry
FInger and the others.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1525270

Title:
  10ec:8192 WiFi Realtek 8192E disconnects after a while and fails to
  reconnect

Status in linux package in Ubuntu:
  Triaged

Bug description:
  A few minutes after booting my Samsung R580 laptop, the Wi-Fi
  disconnects and it fails to reconnect until I restart the machine.
  This happens with all the 64 bit versions of Ubuntu I tried, from
  14.04 to 15.10. With the 32 bit versions, everything runs perfectly.
  No loss of connection at all, even after 48 hours in a row.

  Here is the output of iwconfig after loss of connexion:

  eth7  no wireless extensions.

  lono wireless extensions.

  wlan6 802.11bgn  ESSID:"JeLisVosCourriels"  Nickname:"rtl8192E"
    Mode:Managed  Frequency=2.417 GHz  Access Point: Not-Associated
    Bit Rate:19.5 Mb/s
    Retry min limit:7   RTS thr:off   Fragment thr:off
    Power Management:off
    Link Quality=10/100  Signal level=0 dBm  Noise level=-100 dBm
    Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
    Tx excessive retries:0  Invalid misc:0   Missed beacon:0

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-19-generic 4.2.0-19.23
  ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6
  Uname: Linux 4.2.0-19-generic x86_64
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  gilbert3115 F pulseaudio
   /dev/snd/controlC0:  gilbert3115 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Dec 11 09:27:18 2015
  HibernationDevice: RESUME=UUID=e19f92d5-541f-412f-b5b0-7d97bfa1b7ec
  InstallationDate: Installed on 2015-12-03 (7 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. R580
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic 
root=UUID=f6b1d099-6ed1-4e82-823a-352535c7596c ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-19-generic N/A
   linux-backports-modules-4.2.0-19-generic  N/A
   linux-firmware1.149.3
  SourcePackage: linux
  UpgradeStatus: Upgraded to wily on 2015-12-03 (7 days ago)
  dmi.bios.date: 12/21/2009
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: 04JB.M014.20091221.hkk
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: R580
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvr04JB.M014.20091221.hkk:bd12/21/2009:svnSAMSUNGELECTRONICSCO.,LTD.:pnR580:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnR580:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A:
  dmi.product.name: R580
  dmi.product.version: Not Applicable
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1525270/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1514233] Re: Ubuntu 15.10 freezes during operation.

2015-12-20 Thread Christopher M. Penalver
GPdM, the next step is to fully commit bisect from kernel 3.19 to 4.2 in
order to identify the last good kernel commit, followed immediately by
the first bad one. This will allow for a more expedited analysis of the
root cause of your issue. Could you please do this following
https://wiki.ubuntu.com/Kernel/KernelBisection ?

Please note, finding adjacent kernel versions is not fully commit
bisecting.

Thank you for your understanding.

Helpful bug reporting tips:
https://wiki.ubuntu.com/ReportingBugs

** Tags removed: kernel-bug-exists-upstream-4.3
** Tags added: kernel-bug-exists-upstream-4.4-rc3

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1514233

Title:
  Ubuntu 15.10 freezes during operation.

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Ubuntu freezes during video playback operation when window opened
  MAXIMISED. The freeze occurs with Firefox 42.0, VideoLAN or Totem
  Movie Player, DOES NOT occur if window playing video is resized to
  anything but maximised. It just freezes occasionally since upgrade.
  Upgrade to wild wily.

  ---
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  piero  3117 F pulseaudio
  DistroRelease: Ubuntu 15.10
  HibernationDevice: RESUME=UUID=a8107c7e-93b2-48d0-b4a9-bb91c76fea50
  InstallationDate: Installed on 2015-09-01 (72 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  MachineType: Hewlett-Packard HP 14 Notebook PC
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic.efi.signed 
root=UUID=e343fb82-8a28-4aa7-b323-c560226e41b5 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-18-generic N/A
   linux-backports-modules-4.2.0-18-generic  N/A
   linux-firmware1.149.1
  Tags:  wily
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  Uname: Linux 4.2.0-18-generic x86_64
  UpgradeStatus: Upgraded to wily on 2015-11-06 (6 days ago)
  UserGroups:

  _MarkForUpload: True
  dmi.bios.date: 10/28/2014
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.32
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 220F
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 57.47
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.32:bd10/28/2014:svnHewlett-Packard:pnHP14NotebookPC:pvr097412405F0620180:rvnHewlett-Packard:rn220F:rvr57.47:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP 14 Notebook PC
  dmi.product.version: 097412405F0620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514233/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1525270] Re: 10ec:8192 WiFi Realtek 8192E disconnects after a while and fails to reconnect

2015-12-20 Thread Gilbert Dion
ok, I found this:

RTL8192CE WIRELESS DRIVER
M:  Larry Finger 
M:  Chaoming Li 
L:  linux-wirel...@vger.kernel.org
W:  http://wireless.kernel.org/
T:  git 
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S:  Maintained
F:  drivers/net/wireless/rtlwifi/
F:  drivers/net/wireless/rtlwifi/rtl8192ce/

but there is no "Realtek WlanFAE".

I'll send my report Tuesday or https://bugs.launchpad.net/bugs/1525270

Title:
  10ec:8192 WiFi Realtek 8192E disconnects after a while and fails to
  reconnect

Status in linux package in Ubuntu:
  Triaged

Bug description:
  A few minutes after booting my Samsung R580 laptop, the Wi-Fi
  disconnects and it fails to reconnect until I restart the machine.
  This happens with all the 64 bit versions of Ubuntu I tried, from
  14.04 to 15.10. With the 32 bit versions, everything runs perfectly.
  No loss of connection at all, even after 48 hours in a row.

  Here is the output of iwconfig after loss of connexion:

  eth7  no wireless extensions.

  lono wireless extensions.

  wlan6 802.11bgn  ESSID:"JeLisVosCourriels"  Nickname:"rtl8192E"
    Mode:Managed  Frequency=2.417 GHz  Access Point: Not-Associated
    Bit Rate:19.5 Mb/s
    Retry min limit:7   RTS thr:off   Fragment thr:off
    Power Management:off
    Link Quality=10/100  Signal level=0 dBm  Noise level=-100 dBm
    Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
    Tx excessive retries:0  Invalid misc:0   Missed beacon:0

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-19-generic 4.2.0-19.23
  ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6
  Uname: Linux 4.2.0-19-generic x86_64
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  gilbert3115 F pulseaudio
   /dev/snd/controlC0:  gilbert3115 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Dec 11 09:27:18 2015
  HibernationDevice: RESUME=UUID=e19f92d5-541f-412f-b5b0-7d97bfa1b7ec
  InstallationDate: Installed on 2015-12-03 (7 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. R580
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic 
root=UUID=f6b1d099-6ed1-4e82-823a-352535c7596c ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-19-generic N/A
   linux-backports-modules-4.2.0-19-generic  N/A
   linux-firmware1.149.3
  SourcePackage: linux
  UpgradeStatus: Upgraded to wily on 2015-12-03 (7 days ago)
  dmi.bios.date: 12/21/2009
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: 04JB.M014.20091221.hkk
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: R580
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvr04JB.M014.20091221.hkk:bd12/21/2009:svnSAMSUNGELECTRONICSCO.,LTD.:pnR580:pvrNotApplicable:rvnSAMSUNGELECTRONICSCO.,LTD.:rnR580:rvrNotApplicable:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A:
  dmi.product.name: R580
  dmi.product.version: Not Applicable
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1525270/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1514233] Re: Ubuntu 15.10 freezes during operation.

2015-12-20 Thread GPdM
Got another freeze at 23:59 Sun 22.09.2015

$ date
Mo 21. Dez 00:04:24 CET 2015
$ uname -a
Linux bianco 4.4.0-040400rc3-generic #201511300321 SMP Mon Nov 30 03:23:36 UTC 
2015 x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1514233

Title:
  Ubuntu 15.10 freezes during operation.

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Ubuntu freezes during video playback operation when window opened
  MAXIMISED. The freeze occurs with Firefox 42.0, VideoLAN or Totem
  Movie Player, DOES NOT occur if window playing video is resized to
  anything but maximised. It just freezes occasionally since upgrade.
  Upgrade to wild wily.

  ---
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  piero  3117 F pulseaudio
  DistroRelease: Ubuntu 15.10
  HibernationDevice: RESUME=UUID=a8107c7e-93b2-48d0-b4a9-bb91c76fea50
  InstallationDate: Installed on 2015-09-01 (72 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  MachineType: Hewlett-Packard HP 14 Notebook PC
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic.efi.signed 
root=UUID=e343fb82-8a28-4aa7-b323-c560226e41b5 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-18-generic N/A
   linux-backports-modules-4.2.0-18-generic  N/A
   linux-firmware1.149.1
  Tags:  wily
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  Uname: Linux 4.2.0-18-generic x86_64
  UpgradeStatus: Upgraded to wily on 2015-11-06 (6 days ago)
  UserGroups:

  _MarkForUpload: True
  dmi.bios.date: 10/28/2014
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.32
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 220F
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 57.47
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.32:bd10/28/2014:svnHewlett-Packard:pnHP14NotebookPC:pvr097412405F0620180:rvnHewlett-Packard:rn220F:rvr57.47:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP 14 Notebook PC
  dmi.product.version: 097412405F0620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1514233/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1516215] Re: kernel 4.x has issues with lite-on sata controller in dell xps 13 (2015)

2015-12-20 Thread Christopher M. Penalver
Carolin Latze, it's best to continue testing the latest mainline kernel
(now 4.4-rc5) as they come out, in order to quickly identify a candidate
for backporting. Could you please test this and advise to the results?

** Changed in: linux (Ubuntu)
   Status: Triaged => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1516215

Title:
   kernel 4.x has issues with lite-on sata controller in dell xps 13
  (2015)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I have a Dell XPS 13 (2015) which has a Lite-On Sata controller:
  03:00.0 SATA controller: Lite-On Technology Corporation Device 0224 (rev 10)

  Right from the beginning, I have issues with that one under Linux (not
  Windows). It might happen that the notebook just dies (loosing its
  SSD), or it might not even boot. Whenever it does not boot, it usually
  stops with a message around "job 1 of 12 ..." (I don't find them in
  any logs ). Sometimes when I boot into Windows and then immediately
  reboot into Linux it works. It usually helps to boot a 3.19.x kernel,
  although even that one can have the same issues (although way less
  than 4.x).

  The system almost always crashes completely when I run the dump tool.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-18-generic 4.2.0-18.22
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  latze  1599 F pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Nov 14 09:29:04 2015
  HibernationDevice: RESUME=UUID=b8662265-a1f0-487e-9d85-2731c765b3eb
  InstallationDate: Installed on 2015-08-23 (82 days ago)
  InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0bda:5682 Realtek Semiconductor Corp.
   Bus 001 Device 003: ID 04f3:20d0 Elan Microelectronics Corp.
   Bus 001 Device 002: ID 8087:0a2a Intel Corp.
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Dell Inc. XPS 13 9343
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic.efi.signed 
root=UUID=9e67912b-c59e-47ac-b2f1-3ef39e3d38fb ro debug
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-18-generic N/A
   linux-backports-modules-4.2.0-18-generic  N/A
   linux-firmware1.149.1
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: Upgraded to wily on 2015-10-31 (13 days ago)
  dmi.bios.date: 07/14/2015
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A05
  dmi.board.name: 0310JH
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd07/14/2015:svnDellInc.:pnXPS139343:pvr:rvnDellInc.:rn0310JH:rvrA00:cvnDellInc.:ct9:cvr:
  dmi.product.name: XPS 13 9343
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1516215/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1520040] Re: [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!

2015-12-20 Thread Christopher M. Penalver
Yuri Ribeiro Sucupira, the list is correct.

** This bug is no longer a duplicate of bug 1488719
   dmesg shows "[drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!"

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1520040

Title:
  [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt
  lied (SDE)!

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Device: notebook Dell Inspiron 5548

  Operating system: 64-bit XUbuntu Linux 14.04 LTS

  Processor: Intel Core i7-5500U

  Kernel: 3.19.0-33-generic #38~14.04.1-Ubuntu SMP x86_64

  Video: dual chip. These are the two display controllers:
  - Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260] display 
controller 3300Hz (requires kernel module / device driver "fglrx"); and
  - Intel Corporation Broadwell-U Integrated Graphics VGA compatible controller 
3300Hz (requires kernel module / device driver "i915").

  Problem: my notebook's operating system is switching to runlevel 0
  (power off) randomly, subtly and thus unexpectedly. And if I 'cat
  /var/log/kern.log |grep -i i915' I get a lot of "[drm:gen8_irq_handler
  [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!"
  messages. I'm under the impression that either the kernel or the
  kernel module "i915_bpo" is buggy.

  My notebook's problem can't be related to overheating, because it's a
  brand-new notebook (less than 1 month old) and I've already monitored
  its temperature parameters: nothing abnormal is happening. Also, I'm
  using a cooling laptop base/pad.

  Other kernels I've tested, with which the same issue happens:
  - 3.19.0-18-generic (kernel module: i915_bpo)
  - 3.19.0-23-generic (kernel module: i915_bpo)
  - 3.19.0-28-generic (kernel module: i915_bpo)
  - 4.2.0-18-generic (kernel module: i915)

  Temporary workaround: I downgraded to kernel "3.13.0-36-generic",
  which isn't buggy with its "i915_bdw.ko" (version 3.0) kernel object
  (module). Full path for this module:
  /lib/modules/3.13.0-36-generic/kernel/ubuntu/i915/i915_bdw.ko

  Notes:
  - "bdw" stands for "Broadwell"
  - "bpo", I believe, stands for "backport"

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.19.0-33-generic 3.19.0-33.38~14.04.1
  ProcVersionSignature: Ubuntu 3.19.0-33.38~14.04.1-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-33-generic x86_64
  NonfreeKernelModules: wl fglrx
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Wed Nov 25 23:44:39 2015
  InstallationDate: Installed on 2015-11-03 (22 days ago)
  InstallationMedia: Xubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  SourcePackage: linux-lts-vivid
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  yuriyrs2832 F pulseaudio
   /dev/snd/controlC1:  yuriyrs2832 F pulseaudio
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=a08f36f9-0611-4894-9da9-8b1dcc960a86
  InstallationDate: Installed on 2015-11-03 (24 days ago)
  InstallationMedia: Xubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  MachineType: Dell Inc. Inspiron 5548
  NonfreeKernelModules: fglrx wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-33-generic.efi.signed 
root=UUID=4f05c2b3-c971-4bf8-bcb6-a76d60b68e45 ro quiet splash 
video.use_native_backlight=1 intremap=no_x2apic_optout vt.handoff=7
  ProcVersionSignature: Ubuntu 3.19.0-33.38~14.04.1-generic 3.19.8-ckt7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-33-generic N/A
   linux-backports-modules-3.19.0-33-generic  N/A
   linux-firmware 1.127.18
  Tags:  trusty
  Uname: Linux 3.19.0-33-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse lpadmin netdev 
plugdev sambashare scanner sudo tape video
  _MarkForUpload: True
  dmi.bios.date: 10/12/2015
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A06
  dmi.board.name: 0YDTG3
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A02
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: A06
  dmi.modalias: 
dmi:bvnDellInc.:bvrA06:bd10/12/2015:svnDellInc.:pnInspiron5548:pvrA06:rvnDellInc.:rn0YDTG3:rvrA02:cvnDellInc.:ct8:cvrA06:
  dmi.product.name: Inspiron 5548
  dmi.product.version: A06
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520040/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : 

[Kernel-packages] [Bug 1528038] Re: package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status

2015-12-20 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux-lts-utopic (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1528038

Title:
  package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1
  failed to install/upgrade: subprocess installed post-installation
  script returned error exit status 1

Status in linux-lts-utopic package in Ubuntu:
  Confirmed

Bug description:
  error reports image is from unknown source

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1
  ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20
  Uname: Linux 3.16.0-57-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  Date: Sat Dec 19 14:40:30 2015
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  InstallationDate: Installed on 2015-04-05 (259 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: linux-lts-utopic
  Title: package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1 
failed to install/upgrade: subprocess installed post-installation script 
returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1528038/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

2015-12-20 Thread Martín Coll
@adamrehal

1. download the three deb packages that correspond to your architecture (the 
*all* package, then *most commonly* the generic+amd64 ones)
2. open a terminal and cd to the Downloads folder
3. install the packages with dpkg (e.g. sudo dpkg -i *-4.4.0-040400rc5*.deb)
4. restart and make sure that you're using the new kernel (it's probably using 
it by default, else check your bootloader config)

by the way, can anyone else confirm?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Lenovo U31-70
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527904] Re: package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status

2015-12-20 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux-lts-vivid (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-vivid in Ubuntu.
https://bugs.launchpad.net/bugs/1527904

Title:
  package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1
  failed to install/upgrade: subprocess installed post-installation
  script returned error exit status 1

Status in linux-lts-vivid package in Ubuntu:
  Confirmed

Bug description:
  jason@Jupiter:~$ lsb_release -rd
  Description:  Ubuntu 14.04.3 LTS
  Release:  14.04

  jason@Jupiter:~$ apt-cache policy  linux-image-extra-3.19.0-42-generic
  linux-image-extra-3.19.0-42-generic:
Installed: 3.19.0-42.48~14.04.1
Candidate: 3.19.0-42.48~14.04.1
Version table:
   *** 3.19.0-42.48~14.04.1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1
  ProcVersionSignature: Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-32-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  Date: Sat Dec 19 08:03:59 2015
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  InstallationDate: Installed on 2015-09-04 (106 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: linux-lts-vivid
  Title: package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1 
failed to install/upgrade: subprocess installed post-installation script 
returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-vivid/+bug/1527904/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


Re: [Kernel-packages] [Bug 1482435] Re: Wi-Fi not working after Sleep

2015-12-20 Thread Gilbert Dion
I am sorry, I have no longer access to the computer on which this happened.
It belonged to a friend of a friend of mine and now the guy got back home
with it. He lives in another city. I can't even remember his name. Too bad!


Gilbert Dion

g

2015-12-19 13:20 GMT-05:00 Christopher M. Penalver <
christopher.m.penal...@gmail.com>:

> Gilbert Dion, thank you for taking the time to report this bug and helping
> to make Ubuntu better. Please execute the following command only once, as
> it will automatically gather debugging information, in a terminal:
> apport-collect 1482435
>
> ** Package changed: linux-lts-utopic (Ubuntu) => linux (Ubuntu)
>
> ** Changed in: linux (Ubuntu)
>Importance: Undecided => Low
>
> ** Changed in: linux (Ubuntu)
>Status: New => Incomplete
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1482435
>
> Title:
>   Wi-Fi not working after Sleep
>
> Status in linux package in Ubuntu:
>   Incomplete
>
> Bug description:
>   After sleep mode, the Wi-Fi chip is not recognized by the kernel
>   module and therefore is not available. It is recognized after a reboot
>   or after hibernating though.
>
>   I have tried a lot of possibilities. Someone suggested the following
> command:
>   sudo nmcli nm sleep false
>   But it does nothing.
>
>   This has nothing to do with the hardware Wi-Fi switch. I know its
>   purpose and tried switching on and off.
>
>   Also, the output of the command nmcli nm, nmcli c and nmcli d after
>   coming back from sleep mode is showed below. Notice nmcli d shows no
>   wlan1 device (which is how my wireless device is identified normally).
>
>   mario@mario-Compaq-Presario-laptop:~$ nmcli nm
>   ÉTAT FONCT. ÉTATMATÉRIEL-WIFI   WIFI
>  MATÉRIEL-WWAN   WWAN
>   actif   connectéactivé  activé activé
>   activé
>
>   mario@mario-Compaq-Presario-laptop:~$ nmcli c
>   NOM   UUID   TYPE
>   TIMESTAMP-REAL
>   Connexion filaire 1   cdf0b2eb-484c-4cb9-85fe-ca2d4b717505
>  802-3-ethernetmar 04 aoû 2015 23:06:56 EDT
>   JeLisVosCourriels dcefe472-5b7b-4ae5-9066-0acdf1aec24b
>  802-11-wireless   mar 04 aoû 2015 22:57:57 EDT
>
>   mario@mario-Compaq-Presario-laptop:~$ nmcli d
>   PÉRIPHÉRIQUE TYPE  ÉTAT
>   eth1   802-3-ethernetconnecté
>
>   Last but not least, the output of dmesg | grep iwl  (after sleep) is
>   [  693.890526] iwl3945 :01:00.0: bad EEPROM
> signature,EEPROM_GP=0x0007
>   [  693.890532] iwl3945 :01:00.0: EEPROM not found,
> EEPROM_GP=0x
>   [  693.890563] iwl3945 :01:00.0: Unable to init EEPROM
>   [  693.890713] iwl3945: probe of :01:00.0 failed with error -2
>
>   And I think this tells it all.
>
>   Ubuntu release 14.04 Ubuntu 14.04.2 LTS
>   Wi-Fi chip is Intel 3945ABG and module is iwl3945.
>
>   ProblemType: Bug
>   DistroRelease: Ubuntu 14.04
>   Package: linux-image-3.16.0-45-generic 3.16.0-45.60~14.04.1
>   ProcVersionSignature: Ubuntu 3.16.0-45.60~14.04.1-generic 3.16.7-ckt14
>   Uname: Linux 3.16.0-45-generic x86_64
>   NonfreeKernelModules: wl
>   ApportVersion: 2.14.1-0ubuntu3.11
>   Architecture: amd64
>   CurrentDesktop: Unity
>   Date: Thu Aug  6 19:49:20 2015
>   InstallationDate: Installed on 2015-07-25 (12 days ago)
>   InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64
> (20150218.1)
>   SourcePackage: linux-lts-utopic
>   UpgradeStatus: No upgrade log present (probably fresh install)
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1482435/+subscriptions
>

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1482435

Title:
  Wi-Fi not working after Sleep

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  After sleep mode, the Wi-Fi chip is not recognized by the kernel
  module and therefore is not available. It is recognized after a reboot
  or after hibernating though.

  I have tried a lot of possibilities. Someone suggested the following command:
  sudo nmcli nm sleep false
  But it does nothing.

  This has nothing to do with the hardware Wi-Fi switch. I know its
  purpose and tried switching on and off.

  Also, the output of the command nmcli nm, nmcli c and nmcli d after
  coming back from sleep mode is showed below. Notice nmcli d shows no
  wlan1 device (which is how my wireless device is identified normally).

  mario@mario-Compaq-Presario-laptop:~$ nmcli nm
  ÉTAT FONCT. ÉTATMATÉRIEL-WIFI   WIFI   MATÉRIEL-WWAN   
WWAN  
  actif   connectéactivé  activé activé  
activé

  mario@mario-Compaq-Presario-laptop:~$ nmcli c
  NOM   UUID   TYPE 
 TIMESTAMP-REAL   

[Kernel-packages] [Bug 1492146] Re: igb Detected Tx Unit Hang

2015-12-20 Thread Mark Sapiro
My server has now been running on this kernel (3.16.0-56-generic) for
over 48 hours with no recurrence of the igb Tx Unit Hang.

I think we can say it's working for me.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1492146

Title:
  igb Detected Tx Unit Hang

Status in linux-lts-utopic package in Ubuntu:
  Confirmed
Status in linux-lts-utopic source package in Trusty:
  Fix Released

Bug description:
  Hello!

  Have a:

  >lsb_release -a
  No LSB modules are available.
  Distributor ID: Ubuntu
  Description:Ubuntu 14.04.3 LTS
  Release:14.04
  Codename:   trusty

  with kenel 3.16.0-46-generic.

  Today i do dist-upgrade and kernel was upgraded to 3.16.0-48-generic
  version.

  After reboot i've got this:

  Sep  4 09:02:52 mail kernel: [  310.616324] igb :02:00.0 em1: Reset 
adapter Sep  4 09:02:52 mail kernel: [  310.831157] igb :02:00.1 em2: Reset 
adapter Sep  4 09:02:56 mail kernel: [  315.154686] igb :02:00.0 em1: igb: 
em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Sep  4 09:02:56 mail 
kernel: [  315.202651] igb :02:00.1 em2: igb: em2 NIC Link is Up 1000 Mbps 
Full Duplex, Flow Control: RX Sep  4 09:03:02 mail kernel: [  321.608099] igb 
:02:00.0: Detected Tx Unit Hang
  Sep  4 09:03:02 mail kernel: [  321.608099]   Tx Queue <6>
  Sep  4 09:03:02 mail kernel: [  321.608099]   TDH  <23>
  Sep  4 09:03:02 mail kernel: [  321.608099]   TDT  <23>
  Sep  4 09:03:02 mail kernel: [  321.608099]   next_to_use  <25>
  Sep  4 09:03:02 mail kernel: [  321.608099]   next_to_clean<23>
  Sep  4 09:03:02 mail kernel: [  321.608099] buffer_info[next_to_clean]
  Sep  4 09:03:02 mail kernel: [  321.608099]   time_stamp   <112af>
  Sep  4 09:03:02 mail kernel: [  321.608099]   next_to_watch

  Sep  4 09:03:02 mail kernel: [  321.608099]   jiffies  <11531>
  Sep  4 09:03:02 mail kernel: [  321.608099]   desc.status  <120200>
  Sep  4 09:03:04 mail kernel: [  323.607349] igb :02:00.0: Detected Tx 
Unit Hang
  Sep  4 09:03:04 mail kernel: [  323.607349]   Tx Queue <6>
  Sep  4 09:03:04 mail kernel: [  323.607349]   TDH  <23>
  Sep  4 09:03:04 mail kernel: [  323.607349]   TDT  <23>
  Sep  4 09:03:04 mail kernel: [  323.607349]   next_to_use  <25>
  Sep  4 09:03:04 mail kernel: [  323.607349]   next_to_clean<23>
  Sep  4 09:03:04 mail kernel: [  323.607349] buffer_info[next_to_clean]
  Sep  4 09:03:04 mail kernel: [  323.607349]   time_stamp   <112af>
  Sep  4 09:03:04 mail kernel: [  323.607349]   next_to_watch

  Sep  4 09:03:04 mail kernel: [  323.607349]   jiffies  <11725>
  Sep  4 09:03:04 mail kernel: [  323.607349]   desc.status  <120200>
  Sep  4 09:03:06 mail kernel: [  325.606602] igb :02:00.0: Detected Tx 
Unit Hang
  Sep  4 09:03:06 mail kernel: [  325.606602]   Tx Queue <6>
  Sep  4 09:03:06 mail kernel: [  325.606602]   TDH  <23>
  Sep  4 09:03:06 mail kernel: [  325.606602]   TDT  <23>
  Sep  4 09:03:06 mail kernel: [  325.606602]   next_to_use  <25>
  Sep  4 09:03:06 mail kernel: [  325.606602]   next_to_clean<23>
  Sep  4 09:03:06 mail kernel: [  325.606602] buffer_info[next_to_clean]
  Sep  4 09:03:06 mail kernel: [  325.606602]   time_stamp   <112af>
  Sep  4 09:03:06 mail kernel: [  325.606602]   next_to_watch

  Sep  4 09:03:06 mail kernel: [  325.606602]   jiffies  <11919>
  Sep  4 09:03:06 mail kernel: [  325.606602]   desc.status  <120200>

  All network connections droped after that. System still unusable.

  Only after boot with old linux-image-3.16.0-46-generic my production
  mail server can work.

  It's a critical bug for me, can anybody help me?

  ethtool -i em1
  driver: igb
  version: 5.2.13-k
  firmware-version: 1.61, 0x8cd5, 1.949.0
  bus-info: :02:00.0
  supports-statistics: yes
  supports-test: yes
  supports-eeprom-access: yes
  supports-register-dump: yes
  supports-priv-flags: no

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1492146/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1436940] Re: Atheros wifi 168c:0041(QCA6164) is not supported

2015-12-20 Thread kartikhegde
Hi,

I am using Lenovo g50-80 model.  I have ath10k-QCA988X card (Most of
them here have QCA6164. Not sure if same procedure can be used for
QCA988X also ?). I am unable to access WiFi network with any of the
versions of the Ubuntu. Can someone please help me ?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1436940

Title:
  Atheros wifi 168c:0041(QCA6164) is not supported

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  The atheros wireless device (168c:0041) isn't supported by the
  ath10k_pci kernel driver.

  Found in several laptop models:

  Lenovo Z70
  Lenovo G50-45
  Lenovo G50-80
  Lenovo Edge 15
  Lenovo Yoga 3 11
  Lenovo Flex 3-1470
  Lenovo U31-70
  Samsung ATIV Book 9 NP930X2K

  ProblemType: BugDistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-9-generic 3.19.0-9.9
  ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1
  Uname: Linux 3.19.0-9-generic x86_64
  ApportVersion: 2.16.2-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  nicholas   1695 F pulseaudio
   /dev/snd/controlC1:  nicholas   1695 F pulseaudio
  CurrentDesktop: Unity
  Date: Thu Mar 26 09:47:16 2015
  HibernationDevice: RESUME=UUID=5b068cd8-e60a-49b9-a88e-1581bb6b3dc1
  InstallationDate: Installed on 2015-03-25 (1 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
   Bus 001 Device 003: ID 5986:0652 Acer, Inc
   Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card 
Reader Controller
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 80E5
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-9-generic 
root=UUID=e52867c5-0b50-42fb-8288-f30765f926c5 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-9-generic N/A
   linux-backports-modules-3.19.0-9-generic  N/A
   linux-firmware1.143SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-03-26 (0 days ago)
  dmi.bios.date: 06/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: B0CN69WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Lenovo G50-80
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G50-80
  dmi.modalias: 
dmi:bvnLENOVO:bvrB0CN69WW:bd06/20/2014:svnLENOVO:pn80E5:pvrLenovoG50-80:rvnLENOVO:rnLenovoG50-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoG50-80:
  dmi.product.name: 80E5
  dmi.product.version: Lenovo G50-80
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1479627] Re: X boots to black screen with cursor

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1479627

Title:
  X boots to black screen with cursor

Status in linux package in Ubuntu:
  Expired

Bug description:
  Unable to use computer when I try booting with monitors connected to
  it. dmesg indicates that nouveau is crashing. This was not an issue on
  ubuntu 14.10.

  ---
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  CurrentDesktop: KDE
  DistUpgraded: 2015-07-19 13:17:36,647 DEBUG enabling apt cron job
  DistroCodename: vivid
  DistroRelease: Ubuntu 15.04
  DistroVariant: kubuntu
  GraphicsCard:
   Intel Corporation 4th Gen Core Processor Integrated Graphics Controller 
[8086:0416] (rev 06) (prog-if 00 [VGA controller])
     Subsystem: Lenovo Device [17aa:221d]
   NVIDIA Corporation GK208M [GeForce GT 730M] [10de:1290] (rev a1) (prog-if 00 
[VGA controller])
     Subsystem: Lenovo Device [17aa:221d]
  InstallationDate: Installed on 2014-03-16 (583 days ago)
  InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 
(20131016.1)
  LightdmGreeterLogOld:
   QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such 
file or directory
   QFileSystemWatcher: failed to add paths: /var/lib/lightdm/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address.
   IBusInputContext::createInputContext: no connection to ibus-daemon
   file:///usr/share/kde4/apps/lightdm-kde-greeter/themes/userbar/main.qml:135: 
Unable to assign [undefined] to QString usersession
  MachineType: LENOVO 20ANCTO1WW
  Package: xorg 1:7.7+7ubuntu4
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-28-generic 
root=/dev/mapper/kubuntu--vg-root ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-28.30-generic 3.19.8-ckt5
  Tags:  vivid kubuntu
  Uname: Linux 3.19.0-28-generic x86_64
  UpgradeStatus: Upgraded to vivid on 2015-07-19 (93 days ago)
  UserGroups: adm cdrom dip fuse libvirtd lpadmin plugdev sambashare sudo
  XorgLogOld:

  _MarkForUpload: True
  dmi.bios.date: 09/10/2015
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GLET81WW (2.35 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20ANCTO1WW
  dmi.board.vendor: LENOVO
  dmi.board.version: 0B98401 PRO
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGLET81WW(2.35):bd09/10/2015:svnLENOVO:pn20ANCTO1WW:pvrThinkPadT440p:rvnLENOVO:rn20ANCTO1WW:rvr0B98401PRO:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 20ANCTO1WW
  dmi.product.version: ThinkPad T440p
  dmi.sys.vendor: LENOVO
  version.compiz: compiz N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.9-2ubuntu1~vivid2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.9-2ubuntu1~vivid2
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917-1~exp1ubuntu2.2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
  xserver.bootTime: Tue Oct 20 13:27:02 2015
  xserver.configfile: default
  xserver.errors:

  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.17.1-0ubuntu3.1
  xserver.video_driver: intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1479627/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1507868] Re: No external USB with Linux 3.19.0-30-generic

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1507868

Title:
  No external USB with Linux 3.19.0-30-generic

Status in linux package in Ubuntu:
  Expired

Bug description:
  Neither my external USB keyboard nor mouse work with Linux
  3.19.0-30-generic at very low levels. (cannot even enter password when
  requested by HD decryption stage in boot up).

  Linux 3.19.0-28-generic continues to work fine.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-30-generic 3.19.0-30.34
  ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6
  Uname: Linux 3.19.0-30-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  CurrentDesktop: KDE
  Date: Mon Oct 19 22:02:12 2015
  HibernationDevice: RESUME=UUID=34a00d95-fa75-4e77-a45c-cde28a838d0b
  InstallationDate: Installed on 2014-03-16 (583 days ago)
  InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 
(20131016.1)
  MachineType: LENOVO 20ANCTO1WW
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic 
root=/dev/mapper/kubuntu--vg-root ro quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-30-generic N/A
   linux-backports-modules-3.19.0-30-generic  N/A
   linux-firmware 1.143.3
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: Upgraded to vivid on 2015-07-19 (92 days ago)
  dmi.bios.date: 09/10/2015
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GLET81WW (2.35 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20ANCTO1WW
  dmi.board.vendor: LENOVO
  dmi.board.version: 0B98401 PRO
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGLET81WW(2.35):bd09/10/2015:svnLENOVO:pn20ANCTO1WW:pvrThinkPadT440p:rvnLENOVO:rn20ANCTO1WW:rvr0B98401PRO:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 20ANCTO1WW
  dmi.product.version: ThinkPad T440p
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507868/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1507367] Re: olympus digital camera no longer recognized

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1507367

Title:
  olympus digital camera no longer recognized

Status in linux package in Ubuntu:
  Expired

Bug description:
  always worked up til last time used,a few days ago

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-65-generic 3.13.0-65.106
  ProcVersionSignature: Ubuntu 3.13.0-65.106-generic 3.13.11-ckt26
  Uname: Linux 3.13.0-65-generic i686
  ApportVersion: 2.14.1-0ubuntu3.15
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  steve  1644 F pulseaudio
  CurrentDesktop: Unity
  Date: Sun Oct 18 12:07:07 2015
  HibernationDevice: RESUME=UUID=e4270e75-2f1c-4349-83f3-311b0616dc34
  InstallationDate: Installed on 2013-01-03 (1018 days ago)
  InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release i386 
(20120817.3)
  IwConfig:
   lono wireless extensions.
   
   eth1  no wireless extensions.
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-65-generic 
root=UUID=b58e67bb-8407-411b-90a8-cec5b94ead62 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-65-generic N/A
   linux-backports-modules-3.13.0-65-generic  N/A
   linux-firmware 1.127.15
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: Upgraded to trusty on 2014-06-06 (499 days ago)
  dmi.bios.date: 07/31/2008
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: LF94510J.86A.0099.2008.0731.0303
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: D945GCLF2
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE46416-101
  dmi.chassis.type: 3
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrLF94510J.86A.0099.2008.0731.0303:bd07/31/2008:svn:pn:pvr:rvnIntelCorporation:rnD945GCLF2:rvrAAE46416-101:cvn:ct3:cvr:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507367/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527096] Re: System locks up when Inserting a SD card on a baytrail platform

2015-12-20 Thread Hui Wang
** Changed in: hwe-next
 Assignee: (unassigned) => Hui Wang (hui.wang)

** Changed in: hwe-next
   Status: New => Fix Released

** Changed in: linux (Ubuntu)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527096

Title:
  System locks up when Inserting a SD card on a baytrail platform

Status in HWE Next:
  Fix Released
Status in linux package in Ubuntu:
  Fix Released

Bug description:
  [Summary] System hangs when Inserting a SD card

  [Reproduce Steps]
  1. Boot into system
  2. Insert a micro SD card into the card reader.

  [Results]
  Expected: card can be correctly detected.
  Actual: system locks up completely.

  [Additional Information]
  CID: xxx
  Base Image: Ubuntu 15.10 desktop
  Product Name: Acer CPF
  BIOS Version: v0.06
  Kernel Version: 4.2.x
  CPU: Intel CHT x5-z8300
  GPU: Integrated

  This is an issue with (high) fail rate.

  This bug is used for tracking only, please do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1527096/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1508397] Re: package linux-image-extra-3.19.0-18-generic 3.19.0-18.18 failed to install/upgrade: package linux-image-extra-3.19.0-18-generic is not ready for configuration canno

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1508397

Title:
  package linux-image-extra-3.19.0-18-generic 3.19.0-18.18 failed to
  install/upgrade: package linux-image-extra-3.19.0-18-generic is not
  ready for configuration  cannot configure (current status `half-
  installed')

Status in linux package in Ubuntu:
  Expired

Bug description:
  I can't  conclude the updates.

  ProblemType: Package
  DistroRelease: Ubuntu 15.04
  Package: linux-image-extra-3.19.0-18-generic 3.19.0-18.18
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic i686
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  jorge  1557 F pulseaudio
  Date: Wed Oct 21 10:47:56 2015
  DpkgHistoryLog:
   Start-Date: 2015-10-21  10:47:07
   Upgrade: tzdata:i386 (2015f-0ubuntu0.15.04, 2015g-0ubuntu0.15.04), 
adobe-flash-properties-gtk:i386 (20151013.1-0vivid1, 20151016.2-0vivid1), 
liboxideqt-qmlplugin:i386 (1.9.5-0ubuntu0.15.04.1, 1.10.3-0ubuntu0.15.04.1), 
libminiupnpc10:i386 (1.9.20140610-2ubuntu1, 1.9.20140610-2ubuntu1.1), 
oxideqt-codecs-extra:i386 (1.9.5-0ubuntu0.15.04.1, 1.10.3-0ubuntu0.15.04.1), 
adobe-flashplugin:i386 (20151013.1-0vivid1, 20151016.2-0vivid1), 
tzdata-java:i386 (2015f-0ubuntu0.15.04, 2015g-0ubuntu0.15.04), 
liboxideqtquick0:i386 (1.9.5-0ubuntu0.15.04.1, 1.10.3-0ubuntu0.15.04.1), 
adobe-flash-properties-kde:i386 (20151013.1-0vivid1, 20151016.2-0vivid1), 
liboxideqtcore0:i386 (1.9.5-0ubuntu0.15.04.1, 1.10.3-0ubuntu0.15.04.1)
  DuplicateSignature: 
package:linux-image-extra-3.19.0-18-generic:3.19.0-18.18:package 
linux-image-extra-3.19.0-18-generic is not ready for configuration  cannot 
configure (current status `half-installed')
  ErrorMessage: package linux-image-extra-3.19.0-18-generic is not ready for 
configuration  cannot configure (current status `half-installed')
  HibernationDevice: RESUME=UUID=e3c4b883-3a26-49f9-a751-702f6f34d91a
  InstallationDate: Installed on 2014-04-30 (538 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release i386 (20140417)
  MachineType: Acer Aspire 5715Z
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-31-generic 
root=UUID=ff1dccf6-c992-49ca-950b-5247729bd64d ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.02~beta2-22ubuntu1.2
  SourcePackage: linux
  Title: package linux-image-extra-3.19.0-18-generic 3.19.0-18.18 failed to 
install/upgrade: package linux-image-extra-3.19.0-18-generic is not ready for 
configuration  cannot configure (current status `half-installed')
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/15/2008
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.33
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Acadia
  dmi.board.vendor: Acer
  dmi.board.version: V1.33
  dmi.chassis.type: 1
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.33
  dmi.modalias: 
dmi:bvnAcer:bvrV1.33:bd03/15/2008:svnAcer:pnAspire5715Z:pvrV1.33:rvnAcer:rnAcadia:rvrV1.33:cvnAcer:ct1:cvrV1.33:
  dmi.product.name: Aspire 5715Z
  dmi.product.version: V1.33
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1508397/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1508334] Re: (from dmesg) i2c i2c-3: sendbytes: NAK bailout.

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1508334

Title:
  (from dmesg) i2c i2c-3: sendbytes: NAK bailout.

Status in linux package in Ubuntu:
  Expired

Bug description:
  Happens a lot in dmesg:

  [   15.891883] i2c i2c-3: sendbytes: NAK bailout.

  .

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-generic 3.13.0.66.72
  ProcVersionSignature: Ubuntu 3.13.0-66.108-generic 3.13.11-ckt27
  Uname: Linux 3.13.0-66-generic i686
  ApportVersion: 2.14.1-0ubuntu3.16
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  icafe-admin   2141 F pulseaudio
  Date: Wed Oct 21 09:17:36 2015
  HibernationDevice: RESUME=UUID=34ca63c4-4d7c-4568-a584-247f84a7c7fd
  InstallationDate: Installed on 2015-05-27 (146 days ago)
  InstallationMedia: Xubuntu 14.04.1 LTS "Trusty Tahr" - Release i386 (20140723)
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: FUJITSU SIEMENS ESPRIMO E5625
  ProcEnviron:
   LANGUAGE=de_DE
   TERM=xterm
   PATH=(custom, no user)
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-66-generic 
root=UUID=8de939f3-fe7a-461b-8c55-1f213b857818 ro quiet splash vt.handoff=7
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-66-generic N/A
   linux-backports-modules-3.13.0-66-generic  N/A
   linux-firmware 1.127.15
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/26/2008
  dmi.bios.vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
  dmi.bios.version: 6.00 R1.05.2724.A1
  dmi.board.name: D2724-A1
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: S26361-D2724-A1
  dmi.chassis.type: 3
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.modalias: 
dmi:bvnFUJITSUSIEMENS//PhoenixTechnologiesLtd.:bvr6.00R1.05.2724.A1:bd06/26/2008:svnFUJITSUSIEMENS:pnESPRIMOE5625:pvr:rvnFUJITSUSIEMENS:rnD2724-A1:rvrS26361-D2724-A1:cvnFUJITSUSIEMENS:ct3:cvr:
  dmi.product.name: ESPRIMO E5625
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1508334/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1508267] Re: Mouse randomly fails to click menu bars, launcher, and title bar

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1508267

Title:
  Mouse randomly fails to click menu bars, launcher, and title bar

Status in linux package in Ubuntu:
  Expired

Bug description:
  Periodically, and unpredictably, Ubuntu will start to ignore mouse clicks. 
The following fails when this condition occurs:
  Clicking title bars.
  Clicking close, maximize, or minimize.
  Mousing into the menu bar at the top of the screen produces no menu bar, and 
does not respond to clicks.
  The launcher on the left no longer produces information on mouse over, nor 
does it respond to clicks.

  The following continues to work when the condition is active:
  Clicking in text input fields within applications.
  Keyboard.

  WORKAROUD: I can generally clear the condition by flailing around with
  alt-enter or by changing to a text console (alt-F1) and back to X.

  ---
  ApportVersion: 2.14.1-0ubuntu3.16
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC0D0p:   dawn   2257 F...m pulseaudio
   /dev/snd/controlC0:  dawn   2257 F pulseaudio
   /dev/snd/controlC1:  dawn   2257 F pulseaudio
  CurrentDmesg: [27114.221018] perf interrupt took too long (2527 > 2500), 
lowering kernel.perf_event_max_sample_rate to 5
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=c420ef2f-b842-4d94-93f0-23a1f6a7a5fe
  InstallationDate: Installed on 2015-10-19 (1 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: MSI MS-7845
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB:

  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic 
root=UUID=56c24b4f-bd35-40b2-b967-e0d4dd65563a ro quiet splash
  ProcVersionSignature: Ubuntu 3.19.0-30.34~14.04.1-generic 3.19.8-ckt6
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-30-generic N/A
   linux-backports-modules-3.19.0-30-generic  N/A
   linux-firmware 1.127.15
  RfKill:

  Tags:  trusty
  Uname: Linux 3.19.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  _MarkForUpload: True
  dmi.bios.date: 05/19/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V1.12
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Z87-GD65 GAMING (MS-7845)
  dmi.board.vendor: MSI
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To be filled by O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MSI
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV1.12:bd05/19/2015:svnMSI:pnMS-7845:pvr1.0:rvnMSI:rnZ87-GD65GAMING(MS-7845):rvr1.0:cvnMSI:ct3:cvr1.0:
  dmi.product.name: MS-7845
  dmi.product.version: 1.0
  dmi.sys.vendor: MSI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1508267/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1349002] Re: Screen brightness cannot be changed on HP EliteBook 8560w

2015-12-20 Thread Launchpad Bug Tracker
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]

** Changed in: linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1349002

Title:
  Screen brightness cannot be changed on HP EliteBook 8560w

Status in linux package in Ubuntu:
  Expired

Bug description:
  I cannot change the screen brightness on my HP Elitebook 8560w. If I
  use the keys for changing the screen brightness (fn + f9 or fn + f10),
  the on-screen display appears and the displayed percentage changes as
  intended but the actual screen brightness does not change (i.e. it
  remains at full brightness). Similarly, if I do not use my computer
  for some time, the on-screen display appears and indicates the the
  screen brightness is reduced (lower percentage) but the actual screen
  brightness remains unchanged (at full brightness). I have this
  computer since November 2011 and I had always the latest Kubuntu
  version installed. Changing the screen brightness always worked until
  and including Kubuntu 13.10. However, it stopped working when I
  upgraded to Kubuntu 14.04.

  ---
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ubuntu 3663 F pulseaudio
   /dev/snd/controlC0:  ubuntu 3663 F pulseaudio
  CasperVersion: 1.340
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  LiveMediaBuild: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2)
  MachineType: Hewlett-Packard HP EliteBook 8560w
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true persistent 
file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet 
splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-32-generic N/A
   linux-backports-modules-3.13.0-32-generic  N/A
   linux-firmware 1.127.5
  Tags:  trusty
  Uname: Linux 3.13.0-32-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/15/2013
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68SVD Ver. F.42
  dmi.board.name: 1631
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 01.3D
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68SVDVer.F.42:bd07/15/2013:svnHewlett-Packard:pnHPEliteBook8560w:pvrA0001D02:rvnHewlett-Packard:rn1631:rvrKBCVersion01.3D:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP EliteBook 8560w
  dmi.product.version: A0001D02
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1349002/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1441104] Re: USB 3.0 storage safely remove issue: re-detect the device(that I have removed already) soon

2015-12-20 Thread 陈伟琪
This bug still "work" for my USB 3.0 devices (storage/hard disk) with
USB 3.0 port.

$ uname -a
Linux B85I-Ubuntu 4.2.0-19-generic #23-Ubuntu SMP Wed Nov 11 11:39:30 UTC 2015 
x86_64 x86_64 x86_64 GNU/Linux

$ cat /etc/issue
Ubuntu 15.10 \n \l

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1441104

Title:
  USB 3.0 storage safely remove issue: re-detect the device(that I have
  removed already) soon

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I have a USB 3.0 Hard Disk, a USB 3.0 Flash storage, and a 4GB micro SD with 
USB 2.0 SD card. When I unmount devices, they still show up when I execute the 
command. For example, when I plug in my USB 3.0 flash storage to my PC's USB 
3.0 port:
  $ df -h
  ...
  /dev/sdc1 30G   17G   13G   57% /media/chen/MyFlash

  I ummount it and safely remove it, and run df -h, you will see it:
  $ sudo umount /dev/sdc1
  ...
  $ sudo udisks --detach /dev/sdc
  $ df -h
  ...
  /dev/sdc1 30G   17G   13G   57% /media/chen/MyFlash

  (4)Oops, The issue is an nightmare!!   :( Please see the log )
  $ sudo lspci -vnvn > lspci-vnvn.usbstorage_usb3.0.log

  
  The behavior of my USB 3.0 Hard disk is same.

  (1) I plug in my USB 3.0 Hard disk to my pc's USB 3.0 port( the same port ).
  (2) My computer detect my storage soon and automatically mount it.
  $ df -h
  ...
  /dev/sdc1932G  205M  932G1% /media/chen/陈家胜

  (3) I ummount it and safely remove it, and run df -h, you will see it:
  $ sudo umount /dev/sdc1
  [sudo] password for chen:
  ...
  $ sudo udisks --detach /dev/sdc
  $ df -h
  ...
  /dev/sdc1932G  205M  932G1% /media/chen/陈家胜

  (4) :( Please see the log:
  $ sudo lspci -vnvn > lspci-vnvn.usbharddisk_usb3.0.log

  
  (5)And I just realize lspci have no information usb storage, so:
  $ lsusb > lsusb3.0harddisk.log

  (6)I unplug my HD and plug in my storage.
  $ lsusb > lsusb3.0storage.log

  
=
  And Have a try that plug in my micro sd card with card reader to USB 3.0 
port( the same port ):

  (1) plug in my micro sd card , and :
  $ df -h
  ...
  /dev/sdd43.7G   38M  3.7G2% /media/chen/DiskGenius
  (2) lsusb:
  $ lsusb 
  ( because i plug in my USB Storage to another usb 3.0 port, so my sd card is 
/dev/sdd4 )
  ( Why i plug in my USB Storage is that i want get string of "Teclast 
CoolFlash USB3.0" )
  ( from gnome-disks And I forgot unplug it...)
  Bus 002 Device 002: ID 8087:8000 Intel Corp. 
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 002: ID 8087:8008 Intel Corp. 
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 013: ID 13fe:5500 Kingston Technology Company Inc. 
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 004: ID 8087:07dc Intel Corp. 
  Bus 003 Device 003: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
  Bus 003 Device 002: ID 24ae:2000  
  Bus 003 Device 008: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash 
Card Reader
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  (3)And then unmount and safely remove my sd card and ... :
  chen@chen-Server:~/bug$ df -h
  文件系统 容量  已用  可用 已用% 挂载点
  ...
  /dev/sdd43.7G   38M  3.7G2% /media/chen/DiskGenius

  chen@chen-Server:~/bug$ lsusb
  Bus 002 Device 002: ID 8087:8000 Intel Corp. 
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 002: ID 8087:8008 Intel Corp. 
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 013: ID 13fe:5500 Kingston Technology Company Inc. 
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 004: ID 8087:07dc Intel Corp. 
  Bus 003 Device 003: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
  Bus 003 Device 002: ID 24ae:2000  
  Bus 003 Device 008: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash 
Card Reader
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  chen@chen-Server:~/bug$ sudo umount /dev/sdd4
  [sudo] password for chen: 
  chen@chen-Server:~/bug$ sudo udisks --detach /dev/sdc
  chen@chen-Server:~/bug$ sudo udisks --detach /dev/sdd
  chen@chen-Server:~/bug$ lsusb
  Bus 002 Device 002: ID 8087:8000 Intel Corp. 
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 002: ID 8087:8008 Intel Corp. 
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 014: ID 13fe:5500 Kingston Technology Company Inc. 
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 004: ID 8087:07dc Intel Corp. 
  Bus 003 Device 003: ID 1a86:7523 

[Kernel-packages] [Bug 1528047] Status changed to Confirmed

2015-12-20 Thread Brad Figg
This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528047

Title:
  package linux-image-4.2.0-22-generic (not installed) failed to
  install/upgrade: subprocess new pre-installation script returned error
  exit status 1

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  This machine (I believe) has PAE capabilities (Pentium-M), but 15.10 has 
become very unforgiving of machines that don't report PAE flags in 
/proc/cpuinfo.  
  I had a royal pain in the behind upgrading from 15.04 (where --forcepae just 
did the business) to 15.10 because this package wouldn't install and only 
managed to retrive a completely stuffed machine by hacking /proc/cpuinfo to 
force the PAE flag on there. This is of course temporary.

  It would be useful if whoever maintains the code that does
  /proc/cpuinfo would recognize the exception created by Intel with not
  correctly reporting PAE and fix this flag if future Ubuntu releases
  are going to barf so badly on not seeing it.

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-22-generic (not installed)
  ProcVersionSignature: Ubuntu 4.2.0-21.25-generic 4.2.6
  Uname: Linux 4.2.0-21-generic i686
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  der1402 F pulseaudio
  Date: Sun Dec 20 20:38:38 2015
  DpkgTerminalLog:
   Preparing to unpack .../linux-image-4.2.0-22-generic_4.2.0-22.27_i386.deb ...
   This kernel does not support a non-PAE CPU.
   dpkg: error processing archive 
/var/cache/apt/archives/linux-image-4.2.0-22-generic_4.2.0-22.27_i386.deb 
(--unpack):
subprocess new pre-installation script returned error exit status 1
  DuplicateSignature: package:linux-image-4.2.0-22-generic:(not 
installed):subprocess new pre-installation script returned error exit status 1
  ErrorMessage: subprocess new pre-installation script returned error exit 
status 1
  HibernationDevice: RESUME=UUID=8c5a77c4-3860-4ef9-8bed-60184472e824
  InstallationDate: Installed on 2015-01-29 (324 days ago)
  InstallationMedia: Lubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: IBM 2371EG2
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-21-generic 
root=UUID=332336ad-e4aa-403e-bca9-8c4d9c38a491 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.02~beta2-29ubuntu0.2
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  Title: package linux-image-4.2.0-22-generic (not installed) failed to 
install/upgrade: subprocess new pre-installation script returned error exit 
status 1
  UpgradeStatus: Upgraded to wily on 2015-12-17 (2 days ago)
  dmi.bios.date: 10/13/2004
  dmi.bios.vendor: IBM
  dmi.bios.version: 1UET93WW (1.43 )
  dmi.board.name: 2371EG2
  dmi.board.vendor: IBM
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: IBM
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnIBM:bvr1UET93WW(1.43):bd10/13/2004:svnIBM:pn2371EG2:pvrThinkPadX40:rvnIBM:rn2371EG2:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable:
  dmi.product.name: 2371EG2
  dmi.product.version: ThinkPad X40
  dmi.sys.vendor: IBM

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1528047/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1528047] Re: package linux-image-4.2.0-22-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1

2015-12-20 Thread Apport retracing service
** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528047

Title:
  package linux-image-4.2.0-22-generic (not installed) failed to
  install/upgrade: subprocess new pre-installation script returned error
  exit status 1

Status in linux package in Ubuntu:
  New

Bug description:
  This machine (I believe) has PAE capabilities (Pentium-M), but 15.10 has 
become very unforgiving of machines that don't report PAE flags in 
/proc/cpuinfo.  
  I had a royal pain in the behind upgrading from 15.04 (where --forcepae just 
did the business) to 15.10 because this package wouldn't install and only 
managed to retrive a completely stuffed machine by hacking /proc/cpuinfo to 
force the PAE flag on there. This is of course temporary.

  It would be useful if whoever maintains the code that does
  /proc/cpuinfo would recognize the exception created by Intel with not
  correctly reporting PAE and fix this flag if future Ubuntu releases
  are going to barf so badly on not seeing it.

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-22-generic (not installed)
  ProcVersionSignature: Ubuntu 4.2.0-21.25-generic 4.2.6
  Uname: Linux 4.2.0-21-generic i686
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  der1402 F pulseaudio
  Date: Sun Dec 20 20:38:38 2015
  DpkgTerminalLog:
   Preparing to unpack .../linux-image-4.2.0-22-generic_4.2.0-22.27_i386.deb ...
   This kernel does not support a non-PAE CPU.
   dpkg: error processing archive 
/var/cache/apt/archives/linux-image-4.2.0-22-generic_4.2.0-22.27_i386.deb 
(--unpack):
subprocess new pre-installation script returned error exit status 1
  DuplicateSignature: package:linux-image-4.2.0-22-generic:(not 
installed):subprocess new pre-installation script returned error exit status 1
  ErrorMessage: subprocess new pre-installation script returned error exit 
status 1
  HibernationDevice: RESUME=UUID=8c5a77c4-3860-4ef9-8bed-60184472e824
  InstallationDate: Installed on 2015-01-29 (324 days ago)
  InstallationMedia: Lubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: IBM 2371EG2
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-21-generic 
root=UUID=332336ad-e4aa-403e-bca9-8c4d9c38a491 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.02~beta2-29ubuntu0.2
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  Title: package linux-image-4.2.0-22-generic (not installed) failed to 
install/upgrade: subprocess new pre-installation script returned error exit 
status 1
  UpgradeStatus: Upgraded to wily on 2015-12-17 (2 days ago)
  dmi.bios.date: 10/13/2004
  dmi.bios.vendor: IBM
  dmi.bios.version: 1UET93WW (1.43 )
  dmi.board.name: 2371EG2
  dmi.board.vendor: IBM
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: IBM
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnIBM:bvr1UET93WW(1.43):bd10/13/2004:svnIBM:pn2371EG2:pvrThinkPadX40:rvnIBM:rn2371EG2:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable:
  dmi.product.name: 2371EG2
  dmi.product.version: ThinkPad X40
  dmi.sys.vendor: IBM

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1528047/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1528047] [NEW] package linux-image-4.2.0-22-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1

2015-12-20 Thread Derek Roberts
Public bug reported:

This machine (I believe) has PAE capabilities (Pentium-M), but 15.10 has become 
very unforgiving of machines that don't report PAE flags in /proc/cpuinfo.  
I had a royal pain in the behind upgrading from 15.04 (where --forcepae just 
did the business) to 15.10 because this package wouldn't install and only 
managed to retrive a completely stuffed machine by hacking /proc/cpuinfo to 
force the PAE flag on there. This is of course temporary.

It would be useful if whoever maintains the code that does /proc/cpuinfo
would recognize the exception created by Intel with not correctly
reporting PAE and fix this flag if future Ubuntu releases are going to
barf so badly on not seeing it.

ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: linux-image-4.2.0-22-generic (not installed)
ProcVersionSignature: Ubuntu 4.2.0-21.25-generic 4.2.6
Uname: Linux 4.2.0-21-generic i686
ApportVersion: 2.19.1-0ubuntu5
Architecture: i386
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  der1402 F pulseaudio
Date: Sun Dec 20 20:38:38 2015
DpkgTerminalLog:
 Preparing to unpack .../linux-image-4.2.0-22-generic_4.2.0-22.27_i386.deb ...
 This kernel does not support a non-PAE CPU.
 dpkg: error processing archive 
/var/cache/apt/archives/linux-image-4.2.0-22-generic_4.2.0-22.27_i386.deb 
(--unpack):
  subprocess new pre-installation script returned error exit status 1
DuplicateSignature: package:linux-image-4.2.0-22-generic:(not 
installed):subprocess new pre-installation script returned error exit status 1
ErrorMessage: subprocess new pre-installation script returned error exit status 
1
HibernationDevice: RESUME=UUID=8c5a77c4-3860-4ef9-8bed-60184472e824
InstallationDate: Installed on 2015-01-29 (324 days ago)
InstallationMedia: Lubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1)
Lsusb:
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: IBM 2371EG2
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-21-generic 
root=UUID=332336ad-e4aa-403e-bca9-8c4d9c38a491 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.02~beta2-29ubuntu0.2
RfKill:
 0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
Title: package linux-image-4.2.0-22-generic (not installed) failed to 
install/upgrade: subprocess new pre-installation script returned error exit 
status 1
UpgradeStatus: Upgraded to wily on 2015-12-17 (2 days ago)
dmi.bios.date: 10/13/2004
dmi.bios.vendor: IBM
dmi.bios.version: 1UET93WW (1.43 )
dmi.board.name: 2371EG2
dmi.board.vendor: IBM
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: IBM
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnIBM:bvr1UET93WW(1.43):bd10/13/2004:svnIBM:pn2371EG2:pvrThinkPadX40:rvnIBM:rn2371EG2:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable:
dmi.product.name: 2371EG2
dmi.product.version: ThinkPad X40
dmi.sys.vendor: IBM

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 wily

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528047

Title:
  package linux-image-4.2.0-22-generic (not installed) failed to
  install/upgrade: subprocess new pre-installation script returned error
  exit status 1

Status in linux package in Ubuntu:
  New

Bug description:
  This machine (I believe) has PAE capabilities (Pentium-M), but 15.10 has 
become very unforgiving of machines that don't report PAE flags in 
/proc/cpuinfo.  
  I had a royal pain in the behind upgrading from 15.04 (where --forcepae just 
did the business) to 15.10 because this package wouldn't install and only 
managed to retrive a completely stuffed machine by hacking /proc/cpuinfo to 
force the PAE flag on there. This is of course temporary.

  It would be useful if whoever maintains the code that does
  /proc/cpuinfo would recognize the exception created by Intel with not
  correctly reporting PAE and fix this flag if future Ubuntu releases
  are going to barf so badly on not seeing it.

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-22-generic (not installed)
  ProcVersionSignature: Ubuntu 4.2.0-21.25-generic 4.2.6
  Uname: Linux 4.2.0-21-generic i686
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  der1402 F pulseaudio
  Date: Sun Dec 20 20:38:38 2015
  DpkgTerminalLog:
   Preparing to unpack 

[Kernel-packages] [Bug 1527491] Re: QinHeng Electronics HL-340 USB-Serial adapter

2015-12-20 Thread Pieter
apport information

** Tags added: apport-collected wily

** Description changed:

  USB serial adapter detected but not working.
  
  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
  
  
  $ ls /dev/ttyU*
  /dev/ttyUSB0
  
  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device
  
  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
  
  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works
+ --- 
+ ApportVersion: 2.19.1-0ubuntu5
+ Architecture: amd64
+ CurrentDesktop: Unity
+ DistroRelease: Ubuntu 15.10
+ InstallationDate: Installed on 2015-01-23 (331 days ago)
+ InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
+ Package: linux (not installed)
+ Tags:  wily
+ Uname: Linux 4.3.0-040300-lowlatency x86_64
+ UnreportableReason: The running kernel is not an Ubuntu kernel
+ UpgradeStatus: Upgraded to wily on 2015-11-11 (39 days ago)
+ UserGroups: adm btsync cdrom dialout dip kismet kvm libvirtd lpadmin plugdev 
sambashare sudo wireshark
+ _MarkForUpload: True

** Attachment added: "JournalErrors.txt"
   
https://bugs.launchpad.net/bugs/1527491/+attachment/4538069/+files/JournalErrors.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works
  --- 
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.10
  InstallationDate: Installed on 2015-01-23 (331 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  Package: linux (not installed)
  Tags:  wily
  Uname: Linux 4.3.0-040300-lowlatency x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: Upgraded to wily on 2015-11-11 (39 days ago)
  UserGroups: adm btsync cdrom dialout dip kismet kvm libvirtd lpadmin plugdev 
sambashare sudo wireshark
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527491] ProcEnviron.txt

2015-12-20 Thread Pieter
apport information

** Attachment added: "ProcEnviron.txt"
   
https://bugs.launchpad.net/bugs/1527491/+attachment/4538070/+files/ProcEnviron.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works
  --- 
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.10
  InstallationDate: Installed on 2015-01-23 (331 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  Package: linux (not installed)
  Tags:  wily
  Uname: Linux 4.3.0-040300-lowlatency x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: Upgraded to wily on 2015-11-11 (39 days ago)
  UserGroups: adm btsync cdrom dialout dip kismet kvm libvirtd lpadmin plugdev 
sambashare sudo wireshark
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1528057] [NEW] package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código

2015-12-20 Thread ricardo
Public bug reported:

me salio un popup aclarando que hubo un error de instalacion

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1
ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
Uname: Linux 3.19.0-42-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.19
Architecture: amd64
Date: Sun Dec 20 15:35:00 2015
ErrorMessage: el subproceso instalado el script post-installation devolvió el 
código de salida de error 1
InstallationDate: Installed on 2015-12-14 (6 days ago)
InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
RelatedPackageVersions:
 dpkg 1.17.5ubuntu5.5
 apt  1.0.1ubuntu2.10
SourcePackage: linux-lts-vivid
Title: package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1 failed 
to install/upgrade: el subproceso instalado el script post-installation 
devolvió el código de salida de error 1
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-lts-vivid (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-vivid in Ubuntu.
https://bugs.launchpad.net/bugs/1528057

Title:
  package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1
  failed to install/upgrade: el subproceso instalado el script post-
  installation devolvió el código de salida de error 1

Status in linux-lts-vivid package in Ubuntu:
  New

Bug description:
  me salio un popup aclarando que hubo un error de instalacion

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1
  ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
  Uname: Linux 3.19.0-42-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  Date: Sun Dec 20 15:35:00 2015
  ErrorMessage: el subproceso instalado el script post-installation devolvió el 
código de salida de error 1
  InstallationDate: Installed on 2015-12-14 (6 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: linux-lts-vivid
  Title: package linux-image-extra-3.19.0-42-generic 3.19.0-42.48~14.04.1 
failed to install/upgrade: el subproceso instalado el script post-installation 
devolvió el código de salida de error 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-vivid/+bug/1528057/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1522949] Re: Bluetooth doesn't work on 0930:0225 Toshiba Corporation

2015-12-20 Thread Pilot6
** Changed in: linux (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1522949

Title:
  Bluetooth doesn't work on 0930:0225 Toshiba Corporation

Status in linux package in Ubuntu:
  Fix Released

Bug description:
  I have not been able to get bluetooth running in Ubuntu 14.04, 14.10,
  or 15.10 on my Toshiba laptop. Bluetooth does work under Windows.
  There is no bluetooth icon. The bluetooth manager says "Bluetooth is
  disabled" whether I set it to On or Off.

  
  rfkill list:

  0: Toshiba Bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
  [...]

  The modified kernel is because I installed btusb-lp1506615-dkms from
  https://launchpad.net/~hanipouspilot/+archive/ubuntu/bluetooth . No
  change in behavior.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-16-generic 4.2.0-16.19 [modified: 
boot/vmlinuz-4.2.0-16-generic]
  ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
  Uname: Linux 4.2.0-16-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.19.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  josiah 1874 F pulseaudio
   /dev/snd/controlC1:  josiah 1874 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Dec  4 14:45:28 2015
  HibernationDevice: RESUME=UUID=0bcbd4ab-9f94-44d7-857f-717f4e7c9481
  InstallationDate: Installed on 2015-12-03 (1 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  MachineType: TOSHIBA Satellite L75-B
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: \boot\vmlinuz-4.2.0-16-generic.efi.signed 
root=UUID=edea9167-ead7-4da4-81ac-fa65520b3e91 ro quiet splash vt.handoff=7 
initrd=boot\initrd.img-4.2.0-16-generic
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-16-generic N/A
   linux-backports-modules-4.2.0-16-generic  N/A
   linux-firmware1.149
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/03/2014
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: 1.60
  dmi.board.name: Portable PC
  dmi.board.vendor: TOSHIBA
  dmi.board.version: MP
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: OEM Chassis Manufacturer
  dmi.chassis.version: OEM Chassis Version
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvr1.60:bd11/03/2014:svnTOSHIBA:pnSatelliteL75-B:pvrPSKRLU-01400M:rvnTOSHIBA:rnPortablePC:rvrMP:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
  dmi.product.name: Satellite L75-B
  dmi.product.version: PSKRLU-01400M
  dmi.sys.vendor: TOSHIBA

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1522949/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527409] tarf (i386) - tests ran: 153, failed: 0

2015-12-20 Thread Brad Figg
tests ran: 153, failed: 0;
  
http://kernel.ubuntu.com/testing/3.16.0-57.77~14.04.1/tarf__3.16.0-57.77~14.04.1__2015-12-20_07-30-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1527409

Title:
  linux-lts-utopic: 3.16.0-57.77~14.04.1 -proposed tracker

Status in Kernel SRU Workflow:
  Fix Released
Status in Kernel SRU Workflow automated-testing series:
  Fix Released
Status in Kernel SRU Workflow certification-testing series:
  Invalid
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-security series:
  Fix Released
Status in Kernel SRU Workflow promote-to-updates series:
  Fix Released
Status in Kernel SRU Workflow regression-testing series:
  Fix Released
Status in Kernel SRU Workflow security-signoff series:
  Fix Released
Status in Kernel SRU Workflow verification-testing series:
  Fix Released
Status in linux-lts-utopic package in Ubuntu:
  New
Status in linux-lts-utopic source package in Trusty:
  Fix Released

Bug description:
  This bug is for tracking the 3.16.0-57.77~14.04.1 upload package. This
  bug will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Thursday, 17. December 2015 23:02 UTC
  kernel-stable-Prepare-package-end:Friday, 18. December 2015 09:51 UTC
  kernel-stable-Promote-to-proposed-start:Friday, 18. December 2015 09:51 UTC
  kernel-stable-Promote-to-proposed-end:Friday, 18. December 2015 16:14 UTC
  kernel-stable-Verification-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Certification-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Security-signoff-start:Friday, 18. December 2015 18:03 UTC
  proposed-announcement-sent:True
  kernel-stable-Regression-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Promote-to-updates-start:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Security-signoff-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Certification-testing-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Regression-testing-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Promote-to-updates-end:Friday, 18. December 2015 19:59 UTC
  kernel-stable-phase:Released
  kernel-stable-phase-changed:Friday, 18. December 2015 21:02 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1527409/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527826] Re: Please enable dmidecode for arm64

2015-12-20 Thread Bug Watch Updater
** Changed in: dmidecode (Debian)
   Status: Unknown => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to dmidecode in Ubuntu.
https://bugs.launchpad.net/bugs/1527826

Title:
  Please enable dmidecode for arm64

Status in dmidecode package in Ubuntu:
  New
Status in dmidecode package in Debian:
  Fix Released

Bug description:
  ARM64 systems can provide UEFI/SMBIOS interfaces. Please enable
  dmidecode package for ARM64 arch, so that it can be used to read
  SMBIOS data on such systems.

  -- 
  With best wishes
  Dmitry

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dmidecode/+bug/1527826/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1433564] Re: Speaker does not auto mute

2015-12-20 Thread Jarno Suni
Still occurs in linux 4.2.0-16-generic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1433564

Title:
  Speaker does not auto mute

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Speaker does not auto mute when headphone plugs in, even if Auto-Mute
  Mode is set to Speaker Only or Line Out+Speaker in alsamixer. This is
  when pulseaudio is not used.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-46-lowlatency 3.13.0-46.79
  ProcVersionSignature: Ubuntu 3.13.0-46.79-lowlatency 3.13.11-ckt15
  Uname: Linux 3.13.0-46-lowlatency x86_64
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Wed Mar 18 14:17:19 2015
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-09-21 (178 days ago)
  InstallationMedia: Ubuntu-Studio 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.1)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: Dell Inc. OptiPlex 745
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-lowlatency 
root=UUID=d012c1bd-7e56-4035-b321-38d20cb14421 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-46-lowlatency N/A
   linux-backports-modules-3.13.0-46-lowlatency  N/A
   linux-firmware1.127.11
  RfKill:

  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/26/2011
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.6.6
  dmi.board.name: 0RF703
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 6
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.6.6:bd06/26/2011:svnDellInc.:pnOptiPlex745:pvr:rvnDellInc.:rn0RF703:rvr:cvnDellInc.:ct6:cvr:
  dmi.product.name: OptiPlex 745
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1433564/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1520343] Re: Qualcomm Atheros wireless card [168c:003e] (rev 32) not supported

2015-12-20 Thread kpbochenek
Hi Denis,

you are the best guy on this planet! I tried different versions of this driver, 
rebooted my Acer for a whole day and then used your driver and it started 
working!
I was so close to giving up, thanks a lot :D

~kpbochenek

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1520343

Title:
  Qualcomm Atheros wireless card [168c:003e] (rev 32) not supported

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I have recently installed Ubuntu 15.10 (64-bit) alongside Windows 10 on an 
Acer Aspire VN7-792G-76ZH and discovered, that the Qualcomm wireless card 
doesn't work in it or 16.04.
  The card has the device id 168c:003e as many other cards, for example the 
Qualcomm Atheros Killer 
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184), but it has a 
newer revision number (32) and the suggested fixes work only partially and the 
wireless is unusable.

  The computer has just been released this summer and is Intel Skylake
  -based.

  I've tried the patch from bug 1383184, which has a fix for the card revision 
20:
  Make the directory /lib/firmware/ath10k/QCA6174/hw3.0/ and put in the patch 
files:
  board.bin
  firmware-4.bin
  notice_ath10k_firmware-4.txt

  ath10k_pci succeeds in loading the firmware, but it seems that the
  firmware is not working correctly:

  dmesg | grep ath
  [5.452683] ath10k_pci :07:00.0: pci irq msi-x interrupts 8 irq_mode 0 
reset_mode 0
  [5.678420] ath10k_pci :07:00.0: Direct firmware load for 
ath10k/cal-pci-:07:00.0.bin failed with error -2
  [5.678773] ath10k_pci :07:00.0: Direct firmware load for 
ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin failed with error -2
  [5.678781] ath10k_pci :07:00.0: failed to load spec board file, 
falling back to generic: -2
  [5.679445] ath10k_pci :07:00.0: Direct firmware load for 
ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
  [5.679453] ath10k_pci :07:00.0: could not fetch firmware file 
'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
  [7.802316] ath10k_pci :07:00.0: qca6174 hw3.2 (0x0503, 
0x00340aff, 168c:003e:11ad:0807 fallback) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 
4 htt 3.26 wmi 4 cal otp max_sta 32
  [7.802329] ath10k_pci :07:00.0: debug 0 debugfs 1 tracing 1 dfs 0 
testmode 0
  [8.200607] ath: EEPROM regdomain: 0x6c
  [8.200614] ath: EEPROM indicates we should expect a direct regpair map
  [8.200619] ath: Country alpha2 being used: 00
  [8.200621] ath: Regpair used: 0x6c
  [8.216605] ath10k_pci :07:00.0 wlp7s0: renamed from wlan0
  [   13.462029] ath10k_pci :07:00.0: failed to enable dynamic BW: -11
  [   16.461416] ath10k_pci :07:00.0: could not suspend target (-11)
  [   24.760062] ath10k_pci :07:00.0: failed to enable dynamic BW: -11
  [   27.759534] ath10k_pci :07:00.0: could not suspend target (-11)
  [   36.046205] ath10k_pci :07:00.0: failed to set arp ac override 
parameter: -11
  [   39.045729] ath10k_pci :07:00.0: could not suspend target (-11)
  [   47.344304] ath10k_pci :07:00.0: failed to enable dynamic BW: -11
  [   50.343794] ath10k_pci :07:00.0: could not suspend target (-11)
  [   58.630534] ath10k_pci :07:00.0: failed to enable dynamic BW: -11
  [   61.629936] ath10k_pci :07:00.0: could not suspend target (-11)
  [   69.920624] ath10k_pci :07:00.0: failed to enable dynamic BW: -11
  [   72.920132] ath10k_pci :07:00.0: could not suspend target (-11)
  [   81.206812] ath10k_pci :07:00.0: failed to enable dynamic BW: -11
  [   84.206218] ath10k_pci :07:00.0: could not suspend target (-11)
  ...

  Then it just constantly prints the last two messages on and on.
  I can weirdly enough see the card in iwconfig:
  wlp7s0IEEE 802.11abgn  ESSID:off/any
    Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm
    Retry short limit:7   RTS thr:off   Fragment thr:off
    Power Management:off

  And I can see the wireless-icon in the toolbar, but scanning for
  access points or trying to connect to one doesn't work.

  This is the furthest I've gotten. I suspect this card needs a new
  firmware in ath10k?

  ---
  ApportVersion: 2.19.2-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  dennis 1230 F pulseaudio
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 16.04
  HibernationDevice: RESUME=UUID=bed7757a-3749-4efb-9e9f-0ce8129bfbb9
  InstallationDate: Installed on 2015-11-11 (15 days ago)
  InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151110)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 04f2:b520 Chicony Electronics Co., Ltd
   Bus 001 Device 002: ID 04ca:3016 Lite-On Technology Corp.
   Bus 001 Device 004: ID 0bda:0129 Realtek 

[Kernel-packages] [Bug 1527359] Re: Wily update to v4.2.8 stable release

2015-12-20 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux (Ubuntu Wily)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527359

Title:
  Wily update to v4.2.8 stable release

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  SRU Justification

  Impact:
     The upstream process for stable tree updates is quite similar
     in scope to the Ubuntu SRU process, e.g., each patch has to
     demonstrably fix a bug, and each patch is vetted by upstream
     by originating either directly from Linus' tree or in a minimally
     backported form of that patch. The v4.2.8 upstream stable
     patch set is now available. It should be included in the Ubuntu
     kernel as well.

     git://git.kernel.org/

  TEST CASE: TBD

     The following patches are in the v4.2.8 stable release:

  Linux 4.2.8
  Btrfs: fix regression running delayed references when using qgroups
  cobalt: fix Kconfig dependency
  ALSA: hda/hdmi - apply Skylake fix-ups to Broxton display codec
  ceph: fix message length computation
  ocfs2: fix umask ignored issue
  nfs: if we have no valid attrs, then don't declare the attribute cache valid
  nfs4: start callback_ident at idr 1
  debugfs: fix refcount imbalance in start_creating
  nfsd: eliminate sending duplicate and repeated delegations
  nfsd: serialize state seqid morphing operations
  firewire: ohci: fix JMicron JMB38x IT context discovery
  ext4, jbd2: ensure entering into panic after recording an error in superblock
  ext4: fix potential use after free in __ext4_journal_stop
  ext4 crypto: replace some BUG_ON()'s with error checks
  ext4 crypto: fix memory leak in ext4_bio_write_page()
  rbd: don't put snap_context twice in rbd_queue_workfn()
  btrfs: fix signed overflows in btrfs_sync_file
  Btrfs: fix race when listing an inode's xattrs
  Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow
  Btrfs: fix race leading to incorrect item deletion when dropping extents
  Btrfs: fix regression when running delayed references
  Btrfs: fix truncation of compressed and inlined extents
  Btrfs: fix file corruption and data loss after cloning inline extents
  btrfs: fix resending received snapshot with parent
  via-rhine: fix VLAN receive handling regression.
  net_sched: fix qdisc_tree_decrease_qlen() races
  ipv6: sctp: implement sctp_v6_destroy_sock()
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  ipv6: add complete rcu protection around np->opt
  bpf, array: fix heap out-of-bounds access when updating elements
  RDS: fix race condition when sending a message on unbound socket
  ipv6: distinguish frag queues by device for multicast and link-local packets
  broadcom: fix PHY_ID_BCM5481 entry in the id table
  net: ip6mr: fix static mfc/dev leaks on table destruction
  net: ipmr: fix static mfc/dev leaks on table destruction
  net, scm: fix PaX detected msg_controllen overflow in scm_detach_fds
  tcp: initialize tp->copied_seq in case of cross SYN connection
  tcp: fix potential huge kmalloc() calls in TCP_REPAIR
  tcp: disable Fast Open on timeouts after handshake
  tcp: md5: fix lockdep annotation
  net: qmi_wwan: add XS Stick W100-2 from 4G Systems
  snmp: Remove duplicate OUTMCAST stat increment
  net: thunder: Check for driver data in nicvf_remove()
  net: switchdev: fix return code of fdb_dump stub
  ip_tunnel: disable preemption when updating per-cpu tstats
  net/mlx4_core: Fix sleeping while holding spinlock at rem_slave_counters
  sctp: translate host order to network order when setting a hmacid
  packet: fix tpacket_snd max frame len
  packet: infer protocol from ethernet header if unset
  packet: only allow extra vlan len on ethernet devices
  packet: always probe for transport header
  packet: do skb_probe_transport_header when we actually have data
  tools/net: Use include/uapi with __EXPORTED_HEADERS__
  ipv6: Check rt->dst.from for the DST_NOCACHE route
  ipv6: Check expire on DST_NOCACHE route
  ipv6: Avoid creating RTF_CACHE from a rt that is not managed by fib6 tree
  af-unix: passcred support for sendpage
  unix: avoid use-after-free in ep_remove_wait_queue
  af_unix: take receive queue lock while appending new skb
  af_unix: don't append consumed skbs to sk_receive_queue
  af-unix: fix use-after-free with concurrent readers while splicing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527359/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 219057] Re: Bluetooth does not coexist with WiFi

2015-12-20 Thread Julian Alarcon
Funny thing, I didn't have many hope to my workaround because in Ubuntu
15.04 because after some minutes, It failed. But now on Ubuntu 15.10,
with Bluez 5, the problem still exist but my workaround  works.

echo "options iwlwifi 11n_disable=1 bt_coex_active=0 power_save=0
auto_agg=0 swcrypto=1" | sudo tee /etc/modprobe.d/iwlwifi.conf >
/dev/null

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/219057

Title:
  Bluetooth does not coexist with WiFi

Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  On my system bluetooth and wifi are unusable together. I have a built-
  in CSR-based bluetooth module in my laptop, and an Atheros wifi. Wifi
  transfers slow to a halt whenever there is BT traffic.

  For example, if I play a music file from another machine through the
  network using a BT headset, only the first few seconds of the file
  will play until the player runs out of buffered data. No further data
  is downloaded. Web pages also do not download, and I even lose
  connection to AP from time to time.

  At the same time, it looks like AFH is trying to work. If I monitor
  the value returned by 'hcitool afh', it changes. But this seems to
  have little effect on connection quality.

  Is this a problem with my hardware, or the AFH implementation? Is
  there a way to force bluetooth to not use the channels in use by WiFi?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/219057/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527359] Re: Wily update to v4.2.8 stable release

2015-12-20 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527359

Title:
  Wily update to v4.2.8 stable release

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Wily:
  Confirmed

Bug description:
  SRU Justification

  Impact:
     The upstream process for stable tree updates is quite similar
     in scope to the Ubuntu SRU process, e.g., each patch has to
     demonstrably fix a bug, and each patch is vetted by upstream
     by originating either directly from Linus' tree or in a minimally
     backported form of that patch. The v4.2.8 upstream stable
     patch set is now available. It should be included in the Ubuntu
     kernel as well.

     git://git.kernel.org/

  TEST CASE: TBD

     The following patches are in the v4.2.8 stable release:

  Linux 4.2.8
  Btrfs: fix regression running delayed references when using qgroups
  cobalt: fix Kconfig dependency
  ALSA: hda/hdmi - apply Skylake fix-ups to Broxton display codec
  ceph: fix message length computation
  ocfs2: fix umask ignored issue
  nfs: if we have no valid attrs, then don't declare the attribute cache valid
  nfs4: start callback_ident at idr 1
  debugfs: fix refcount imbalance in start_creating
  nfsd: eliminate sending duplicate and repeated delegations
  nfsd: serialize state seqid morphing operations
  firewire: ohci: fix JMicron JMB38x IT context discovery
  ext4, jbd2: ensure entering into panic after recording an error in superblock
  ext4: fix potential use after free in __ext4_journal_stop
  ext4 crypto: replace some BUG_ON()'s with error checks
  ext4 crypto: fix memory leak in ext4_bio_write_page()
  rbd: don't put snap_context twice in rbd_queue_workfn()
  btrfs: fix signed overflows in btrfs_sync_file
  Btrfs: fix race when listing an inode's xattrs
  Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow
  Btrfs: fix race leading to incorrect item deletion when dropping extents
  Btrfs: fix regression when running delayed references
  Btrfs: fix truncation of compressed and inlined extents
  Btrfs: fix file corruption and data loss after cloning inline extents
  btrfs: fix resending received snapshot with parent
  via-rhine: fix VLAN receive handling regression.
  net_sched: fix qdisc_tree_decrease_qlen() races
  ipv6: sctp: implement sctp_v6_destroy_sock()
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  ipv6: add complete rcu protection around np->opt
  bpf, array: fix heap out-of-bounds access when updating elements
  RDS: fix race condition when sending a message on unbound socket
  ipv6: distinguish frag queues by device for multicast and link-local packets
  broadcom: fix PHY_ID_BCM5481 entry in the id table
  net: ip6mr: fix static mfc/dev leaks on table destruction
  net: ipmr: fix static mfc/dev leaks on table destruction
  net, scm: fix PaX detected msg_controllen overflow in scm_detach_fds
  tcp: initialize tp->copied_seq in case of cross SYN connection
  tcp: fix potential huge kmalloc() calls in TCP_REPAIR
  tcp: disable Fast Open on timeouts after handshake
  tcp: md5: fix lockdep annotation
  net: qmi_wwan: add XS Stick W100-2 from 4G Systems
  snmp: Remove duplicate OUTMCAST stat increment
  net: thunder: Check for driver data in nicvf_remove()
  net: switchdev: fix return code of fdb_dump stub
  ip_tunnel: disable preemption when updating per-cpu tstats
  net/mlx4_core: Fix sleeping while holding spinlock at rem_slave_counters
  sctp: translate host order to network order when setting a hmacid
  packet: fix tpacket_snd max frame len
  packet: infer protocol from ethernet header if unset
  packet: only allow extra vlan len on ethernet devices
  packet: always probe for transport header
  packet: do skb_probe_transport_header when we actually have data
  tools/net: Use include/uapi with __EXPORTED_HEADERS__
  ipv6: Check rt->dst.from for the DST_NOCACHE route
  ipv6: Check expire on DST_NOCACHE route
  ipv6: Avoid creating RTF_CACHE from a rt that is not managed by fib6 tree
  af-unix: passcred support for sendpage
  unix: avoid use-after-free in ep_remove_wait_queue
  af_unix: take receive queue lock while appending new skb
  af_unix: don't append consumed skbs to sk_receive_queue
  af-unix: fix use-after-free with concurrent readers while splicing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527359/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1520040] Re: [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!

2015-12-20 Thread Dara Adib
*** This bug is a duplicate of bug 1488719 ***
https://bugs.launchpad.net/bugs/1488719

Marking as a duplicate of bug 1488719. If you believe this is a separate
bug please change it back.

** This bug has been marked a duplicate of bug 1488719
   dmesg shows "[drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!"

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1520040

Title:
  [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt
  lied (SDE)!

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Device: notebook Dell Inspiron 5548

  Operating system: 64-bit XUbuntu Linux 14.04 LTS

  Processor: Intel Core i7-5500U

  Kernel: 3.19.0-33-generic #38~14.04.1-Ubuntu SMP x86_64

  Video: dual chip. These are the two display controllers:
  - Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260] display 
controller 3300Hz (requires kernel module / device driver "fglrx"); and
  - Intel Corporation Broadwell-U Integrated Graphics VGA compatible controller 
3300Hz (requires kernel module / device driver "i915").

  Problem: my notebook's operating system is switching to runlevel 0
  (power off) randomly, subtly and thus unexpectedly. And if I 'cat
  /var/log/kern.log |grep -i i915' I get a lot of "[drm:gen8_irq_handler
  [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!"
  messages. I'm under the impression that either the kernel or the
  kernel module "i915_bpo" is buggy.

  My notebook's problem can't be related to overheating, because it's a
  brand-new notebook (less than 1 month old) and I've already monitored
  its temperature parameters: nothing abnormal is happening. Also, I'm
  using a cooling laptop base/pad.

  Other kernels I've tested, with which the same issue happens:
  - 3.19.0-18-generic (kernel module: i915_bpo)
  - 3.19.0-23-generic (kernel module: i915_bpo)
  - 3.19.0-28-generic (kernel module: i915_bpo)
  - 4.2.0-18-generic (kernel module: i915)

  Temporary workaround: I downgraded to kernel "3.13.0-36-generic",
  which isn't buggy with its "i915_bdw.ko" (version 3.0) kernel object
  (module). Full path for this module:
  /lib/modules/3.13.0-36-generic/kernel/ubuntu/i915/i915_bdw.ko

  Notes:
  - "bdw" stands for "Broadwell"
  - "bpo", I believe, stands for "backport"

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.19.0-33-generic 3.19.0-33.38~14.04.1
  ProcVersionSignature: Ubuntu 3.19.0-33.38~14.04.1-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-33-generic x86_64
  NonfreeKernelModules: wl fglrx
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Wed Nov 25 23:44:39 2015
  InstallationDate: Installed on 2015-11-03 (22 days ago)
  InstallationMedia: Xubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  SourcePackage: linux-lts-vivid
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  yuriyrs2832 F pulseaudio
   /dev/snd/controlC1:  yuriyrs2832 F pulseaudio
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=a08f36f9-0611-4894-9da9-8b1dcc960a86
  InstallationDate: Installed on 2015-11-03 (24 days ago)
  InstallationMedia: Xubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  MachineType: Dell Inc. Inspiron 5548
  NonfreeKernelModules: fglrx wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-33-generic.efi.signed 
root=UUID=4f05c2b3-c971-4bf8-bcb6-a76d60b68e45 ro quiet splash 
video.use_native_backlight=1 intremap=no_x2apic_optout vt.handoff=7
  ProcVersionSignature: Ubuntu 3.19.0-33.38~14.04.1-generic 3.19.8-ckt7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-33-generic N/A
   linux-backports-modules-3.19.0-33-generic  N/A
   linux-firmware 1.127.18
  Tags:  trusty
  Uname: Linux 3.19.0-33-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm audio cdrom dialout dip fax floppy fuse lpadmin netdev 
plugdev sambashare scanner sudo tape video
  _MarkForUpload: True
  dmi.bios.date: 10/12/2015
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A06
  dmi.board.name: 0YDTG3
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A02
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: A06
  dmi.modalias: 
dmi:bvnDellInc.:bvrA06:bd10/12/2015:svnDellInc.:pnInspiron5548:pvrA06:rvnDellInc.:rn0YDTG3:rvrA02:cvnDellInc.:ct8:cvrA06:
  dmi.product.name: Inspiron 5548
  dmi.product.version: A06
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520040/+subscriptions

-- 
Mailing list: 

[Kernel-packages] [Bug 1503541] Re: kern.log flooded with "[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!"

2015-12-20 Thread Dara Adib
*** This bug is a duplicate of bug 1488719 ***
https://bugs.launchpad.net/bugs/1488719

** This bug has been marked a duplicate of bug 1488719
   dmesg shows "[drm:gen8_irq_handler [i915]] *ERROR* The master control 
interrupt lied (SDE)!"

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1503541

Title:
  kern.log flooded with "[drm:gen8_irq_handler [i915_bpo]] *ERROR* The
  master control interrupt lied (SDE)!"

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On an intel i5 toshiba laptop on vivid. Upgraded to the
  3.19.0-30-generic kernel and started seeing this. Additionally, bootup
  was slow.

  kern.log/dmesg is flooded with this output

  [   69.070503] [drm:gen8_irq_handler [i915_bpo]] *ERROR* The master
  control interrupt lied (SDE)!

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-30-generic 3.19.0-30.34
  ProcVersionSignature: Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6
  Uname: Linux 3.19.0-30-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  wolsen 2493 F pulseaudio
   /dev/snd/controlC1:  wolsen 2493 F pulseaudio
  CurrentDesktop: Unity
  Date: Tue Oct  6 22:30:20 2015
  HibernationDevice: RESUME=UUID=096b9e95-621b-4cc7-a10c-250149e1b48b
  InstallationDate: Installed on 2015-07-15 (83 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  MachineType: TOSHIBA Satellite E45-B
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-30-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro noprompt quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-30-generic N/A
   linux-backports-modules-3.19.0-30-generic  N/A
   linux-firmware 1.143.3
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/12/2015
  dmi.bios.vendor: INSYDE Corp.
  dmi.bios.version: 1.10
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: CA10CU
  dmi.board.vendor: TOSHIBA
  dmi.board.version: 2.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: OEM Chassis ManuFacturer
  dmi.chassis.version: OEM Chassis Version
  dmi.modalias: 
dmi:bvnINSYDECorp.:bvr1.10:bd01/12/2015:svnTOSHIBA:pnSatelliteE45-B:pvrPSPNAU-001002:rvnTOSHIBA:rnCA10CU:rvr2.0:cvnOEMChassisManuFacturer:ct10:cvrOEMChassisVersion:
  dmi.product.name: Satellite E45-B
  dmi.product.version: PSPNAU-001002
  dmi.sys.vendor: TOSHIBA

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1503541/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1516215] Re: kernel 4.x has issues with lite-on sata controller in dell xps 13 (2015)

2015-12-20 Thread Carolin Latze
I think this second issue is somehow related to virtualbox. Will file a
bug once I have more data points. The first problem remains though. Any
news about this?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1516215

Title:
   kernel 4.x has issues with lite-on sata controller in dell xps 13
  (2015)

Status in linux package in Ubuntu:
  Triaged

Bug description:
  I have a Dell XPS 13 (2015) which has a Lite-On Sata controller:
  03:00.0 SATA controller: Lite-On Technology Corporation Device 0224 (rev 10)

  Right from the beginning, I have issues with that one under Linux (not
  Windows). It might happen that the notebook just dies (loosing its
  SSD), or it might not even boot. Whenever it does not boot, it usually
  stops with a message around "job 1 of 12 ..." (I don't find them in
  any logs ). Sometimes when I boot into Windows and then immediately
  reboot into Linux it works. It usually helps to boot a 3.19.x kernel,
  although even that one can have the same issues (although way less
  than 4.x).

  The system almost always crashes completely when I run the dump tool.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-18-generic 4.2.0-18.22
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  latze  1599 F pulseaudio
  CurrentDesktop: XFCE
  Date: Sat Nov 14 09:29:04 2015
  HibernationDevice: RESUME=UUID=b8662265-a1f0-487e-9d85-2731c765b3eb
  InstallationDate: Installed on 2015-08-23 (82 days ago)
  InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 0bda:5682 Realtek Semiconductor Corp.
   Bus 001 Device 003: ID 04f3:20d0 Elan Microelectronics Corp.
   Bus 001 Device 002: ID 8087:0a2a Intel Corp.
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Dell Inc. XPS 13 9343
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic.efi.signed 
root=UUID=9e67912b-c59e-47ac-b2f1-3ef39e3d38fb ro debug
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-18-generic N/A
   linux-backports-modules-4.2.0-18-generic  N/A
   linux-firmware1.149.1
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: Upgraded to wily on 2015-10-31 (13 days ago)
  dmi.bios.date: 07/14/2015
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A05
  dmi.board.name: 0310JH
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd07/14/2015:svnDellInc.:pnXPS139343:pvr:rvnDellInc.:rn0310JH:rvrA00:cvnDellInc.:ct9:cvr:
  dmi.product.name: XPS 13 9343
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1516215/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527826] Re: Please enable dmidecode for arm64

2015-12-20 Thread Hans Joachim Desserud
Thanks for reporting.

I found a corresponding bug report in Debian, and from what I can see,
dmidecode 2.12-4 and later are built for arm64. This is available in
Ubuntu 15.10. I don't know how easy it would be to enable this for older
releases, but if you need a fix for the bug in previous versions of
Ubuntu, please perform as much as possible of the SRU Procedure [1] to
bring the need to a developer's attention.

 [1]: https://wiki.ubuntu.com/StableReleaseUpdates#Procedure


** Bug watch added: Debian Bug tracker #767965
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=767965

** Also affects: dmidecode (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=767965
   Importance: Unknown
   Status: Unknown

** Tags added: arm64

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to dmidecode in Ubuntu.
https://bugs.launchpad.net/bugs/1527826

Title:
  Please enable dmidecode for arm64

Status in dmidecode package in Ubuntu:
  New
Status in dmidecode package in Debian:
  Unknown

Bug description:
  ARM64 systems can provide UEFI/SMBIOS interfaces. Please enable
  dmidecode package for ARM64 arch, so that it can be used to read
  SMBIOS data on such systems.

  -- 
  With best wishes
  Dmitry

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dmidecode/+bug/1527826/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1520519] Re: ASUS ROG GL552 TouchPad not detected

2015-12-20 Thread Tejin Cai
I fresh installed Linux Mint 17.3 Mate and yet the touchpad remains
unfunctional. When you installed Linux, do you have to change any of the
BIOS settings?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1520519

Title:
  ASUS ROG GL552 TouchPad not detected

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Laptop Model  : ASUS ROG GL552 DH71
  First Appearance : Got laptop yesterday. dual booted with ubuntu 14.04. 
Touchpad never detected.
  Manufacturer : ASUS ( as listed under windows 10 )

  * xinput list *

  ⎡ Virtual core pointerid=2[master pointer  (3)]
  ⎜   ↳ Virtual core XTEST pointer  id=4[slave  pointer 
 (2)]
  ⎜   ↳ Logitech USB Optical Mouse  id=10   [slave  pointer 
 (2)]
  ⎣ Virtual core keyboard   id=3[master keyboard (2)]
  ↳ Virtual core XTEST keyboard id=5[slave  
keyboard (3)]
  ↳ Power Buttonid=6[slave  
keyboard (3)]
  ↳ Power Buttonid=7[slave  
keyboard (3)]
  ↳ Logitech USB Keyboard   id=8[slave  
keyboard (3)]
  ↳ Logitech USB Keyboard   id=9[slave  
keyboard (3)]

  * List of devices *
  : Bus=0019 Vendor= Product=0005 Version=
  N: Name="Lid Switch"
  P: Phys=PNP0C0D/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
  U: Uniq=
  H: Handlers=event0 
  B: PROP=0
  B: EV=21
  B: SW=1

  I: Bus=0019 Vendor= Product=0003 Version=
  N: Name="Sleep Button"
  P: Phys=PNP0C0E/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  U: Uniq=
  H: Handlers=kbd event1 
  B: PROP=0
  B: EV=3
  B: KEY=4000 0 0

  I: Bus=0019 Vendor= Product=0001 Version=
  N: Name="Power Button"
  P: Phys=LNXPWRBN/button/input0
  S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  U: Uniq=
  H: Handlers=kbd event2 
  B: PROP=0
  B: EV=3
  B: KEY=10 0

  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
  N: Name="AT Translated Set 2 keyboard"
  P: Phys=isa0060/serio0/input0
  S: Sysfs=/devices/platform/i8042/serio0/input/input3
  U: Uniq=
  H: Handlers=sysrq kbd event3 
  B: PROP=0
  B: EV=120013
  B: KEY=40200 3803078f800d001 fedfffef fffe
  B: MSC=10
  B: LED=7

  I: Bus=0003 Vendor=046d Product=c05a Version=0111
  N: Name="Logitech USB Optical Mouse"
  P: Phys=usb-:00:14.0-1/input0
  S: 
Sysfs=/devices/pci:00/:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05A.0001/input/input4
  U: Uniq=
  H: Handlers=mouse0 event4 
  B: PROP=0
  B: EV=17
  B: KEY=7 0 0 0 0
  B: REL=103
  B: MSC=10

  I: Bus=0019 Vendor= Product= Version=
  N: Name="Asus WMI hotkeys"
  P: Phys=asus-nb-wmi/input0
  S: Sysfs=/devices/platform/asus-nb-wmi/input/input5
  U: Uniq=
  H: Handlers=rfkill kbd event5 
  B: PROP=0
  B: EV=100013
  B: KEY=8 0 8000 0 0 a1606f0090 8200027800501000 e 0
  B: MSC=10

  I: Bus=0019 Vendor= Product=0006 Version=
  N: Name="Video Bus"
  P: Phys=LNXVIDEO/video/input0
  S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
  U: Uniq=
  H: Handlers=kbd event6 
  B: PROP=0
  B: EV=3
  B: KEY=3e000b 0 0 0

  I: Bus=0019 Vendor= Product=0006 Version=
  N: Name="Video Bus"
  P: Phys=LNXVIDEO/video/input0
  S: 
Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input7
  U: Uniq=
  H: Handlers=kbd event7 
  B: PROP=0
  B: EV=3
  B: KEY=3e000b 0 0 0

  I: Bus=0003 Vendor=04f2 Product=b424 Version=6969
  N: Name="USB2.0 HD UVC WebCam"
  P: Phys=usb-:00:14.0-4/button
  S: Sysfs=/devices/pci:00/:00:14.0/usb1/1-4/1-4:1.0/input/input8
  U: Uniq=
  H: Handlers=kbd event8 
  B: PROP=0
  B: EV=3
  B: KEY=10 0 0 0

  I: Bus= Vendor= Product= Version=
  N: Name="HDA Intel PCH Mic"
  P: Phys=ALSA
  S: Sysfs=/devices/pci:00/:00:1f.3/sound/card0/input9
  U: Uniq=
  H: Handlers=event9 
  B: PROP=0
  B: EV=21
  B: SW=10

  I: Bus= Vendor= Product= Version=
  N: Name="HDA Intel PCH Headphone"
  P: Phys=ALSA
  S: Sysfs=/devices/pci:00/:00:1f.3/sound/card0/input10
  U: Uniq=
  H: Handlers=event10 
  B: PROP=0
  B: EV=21
  B: SW=4

  I: Bus= Vendor= Product= Version=
  N: Name="HDA Intel PCH HDMI/DP,pcm=3"
  P: Phys=ALSA
  S: Sysfs=/devices/pci:00/:00:1f.3/sound/card0/input11
  U: Uniq=
  H: Handlers=event11 
  B: PROP=0
  B: EV=21
  B: SW=140

  
  please find Xorg.log attached.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sameer 1813 F pulseaudio
  DistroRelease: Ubuntu 14.04
  HibernationDevice: 

[Kernel-packages] [Bug 1527491] [NEW] QinHeng Electronics HL-340 USB-Serial adapter

2015-12-20 Thread Launchpad Bug Tracker
You have been subscribed to a public bug:

USB serial adapter detected but not working.

$ lsusb
Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter


$ ls /dev/ttyU*
/dev/ttyUSB0

>From syslog
Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new full-speed 
USB device number 126 using xhci_hcd
Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB device 
found, idVendor=1a86, idProduct=7523
Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB device 
strings: Mfr=0, Product=2, SerialNumber=0
Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device


$ uname -a
Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon Nov 
2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux


Google search
http://comments.gmane.org/gmane.linux.usb.general/121851
https://bugzilla.redhat.com/show_bug.cgi?id=1235715
http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works

** Affects: linux-meta (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: serial usb
-- 
QinHeng Electronics HL-340 USB-Serial adapter
https://bugs.launchpad.net/bugs/1527491
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux-meta in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527491] Re: QinHeng Electronics HL-340 USB-Serial adapter

2015-12-20 Thread Pieter
** Package changed: btrfs (Ubuntu) => linux-meta (Ubuntu)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux-meta package in Ubuntu:
  New

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527491] Re: QinHeng Electronics HL-340 USB-Serial adapter

2015-12-20 Thread Brad Figg
** Package changed: linux-meta (Ubuntu) => linux (Ubuntu)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux package in Ubuntu:
  New

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527491] Missing required logs.

2015-12-20 Thread Brad Figg
This bug is missing log files that will aid in diagnosing the problem.
>From a terminal window please run:

apport-collect 1527491

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527404] onza (i386) - tests ran: 153, failed: 0

2015-12-20 Thread Brad Figg
tests ran: 153, failed: 0;
  
http://kernel.ubuntu.com/testing/3.13.0-74.118/onza__3.13.0-74.118__2015-12-20_07-09-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527404

Title:
  linux: 3.13.0-74.118 -proposed tracker

Status in Kernel SRU Workflow:
  Fix Released
Status in Kernel SRU Workflow automated-testing series:
  Fix Released
Status in Kernel SRU Workflow certification-testing series:
  Invalid
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-security series:
  Fix Released
Status in Kernel SRU Workflow promote-to-updates series:
  Fix Released
Status in Kernel SRU Workflow regression-testing series:
  Fix Released
Status in Kernel SRU Workflow security-signoff series:
  Fix Released
Status in Kernel SRU Workflow verification-testing series:
  Fix Released
Status in linux package in Ubuntu:
  New
Status in linux source package in Trusty:
  Fix Released

Bug description:
  This bug is for tracking the 3.13.0-74.118 upload package. This bug
  will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Thursday, 17. December 2015 22:24 UTC
  kernel-stable-Prepare-package-end:Friday, 18. December 2015 06:03 UTC
  kernel-stable-Promote-to-proposed-start:Friday, 18. December 2015 06:03 UTC
  kernel-stable-Promote-to-proposed-end:Friday, 18. December 2015 16:14 UTC
  kernel-stable-Security-signoff-end:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Verification-testing-start:Friday, 18. December 2015 18:02 UTC
  kernel-stable-Certification-testing-start:Friday, 18. December 2015 18:03 UTC
  proposed-announcement-sent:True
  kernel-stable-Regression-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Promote-to-updates-start:Friday, 18. December 2015 18:27 UTC
  kernel-stable-Certification-testing-end:Friday, 18. December 2015 18:27 UTC
  kernel-stable-Regression-testing-end:Friday, 18. December 2015 18:27 UTC
  kernel-stable-Promote-to-updates-end:Friday, 18. December 2015 19:59 UTC
  kernel-stable-phase:Released
  kernel-stable-phase-changed:Friday, 18. December 2015 21:02 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1527404/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1375995] Re: [HP Compaq dc7800 Small Form Factor PC] suspend/resume failure

2015-12-20 Thread Urs Fleisch
Since Ubuntu 15.10, we have a regression: Suspend to RAM never works,
the workaround with first suspending to disk no longer works. I have
tested this with both the current Ubuntu kernel (4.2.0-22-generic
#27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 2015 x86_64 x86_64 x86_64
GNU/Linux) and the latest kernel from http://kernel.ubuntu.com/~kernel-
ppa/mainline/v4.4-rc5-wily/ (4.4.0-040400rc5.201512140221).

With Arch Linux on the same machine, suspend to RAM works after
hibernate, so this looks like a regression introduced with Ubuntu Wily.
What has changed with suspend-resume from 15.04 to 15.10?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1375995

Title:
  [HP Compaq dc7800 Small Form Factor PC] suspend/resume failure

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Suspend to RAM fails on HP Compaq dc7800p, the PC will not wake up
  again. It only works if I suspend to disk before, then I can suspend
  to RAM afterwards (as many time as needed) until the PC is rebooted
  again.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.10
  Package: linux-image-3.16.0-18-generic 3.16.0-18.25
  ProcVersionSignature: Ubuntu 3.16.0-18.25-generic 3.16.3
  Uname: Linux 3.16.0-18-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  urs1849 F lxpanel
  CRDA: Error: [Errno 2] No such file or directory: 'iw'
  Date: Tue Sep 30 20:44:46 2014
  DuplicateSignature: suspend/resume:Hewlett-Packard HP Compaq dc7800p Small 
Form Factor:786F1 v01.32
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=c338e9df-bc69-4692-b108-88cfd64982a7
  InstallationDate: Installed on 2014-09-28 (2 days ago)
  InstallationMedia: Lubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140923)
  InterpreterPath: /usr/bin/python3.4
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: Hewlett-Packard HP Compaq dc7800p Small Form Factor
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-18-generic 
root=UUID=6475de33-f0cf-4e4a-b155-bac5d4c61b27 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-18-generic N/A
   linux-backports-modules-3.16.0-18-generic  N/A
   linux-firmware 1.134
  RfKill:
   
  SourcePackage: linux
  Title: [Hewlett-Packard HP Compaq dc7800p Small Form Factor] suspend/resume 
failure
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 07/21/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786F1 v01.32
  dmi.board.asset.tag: CZC81885DS
  dmi.board.name: 0AA8h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: CZC81885DS
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr786F1v01.32:bd07/21/2011:svnHewlett-Packard:pnHPCompaqdc7800pSmallFormFactor:pvr:rvnHewlett-Packard:rn0AA8h:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP Compaq dc7800p Small Form Factor
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1375995/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527409] onza (amd64) - tests ran: 180, failed: 2

2015-12-20 Thread Brad Figg
tests ran: 180, failed: 2;
  
http://kernel.ubuntu.com/testing/3.16.0-57.77~14.04.1/onza__3.16.0-57.77~14.04.1__2015-12-20_09-55-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1527409

Title:
  linux-lts-utopic: 3.16.0-57.77~14.04.1 -proposed tracker

Status in Kernel SRU Workflow:
  Fix Released
Status in Kernel SRU Workflow automated-testing series:
  Fix Released
Status in Kernel SRU Workflow certification-testing series:
  Invalid
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-security series:
  Fix Released
Status in Kernel SRU Workflow promote-to-updates series:
  Fix Released
Status in Kernel SRU Workflow regression-testing series:
  Fix Released
Status in Kernel SRU Workflow security-signoff series:
  Fix Released
Status in Kernel SRU Workflow verification-testing series:
  Fix Released
Status in linux-lts-utopic package in Ubuntu:
  New
Status in linux-lts-utopic source package in Trusty:
  Fix Released

Bug description:
  This bug is for tracking the 3.16.0-57.77~14.04.1 upload package. This
  bug will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Thursday, 17. December 2015 23:02 UTC
  kernel-stable-Prepare-package-end:Friday, 18. December 2015 09:51 UTC
  kernel-stable-Promote-to-proposed-start:Friday, 18. December 2015 09:51 UTC
  kernel-stable-Promote-to-proposed-end:Friday, 18. December 2015 16:14 UTC
  kernel-stable-Verification-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Certification-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Security-signoff-start:Friday, 18. December 2015 18:03 UTC
  proposed-announcement-sent:True
  kernel-stable-Regression-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Promote-to-updates-start:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Security-signoff-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Certification-testing-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Regression-testing-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Promote-to-updates-end:Friday, 18. December 2015 19:59 UTC
  kernel-stable-phase:Released
  kernel-stable-phase-changed:Friday, 18. December 2015 21:02 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1527409/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527855] Re: package linux-image-3.19.0-41-generic 3.19.0-41.46~14.04.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2

2015-12-20 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux-lts-vivid (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-vivid in Ubuntu.
https://bugs.launchpad.net/bugs/1527855

Title:
  package linux-image-3.19.0-41-generic 3.19.0-41.46~14.04.2 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 2

Status in linux-lts-vivid package in Ubuntu:
  Confirmed

Bug description:
  An error message came up about trying to install the linux image
  automatically. I don't know how the automatic installation is setup.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.19.0-41-generic 3.19.0-41.46~14.04.2
  ProcVersionSignature: Ubuntu 3.19.0-39.44~14.04.1-generic 3.19.8-ckt9
  Uname: Linux 3.19.0-39-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  Date: Sat Dec 19 05:59:02 2015
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 2
  InstallationDate: Installed on 2015-09-20 (89 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: linux-lts-vivid
  Title: package linux-image-3.19.0-41-generic 3.19.0-41.46~14.04.2 failed to 
install/upgrade: subprocess installed post-installation script returned error 
exit status 2
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-vivid/+bug/1527855/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1375995] Re: [HP Compaq dc7800 Small Form Factor PC] suspend/resume failure

2015-12-20 Thread Christopher M. Penalver
Urs Fleisch, to advise, the scope of this report is only suspend not
working when one attempts to use it the first time.

Despite this, the issue you are reporting is an upstream one. Could you
please report this problem following the instructions verbatim at
https://wiki.ubuntu.com/Bugs/Upstream/kernel to the appropriate mailing
list? Given the root cause driver hasn't been identified, it wouldn't
hurt to report this to linux-pm to see if they can provide additional
suggestions.

Please provide a direct URL to your post to the mailing list when it
becomes available so that it may be tracked.

Thank you for your understanding.

** Tags added: kernel-bug-exists-upstream-4.4-rc5

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1375995

Title:
  [HP Compaq dc7800 Small Form Factor PC] suspend/resume failure

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Suspend to RAM fails on HP Compaq dc7800p, the PC will not wake up
  again. It only works if I suspend to disk before, then I can suspend
  to RAM afterwards (as many time as needed) until the PC is rebooted
  again.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.10
  Package: linux-image-3.16.0-18-generic 3.16.0-18.25
  ProcVersionSignature: Ubuntu 3.16.0-18.25-generic 3.16.3
  Uname: Linux 3.16.0-18-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  urs1849 F lxpanel
  CRDA: Error: [Errno 2] No such file or directory: 'iw'
  Date: Tue Sep 30 20:44:46 2014
  DuplicateSignature: suspend/resume:Hewlett-Packard HP Compaq dc7800p Small 
Form Factor:786F1 v01.32
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=c338e9df-bc69-4692-b108-88cfd64982a7
  InstallationDate: Installed on 2014-09-28 (2 days ago)
  InstallationMedia: Lubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140923)
  InterpreterPath: /usr/bin/python3.4
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: Hewlett-Packard HP Compaq dc7800p Small Form Factor
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-18-generic 
root=UUID=6475de33-f0cf-4e4a-b155-bac5d4c61b27 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-18-generic N/A
   linux-backports-modules-3.16.0-18-generic  N/A
   linux-firmware 1.134
  RfKill:
   
  SourcePackage: linux
  Title: [Hewlett-Packard HP Compaq dc7800p Small Form Factor] suspend/resume 
failure
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 07/21/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786F1 v01.32
  dmi.board.asset.tag: CZC81885DS
  dmi.board.name: 0AA8h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: CZC81885DS
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr786F1v01.32:bd07/21/2011:svnHewlett-Packard:pnHPCompaqdc7800pSmallFormFactor:pvr:rvnHewlett-Packard:rn0AA8h:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP Compaq dc7800p Small Form Factor
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1375995/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527914] Re: Huawei E3372 is not detected and cannot be used

2015-12-20 Thread Christopher M. Penalver
Mikaela Suomalainen, to confirm this is a kernel regression, if you
personally (not someone else) boot into a kernel from Precise, is this
problem still reproducible? Instructions for this may be found at
https://wiki.ubuntu.com/Kernel/KernelBisection#Bisecting_Ubuntu_kernel_versions
.


** Tags added: kernel-bug-exists-upstream kernel-bug-exists-upstream-4.4-rc5

** Tags added: regression-potential

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527914

Title:
  Huawei E3372 is not detected and cannot be used

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I believe this is duplicate of bug #1424181. It does appear in
  lsb_usb, but networkmanager doesn't react to it or give me option to
  connect using it.

  I have been able to reproduce this with mainstream kernel as seen in
  the bug #1424181.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mikaela1352 F pulseaudio
   /dev/snd/controlC1:  mikaela1352 F pulseaudio
  CurrentDesktop: MATE
  Date: Sat Dec 19 20:35:36 2015
  HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
  InstallationDate: Installed on 2015-12-12 (7 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151212)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
   Bus 001 Device 002: ID 13d3:3414 IMC Networks 
   Bus 001 Device 006: ID 12d1:14dc Huawei Technologies Co., Ltd. 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: ASUSTeK COMPUTER INC. X550JX
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   linux-backports-modules-4.3.0-2-generic  N/A
   linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/07/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X550JX.204
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X550JX
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX550JX.204:bd05/07/2015:svnASUSTeKCOMPUTERINC.:pnX550JX:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550JX:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X550JX
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527914/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1526683] Re: rtl8821ae has no connection on 5GHz networks and loses connection occassionally on 2.4 GHz networks requiring hardware button to be toggled twice for connection to

2015-12-20 Thread Christopher M. Penalver
Mikaela Suomalainen, to better scope this report, let it be focused on
only the 2.4GHz issue, as two different frequency issues are treated as
different problems upstream, necessitating separate reports.

Despite this, could you please comment if this is reproducible on both
802.11n (300 or 150), and 802.11g?

Also, could you please post the results of the following terminal command:
iwconfig

** Summary changed:

- rtl8821ae has no connection on 5GHz networks and loses connection 
occassionally on 2.4 GHz networks requiring hardware button to be toggled twice 
for connection to be re-established
+ 10ec:8821 rtl8821ae loses connection occasionally on 2.4 GHz network 
requiring hardware button to be toggled twice for connection to be 
re-established

** Description changed:

- rtl8821ae has no connection on 5GHz networks and loses connection
- occassionally on 2.4 GHz networks requiring hardware button to be
- toggled twice for connection to be re-established
- 
- I am not fully sure that this is the right package to report this bug
- against, but it's the best idea I have and no one replied when I asked
- where I should report this on two IRC channels.
- 
- I took the name of driver from inxi:
- 
- 
- ```
- Network:   Card-1 ♥ Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter
-driver ♥ rtl8821ae port ♥ d000
-bus-ID ♥ 03:00.0 chip-ID ♥ 10ec:8821
-Card-2 ♥ Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
Controller
-driver ♥ r8169 v ♥ 2.3LK-NAPI port ♥ c000
-bus-ID ♥ 04:00.1 chip-ID ♥ 10ec:8168
- ```
+ rtl8821ae loses connection occasionally on 2.4 GHz networks requiring
+ hardware button to be toggled twice for connection to be re-established.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC0:  mikaela1361 F pulseaudio
-  /dev/snd/controlC1:  mikaela1361 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  mikaela1361 F pulseaudio
+  /dev/snd/controlC1:  mikaela1361 F pulseaudio
  CurrentDesktop: MATE
  Date: Wed Dec 16 11:35:09 2015
  HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
  InstallationDate: Installed on 2015-12-12 (3 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151212)
  Lsusb:
-  Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
-  Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
-  Bus 001 Device 006: ID 13d3:3414 IMC Networks 
-  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+  Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
+  Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp.
+  Bus 001 Device 006: ID 13d3:3414 IMC Networks
+  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: ASUSTeK COMPUTER INC. X550JX
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
  RelatedPackageVersions:
-  linux-restricted-modules-4.3.0-2-generic N/A
-  linux-backports-modules-4.3.0-2-generic  N/A
-  linux-firmware   1.154
+  linux-restricted-modules-4.3.0-2-generic N/A
+  linux-backports-modules-4.3.0-2-generic  N/A
+  linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/07/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X550JX.204
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X550JX
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX550JX.204:bd05/07/2015:svnASUSTeKCOMPUTERINC.:pnX550JX:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550JX:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X550JX
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1526683

Title:
  10ec:8821 rtl8821ae loses connection occasionally on 2.4 GHz network
  requiring hardware button to be toggled twice for connection to be re-
  established

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  rtl8821ae loses connection occasionally on 2.4 GHz networks requiring
  hardware button to be 

[Kernel-packages] [Bug 1526683] Re: 10ec:8821 rtl8821ae loses connection occasionally on 2.4 GHz network requiring hardware button to be toggled twice for connection to be re-established

2015-12-20 Thread Mikaela Suomalainen
I personally have no need of the 2.4 GHz network as there are 15
overlapping APs while 5GHz is only for me.

I have no idea how I could test which standards have the issue.

```
enp4s0f1  no wireless extensions.

lono wireless extensions.

wlp3s0IEEE 802.11abgn  ESSID:"Bahamut_optout_nomap"  
  Mode:Managed  Frequency:2.472 GHz  Access Point: 30:5A:3A:68:92:70   
  Bit Rate=72.2 Mb/s   Tx-Power=20 dBm   
  Retry short limit:7   RTS thr=2347 B   Fragment thr:off
  Power Management:off
  Link Quality=70/70  Signal level=-32 dBm  
  Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
  Tx excessive retries:0  Invalid misc:1954   Missed beacon:0
```

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1526683

Title:
  10ec:8821 rtl8821ae loses connection occasionally on 2.4 GHz network
  requiring hardware button to be toggled twice for connection to be re-
  established

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  rtl8821ae loses connection occasionally on 2.4 GHz networks requiring
  hardware button to be toggled twice for connection to be re-
  established.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mikaela1361 F pulseaudio
   /dev/snd/controlC1:  mikaela1361 F pulseaudio
  CurrentDesktop: MATE
  Date: Wed Dec 16 11:35:09 2015
  HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
  InstallationDate: Installed on 2015-12-12 (3 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151212)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp.
   Bus 001 Device 006: ID 13d3:3414 IMC Networks
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: ASUSTeK COMPUTER INC. X550JX
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   linux-backports-modules-4.3.0-2-generic  N/A
   linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/07/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X550JX.204
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X550JX
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX550JX.204:bd05/07/2015:svnASUSTeKCOMPUTERINC.:pnX550JX:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550JX:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X550JX
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1528005] Status changed to Confirmed

2015-12-20 Thread Brad Figg
This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528005

Title:
  rtl8821ae has no connectivity in 5GHz networks

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Bug exists in mainline kernel. Originally reported as part of
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683 being the
  more important part, but it was removed and that issue moved to only
  not-so-important 2.4GHz connection disappearing which could be more
  important to me if there weren't 15 overlapping APs.

  I get IP address and everything, but no connectivity. I cannot ping
  even the router. Possibly more details at
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mikaela1567 F pulseaudio
   /dev/snd/controlC1:  mikaela1567 F pulseaudio
  CurrentDesktop: MATE
  Date: Sun Dec 20 16:01:13 2015
  HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
  InstallationDate: Installed on 2015-12-12 (7 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151212)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
   Bus 001 Device 006: ID 13d3:3414 IMC Networks 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: ASUSTeK COMPUTER INC. X550JX
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   linux-backports-modules-4.3.0-2-generic  N/A
   linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/07/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X550JX.204
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X550JX
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX550JX.204:bd05/07/2015:svnASUSTeKCOMPUTERINC.:pnX550JX:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550JX:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X550JX
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1528005/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527409] onza (i386) - tests ran: 153, failed: 0

2015-12-20 Thread Brad Figg
tests ran: 153, failed: 0;
  
http://kernel.ubuntu.com/testing/3.16.0-57.77~14.04.1/onza__3.16.0-57.77~14.04.1__2015-12-20_12-46-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1527409

Title:
  linux-lts-utopic: 3.16.0-57.77~14.04.1 -proposed tracker

Status in Kernel SRU Workflow:
  Fix Released
Status in Kernel SRU Workflow automated-testing series:
  Fix Released
Status in Kernel SRU Workflow certification-testing series:
  Invalid
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-security series:
  Fix Released
Status in Kernel SRU Workflow promote-to-updates series:
  Fix Released
Status in Kernel SRU Workflow regression-testing series:
  Fix Released
Status in Kernel SRU Workflow security-signoff series:
  Fix Released
Status in Kernel SRU Workflow verification-testing series:
  Fix Released
Status in linux-lts-utopic package in Ubuntu:
  New
Status in linux-lts-utopic source package in Trusty:
  Fix Released

Bug description:
  This bug is for tracking the 3.16.0-57.77~14.04.1 upload package. This
  bug will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Thursday, 17. December 2015 23:02 UTC
  kernel-stable-Prepare-package-end:Friday, 18. December 2015 09:51 UTC
  kernel-stable-Promote-to-proposed-start:Friday, 18. December 2015 09:51 UTC
  kernel-stable-Promote-to-proposed-end:Friday, 18. December 2015 16:14 UTC
  kernel-stable-Verification-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Certification-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Security-signoff-start:Friday, 18. December 2015 18:03 UTC
  proposed-announcement-sent:True
  kernel-stable-Regression-testing-start:Friday, 18. December 2015 18:03 UTC
  kernel-stable-Promote-to-updates-start:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Security-signoff-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Certification-testing-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Regression-testing-end:Friday, 18. December 2015 18:29 UTC
  kernel-stable-Promote-to-updates-end:Friday, 18. December 2015 19:59 UTC
  kernel-stable-phase:Released
  kernel-stable-phase-changed:Friday, 18. December 2015 21:02 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1527409/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527825] Re: Dell Latitude 7350 - Audio Broken

2015-12-20 Thread Christopher M. Penalver
** Tags added: wily

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527825

Title:
  Dell Latitude 7350 - Audio Broken

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  On a 7350 with Ubuntu 15.04 there is no sound. The results of aplay
  are the following:

   List of PLAYBACK Hardware Devices 
  card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
  card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
  card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0

  When looking in dmesg I receive the following:

  sst-acpi INT3438:00: No matching ASoC machine driver found

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-15-generic 3.19.0-15.15 [modified: 
boot/vmlinuz-3.19.0-15-generic]
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  user   1217 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Dec 18 23:20:57 2015
  HibernationDevice: RESUME=UUID=3dc87a64-48bc-467b-848e-68c10d6e1791
  InstallationDate: Installed on 2015-12-19 (0 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  MachineType: Dell Inc. Latitude 7350
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic 
root=UUID=eb4e1a85-48f2-4cfb-ba10-8db93f6fb225 ro quiet splash 
acpi_backlight=vendor "acpi_osi=!Windows 2013" "acpi_osi=!Windows 
2012GRUB_CMDLINE_LINUX=" vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-15-generic N/A
   linux-backports-modules-3.19.0-15-generic  N/A
   linux-firmware 1.143.7
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 12/16/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A03
  dmi.board.name: 0M5W75
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA03:bd12/16/2014:svnDellInc.:pnLatitude7350:pvr01:rvnDellInc.:rn0M5W75:rvrA00:cvnDellInc.:ct8:cvr:
  dmi.product.name: Latitude 7350
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527825/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1478201] Re: ubuntu couldn't detect nvidia graphic card

2015-12-20 Thread Christopher M. Penalver
Jinchao LIn, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1478201/comments/3
regarding this being fixed with a reinstall. For future reference you
can manage the status of your own bugs by clicking on the current status
in the yellow line and then choosing a new status in the revealed drop
down box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Incomplete => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1478201

Title:
  ubuntu couldn't detect nvidia graphic card

Status in linux package in Ubuntu:
  Invalid

Bug description:
  Dear all,

  I am pretty new to linux system. Recently I am trying to install
  Nvidia's Cuda framework, which requires the Nvidia's graphic card.

  I have tried several solutions described in many posts, like:
  
http://askubuntu.com/questions/519372/ubuntu-and-asus-g750jm-gtx860m-nvidia-problems,
 
  
http://askubuntu.com/questions/162639/how-do-i-get-ubuntu-to-recognize-my-nvidia-graphics-card,
 
  
http://askubuntu.com/questions/523528/why-does-ubuntu-14-04-not-recognize-nvidia-geforce-310m-hardware,
 
  and several else. Unfortunately none of them works for me. 

  My problem here is even trickier than most of the posts, because my
  system can't recognize the model of my graphic card:

  >jinchao@jinchao-laptop:~$ sudo lshw -C display
  [sudo] password for jinchao: 
*-display   
 description: 3D controller
 product: NVIDIA Corporation
 vendor: NVIDIA Corporation
 physical id: 0
 bus info: pci@:01:00.0
 version: a2
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress bus_master cap_list rom
 configuration: driver=nvidia latency=0
 resources: irq:51 memory:d000-d0ff memory:a000-afff 
memory:b000-b1ff ioport:4000(size=128) memory:b200-b207
*-display
 description: VGA compatible controller
 product: 4th Gen Core Processor Integrated Graphics Controller
 vendor: Intel Corporation
 physical id: 2
 bus info: pci@:00:02.0
 version: 06
 width: 64 bits
 clock: 33MHz
 capabilities: msi pm vga_controller bus_master cap_list rom
 configuration: driver=i915 latency=0
 resources: irq:47 memory:d100-d13f memory:c000-cfff 
ioport:5000(size=64)

  
  My laptop is Lenovo Y50 and it has a Nvidia GTX960M graphic card. The system 
I use is Ubuntu 14.04. Can anyone assist me solve this problem? Thanks a lot !

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-44-generic 3.16.0-44.59~14.04.1
  ProcVersionSignature: Ubuntu 3.16.0-44.59~14.04.1-generic 3.16.7-ckt14
  Uname: Linux 3.16.0-44-generic x86_64
  NonfreeKernelModules: nvidia wl
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sat Jul 25 00:26:18 2015
  InstallationDate: Installed on 2015-07-22 (3 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  SourcePackage: linux-lts-utopic
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1478201/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1482187] Re: [147461.082140] BUG: soft lockup - CPU#3 stuck for 22s! [khugepaged:40]

2015-12-20 Thread Christopher M. Penalver
Eric Detheridge, at your earliest convenience, could you please test the
latest upstream kernel available from the very top line at the top of
the page from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D
(the release names are irrelevant for testing, and please do not test
the daily folder)? Install instructions are available at
https://wiki.ubuntu.com/Kernel/MainlineBuilds . This will allow
additional upstream developers to examine the issue.

If testing on your main install would be inconvenient, one may:
1) Install Ubuntu to a different partition and then test this there.
2) Backup, or clone the primary install.

If the latest kernel did not allow you to test to the issue (ex. you couldn't 
boot into the OS) please make a comment in your report about this, and continue 
to test the next most recent kernel version until you can test to the issue. 
Once you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this issue is fixed in the mainline kernel, please 
add the following tags by clicking on the yellow circle with a black pencil 
icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ

Where X, and Y are the first two numbers of the kernel version, and Z is
the release candidate number if it exists.

If the mainline kernel does not fix the issue, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ

Please note, an error to install the kernel does not fit the criteria of
kernel-bug-exists-upstream.

Once testing of the latest upstream kernel is complete, please mark this
report's Status as Confirmed. Please let us know your results.

Thank you for your understanding.

** Tags added: latest-bios-5601

** Attachment removed: "Dependencies.txt"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1482187/+attachment/4440406/+files/Dependencies.txt

** Changed in: linux (Ubuntu)
   Importance: Low => Medium

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1482187

Title:
  [147461.082140] BUG: soft lockup - CPU#3 stuck for 22s!
  [khugepaged:40]

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Happened right after a YouTube video of music finished. mouse and
  keyboard locked up but system monitor applet kept running showing full
  usage of all four cpu cores. tried to log on remotely but this was
  very slow. used htop to see what was using cpu but it showed only
  three cores active with boinc work units as usual conflicting with the
  system monitor applet. eventually htop stopped working. could not find
  excess cpu usage with top either. eventually the system monitor applet
  showed only 50% cpu usage with lots of io waiting. eventually did soft
  reset. cpu is overclocked but has run stable with heavy boinc usage
  for weeks.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-45-generic 3.16.0-45.60~14.04.1
  ProcVersionSignature: Ubuntu 3.16.0-45.60~14.04.1-generic 3.16.7-ckt14
  Uname: Linux 3.16.0-45-generic x86_64
  NonfreeKernelModules: fglrx
  Annotation: Your system might become unstable now and might need to be 
restarted.
  ApportVersion: 2.14.1-0ubuntu3.11
  Architecture: amd64
  Date: Thu Aug  6 06:00:27 2015
  Failure: oops
  InstallationDate: Installed on 2013-02-13 (904 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  SourcePackage: linux-lts-utopic
  Title: [147461.082140] BUG: soft lockup - CPU#3 stuck for 22s! [khugepaged:40]
  UpgradeStatus: Upgraded to trusty on 2014-05-12 (451 days ago)
  --- 
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=5789d1b5-fee2-4f44-8401-ae2633a5a6d9
  InstallationDate: Installed on 2013-02-13 (1040 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: System manufacturer System Product Name
  NonfreeKernelModules: fglrx
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.2.0-21-generic 
root=/dev/mapper/ubuntu-root ro quiet splash nogpumanager vt.handoff=7
  ProcVersionSignature: Ubuntu 4.2.0-21.25~14.04.1-generic 4.2.6
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-21-generic N/A
   linux-backports-modules-4.2.0-21-generic  N/A
   linux-firmware1.127.19
  RfKill:
   
  Tags:  trusty
  Uname: Linux 4.2.0-21-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2014-05-12 (586 days ago)
  UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  _MarkForUpload: True
  dmi.bios.date: 05/22/2014
  dmi.bios.vendor: American Megatrends 

[Kernel-packages] [Bug 1528005] [NEW] rtl8821ae has no connectivity in 5GHz networks

2015-12-20 Thread Mikaela Suomalainen
Public bug reported:

Bug exists in mainline kernel. Originally reported as part of
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683 being the
more important part, but it was removed and that issue moved to only
not-so-important 2.4GHz connection disappearing which could be more
important to me if there weren't 15 overlapping APs.

I get IP address and everything, but no connectivity. I cannot ping even
the router. Possibly more details at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
Uname: Linux 4.3.0-2-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.19.3-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  mikaela1567 F pulseaudio
 /dev/snd/controlC1:  mikaela1567 F pulseaudio
CurrentDesktop: MATE
Date: Sun Dec 20 16:01:13 2015
HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
InstallationDate: Installed on 2015-12-12 (7 days ago)
InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151212)
Lsusb:
 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
 Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
 Bus 001 Device 006: ID 13d3:3414 IMC Networks 
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: ASUSTeK COMPUTER INC. X550JX
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
RelatedPackageVersions:
 linux-restricted-modules-4.3.0-2-generic N/A
 linux-backports-modules-4.3.0-2-generic  N/A
 linux-firmware   1.154
SourcePackage: linux
UdevLog: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/07/2015
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: X550JX.204
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: X550JX
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: ATN12345678901234567
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX550JX.204:bd05/07/2015:svnASUSTeKCOMPUTERINC.:pnX550JX:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550JX:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.name: X550JX
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528005

Title:
  rtl8821ae has no connectivity in 5GHz networks

Status in linux package in Ubuntu:
  New

Bug description:
  Bug exists in mainline kernel. Originally reported as part of
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683 being the
  more important part, but it was removed and that issue moved to only
  not-so-important 2.4GHz connection disappearing which could be more
  important to me if there weren't 15 overlapping APs.

  I get IP address and everything, but no connectivity. I cannot ping
  even the router. Possibly more details at
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mikaela1567 F pulseaudio
   /dev/snd/controlC1:  mikaela1567 F pulseaudio
  CurrentDesktop: MATE
  Date: Sun Dec 20 16:01:13 2015
  HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
  InstallationDate: Installed on 2015-12-12 (7 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151212)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp. 
   Bus 001 Device 006: ID 13d3:3414 IMC Networks 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: ASUSTeK COMPUTER INC. X550JX
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   linux-backports-modules-4.3.0-2-generic  N/A
   linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Tiedostoa tai 

[Kernel-packages] [Bug 1528007] [NEW] bcmwl driver locks up system

2015-12-20 Thread Miek Gieben
Public bug reported:

Hardware:

% lspci |grep -i BCM
03:00.0 Network controller: Broadcom Corporation BCM4360 802.11ac Wireless 
Network Adapter (rev 03)

% dmesg|grep BCM
[6.143332] Bluetooth: hci0: BCM: Read verbose config info failed (-16)
[ 1676.017551] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 
6.30.223.248 (r487574)

I sometimes see weird lockup in the kernel:
 1778.501345] WARNING: CPU: 3 PID: 6455 at 
/build/linux-jHWiKd/linux-3.13.0/kernel/watchdog.c:24
5 watchdog_overflow_callback+0x9c/0xd0()
[ 1778.501347] Watchdog detected hard LOCKUP on cpu 3

This happens with kernel 3.19 *and* kernel 4.2. Unloading the `wl`
module makes the system more stable, so it's def. this module.

** Affects: bcmwl (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1528007

Title:
  bcmwl driver locks up system

Status in bcmwl package in Ubuntu:
  New

Bug description:
  Hardware:

  % lspci |grep -i BCM
  03:00.0 Network controller: Broadcom Corporation BCM4360 802.11ac Wireless 
Network Adapter (rev 03)

  % dmesg|grep BCM
  [6.143332] Bluetooth: hci0: BCM: Read verbose config info failed (-16)
  [ 1676.017551] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 
6.30.223.248 (r487574)

  I sometimes see weird lockup in the kernel:
   1778.501345] WARNING: CPU: 3 PID: 6455 at 
/build/linux-jHWiKd/linux-3.13.0/kernel/watchdog.c:24
  5 watchdog_overflow_callback+0x9c/0xd0()
  [ 1778.501347] Watchdog detected hard LOCKUP on cpu 3

  This happens with kernel 3.19 *and* kernel 4.2. Unloading the `wl`
  module makes the system more stable, so it's def. this module.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1528007/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1526683] Re: 10ec:8821 rtl8821ae loses connection occasionally on 2.4 GHz network requiring hardware button to be toggled twice for connection to be re-established

2015-12-20 Thread Christopher M. Penalver
Mikaela Suomalainen:
>"I personally have no need of the 2.4 GHz network as there are 15 overlapping 
>APs while 5GHz is only for me."

Then you would want to file a new report about the 5GHz issue via a terminal:
ubuntu-bug linux

Please feel free to subscribe me to it.

>"I have no idea how I could test which standards have the issue."

One would need to log into the router and confirm what it is
broadcasting. However, by looking at your iwconfig Bit Rate you are
using 802.11n. Hence, in order to narrow this down, could you please
switch the router to 802.11g only to confirm if there is an improvement?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1526683

Title:
  10ec:8821 rtl8821ae loses connection occasionally on 2.4 GHz network
  requiring hardware button to be toggled twice for connection to be re-
  established

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  rtl8821ae loses connection occasionally on 2.4 GHz networks requiring
  hardware button to be toggled twice for connection to be re-
  established.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11 [modified: 
boot/vmlinuz-4.3.0-2-generic]
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mikaela1361 F pulseaudio
   /dev/snd/controlC1:  mikaela1361 F pulseaudio
  CurrentDesktop: MATE
  Date: Wed Dec 16 11:35:09 2015
  HibernationDevice: RESUME=UUID=431ec214-73ef-4058-b283-5721bb5a45d2
  InstallationDate: Installed on 2015-12-12 (3 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151212)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0bda:57b4 Realtek Semiconductor Corp.
   Bus 001 Device 006: ID 13d3:3414 IMC Networks
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: ASUSTeK COMPUTER INC. X550JX
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-2-generic.efi.signed 
root=UUID=ab0e7270-40bc-4a68-a541-59fd96690354 ro rw acpi_osi=
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   linux-backports-modules-4.3.0-2-generic  N/A
   linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/07/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: X550JX.204
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: X550JX
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: ATN12345678901234567
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrX550JX.204:bd05/07/2015:svnASUSTeKCOMPUTERINC.:pnX550JX:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX550JX:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: X550JX
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1526683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527491] Re: QinHeng Electronics HL-340 USB-Serial adapter

2015-12-20 Thread Pieter
CentOS reference to serial problems with same device.
https://www.centos.org/forums/viewtopic.php?t=7369

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1527491] Re: QinHeng Electronics HL-340 USB-Serial adapter

2015-12-20 Thread Pieter
2012 ubuntuforum, same device, worked and then stopped after a upgrade.
http://ubuntuforums.org/archive/index.php/t-1923883.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1527491

Title:
  QinHeng Electronics HL-340 USB-Serial adapter

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  USB serial adapter detected but not working.

  $ lsusb
  Bus 001 Device 125: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

  
  $ ls /dev/ttyU*
  /dev/ttyUSB0

  From syslog
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.018937] usb 1-1: new 
full-speed USB device number 126 using xhci_hcd
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183954] usb 1-1: New USB 
device found, idVendor=1a86, idProduct=7523
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183959] usb 1-1: New USB 
device strings: Mfr=0, Product=2, SerialNumber=0
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.183962] usb 1-1: Product: 
USB2.0-Ser!
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.184731] ch341 1-1:1.0: 
ch341-uart converter detected
  Dec 18 09:35:23 pieter-ThinkPad kernel: [487228.185569] usb 1-1: ch341-uart 
converter now attached to ttyUSB0
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: checking bus 1, device 126: 
"/sys/devices/pci:00/:00:14.0/usb1/1-1"
  Dec 18 09:35:23 pieter-ThinkPad mtp-probe: bus: 1, device: 126 was not an MTP 
device

  
  $ uname -a
  Linux pieter-ThinkPad 4.3.0-040300-lowlatency #201511020949 SMP PREEMPT Mon 
Nov 2 14:55:33 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  Google search
  http://comments.gmane.org/gmane.linux.usb.general/121851
  https://bugzilla.redhat.com/show_bug.cgi?id=1235715
  http://unix.stackexchange.com/questions/189896/testing-if-hl-340-works

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1527491/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1518457] Re: kswapd0 100% CPU usage

2015-12-20 Thread Sam Lade
That version has also crashed.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1518457

Title:
  kswapd0 100% CPU usage

Status in linux package in Ubuntu:
  In Progress

Bug description:
  As per bug 721896 and various others:

  I'm on an AWS t2.micro instance (Xeon E5-2670, 991MiB of memory).
  Occasionally (about once a day), kswapd0 falls into a busy loop and
  spins on 100% CPU usage indefinitely. This can be provoked by
  copying/writing large files (e.g. dding a 256MB file), but it happens
  occasionally otherwise. System memory usage (not including
  buffers/caches) currently sits at 36%, which is typical[1]. Initially
  I had no swap space configured; I've since tried enabling a 256MB swap
  file, but the problem continues to occur and no swap space is used.
  The system can be recovered with `echo 1 > /proc/sys/vm/drop_caches`.

  Happy to provide further information/take further debugging actions.

  
  [1] Full output from `free`:
   total   used   free sharedbuffers cached
  Mem:   1014936 483448 531488  28556   9756 112700
  -/+ buffers/cache: 360992 653944
  Swap:   262140  0 262140

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-18-generic 4.2.0-18.22
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Nov 19 19:40 seq
   crw-rw 1 root audio 116, 33 Nov 19 19:40 timer
  AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: N/A
  Date: Fri Nov 20 20:44:30 2015
  Ec2AMI: ami-1c552a76
  Ec2AMIManifest: (unknown)
  Ec2AvailabilityZone: us-east-1d
  Ec2InstanceType: t2.micro
  Ec2Kernel: unavailable
  Ec2Ramdisk: unavailable
  IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
  Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize 
libusb: -99
  MachineType: Xen HVM domU
  PciMultimedia:
   
  ProcEnviron:
   TERM=screen
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 xen
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic 
root=UUID=35bc01f4-4602-4823-976e-508edef899df ro console=tty1 console=ttyS0 
net.ifnames=0
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-18-generic N/A
   linux-backports-modules-4.2.0-18-generic  N/A
   linux-firmwareN/A
  RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/06/2015
  dmi.bios.vendor: Xen
  dmi.bios.version: 4.2.amazon
  dmi.chassis.type: 1
  dmi.chassis.vendor: Xen
  dmi.modalias: 
dmi:bvnXen:bvr4.2.amazon:bd05/06/2015:svnXen:pnHVMdomU:pvr4.2.amazon:cvnXen:ct1:cvr:
  dmi.product.name: HVM domU
  dmi.product.version: 4.2.amazon
  dmi.sys.vendor: Xen

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1518457/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1528038] [NEW] package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1 failed to install/upgrade: subprocess installed post-installation script returned error exit stat

2015-12-20 Thread Nathan
Public bug reported:

error reports image is from unknown source

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1
ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20
Uname: Linux 3.16.0-57-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.19
Architecture: amd64
Date: Sat Dec 19 14:40:30 2015
ErrorMessage: subprocess installed post-installation script returned error exit 
status 1
InstallationDate: Installed on 2015-04-05 (259 days ago)
InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1)
RelatedPackageVersions:
 dpkg 1.17.5ubuntu5.5
 apt  1.0.1ubuntu2.10
SourcePackage: linux-lts-utopic
Title: package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1 failed 
to install/upgrade: subprocess installed post-installation script returned 
error exit status 1
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-lts-utopic (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package third-party-packages trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1528038

Title:
  package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1
  failed to install/upgrade: subprocess installed post-installation
  script returned error exit status 1

Status in linux-lts-utopic package in Ubuntu:
  New

Bug description:
  error reports image is from unknown source

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1
  ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20
  Uname: Linux 3.16.0-57-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  Date: Sat Dec 19 14:40:30 2015
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  InstallationDate: Installed on 2015-04-05 (259 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: linux-lts-utopic
  Title: package linux-image-extra-3.16.0-57-generic 3.16.0-57.77~14.04.1 
failed to install/upgrade: subprocess installed post-installation script 
returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1528038/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1528042] [NEW] usb 1-2: device descriptor read/64, error -71

2015-12-20 Thread Cristian Aravena Romero
Public bug reported:

dmesg:
[  112.286744] usb 1-2: device descriptor read/64, error -71
[  112.614682] usb 1-2: new full-speed USB device number 6 using xhci_hcd
[  112.726609] usb 1-2: device descriptor read/64, error -71
[  112.942533] usb 1-2: device descriptor read/64, error -71
[  113.158437] usb 1-2: new full-speed USB device number 7 using xhci_hcd
[  113.158645] usb 1-2: Device not responding to setup address.
[  113.362555] usb 1-2: Device not responding to setup address.
[  113.566297] usb 1-2: device not accepting address 7, error -71
[  113.678260] usb 1-2: new full-speed USB device number 8 using xhci_hcd
[  113.678483] usb 1-2: Device not responding to setup address.
[  113.882401] usb 1-2: Device not responding to setup address.
[  114.086117] usb 1-2: device not accepting address 8, error -71
[  114.086165] usb usb1-port2: unable to enumerate USB device

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: linux-image-4.3.0-2-generic 4.3.0-2.11
ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
Uname: Linux 4.3.0-2-generic x86_64
ApportVersion: 2.19.3-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  caravena   1719 F pulseaudio
CurrentDesktop: GNOME
Date: Sun Dec 20 17:10:16 2015
HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87
InstallationDate: Installed on 2015-07-26 (147 days ago)
InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Alpha amd64 (20150723)
MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.3.0-2-generic 
root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet 
splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-4.3.0-2-generic N/A
 linux-backports-modules-4.3.0-2-generic  N/A
 linux-firmware   1.154
SourcePackage: linux
UdevLog: Error: [Errno 2] No existe el archivo o el directorio: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/15/2013
dmi.bios.vendor: Phoenix Technologies Ltd.
dmi.bios.version: P14AAJ
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: SAMSUNG_NP1234567890
dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.board.version: FAB1
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 9
dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.chassis.version: 0.1
dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
dmi.product.name: 530U3C/530U4C
dmi.product.version: 0.1
dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528042

Title:
  usb 1-2: device descriptor read/64, error -71

Status in linux package in Ubuntu:
  New

Bug description:
  dmesg:
  [  112.286744] usb 1-2: device descriptor read/64, error -71
  [  112.614682] usb 1-2: new full-speed USB device number 6 using xhci_hcd
  [  112.726609] usb 1-2: device descriptor read/64, error -71
  [  112.942533] usb 1-2: device descriptor read/64, error -71
  [  113.158437] usb 1-2: new full-speed USB device number 7 using xhci_hcd
  [  113.158645] usb 1-2: Device not responding to setup address.
  [  113.362555] usb 1-2: Device not responding to setup address.
  [  113.566297] usb 1-2: device not accepting address 7, error -71
  [  113.678260] usb 1-2: new full-speed USB device number 8 using xhci_hcd
  [  113.678483] usb 1-2: Device not responding to setup address.
  [  113.882401] usb 1-2: Device not responding to setup address.
  [  114.086117] usb 1-2: device not accepting address 8, error -71
  [  114.086165] usb usb1-port2: unable to enumerate USB device

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  caravena   1719 F pulseaudio
  CurrentDesktop: GNOME
  Date: Sun Dec 20 17:10:16 2015
  HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87
  InstallationDate: Installed on 2015-07-26 (147 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Alpha amd64 (20150723)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.3.0-2-generic 
root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet 
splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   

[Kernel-packages] [Bug 1528042] Status changed to Confirmed

2015-12-20 Thread Brad Figg
This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1528042

Title:
  usb 1-2: device descriptor read/64, error -71

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  dmesg:
  [  112.286744] usb 1-2: device descriptor read/64, error -71
  [  112.614682] usb 1-2: new full-speed USB device number 6 using xhci_hcd
  [  112.726609] usb 1-2: device descriptor read/64, error -71
  [  112.942533] usb 1-2: device descriptor read/64, error -71
  [  113.158437] usb 1-2: new full-speed USB device number 7 using xhci_hcd
  [  113.158645] usb 1-2: Device not responding to setup address.
  [  113.362555] usb 1-2: Device not responding to setup address.
  [  113.566297] usb 1-2: device not accepting address 7, error -71
  [  113.678260] usb 1-2: new full-speed USB device number 8 using xhci_hcd
  [  113.678483] usb 1-2: Device not responding to setup address.
  [  113.882401] usb 1-2: Device not responding to setup address.
  [  114.086117] usb 1-2: device not accepting address 8, error -71
  [  114.086165] usb usb1-port2: unable to enumerate USB device

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.3.0-2-generic 4.3.0-2.11
  ProcVersionSignature: Ubuntu 4.3.0-2.11-generic 4.3.0
  Uname: Linux 4.3.0-2-generic x86_64
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  caravena   1719 F pulseaudio
  CurrentDesktop: GNOME
  Date: Sun Dec 20 17:10:16 2015
  HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87
  InstallationDate: Installed on 2015-07-26 (147 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Alpha amd64 (20150723)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.3.0-2-generic 
root=UUID=4f4435ca-b877-47a5-9065-3dd624c0514e ro rootflags=subvol=@ quiet 
splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.3.0-2-generic N/A
   linux-backports-modules-4.3.0-2-generic  N/A
   linux-firmware   1.154
  SourcePackage: linux
  UdevLog: Error: [Errno 2] No existe el archivo o el directorio: 
'/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/15/2013
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P14AAJ
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
  dmi.product.name: 530U3C/530U4C
  dmi.product.version: 0.1
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1528042/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1121699] Re: aufs CONFIG_AUFS_EXPORT build option should be enabled

2015-12-20 Thread Norbert
Bug still exists in Ubuntu 12.04.5 LTS with linux-image-generic 3.2.0.97.113.
Please fix this bug.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1121699

Title:
  aufs CONFIG_AUFS_EXPORT build option should be enabled

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Raring:
  Fix Released
Status in linux source package in Wily:
  Fix Released

Bug description:
  This is needed to export aufs filesystems via nfs.

  This was set in a previous version (in Debian - http://bugs.debian.org
  /cgi-bin/bugreport.cgi?bug=490079), and released in Ubuntu build for
  aufs 0+20080719-4
  (https://launchpad.net/ubuntu/+source/aufs/0+20080719-4), so this
  could perhaps be considered a regression (although to be fair aufs and
  its packaging has undergone significant rewriting since then).

  Regardless considering aufs is a popular method of supporting large
  storage systems (among other things) and nfs is a popular method of
  exporting large storage systems, it would be great if this could be
  enabled in a future build, unless there is some known
  contraindication.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1121699/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp


[Kernel-packages] [Bug 1492764] Re: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled (expected 1, found 0)

2015-12-20 Thread Ljiljan Veselinovic
The error is gone with 4.3, but what I noticed is higher  load average values 
with 4.3 kernel driver?  
I have both Ubuntu 14.04 and Ubuntu 15. 10 (4.2. and 4.3. kernel installed) and 
all three load average  value is higher (within the limit, but higher). Is this 
some kind of a problem?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1492764

Title:
  [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled
  (expected 1, found 0)

Status in Linux:
  Fix Released
Status in linux package in Ubuntu:
  Incomplete

Bug description:
  System: Kubuntu 15.10

  Since kernel version 4.2 I have a few of this errors:

  Sep 06 16:16:35 benediktZ50-70 kernel: [drm:intel_pipe_config_compare [i915]] 
*ERROR* mismatch in ips_enabled (expected 1, found 0)
  Sep 06 16:16:35 benediktZ50-70 kernel: [ cut here ]
  Sep 06 16:16:35 benediktZ50-70 kernel: WARNING: CPU: 0 PID: 187 at 
/build/linux-4dBub_/linux-4.2.0/drivers/gpu/drm/i915/intel_display.c:12324 
check_crtc_state+0x2c5/0x440 [i915]()
  Sep 06 16:16:35 benediktZ50-70 kernel: pipe state doesn't match!
  Sep 06 16:16:35 benediktZ50-70 kernel: Modules linked in: rtsx_usb_sdmmc 
rtsx_usb i915 i2c_algo_bit drm_kms_helper psmouse ahci drm libahci r8169 mii 
sdhci_acpi video sdhci i2c_hid hid
  Sep 06 16:16:35 benediktZ50-70 kernel: CPU: 0 PID: 187 Comm: plymouthd 
Tainted: GW   4.2.0-7-generic #7-Ubuntu
  Sep 06 16:16:35 benediktZ50-70 kernel: Hardware name: LENOVO 20354/Lancer 
5A5, BIOS 9BCN91WW 07/21/2015
  Sep 06 16:16:35 benediktZ50-70 kernel:  c023f1e8 8802413277e8 
817b0465 
  Sep 06 16:16:35 benediktZ50-70 kernel:  880241327838 880241327828 
81076536 880241327858
  Sep 06 16:16:35 benediktZ50-70 kernel:  8802413278c0 880241152000 
0001 880241152350
  Sep 06 16:16:35 benediktZ50-70 kernel: Call Trace:
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
dump_stack+0x45/0x57
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
warn_slowpath_common+0x86/0xc0
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
warn_slowpath_fmt+0x46/0x50
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] ? 
intel_pipe_config_compare+0xb31/0xc60 [i915]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
check_crtc_state+0x2c5/0x440 [i915]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
intel_modeset_check_state+0x20e/0x6b0 [i915]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
intel_crtc_set_config+0x4c7/0x580 [i915]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] ? 
drm_mode_create+0x25/0x60 [drm]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
drm_mode_set_config_internal+0x66/0x100 [drm]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
drm_mode_setcrtc+0x3a8/0x4c0 [drm]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
drm_ioctl+0x125/0x610 [drm]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] ? 
drm_mode_setplane+0x1b0/0x1b0 [drm]
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
do_vfs_ioctl+0x285/0x470
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] ? 
do_munmap+0x349/0x480
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
SyS_ioctl+0x79/0x90
  Sep 06 16:16:35 benediktZ50-70 kernel:  [] 
entry_SYSCALL_64_fastpath+0x16/0x75
  Sep 06 16:16:35 benediktZ50-70 kernel: ---[ end trace 724377a3c01e4270 ]---

  
  I will check next week if these errors have any impact on my system.

  This is a Nvidia Optimus System with the Intel graphic card activated
  by default.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: linux-image-4.2.0-7-generic 4.2.0-7.7
  ProcVersionSignature: Ubuntu 4.2.0-7.7-generic 4.2.0
  Uname: Linux 4.2.0-7-generic x86_64
  ApportVersion: 2.18-0ubuntu9
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  benedikt   1550 F pulseaudio
   /dev/snd/controlC1:  benedikt   1550 F pulseaudio
  CurrentDesktop: KDE
  Date: Sun Sep  6 16:22:48 2015
  HibernationDevice: UUID=3383b02e-b89c-462c-903a-cb936e81b2bf
  InstallationDate: Installed on 2014-12-21 (259 days ago)
  InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141218)
  MachineType: LENOVO 20354
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-7-generic 
root=UUID=b549945a-67ac-4d14-849c-b54e561d47cc ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-7-generic N/A
   linux-backports-modules-4.2.0-7-generic  N/A
   linux-firmware   1.147
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/21/2015
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 9BCN91WW
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Lancer 5A5
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058WIN
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo Z50-70
  dmi.modalias: