[Kernel-packages] [Bug 1246981] Re: Bluetooth devices fail to re-connect after sleep.
If it's a kernel regression, please bisect the kernel: https://wiki.ubuntu.com/Kernel/KernelBisection -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1246981 Title: Bluetooth devices fail to re-connect after sleep. Status in bluez package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: This exact harware was working faultlessly in 13.04. Since re- installing at 13.10 the mouse consistently failes to reconnect after the device either hybernates or ever goes to screen saver sleep. I have to remove the dive and re-add it each time (which works well). There are other issues with the bluetooth stack as well in that I have not found any way to use bluetooth tethering to my mobile which again worked well and was easy to configure in 13.04 Peter. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth 4.101-0ubuntu8b1 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 Date: Fri Nov 1 16:44:37 2013 InstallationDate: Installed on 2013-10-19 (13 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Dell Inc. Latitude E6530 MarkForUpload: True PackageArchitecture: all ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=8283de78-9264-42bf-a8b4-25643fa1475f ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 07Y85M dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd12/13/2012:svnDellInc.:pnLatitudeE6530:pvr01:rvnDellInc.:rn07Y85M:rvrA01:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6530 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: 20:16:D8:9C:38:E5 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:1817731 acl:117432 sco:0 events:5271 errors:0 TX bytes:37955 acl:131 sco:0 commands:5096 errors:0 syslog: Nov 1 14:50:19 pnunn-Latitude-E6530 bluetoothd[1015]: Discovery session 0x7f6489f7b450 with :1.582 activated Nov 1 14:50:25 pnunn-Latitude-E6530 bluetoothd[1015]: Unknown command complete for opcode 37 Nov 1 14:50:28 pnunn-Latitude-E6530 bluetoothd[1015]: Stopping discovery Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211132] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci:00/:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input29 Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211646] hid-generic 0005:045E:0700.000C: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1246981/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1246981] Re: Bluetooth devices fail to re-connect after sleep.
Well, that's sort of irrelevant for those of us having this problem. I just checked, and mine is a Broadcom BCM20702A0, so not exactly a niche vendor. I'm especially concerned since it seems like it's just not correctly re-scanning for bluetooth devices after waking from sleep due to some sort of software screw up since the 20.10 update, and there's nothing wrong with the controller. For those of us who depend on bluetooth, this is a major regression. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1246981 Title: Bluetooth devices fail to re-connect after sleep. Status in bluez package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: This exact harware was working faultlessly in 13.04. Since re- installing at 13.10 the mouse consistently failes to reconnect after the device either hybernates or ever goes to screen saver sleep. I have to remove the dive and re-add it each time (which works well). There are other issues with the bluetooth stack as well in that I have not found any way to use bluetooth tethering to my mobile which again worked well and was easy to configure in 13.04 Peter. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth 4.101-0ubuntu8b1 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 Date: Fri Nov 1 16:44:37 2013 InstallationDate: Installed on 2013-10-19 (13 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Dell Inc. Latitude E6530 MarkForUpload: True PackageArchitecture: all ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=8283de78-9264-42bf-a8b4-25643fa1475f ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 07Y85M dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd12/13/2012:svnDellInc.:pnLatitudeE6530:pvr01:rvnDellInc.:rn07Y85M:rvrA01:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6530 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: 20:16:D8:9C:38:E5 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:1817731 acl:117432 sco:0 events:5271 errors:0 TX bytes:37955 acl:131 sco:0 commands:5096 errors:0 syslog: Nov 1 14:50:19 pnunn-Latitude-E6530 bluetoothd[1015]: Discovery session 0x7f6489f7b450 with :1.582 activated Nov 1 14:50:25 pnunn-Latitude-E6530 bluetoothd[1015]: Unknown command complete for opcode 37 Nov 1 14:50:28 pnunn-Latitude-E6530 bluetoothd[1015]: Stopping discovery Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211132] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci:00/:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input29 Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211646] hid-generic 0005:045E:0700.000C: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1246981/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1830560] Re: suspend
Please try 20.04... Radeon support is much better in newer release. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1830560 Title: suspend Status in linux package in Ubuntu: Invalid Bug description: This machine 16.04 fails to recover from suspend. Screen goes dark and no activity showing on HD Recovers OK after a hard restart with a bunch of "orphaned inodes" and functions properly. Seems to have occurred since an update. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-release-upgrader-core 1:16.04.26 ProcVersionSignature: Ubuntu 4.4.0-148.174-generic 4.4.177 Uname: Linux 4.4.0-148-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: Unity Date: Sun May 26 14:49:41 2019 InstallationDate: Installed on 2016-12-02 (905 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: dist-upgrade UpgradeStatus: No upgrade log present (probably fresh install) VarLogDistupgradeTermlog: --- ApportVersion: 2.20.1-0ubuntu2.25 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: david 2264 F pulseaudio /dev/snd/controlC1: david 2264 F pulseaudio /dev/snd/controlC2: david 2264 F pulseaudio /dev/snd/controlC0: david 2264 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=6d9c0c07-720c-44a7-8c67-346b7a6b9755 InstallationDate: Installed on 2016-12-02 (1406 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 10117 Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-190-generic root=UUID=073e377f-0d1b-496e-8464-3d1b70ce67ba ro quiet splash ProcVersionSignature: Ubuntu 4.4.0-190.220-generic 4.4.233 RelatedPackageVersions: linux-restricted-modules-4.4.0-190-generic N/A linux-backports-modules-4.4.0-190-generic N/A linux-firmware 1.157.23 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: xenial Uname: Linux 4.4.0-190-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo tty uucp uuidd _MarkForUpload: True dmi.bios.date: 11/05/2013 dmi.bios.vendor: LENOVO dmi.bios.version: I7KT31AUS dmi.board.vendor: LENOVO dmi.board.version: 31900058 STD dmi.chassis.type: 3 dmi.chassis.vendor: LENOVO dmi.modalias: dmi:bvnLENOVO:bvrI7KT31AUS:bd11/05/2013:svnLENOVO:pn10117:pvrLenovoH535:rvnLENOVO:rn:rvr31900058STD:cvnLENOVO:ct3:cvr: dmi.product.name: 10117 dmi.product.version: Lenovo H535 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1830560/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Autopkgtest regression report (alsa-lib/1.2.2-2.1ubuntu2.1)
All autopkgtests for the newly accepted alsa-lib (1.2.2-2.1ubuntu2.1) for focal have finished running. The following regressions have been reported in tests triggered by the package: asterisk/1:16.2.1~dfsg-2ubuntu1 (armhf) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/focal/update_excuses.html#alsa-lib [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901798] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901798 Title: Wireless-9560 limit speed Status in linux package in Ubuntu: Confirmed Bug description: I am having wifi throughput issues. all other devices that connected to my wireless are getting 150 - 200+ Mbps download speed. I have an HP OMEN gaming laptop that cannot get pass 80mbps to download speed. Can you help me out with how to report this? ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-25-generic 5.8.0-25.26 ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 Uname: Linux 5.8.0-25-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: krillavilla 5043 F pulseaudio /dev/snd/controlC1: krillavilla 5043 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Oct 27 21:48:20 2020 InstallationDate: Installed on 2020-06-23 (126 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 05c8:03ab Cheng Uei Precision Industry Co., Ltd (Foxlink) HP Wide Vision HD Camera Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP OMEN by HP Laptop ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic root=UUID=98265a4d-5439-415e-b43c-904265a8559a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.8.0-25-generic N/A linux-backports-modules-5.8.0-25-generic N/A linux-firmware1.190 SourcePackage: linux UpgradeStatus: Upgraded to groovy on 2020-10-19 (9 days ago) dmi.bios.date: 04/24/2019 dmi.bios.release: 15.9 dmi.bios.vendor: AMI dmi.bios.version: F.09 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 8466 dmi.board.vendor: HP dmi.board.version: 68.21 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 68.21 dmi.modalias: dmi:bvnAMI:bvrF.09:bd04/24/2019:br15.9:efr68.21:svnHP:pnOMENbyHPLaptop:pvr:rvnHP:rn8466:rvr68.21:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV HP OMEN dmi.product.name: OMEN by HP Laptop dmi.product.sku: 4CC49UA#ABA dmi.sys.vendor: HP modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-26T00:47:21.524860 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901798/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901798] [NEW] Wireless-9560 limit speed
Public bug reported: I am having wifi throughput issues. all other devices that connected to my wireless are getting 150 - 200+ Mbps download speed. I have an HP OMEN gaming laptop that cannot get pass 80mbps to download speed. Can you help me out with how to report this? ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-25-generic 5.8.0-25.26 ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 Uname: Linux 5.8.0-25-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: krillavilla 5043 F pulseaudio /dev/snd/controlC1: krillavilla 5043 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Oct 27 21:48:20 2020 InstallationDate: Installed on 2020-06-23 (126 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 05c8:03ab Cheng Uei Precision Industry Co., Ltd (Foxlink) HP Wide Vision HD Camera Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP OMEN by HP Laptop ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic root=UUID=98265a4d-5439-415e-b43c-904265a8559a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.8.0-25-generic N/A linux-backports-modules-5.8.0-25-generic N/A linux-firmware1.190 SourcePackage: linux UpgradeStatus: Upgraded to groovy on 2020-10-19 (9 days ago) dmi.bios.date: 04/24/2019 dmi.bios.release: 15.9 dmi.bios.vendor: AMI dmi.bios.version: F.09 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 8466 dmi.board.vendor: HP dmi.board.version: 68.21 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 68.21 dmi.modalias: dmi:bvnAMI:bvrF.09:bd04/24/2019:br15.9:efr68.21:svnHP:pnOMENbyHPLaptop:pvr:rvnHP:rn8466:rvr68.21:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV HP OMEN dmi.product.name: OMEN by HP Laptop dmi.product.sku: 4CC49UA#ABA dmi.sys.vendor: HP modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-26T00:47:21.524860 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug groovy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901798 Title: Wireless-9560 limit speed Status in linux package in Ubuntu: New Bug description: I am having wifi throughput issues. all other devices that connected to my wireless are getting 150 - 200+ Mbps download speed. I have an HP OMEN gaming laptop that cannot get pass 80mbps to download speed. Can you help me out with how to report this? ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-25-generic 5.8.0-25.26 ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 Uname: Linux 5.8.0-25-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: krillavilla 5043 F pulseaudio /dev/snd/controlC1: krillavilla 5043 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Oct 27 21:48:20 2020 InstallationDate: Installed on 2020-06-23 (126 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 05c8:03ab Cheng Uei Precision Industry Co., Ltd (Foxlink) HP Wide Vision HD Camera Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP OMEN by HP Laptop ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic root=UUID=98265a4d-5439-415e-b43c-904265a8559a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.8.0-25-generic N/A linux-backports-modules-5.8.0-25-generic N/A linux-firmware1.190 SourcePackage: linux UpgradeStatus: Upgraded to groovy on 2020-10-19 (9 days ago) dmi.bios.date: 04/24/2019 dmi.bios.release: 15.9 dmi.bios.ve
[Kernel-packages] [Bug 1246981] Re: Bluetooth devices fail to re-connect after sleep.
That means the bluetooth controller really wakes up after started a scanning. Recent BT 4.0 controllers from Intel or Qualcomm shouldn't have this bug. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1246981 Title: Bluetooth devices fail to re-connect after sleep. Status in bluez package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: This exact harware was working faultlessly in 13.04. Since re- installing at 13.10 the mouse consistently failes to reconnect after the device either hybernates or ever goes to screen saver sleep. I have to remove the dive and re-add it each time (which works well). There are other issues with the bluetooth stack as well in that I have not found any way to use bluetooth tethering to my mobile which again worked well and was easy to configure in 13.04 Peter. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth 4.101-0ubuntu8b1 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 Date: Fri Nov 1 16:44:37 2013 InstallationDate: Installed on 2013-10-19 (13 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Dell Inc. Latitude E6530 MarkForUpload: True PackageArchitecture: all ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=8283de78-9264-42bf-a8b4-25643fa1475f ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 07Y85M dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd12/13/2012:svnDellInc.:pnLatitudeE6530:pvr01:rvnDellInc.:rn07Y85M:rvrA01:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6530 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: 20:16:D8:9C:38:E5 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:1817731 acl:117432 sco:0 events:5271 errors:0 TX bytes:37955 acl:131 sco:0 commands:5096 errors:0 syslog: Nov 1 14:50:19 pnunn-Latitude-E6530 bluetoothd[1015]: Discovery session 0x7f6489f7b450 with :1.582 activated Nov 1 14:50:25 pnunn-Latitude-E6530 bluetoothd[1015]: Unknown command complete for opcode 37 Nov 1 14:50:28 pnunn-Latitude-E6530 bluetoothd[1015]: Stopping discovery Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211132] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci:00/:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input29 Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211646] hid-generic 0005:045E:0700.000C: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1246981/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1896091] Re: [i915] Noise-like lines of graphics corruption when moving windows in Xorg sessions
Still broken in 5.8.0-26-generic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1896091 Title: [i915] Noise-like lines of graphics corruption when moving windows in Xorg sessions Status in Mutter: Unknown Status in linux package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Invalid Bug description: I left my desktop (T480s thinkpad docked to ThinkVision P24h-10) unattended for a while, and then got the error message and now have funny lines on activity, e.g. red lines flashing on top of gnome-shell bar when switching windows, or white blocks/lines around typing text. This is the second or third time it happened, reboot fixes it until the error pops up again. ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-19-generic 5.8.0-19.20 ProcVersionSignature: Ubuntu 5.8.0-19.20-generic 5.8.8 Uname: Linux 5.8.0-19-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu45 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: jak5052 F pulseaudio /dev/snd/controlC1: jak5052 F pulseaudio /dev/snd/pcmC1D0p: jak5052 F...m pulseaudio /dev/snd/controlC0: jak5052 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: GNOME CurrentDmesg: Error: command ['dmesg'] failed with exit code 1: dmesg: read kernel buffer failed: Operation not permitted Date: Thu Sep 17 19:14:11 2020 HibernationDevice: RESUME=none InstallationDate: Installed on 2018-03-14 (917 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180313) MachineType: LENOVO 20L8S02D00 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.8.0-19-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.8.0-19-generic N/A linux-backports-modules-5.8.0-19-generic N/A linux-firmware1.190 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/04/2020 dmi.bios.release: 1.42 dmi.bios.vendor: LENOVO dmi.bios.version: N22ET65W (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 20L8S02D00 dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.ec.firmware.release: 1.20 dmi.modalias: dmi:bvnLENOVO:bvrN22ET65W(1.42):bd06/04/2020:br1.42:efr1.20:svnLENOVO:pn20L8S02D00:pvrThinkPadT480s:rvnLENOVO:rn20L8S02D00:rvrNotDefined:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T480s dmi.product.name: 20L8S02D00 dmi.product.sku: LENOVO_MT_20L8_BU_Think_FM_ThinkPad T480s dmi.product.version: ThinkPad T480s dmi.sys.vendor: LENOVO --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu45 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: jak5052 F pulseaudio /dev/snd/controlC1: jak5052 F pulseaudio /dev/snd/pcmC1D0p: jak5052 F...m pulseaudio /dev/snd/controlC0: jak5052 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: GNOME CurrentDmesg: Error: command ['dmesg'] failed with exit code 1: dmesg: read kernel buffer failed: Operation not permitted DistroRelease: Ubuntu 20.10 HibernationDevice: RESUME=none InstallationDate: Installed on 2018-03-14 (917 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180313) MachineType: LENOVO 20L8S02D00 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.8.0-19-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.8.0-19.20-generic 5.8.8 RelatedPackageVersions: linux-restricted-modules-5.8.0-19-generic N/A linux-backports-modules-5.8.0-19-generic N/A linux-firmware1.190 Tags: groovy Uname: Linux 5.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip fax input kvm lpadmin lxd plugdev sambashare sbuild sudo _MarkForUpload: True dmi.bios.date: 06/04/2020 dmi.bios.release: 1.42 dmi.bios.vendor: LENOVO dmi.bios.version: N22ET65W (1.42 ) dmi.board.asset.tag: Not Available dmi.board.name: 20L8S02D00 dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.ec.firmware.release: 1.20 dmi.modalias: dmi:bvnLENOVO:bvrN22ET65W(1.42):bd06/04/2020:br1.42:efr1.20:svnLENOVO:pn20L8S02D00:pvrThinkPadT480s:
[Kernel-packages] [Bug 1893538] Re: No bluetooth on Dell XPS 7390 with AX200 after upgrade to 20.04
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux-firmware (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1893538 Title: No bluetooth on Dell XPS 7390 with AX200 after upgrade to 20.04 Status in linux-firmware package in Ubuntu: Confirmed Bug description: Hi, my Dell XPS 7390 worked just fine with Ubuntu 19.10, but after clean-install upgrading to 20.04 I don't have working bluetooth any more. The machine has an Intel AX200 installed. I'm not sure what details are helpful to provide, so here are some random things, happy to provide more if people can provide hints... # uname -a Linux marvin 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux # lspci 00:00.0 Host bridge: Intel Corporation Device 9b61 (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics (rev 02) 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0c) 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model 00:12.0 Signal processing controller: Intel Corporation Comet Lake Thermal Subsytem 00:14.0 USB controller: Intel Corporation Device 02ed 00:14.2 RAM memory: Intel Corporation Device 02ef 00:15.0 Serial bus controller [0c80]: Intel Corporation Serial IO I2C Host Controller 00:15.1 Serial bus controller [0c80]: Intel Corporation Comet Lake Serial IO I2C Host Controller 00:16.0 Communication controller: Intel Corporation Comet Lake Management Engine Interface 00:1c.0 PCI bridge: Intel Corporation Device 02bc (rev f0) 00:1c.6 PCI bridge: Intel Corporation Device 02be (rev f0) 00:1d.0 PCI bridge: Intel Corporation Device 02b0 (rev f0) 00:1d.4 PCI bridge: Intel Corporation Device 02b4 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device 0284 00:1f.3 Audio device: Intel Corporation Device 02c8 00:1f.4 SMBus: Intel Corporation Device 02a3 00:1f.5 Serial bus controller [0c80]: Intel Corporation Comet Lake SPI (flash) Controller 01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01) 02:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a) 03:00.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:00.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:01.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:02.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 04:04.0 PCI bridge: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] (rev 02) 05:00.0 System peripheral: Intel Corporation JHL6540 Thunderbolt 3 NHI (C step) [Alpine Ridge 4C 2016] (rev 02) 3b:00.0 USB controller: Intel Corporation JHL6540 Thunderbolt 3 USB Controller (C step) [Alpine Ridge 4C 2016] (rev 02) 71:00.0 Non-Volatile memory controller: Micron Technology Inc Device 5410 (rev 01) # dmesg | grep iwl [8.578338] iwlwifi :02:00.0: enabling device ( -> 0002) [8.594306] iwlwifi :02:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2 [8.594320] iwlwifi :02:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2 [8.597017] iwlwifi :02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17 [8.597019] iwlwifi :02:00.0: Found debug destination: EXTERNAL_DRAM [8.597020] iwlwifi :02:00.0: Found debug configuration: 0 [8.597192] iwlwifi :02:00.0: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm [8.650489] iwlwifi :02:00.0: Detected Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W), REV=0x340 [8.663161] iwlwifi :02:00.0: Applying debug destination EXTERNAL_DRAM [8.663495] iwlwifi :02:00.0: Allocated 0x0040 bytes for firmware monitor. [8.829671] iwlwifi :02:00.0: base HW address: 04:ed:33:c0:85:78 [8.846912] iwlwifi :02:00.0 wlp2s0: renamed from wlan0 [9.459653] iwlwifi :02:00.0: Applying debug destination EXTERNAL_DRAM [9.626499] iwlwifi :02:00.0: FW already configured (0) - re-configuring To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1893538/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1871794] Re: [Bluetooth] No audio output/input in HSP/HFP mode
@Marco, What the bluetooth module on your machine? Could you please upload the vendor ID:device ID like #49? thx. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1871794 Title: [Bluetooth] No audio output/input in HSP/HFP mode Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm testing with Sony bluetooth headset SBH20, works fine in A2DP profile, but I can't get audio input and output work in HSP/HFP profile. [Reproduce steps] 1. Scan and pair BT headset in Bluetooth setting 2. Switch to HSP/HFP profile in Sound setting 3. Test sound output/input [Machine information] ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Uname: Linux 5.4.0-21-generic x86_64 ApportVersion: 2.20.11-0ubuntu25 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1359 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Thu Apr 9 16:26:52 2020 InstallationDate: Installed on 2020-04-09 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) SourcePackage: pulseaudio Symptom: audio Symptom_Card: SBH20 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1359 F pulseaudio Symptom_Type: No sound at all Title: [SBH20, recording] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/17/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.0.13 dmi.board.name: 0188D1 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 31 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.0.13:bd09/17/2019:svnDellInc.:pnXPS1373902-in-1:pvr:rvnDellInc.:rn0188D1:rvrA00:cvnDellInc.:ct31:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 7390 2-in-1 dmi.product.sku: 08B0 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1871794/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901129] Re: Fix broken Realtek 8821C BT after S3
Realtek's firmware was approved by upstream at https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux- firmware.git/commit/?id=09e8cfffdecc1f373a82e9456c6cd8810a831288 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1901129 Title: Fix broken Realtek 8821C BT after S3 Status in HWE Next: New Status in linux-firmware package in Ubuntu: Confirmed Status in linux-firmware source package in Focal: Confirmed Status in linux-firmware source package in Groovy: Confirmed Bug description: [Impact] Realtek 8821C Bluetooth controller may stop working after S3. [Fix] Use the new firmware from Realtek. Link: https://lore.kernel.org/linux-firmware/20201013084718.3077-1-max.c...@realtek.com/ [Test] With the new firmware, the BT controller works and can pass 1000 cycles of S3. [Regression Potentianl] It's always hit-or-miss for firmware update. Since Realtek asked us to use this firmware, we can only trusth them. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1901129/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1814983] Re: zfs poor sustained read performance from ssd pool
Hi Colin, thanks so much for giving this another look. I don't see any references to trying different zfs_arc_meta_limit* settings here! I raised zfs_arc_meta_limit_percent from the default 75 to 95 and my system has been running this ripgrep for four hours without falling to pieces. I think we can declare success on this one! Thanks # grep . /sys/module/zfs/parameters/zfs_arc_{dnode,meta}_limit* /sys/module/zfs/parameters/zfs_arc_dnode_limit:0 /sys/module/zfs/parameters/zfs_arc_dnode_limit_percent:50 /sys/module/zfs/parameters/zfs_arc_meta_limit:0 /sys/module/zfs/parameters/zfs_arc_meta_limit_percent:95 7.97% [kernel] [k] SHA256TransformBlocks 3.33% [kernel] [k] _raw_spin_lock 2.59% [kernel] [k] arc_evict_state 2.39% [kernel] [k] mutex_lock 2.08% [kernel] [k] osq_lock PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 28555 sarnold 20 0 28.648g 0.023t 2160 S 262.8 18.8 546:39.58 rg 1567 root 20 0 0 0 0 R 71.4 0.0 1200:10 arc_reclaim 2 root 20 0 0 0 0 R 23.7 0.0 238:17.77 kthreadd 1966 root 0 -20 0 0 0 D 11.2 0.0 163:24.49 z_rd_int_2 1967 root 0 -20 0 0 0 S 11.2 0.0 163:25.54 z_rd_int_3 1968 root 0 -20 0 0 0 S 11.2 0.0 163:25.52 z_rd_int_4 # zpool iostat 1 capacity operations bandwidth poolalloc free read write read write [...] -- - - - - - - fst 2.11T 1.52T 13.8K 0 112M 0 srv 1.84T 6.32T 0 0 0 0 -- - - - - - - fst 2.11T 1.52T 17.4K 0 146M 0 srv 1.84T 6.32T 0 0 0 0 -- - - - - - - fst 2.11T 1.52T 17.3K 0 147M 0 srv 1.84T 6.32T 0 0 0 0 -- - - - - - - # arc_summary ZFS Subsystem ReportTue Oct 27 19:32:40 2020 ARC Summary: (HEALTHY) Memory Throttle Count: 0 ARC Misc: Deleted:688.20m Mutex Misses: 115.54m Evict Skips:99.92b ARC Size: 89.14% 56.07 GiB Target Size: (Adaptive) 9.30% 5.85GiB Min Size (Hard Limit): 6.25% 3.93GiB Max Size (High Water): 16:162.90 GiB ARC Size Breakdown: Recently Used Cache Size: 81.96% 24.51 GiB Frequently Used Cache Size: 18.04% 5.39GiB ARC Hash Breakdown: Elements Max: 9.78m Elements Current: 56.79% 5.55m Collisions: 201.32m Chain Max: 8 Chains: 736.70k ARC Total accesses: 12.23b Cache Hit Ratio:90.87% 11.12b Cache Miss Ratio: 9.13% 1.12b Actual Hit Ratio: 90.27% 11.04b Data Demand Efficiency: 82.63% 666.79m Data Prefetch Efficiency: 27.20% 14.18m CACHE HITS BY CACHE LIST: Most Recently Used: 30.85% 3.43b Most Frequently Used: 68.49% 7.61b Most Recently Used Ghost: 0.13% 13.99m Most Frequently Used Ghost: 0.61% 67.51m CACHE HITS BY DATA TYPE: Demand Data: 4.96% 550.94m Prefetch Data:0.03% 3.86m Demand Metadata: 94.20% 10.47b Prefetch Metadata:0.80% 89.48m CACHE MISSES BY DATA TYPE: Demand Data: 10.37% 115.85m Prefetch Data:0.92% 10.32m Demand Metadata: 82.55% 921.91m Prefetch Metadata:6.15% 68.73m L2 ARC Summary: (HEALTHY) Low Memory Aborts: 116 Free on Write: 21.13k R/W Clashes:3 Bad Checksums: 0 IO Errors: 0 L2 ARC Size: (Adaptive) 418.26 GiB Compressed: 90.78% 379.71 GiB Header Size:0.08% 360.27 MiB L2 AR
[Kernel-packages] [Bug 1889637] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1889637 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1889637 Title: Raspberry Pi 3B hangs - dev_pm_opp_set_rate: failed to find current OPP, Failed to get throttled, Failed to change plib frequency; mmc timeout waiting for hardware interrupt Status in linux package in Ubuntu: Incomplete Bug description: ### uname -a (64-bit ARM, official image): `Linux ubuntu 5.4.0-1015-raspi #15-Ubuntu SMP Fri Jul 10 05:34:24 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux` ### LSB release (Ubuntu *Server*, focal): Description: Ubuntu 20.04.1 LTS ### Interesting packages installed - zfs-dkms (with initramfs support) @ 0.8.3-1ubuntu12.2 * spl-dkms @ 0.8.3-1ubuntu12.2 - dphys-swapfile ### Hardware model: Raspberry Pi 3 Model B - 32 GiB SD card with root partition * had a swap partition; now unused * migrated to dphys-swapfile - Attached 32 GiB USB stick as zpool for storage (not root FS) - Current PSU reportedly outputs 2.4A supply for the Pi * Still have occasional undervolt warnings (formally requires 2.5A) * Lightning indicator not present however - Connected over wireless networking ## Issue - When under significant computational load at some point, the machine appears to freeze. * I usually log in in a headless manner via ssh, so externally the machine is frozen and I need to pull the power cable - Connectig the HDMI monitor the following messsages appear, in various orders each time: ```terminal cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 9,223,372,036,854,775,698 ({illegible on my photograph, presumably -110}) hwmon hwmon1: Failed to get throttled (-110) raspberrypi-clk firmware clocks: Failed to change plib frequency: -110 mmc0: timeout waiting for hardware interrupt # mmc0 would be the root partition ### ... typically later on in the output rcu: INFO: rcu_sched detected stalls on CPU/tasks rcu: $1-...0: (1 GPs behind) idle=.../1/0x4{more 0s...}02 softirq=66377/66378 {or 26106/26107} fqs={this value varies} INFO: task kworker/{...} blocked for more than 120 seconds TAINTED: PWC OE 5.4.0-1015-raspi #15-ubuntu watchdog: BUG: soft lockup - CPU #3 stuck for 22s! ``` The OPP frequency above looks to me like it may be the cause of the issue, I have added the commas myself to the output but it would appear to be a rubbish value; [this](https://lkml.org/lkml/2020/7/24/683) mailing list archive I found whilst searching for terms found in the messages appears to back up my belief that we should be seeing a sensible CPU frequency here, expressed in integer Hz; the above would be 9.2 EHz assuming Hertz are the base unit, higher still if it's k/M/GHz etc. My most sensible guess is this value has been brought up somewhere as garbage, and understandably the system fails to scale the clock speed, with the resultant crashes presumably due to this. Beyond this point, there is no kernel panic, however the machine locks up externally; does not respond to USB keyboard NumLock and is invisible on the network, with more and more errors gradually being output to the console via the HDMI display; the most notable being the SD card is not responding Just before encountering this issue I had added a swap aprtition, to the SD card, as I had none by default and the system seemed to be hanging when it presumably was sending bad_allocs to userland processes as it failed to allocate memory. As the SD card was mentioned, I have tried a variety of power supplies (as I was getting several undervolt warnings) and eventually removed the swap partition and used a swapfile with `dphys-swapfile` knowing that the way the Pi accesses the SD card is somewhat different from a typical machine. However, neither of these two seems to have resolved the issue, giving further evidence that the frequency scaling may well be the primary issue and the rest is simply the carnage that ensues. ## Steps to Reproduce - Seems to happen sporadically when the machine is under stress, within 5-25 minutes - Currently I am trying to set up a rootless docker compose file * Attempting to pull the images eventually leads to the issue * The images a
[Kernel-packages] [Bug 1791427] Re: Touchpad and/or trackpoint stop working after S3 suspend on Lenovo X1 Carbon 6th
I spoke too soon. Deep sleep works now, and the touchpad keeps working, but only - even with the new motherboard - if I keep the NFC *enabled* in the BIOS. And the trackpoint does not work under Linux. At all. At any time (at least on my distro) and even with a very recent kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1791427 Title: Touchpad and/or trackpoint stop working after S3 suspend on Lenovo X1 Carbon 6th Status in linux package in Ubuntu: Incomplete Bug description: Ubuntu 18.04.1 Terminology in case we use different terms: touchpad - just the rectangular touch-sensitive surface below the keyboard (xinput lists it as Synaptics TM3288-011) trackpoint - the red thingy built into the keyboard + 3 physical buttons below the keyboard (trackpoint and buttons are integrated together; listed in xinput as TPPS/2 Elan TrackPoint) On September 7th, 2018, Lenovo has issued a BIOS update (v1.30), which enables proper S3 deep sleep state - users no longer have to patch DSDT tables to get it. It can be enabled in the BIOS settings. In X1 carbon 6th generation models that have NFC, when laptop wakes from suspend by opening the lid, in most cases both touchpad and trackpoint stop working completely. They are also no longer listed when running xinput command. Sometimes just one of them stops working, usually the trackpoint. In some rare cases it is possible to bring them back by using these commands: echo -n none > /sys/devices/platform/i8042/serio1/drvctl echo -n reconnect > /sys/devices/platform/i8042/serio1/drvctl rmmod psmouse modprobe psmouse These worked properly when waking up from S2Idle sleep state (had these in a script that runs after waking the machine from suspend), but with S3 deep sleep these rarely work and the only way to bring back touchpad and/or trackpoint is turning off the machine and turning it on (restart does not help). I could not find any pattern that would show when the input devices stop working or start working again using the commands mentioned above. It's completely random from my perspective. This is happening on the standard issue 4.15.0-33-generic kernel that shipped with my Ubuntu 18.04 (with updates), as well as with newer mainline kernels, such as the newest point versions of 4.17, 4.18 and 4.19 RC2. This happens regardless of whether "blacklist i2c_i801" is commented out in /etc/modprobe.d/blacklist.conf or not. It happens regardless of whether "psmouse.synaptics_intertouch=1" is passed as grub parameter. Presence of TLP does not make it better, nor worse. It appears that non-NFC models are not affected. I know at least one Arch Linux user who has the exact same model, but without this issue. I'm using synaptics driver (no libinput installed), he uses libinput and doesn't have synaptics, if that information is of any use. Libinput does not seem to help. This forum thread also has more details from users who updated their BIOS to get S3 suspend: https://forums.lenovo.com/t5/Linux- Discussion/X1-Carbon-Gen-6-cannot-enter-deep-sleep-S3-state-aka- Suspend-to/td-p/3998182/page/27 Another related thread: https://bbs.archlinux.org/viewtopic.php?id=236367 ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: linux-image-4.15.0-33-generic 4.15.0-33.36 ProcVersionSignature: Ubuntu 4.15.0-33.36-generic 4.15.18 Uname: Linux 4.15.0-33-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: maciej 2651 F...m pulseaudio /dev/snd/controlC0: maciej 2651 F pulseaudio CurrentDesktop: i3 Date: Sat Sep 8 13:45:43 2018 HibernationDevice: RESUME=UUID=3116dcb0-d91e-4b2a-8166-43b7a9a9d36e InstallationDate: Installed on 2018-07-21 (49 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13d3:56b2 IMC Networks Bus 001 Device 002: ID 04b4:0060 Cypress Semiconductor Corp. Wireless optical mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: LENOVO 20KH006KPB ProcFB: 0 EFI VGA 1 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-33-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash psmouse.synaptics_intertouch=1 vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-4.15.0-33-generic N/A linux-backports-modules-4.15.0-33-generic N/A linux-firmware 1.173.1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/31/2018 dmi.bios.vendor: LENOVO dmi.bios.version: N23ET55W (1.30 ) dmi.board.asset.tag: Not Available dmi.board.name: 20KH006KP
[Kernel-packages] [Bug 1889637] Re: Raspberry Pi 3B hangs - dev_pm_opp_set_rate: failed to find current OPP, Failed to get throttled, Failed to change plib frequency; mmc timeout waiting for hardware
** Package changed: ubuntu => linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1889637 Title: Raspberry Pi 3B hangs - dev_pm_opp_set_rate: failed to find current OPP, Failed to get throttled, Failed to change plib frequency; mmc timeout waiting for hardware interrupt Status in linux package in Ubuntu: New Bug description: ### uname -a (64-bit ARM, official image): `Linux ubuntu 5.4.0-1015-raspi #15-Ubuntu SMP Fri Jul 10 05:34:24 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux` ### LSB release (Ubuntu *Server*, focal): Description: Ubuntu 20.04.1 LTS ### Interesting packages installed - zfs-dkms (with initramfs support) @ 0.8.3-1ubuntu12.2 * spl-dkms @ 0.8.3-1ubuntu12.2 - dphys-swapfile ### Hardware model: Raspberry Pi 3 Model B - 32 GiB SD card with root partition * had a swap partition; now unused * migrated to dphys-swapfile - Attached 32 GiB USB stick as zpool for storage (not root FS) - Current PSU reportedly outputs 2.4A supply for the Pi * Still have occasional undervolt warnings (formally requires 2.5A) * Lightning indicator not present however - Connected over wireless networking ## Issue - When under significant computational load at some point, the machine appears to freeze. * I usually log in in a headless manner via ssh, so externally the machine is frozen and I need to pull the power cable - Connectig the HDMI monitor the following messsages appear, in various orders each time: ```terminal cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 9,223,372,036,854,775,698 ({illegible on my photograph, presumably -110}) hwmon hwmon1: Failed to get throttled (-110) raspberrypi-clk firmware clocks: Failed to change plib frequency: -110 mmc0: timeout waiting for hardware interrupt # mmc0 would be the root partition ### ... typically later on in the output rcu: INFO: rcu_sched detected stalls on CPU/tasks rcu: $1-...0: (1 GPs behind) idle=.../1/0x4{more 0s...}02 softirq=66377/66378 {or 26106/26107} fqs={this value varies} INFO: task kworker/{...} blocked for more than 120 seconds TAINTED: PWC OE 5.4.0-1015-raspi #15-ubuntu watchdog: BUG: soft lockup - CPU #3 stuck for 22s! ``` The OPP frequency above looks to me like it may be the cause of the issue, I have added the commas myself to the output but it would appear to be a rubbish value; [this](https://lkml.org/lkml/2020/7/24/683) mailing list archive I found whilst searching for terms found in the messages appears to back up my belief that we should be seeing a sensible CPU frequency here, expressed in integer Hz; the above would be 9.2 EHz assuming Hertz are the base unit, higher still if it's k/M/GHz etc. My most sensible guess is this value has been brought up somewhere as garbage, and understandably the system fails to scale the clock speed, with the resultant crashes presumably due to this. Beyond this point, there is no kernel panic, however the machine locks up externally; does not respond to USB keyboard NumLock and is invisible on the network, with more and more errors gradually being output to the console via the HDMI display; the most notable being the SD card is not responding Just before encountering this issue I had added a swap aprtition, to the SD card, as I had none by default and the system seemed to be hanging when it presumably was sending bad_allocs to userland processes as it failed to allocate memory. As the SD card was mentioned, I have tried a variety of power supplies (as I was getting several undervolt warnings) and eventually removed the swap partition and used a swapfile with `dphys-swapfile` knowing that the way the Pi accesses the SD card is somewhat different from a typical machine. However, neither of these two seems to have resolved the issue, giving further evidence that the frequency scaling may well be the primary issue and the rest is simply the carnage that ensues. ## Steps to Reproduce - Seems to happen sporadically when the machine is under stress, within 5-25 minutes - Currently I am trying to set up a rootless docker compose file * Attempting to pull the images eventually leads to the issue * The images are being downloaded to the zpool on the USB stick and *not* the SD card - The system seems to hang initially waiting on the SDcard to respond to an IRQ - however I believe that the CPU scaling message seems to be the root cause - Do not have any of the importat messages in the `syslog`, I need an external HDMI monitor to get the output on screen from the kernel ring buffer ## Links - [Related AskUbuntu question](https://askubuntu.com/questions/1241412/ubuntu-20-04-lts-hangs-with-error-hwmon1-failed-to-get-throttled-110) - [Potentially related bug - the frequency is
Re: [Kernel-packages] [Bug 1896482] Re: acpi event detection crashes
Hi Alex, my problem came back. Is it possible that livepatch has replaced my working kernel with the broken one again? --Jim On Thu, 24 Sep 2020, Alex Hung wrote: > A test kernel with target patches ready for SRU is available @ > https://people.canonical.com/~alexhung/LP1896482/fixes/ > > The patch in #23 requires three precedent patches. See SRU.log file for > more details. > > Note it is rebased Ubuntu-5.4.0-48.52 now. > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1896482 > > Title: > acpi event detection crashes > > Status in linux package in Ubuntu: > In Progress > > Bug description: > Right after booting, acpi lid open/close is detected as it should be > by the kernel, but some time later it crashes, so I have to manually > suspend the system. The traceback is here: > > Sep 20 11:35:33 laxmi kernel: [232492.303557] [ cut here > ] > Sep 20 11:35:33 laxmi kernel: [232492.303564] WARNING: CPU: 0 PID: 8302 at > kernel/workqueue.c:1416 __queue_work+0x337/0x3f0 > Sep 20 11:35:33 laxmi kernel: [232492.303565] Modules linked in: ccm rfcomm > cmac algif_hash algif_skcipher af_alg bnep nls_iso8859_1 snd_soc_skl_hda_dsp > snd_hda_codec_hdmi snd_soc_hdac_hdmi snd_hda_codec_realtek snd_soc_dmic > snd_hda_codec_generic snd_sof_pci mei_hdcp x86_pkg_temp_thermal > intel_powerclamp intel_rapl_msr coretemp snd_sof_intel_hda_common > snd_soc_hdac_hda snd_sof_intel_hda kvm_intel snd_sof_intel_byt > snd_sof_intel_ipc kvm snd_sof snd_sof_xtensa_dsp snd_hda_ext_core > snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core snd_compress ac97_bus > snd_pcm_dmaengine joydev crct10dif_pclmul ghash_clmulni_intel snd_hda_intel > aesni_intel snd_intel_dspcfg crypto_simd iwlmvm cryptd snd_hda_codec > glue_helper rapl mac80211 snd_hda_core snd_seq_midi snd_hwdep > snd_seq_midi_event libarc4 intel_cstate uvcvideo snd_rawmidi i915 snd_pcm > videobuf2_vmalloc input_leds thinkpad_acpi btusb videobuf2_memops serio_raw > btrtl videobuf2_v4l2 snd_seq btbcm btintel nvram videobuf2_common iwlwif! i processor_thermal_device bluetooth videodev > Sep 20 11:35:33 laxmi kernel: [232492.303600] drm_kms_helper mc wmi_bmof > i2c_algo_bit intel_rapl_common fb_sys_fops ucsi_acpi intel_wmi_thunderbolt > ecdh_generic ledtrig_audio typec_ucsi mei_me syscopyarea hid_multitouch > snd_seq_device sysfillrect cfg80211 ecc sysimgblt mei intel_soc_dts_iosf > typec snd_timer snd soundcore int3403_thermal int340x_thermal_zone acpi_pad > intel_hid int3400_thermal acpi_thermal_rel sparse_keymap mac_hid sch_fq_codel > parport_pc ppdev lp parport drm ip_tables x_tables autofs4 hid_generic > crc32_pclmul nvme psmouse e1000e i2c_i801 thunderbolt intel_lpss_pci > intel_lpss nvme_core idma64 virt_dma i2c_hid hid wmi video pinctrl_cannonlake > pinctrl_intel > Sep 20 11:35:33 laxmi kernel: [232492.303628] CPU: 0 PID: 8302 Comm: > kworker/0:0 Not tainted 5.4.0-47-generic #51-Ubuntu > Sep 20 11:35:33 laxmi kernel: [232492.303629] Hardware name: LENOVO > 20U9001NUS/20U9001NUS, BIOS N2WET19W (1.09 ) 07/01/2020 > Sep 20 11:35:33 laxmi kernel: [232492.303632] Workqueue: kec_query > acpi_ec_event_processor > Sep 20 11:35:33 laxmi kernel: [232492.303635] RIP: > 0010:__queue_work+0x337/0x3f0 > Sep 20 11:35:33 laxmi kernel: [232492.303637] Code: ff 49 8b 9d a0 00 00 00 > e9 aa fd ff ff 65 8b 05 e7 59 15 6d a9 00 01 1f 00 75 0f 65 48 8b 3c 25 c0 6b > 01 00 f6 47 24 20 75 25 <0f> 0b 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f 5d c3 > 0f 0b e9 fd fd > Sep 20 11:35:33 laxmi kernel: [232492.303638] RSP: 0018:b16bc0ebb8f8 > EFLAGS: 00010087 > Sep 20 11:35:33 laxmi kernel: [232492.303640] RAX: 9a2477432600 RBX: > 0002 RCX: 0004 > Sep 20 11:35:33 laxmi kernel: [232492.303641] RDX: 9a2475af4a90 RSI: > 9a2475b03200 RDI: 9a2430215f00 > Sep 20 11:35:33 laxmi kernel: [232492.303642] RBP: b16bc0ebb938 R08: > R09: 0007 > Sep 20 11:35:33 laxmi kernel: [232492.303643] R10: 9a24755ad678 R11: > R12: 9a2475af4a00 > Sep 20 11:35:33 laxmi kernel: [232492.303643] R13: 9a2475b03200 R14: > 2000 R15: 9a2475af4a90 > Sep 20 11:35:33 laxmi kernel: [232492.303645] FS: () > GS:9a247740() knlGS: > Sep 20 11:35:33 laxmi kernel: [232492.303646] CS: 0010 DS: ES: > CR0: 80050033 > Sep 20 11:35:33 laxmi kernel: [232492.303647] CR2: 00c42098b000 CR3: > 00018520a003 CR4: 003606f0 > Sep 20 11:35:33 laxmi kernel: [232492.303648] Call Trace: > Sep 20 11:35:33 laxmi kernel: [232492.303654] ? > acpi_os_release_lock+0xe/0x10 > Sep 20 11:35:33 laxmi kernel: [232492.303657] queue_work_on+0x3b/0x50 > Sep 20 11:35:33 laxmi kernel: [232492.303659] > advance_transaction+0x2b9/0x620 > Sep 20 11:35:33 laxmi kernel: [232492.303661] > acpi_ec_transaction+0x16
[Kernel-packages] [Bug 1901413] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Tags added: focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: New Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1889637] [NEW] Raspberry Pi 3B hangs - dev_pm_opp_set_rate: failed to find current OPP, Failed to get throttled, Failed to change plib frequency; mmc timeout waiting for hardwar
You have been subscribed to a public bug: ### uname -a (64-bit ARM, official image): `Linux ubuntu 5.4.0-1015-raspi #15-Ubuntu SMP Fri Jul 10 05:34:24 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux` ### LSB release (Ubuntu *Server*, focal): Description:Ubuntu 20.04.1 LTS ### Interesting packages installed - zfs-dkms (with initramfs support) @ 0.8.3-1ubuntu12.2 * spl-dkms @ 0.8.3-1ubuntu12.2 - dphys-swapfile ### Hardware model: Raspberry Pi 3 Model B - 32 GiB SD card with root partition * had a swap partition; now unused * migrated to dphys-swapfile - Attached 32 GiB USB stick as zpool for storage (not root FS) - Current PSU reportedly outputs 2.4A supply for the Pi * Still have occasional undervolt warnings (formally requires 2.5A) * Lightning indicator not present however - Connected over wireless networking ## Issue - When under significant computational load at some point, the machine appears to freeze. * I usually log in in a headless manner via ssh, so externally the machine is frozen and I need to pull the power cable - Connectig the HDMI monitor the following messsages appear, in various orders each time: ```terminal cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 9,223,372,036,854,775,698 ({illegible on my photograph, presumably -110}) hwmon hwmon1: Failed to get throttled (-110) raspberrypi-clk firmware clocks: Failed to change plib frequency: -110 mmc0: timeout waiting for hardware interrupt # mmc0 would be the root partition ### ... typically later on in the output rcu: INFO: rcu_sched detected stalls on CPU/tasks rcu: $1-...0: (1 GPs behind) idle=.../1/0x4{more 0s...}02 softirq=66377/66378 {or 26106/26107} fqs={this value varies} INFO: task kworker/{...} blocked for more than 120 seconds TAINTED: PWC OE 5.4.0-1015-raspi #15-ubuntu watchdog: BUG: soft lockup - CPU #3 stuck for 22s! ``` The OPP frequency above looks to me like it may be the cause of the issue, I have added the commas myself to the output but it would appear to be a rubbish value; [this](https://lkml.org/lkml/2020/7/24/683) mailing list archive I found whilst searching for terms found in the messages appears to back up my belief that we should be seeing a sensible CPU frequency here, expressed in integer Hz; the above would be 9.2 EHz assuming Hertz are the base unit, higher still if it's k/M/GHz etc. My most sensible guess is this value has been brought up somewhere as garbage, and understandably the system fails to scale the clock speed, with the resultant crashes presumably due to this. Beyond this point, there is no kernel panic, however the machine locks up externally; does not respond to USB keyboard NumLock and is invisible on the network, with more and more errors gradually being output to the console via the HDMI display; the most notable being the SD card is not responding Just before encountering this issue I had added a swap aprtition, to the SD card, as I had none by default and the system seemed to be hanging when it presumably was sending bad_allocs to userland processes as it failed to allocate memory. As the SD card was mentioned, I have tried a variety of power supplies (as I was getting several undervolt warnings) and eventually removed the swap partition and used a swapfile with `dphys-swapfile` knowing that the way the Pi accesses the SD card is somewhat different from a typical machine. However, neither of these two seems to have resolved the issue, giving further evidence that the frequency scaling may well be the primary issue and the rest is simply the carnage that ensues. ## Steps to Reproduce - Seems to happen sporadically when the machine is under stress, within 5-25 minutes - Currently I am trying to set up a rootless docker compose file * Attempting to pull the images eventually leads to the issue * The images are being downloaded to the zpool on the USB stick and *not* the SD card - The system seems to hang initially waiting on the SDcard to respond to an IRQ - however I believe that the CPU scaling message seems to be the root cause - Do not have any of the importat messages in the `syslog`, I need an external HDMI monitor to get the output on screen from the kernel ring buffer ## Links - [Related AskUbuntu question](https://askubuntu.com/questions/1241412/ubuntu-20-04-lts-hangs-with-error-hwmon1-failed-to-get-throttled-110) - [Potentially related bug - the frequency issue seems to be the same, however the specific cause and a workaround are different](https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1875148) ## Extra - Attaching /proc/cpuinfo - Please let me know if any more diagnostics required; I would use hardinfo or inxi but both want to install large parts of X which I don't want to do ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: bot-comment raspberrypi -- Raspberry Pi 3B hangs - dev_pm_opp_set_rate: failed to find current OPP, Failed to get throttled, Failed
[Kernel-packages] [Bug 1861941] Autopkgtest regression report (systemd/245.4-4ubuntu3.3)
All autopkgtests for the newly accepted systemd (245.4-4ubuntu3.3) for focal have finished running. The following regressions have been reported in tests triggered by the package: linux-hwe-5.8/5.8.0-25.26~20.04.1 (armhf) python-dbusmock/0.19-1 (armhf) lxc/1:4.0.2-0ubuntu1 (amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/focal/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1861941 Title: bcache by-uuid links disappear after mounting bcache0 Status in bcache-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Fix Released Status in bcache-tools source package in Bionic: Fix Released Status in systemd source package in Bionic: Won't Fix Status in bcache-tools source package in Focal: Fix Released Status in systemd source package in Focal: Fix Committed Bug description: SRU TEAM: The last 2 commits show a summary for the merges/changes I added some specific (to Bionic) notes in the template. Thanks! [Impact] * bcache-tools udev created symlinks might disappear when other udev events are processed for the same devices. * after mkfs.XXX in /dev/bcacheY you might face a condition where /dev/bcache/by-{uuid,label}/zzz symlinks are gone. * /dev/bcache/by-{uuid,label}/ symlinks are important so bcache devices can be addressed by their UUIDs and not the ordering they were assembled (MAAS depends on this feature, for example). * it was also discussed in this bug that systemd-udev should *not* populate /dev/disk/by-uuid/ with symlinks of disks that were bcache backing devices. this was turned into a discussion whether blkid should report those or not, and this discussion "died" after sometime. This last item is what the systemd update is all about: to disallow /dev/disk/by-XXX/ creation for bcache backing devices (a simple change that will reduce end users confusion). [Test Case] * The reproducer script is here: https://paste.ubuntu.com/p/37KGy2Smnp/ * Bionic can't reproduce the issue with the 18.04 kernel, nor with the HWE kernel. Nevertheless, it is preferable that Bionic also do the same thing: to read bcache superblock and feed environment for /dev/bcache/by-{uuid,label} symlinks creation. [Regression Potential] * We are not depending on bcache device udev events any more when creating the /dev/bcache/by-{uuid,label}/ symlinks. Instead, we are depending on a wrapper script that heads bcache device superblock. If there is a bug in this wrapper the symlinks wouldn't work. * Previously we were thinking in asking the kernel team to remove the bcache udev event delta script they've done for previous case (LP: #1729145). It creates the udev events that were being read and filling the symlinks. We decided not to remove those (just from Groovy and on) so we don't need to worry on Breaks/Conflicts in between the kernel package and bcache-tools (and udev)). * Long story short: kernel will continue to emit bcache udev events as it did previously but now those events won't be used by anything - after installing this SRU - because udev wrapper script is doing this job (and doing it properly) [Other Info] - Original Description: 1. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 2. root@ubuntu:~# lsb_release -rd Description: Ubuntu Focal Fossa (development branch) Release: 20.04 root@ubuntu:~# apt-cache policy linux-image-virtual linux-image-virtual: Installed: 5.4.0.12.15 Candidate: 5.4.0.12.15 Version table: *** 5.4.0.12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status root@ubuntu:~# apt-cache policy linux-image-5.4.0-12-generic linux-image-5.4.0-12-generic: Installed: 5.4.0-12.15 Candidate: 5.4.0-12.15 Version table: *** 5.4.0-12.15 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status 3. mount /dev/bcache0 && ls -al /dev/bcache/by-uuid/ + ls -al /dev/bcache/by-uuid/ total 0 drwxr-xr-x 2 root root 60 Feb 4 23:31 . drwxr-xr-x 3 root root 60 Feb 4 23:31 .. lrwxrwxrwx 1 root root 13 Feb 4 23:31 abdfd1f6-44ce-4266-91db-24667b9ae51a -> ../../bcache0 4. root@ubuntu:~# ls -al /dev/bcache/by-uuid ls: cannot access '/dev/bcache/by-uuid': No such file or directory ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-12-generic
[Kernel-packages] [Bug 1892358] Autopkgtest regression report (systemd/245.4-4ubuntu3.3)
All autopkgtests for the newly accepted systemd (245.4-4ubuntu3.3) for focal have finished running. The following regressions have been reported in tests triggered by the package: linux-hwe-5.8/5.8.0-25.26~20.04.1 (armhf) python-dbusmock/0.19-1 (armhf) lxc/1:4.0.2-0ubuntu1 (amd64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/focal/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1892358 Title: autopkgtest success rate dropped inhibiting proposed migration Status in build-essential package in Ubuntu: Invalid Status in glib2.0 package in Ubuntu: Invalid Status in iputils package in Ubuntu: Invalid Status in kbd package in Ubuntu: Invalid Status in linux-meta package in Ubuntu: Invalid Status in ntpsec package in Ubuntu: Invalid Status in qemu package in Ubuntu: Invalid Status in systemd package in Ubuntu: Fix Released Status in util-linux package in Ubuntu: Invalid Status in linux-meta source package in Bionic: New Status in systemd source package in Bionic: Fix Committed Status in build-essential source package in Focal: Confirmed Status in linux-meta source package in Focal: New Status in qemu source package in Focal: Confirmed Status in systemd source package in Focal: Fix Committed Status in util-linux source package in Focal: Confirmed Bug description: [impact] autopkgtests are failing/flaky and prevent other packages from migrating to -updates [test case] check autopkgtest history [regression potential] in regard to the changed test cases, any regression would likely result in either an incorrectly passed test, or an incorrectly failed test. [scope] for systemd, this is needed for x, b, and f. tests in g appear to be mostly stable, but I've opened MR (linked from this bug) to update the tests there as well. i don't plan to update x, as it's reaching ESM in ~6 months, and backporting the test fixes is more work than just a simple code copy, since there are additional differences/changes needed in the older version of systemd (and python3). the failing/flaky tests in x have been like that forever, and people have just retried them; we can keep retrying them until x moves into ESM next year. [original description] Hi, we had such cases in the past like bug 1817721 for bionic and maybe bug 1892130 is about the same as well. There were more but I didn't want to search for all of them - what I checked is that there are no open ones clearly pointing out the recent further drop in already flaky subtests. In particular the tests "tests-in-lxd" and "systemd-fsckd" were known to be flaky before, but got even worse. Here stats of the last 40 runs, it might be a coincidences that this is after 246-2ubuntu1 landed. Could as well be any other change groovy amd64 tests-in-lxd (F 42% S 0% B 10% => P 45%/) BFFFBFF.B.F.F...FBF build-login(F 0% S 0% B 10% => P 87%/) B...B...BB. unit-config(F 0% S 0% B 10% => P 87%/) B...B...BB. networkd-testpy(F 0% S 0% B 10% => P 87%/) B...B...BB. boot-and-services (F 0% S 0% B 10% => P 87%/) B...B...BB. boot-smoke (F 0% S 0% B 10% => P 87%/) B...B...BB. logind (F 0% S 0% B 10% => P 87%/) B...B...BB. storage(F 0% S 0% B 10% => P 87%/) B...B...BB. upstream (F 35% S 0% B 10% => P 52%/) ..FFB.FFF.FFBFF.B.F.F..FFBF udev (F 0% S 0% B 10% => P 87%/) B...B...BB. systemd-fsckd (F 37% S 0% B 10% => P 50%/) BFFFB.FF...FB.F..B. root-unittests (F 0% S 0% B 10% => P 87%/) B...B...BB. ppc64el tests-in-lxd (F 25% S 0% B 0% => P 75%/) FFFFF.F. systemd-fsckd (F 35% S 0% B 0% => P 65%/) FFF...FFFFF.F..F root-unittests (F 2% S 0% B 0% => P 97%/) ..F. s390x tests-in-lxd (F 52% S 0% B 0% => P 47%/) FFF.FFF.FF....F. timedated (F 2% S 0% B 0% => P 97%/) ..
[Kernel-packages] [Bug 1901413] Re: Sound Blaster Audigy 5/Rx cannot be configured as input/output
** Changed in: linux (Ubuntu) Status: Incomplete => New ** Changed in: pulseaudio (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: New Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1894627] Re: [nvidia] Web browser distorted after hibernation/power save when idle
Please don't discuss that here. You should open a new bug by running: ubuntu-bug linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-440 in Ubuntu. https://bugs.launchpad.net/bugs/1894627 Title: [nvidia] Web browser distorted after hibernation/power save when idle Status in chromium-browser package in Ubuntu: Triaged Status in nvidia-graphics-drivers-340 package in Ubuntu: Won't Fix Status in nvidia-graphics-drivers-440 package in Ubuntu: Won't Fix Bug description: https://bugs.chromium.org/p/chromium/issues/detail?id=791913 --- my laptop goes to hibernation/power saver mode when my computer is idle. every time I bring my computer back up, the screen distorted. I have to close all my browsers. Sometimes, shut down the computer. Description: Ubuntu 20.04.1 LTS Release: 20.04 N: Unable to locate package pkgname ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55 Uname: Linux 5.4.0-45-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 440.100 Fri May 29 08:45:51 UTC 2020 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2) ApportVersion: 2.20.11-0ubuntu27.8 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Mon Sep 7 03:33:23 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia, 440.100, 5.4.0-42-generic, x86_64: installed nvidia, 440.100, 5.4.0-45-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation UHD Graphics 630 (Mobile) [8086:3e9b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company UHD Graphics 630 (Mobile) [103c:8466] NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] [10de:1c8c] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company GP107M [GeForce GTX 1050 Ti Mobile] [103c:8466] InstallationDate: Installed on 2020-06-23 (75 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 05c8:03ab Cheng Uei Precision Industry Co., Ltd (Foxlink) HP Wide Vision HD Camera Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP OMEN by HP Laptop ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-45-generic root=UUID=98265a4d-5439-415e-b43c-904265a8559a ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/24/2019 dmi.bios.vendor: AMI dmi.bios.version: F.09 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 8466 dmi.board.vendor: HP dmi.board.version: 68.21 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAMI:bvrF.09:bd04/24/2019:svnHP:pnOMENbyHPLaptop:pvr:rvnHP:rn8466:rvr68.21:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV HP OMEN dmi.product.name: OMEN by HP Laptop dmi.product.sku: 4CC49UA#ABA dmi.sys.vendor: HP modified.conffile..etc.default.apport: # set this to 0 to disable apport, or to 1 to enable it # you can temporarily override this with # sudo service apport start force_start=1 enabled=0 mtime.conffile..etc.default.apport: 2020-06-26T00:47:21.524860 version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1894627/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe :
[Kernel-packages] [Bug 1246981] Re: Bluetooth devices fail to re-connect after sleep.
i just had a bug for 20.10 merged into this one. note that in my case, this just started happening since upgrading to 20.10, and it happens with multiple different brands of bluetooth adaptor. as well, if use my keyboard to open the bluetooth settings panel in gnome, then everything immediately reconnects as soon as the settings load, so it doesn't appear to be anything to do with hardware, but instead a bug in terms of what gnome services do when the system resumes. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1246981 Title: Bluetooth devices fail to re-connect after sleep. Status in bluez package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: This exact harware was working faultlessly in 13.04. Since re- installing at 13.10 the mouse consistently failes to reconnect after the device either hybernates or ever goes to screen saver sleep. I have to remove the dive and re-add it each time (which works well). There are other issues with the bluetooth stack as well in that I have not found any way to use bluetooth tethering to my mobile which again worked well and was easy to configure in 13.04 Peter. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: bluetooth 4.101-0ubuntu8b1 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 Date: Fri Nov 1 16:44:37 2013 InstallationDate: Installed on 2013-10-19 (13 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) InterestingModules: bnep rfcomm btusb bluetooth MachineType: Dell Inc. Latitude E6530 MarkForUpload: True PackageArchitecture: all ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=8283de78-9264-42bf-a8b4-25643fa1475f ro quiet splash SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/13/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 07Y85M dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd12/13/2012:svnDellInc.:pnLatitudeE6530:pvr01:rvnDellInc.:rn07Y85M:rvrA01:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6530 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: 20:16:D8:9C:38:E5 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:1817731 acl:117432 sco:0 events:5271 errors:0 TX bytes:37955 acl:131 sco:0 commands:5096 errors:0 syslog: Nov 1 14:50:19 pnunn-Latitude-E6530 bluetoothd[1015]: Discovery session 0x7f6489f7b450 with :1.582 activated Nov 1 14:50:25 pnunn-Latitude-E6530 bluetoothd[1015]: Unknown command complete for opcode 37 Nov 1 14:50:28 pnunn-Latitude-E6530 bluetoothd[1015]: Stopping discovery Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211132] input: Microsoft Bluetooth Notebook Mouse 5000 as /devices/pci:00/:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input29 Nov 1 14:50:36 pnunn-Latitude-E6530 kernel: [60934.211646] hid-generic 0005:045E:0700.000C: input,hidraw3: BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on 20:16:d8:9c:38:e5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1246981/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1550779] Re: Black screen flickering and [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
** No longer affects: xorg-server (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1550779 Title: Black screen flickering and [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun Status in linux package in Ubuntu: Confirmed Bug description: Upgraded linux-image-extra-4.2.0-30-generic I see graphic glitches, looks like the graphic buffer gets screwed up - funny repetition's patterns (back in time glitches) - black screen (<1sec) - graphic errors I can influence the severity of the issue with switching windows and using certain programs, e.g. Google Maps in chrome causes this issue reproducibly dmesg | grep i915 [2.726864] [drm] Initialized i915 1.6.0 20150522 for :00:02.0 on minor 0 [2.792005] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [3.471092] i915 :00:02.0: fb0: inteldrmfb frame buffer device [3.471093] i915 :00:02.0: registered panic notifier [9.573129] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun [9.574847] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [9.574895] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun linux-image-extra-4.2.0-27-generic works find ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 4.2.0-30.36-generic 4.2.8-ckt3 Uname: Linux 4.2.0-30-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.19.1-0ubuntu5 Architecture: amd64 BootLog: CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat Feb 27 20:26:07 2016 DistUpgraded: Fresh install DistroCodename: wily DistroVariant: ubuntu DkmsStatus: virtualbox, 5.0.14, 4.2.0-27-generic, x86_64: installed virtualbox, 5.0.14, 4.2.0-30-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21da] InstallationDate: Installed on 2016-02-11 (15 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) MachineType: LENOVO 42912XG ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-4.2.0-30-generic root=UUID=cb34d7bb-9316-49b3-aa94-4e2a3512168f ro rootflags=subvol=@ noprompt quiet SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/18/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET69WW (1.39 ) dmi.board.asset.tag: Not Available dmi.board.name: 42912XG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET69WW(1.39):bd07/18/2013:svnLENOVO:pn42912XG:pvrThinkPadX220:rvnLENOVO:rn42912XG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 42912XG dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12.2+15.10.20151202-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.64-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0+git20150819-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150808-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3 xserver.bootTime: Sat Feb 27 20:25:23 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 12359 vendor SEC xserver.version: 2:1.17.2-1ubuntu9.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1550779/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1896578] Re: raid10: Block discard is very slow, causing severe delays for mkfs and fstrim operations
** Description changed: BugLink: https://bugs.launchpad.net/bugs/1896578 [Impact] Block discard is very slow on Raid10, which causes common use cases which invoke block discard, such as mkfs and fstrim operations, to take a very long time. For example, on a i3.8xlarge instance on AWS, which has 4x 1.9TB NVMe devices which support block discard, a mkfs.xfs operation on Raid 10 takes between 8 to 11 minutes, where the same mkfs.xfs operation on Raid 0, takes 4 seconds. The bigger the devices, the longer it takes. The cause is that Raid10 currently uses a 512k chunk size, and uses this for the discard_max_bytes value. If we need to discard 1.9TB, the kernel splits the request into millions of 512k bio requests, even if the underlying device supports larger requests. For example, the NVMe devices on i3.8xlarge support 2.2TB of discard at once: $ cat /sys/block/nvme0n1/queue/discard_max_bytes 2199023255040 $ cat /sys/block/nvme0n1/queue/discard_max_hw_bytes 2199023255040 Where the Raid10 md device only supports 512k: $ cat /sys/block/md0/queue/discard_max_bytes 524288 $ cat /sys/block/md0/queue/discard_max_hw_bytes 524288 If we perform a mkfs.xfs operation on the /dev/md array, it takes over 11 minutes and if we examine the stack, it is stuck in blkdev_issue_discard() $ sudo cat /proc/1626/stack [<0>] wait_barrier+0x14c/0x230 [raid10] [<0>] regular_request_wait+0x39/0x150 [raid10] [<0>] raid10_write_request+0x11e/0x850 [raid10] [<0>] raid10_make_request+0xd7/0x150 [raid10] [<0>] md_handle_request+0x123/0x1a0 [<0>] md_submit_bio+0xda/0x120 [<0>] __submit_bio_noacct+0xde/0x320 [<0>] submit_bio_noacct+0x4d/0x90 [<0>] submit_bio+0x4f/0x1b0 [<0>] __blkdev_issue_discard+0x154/0x290 [<0>] blkdev_issue_discard+0x5d/0xc0 [<0>] blk_ioctl_discard+0xc4/0x110 [<0>] blkdev_common_ioctl+0x56c/0x840 [<0>] blkdev_ioctl+0xeb/0x270 [<0>] block_ioctl+0x3d/0x50 [<0>] __x64_sys_ioctl+0x91/0xc0 [<0>] do_syscall_64+0x38/0x90 [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [Fix] Xiao Ni has developed a patchset which resolves the block discard performance problems. These commits have now landed in 5.10-rc1. commit 2628089b74d5a64bd0bcb5d247a18f78d7b6f4d0 Author: Xiao Ni Date: Tue Aug 25 13:42:59 2020 +0800 Subject: md: add md_submit_discard_bio() for submitting discard bio Link: https://github.com/torvalds/linux/commit/2628089b74d5a64bd0bcb5d247a18f78d7b6f4d0 commit 8650a889017cb1f6ea6813ccf83a2e9f6fa49dd3 Author: Xiao Ni Date: Tue Aug 25 13:43:00 2020 +0800 Subject: md/raid10: extend r10bio devs to raid disks Link: https://github.com/torvalds/linux/commit/8650a889017cb1f6ea6813ccf83a2e9f6fa49dd3 commit f046f5d0d79cdb968f219ce249e497fd1accf484 Author: Xiao Ni Date: Tue Aug 25 13:43:01 2020 +0800 Subject: md/raid10: pull codes that wait for blocked dev into one function Link: https://github.com/torvalds/linux/commit/f046f5d0d79cdb968f219ce249e497fd1accf484 commit bcc90d280465ebd51ab8688be86e1f00c62dccf9 Author: Xiao Ni Date: Wed Sep 2 20:00:22 2020 +0800 Subject: md/raid10: improve raid10 discard request Link: https://github.com/torvalds/linux/commit/bcc90d280465ebd51ab8688be86e1f00c62dccf9 commit d3ee2d8415a6256c1c41e1be36e80e640c3e6359 Author: Xiao Ni Date: Wed Sep 2 20:00:23 2020 +0800 Subject: md/raid10: improve discard request for far layout Link: https://github.com/torvalds/linux/commit/d3ee2d8415a6256c1c41e1be36e80e640c3e6359 There is also an additional commit which is required, and was merged after "md/raid10: improve raid10 discard request" was merged. The following commits enable Radid10 to use large discards, instead of splitting into many bios, since the technical hurdles have now been removed. commit e0910c8e4f87bb9f767e61a778b0d9271c4dc512 Author: Mike Snitzer Date: Thu Sep 24 13:14:52 2020 -0400 Subject: dm raid: fix discard limits for raid1 and raid10 Link: https://github.com/torvalds/linux/commit/e0910c8e4f87bb9f767e61a778b0d9271c4dc512 commit f0e90b6c663a7e3b4736cb318c6c7c589f152c28 Author: Mike Snitzer Date: Thu Sep 24 16:40:12 2020 -0400 Subject: dm raid: remove unnecessary discard limits for raid10 Link: https://github.com/torvalds/linux/commit/f0e90b6c663a7e3b4736cb318c6c7c589f152c28 All the commits mentioned follow a similar strategy which was implemented in Raid0 in the below commit, which was merged in 4.12-rc2, which fixed block discard performance issues in Raid0: commit 29efc390b9462582ae95eb9a0b8cd17ab956afc0 Author: Shaohua Li Date: Sun May 7 17:36:24 2017 -0700 Subject: md/md0: optimize raid0 discard handling Link: https://github.com/torvalds/linux/commit/29efc390b9462582ae95eb9a0b8cd17ab956afc0 The commits more or less cherry pick to the 5.8, 5.4 and 4.15 kernels, with the following minor fixups: 1) submit_bio_noacc
[Kernel-packages] [Bug 1749961] Re: xhci_hcd: TRB DMA errors reported with ASMedia ASM1142 USB 3.1 Controller
Confirmed this continues on Ubuntu 20.10. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1749961 Title: xhci_hcd: TRB DMA errors reported with ASMedia ASM1142 USB 3.1 Controller Status in linux package in Ubuntu: In Progress Status in linux source package in Trusty: Won't Fix Status in linux source package in Xenial: Confirmed Status in linux source package in Bionic: Confirmed Status in linux source package in Focal: Confirmed Status in linux package in Debian: Confirmed Bug description: It was observed that while trying to use a 4K USB webcam connected to USB port provided by ASMedia ASM1142 USB 3.1 Controller, the webcam does not work and kernel log shows the following messages: [431.928016] xhci_hcd :12:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [431.928021] xhci_hcd :12:00.0: Looking for event-dma 003f3330e020 trb-start 003f3330e000 trb-end 003f3330e000 seg-start 003f3330e000 seg-end 003f3330eff0 [431.928024] xhci_hcd :12:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [431.928026] xhci_hcd :12:00.0: Looking for event-dma 003f3330e030 trb-start 003f3330e000 trb-end 003f3330e000 seg-start 003f3330e000 seg-end 003f3330eff0 [431.928027] xhci_hcd :12:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [431.928029] xhci_hcd :12:00.0: Looking for event-dma 003f3330e050 trb-start 003f3330e000 trb-end 003f3330e000 seg-start 003f3330e000 seg-end 003f3330eff0 [431.928386] xhci_hcd :12:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 A similar issue was already reported on Launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1667750 The fix to this issue seems to be the following patch: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9da5a109 Tests in our scenario with this patch proved still broken. Our next approach is to modify the patch a bit and re-test. This LP will be used to document our progress in the investigation. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1749961/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901779] PaInfo.txt
apport information ** Attachment added: "PaInfo.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428117/+files/PaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMe
[Kernel-packages] [Bug 1901779] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428131/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installat
[Kernel-packages] [Bug 1901779] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428136/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Ins
[Kernel-packages] [Bug 1901779] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428125/+files/acpidump.txt ** Description changed: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) MachineType: Dell Inc. Inspiron 7786 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 S
[Kernel-packages] [Bug 1901779] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428121/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Ins
[Kernel-packages] [Bug 1901779] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428143/+files/acpidump.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installat
[Kernel-packages] [Bug 1901779] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428139/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Ins
[Kernel-packages] [Bug 1901779] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428142/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Insta
[Kernel-packages] [Bug 1901779] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428112/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedi
[Kernel-packages] [Bug 1901779] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428118/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Ins
[Kernel-packages] [Bug 1901779] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428140/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMe
[Kernel-packages] [Bug 1901779] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428113/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installat
[Kernel-packages] [Bug 1901779] Re: Wireless-AC 9560 not working after reboot
I add all information after shutdown and boot again because after reboot I don't have access to the internet... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedia: Ubuntu 20.10 "Gro
[Kernel-packages] [Bug 1901779] AlsaInfo.txt
apport information ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428126/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installat
[Kernel-packages] [Bug 1901779] PaInfo.txt
apport information ** Attachment added: "PaInfo.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428135/+files/PaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMe
[Kernel-packages] [Bug 1901779] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428128/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) I
[Kernel-packages] [Bug 1901779] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428119/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 d
[Kernel-packages] [Bug 1901779] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428130/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedi
[Kernel-packages] [Bug 1901779] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428109/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedia:
[Kernel-packages] [Bug 1901779] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428123/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMe
[Kernel-packages] [Bug 1901779] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428127/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedia:
[Kernel-packages] [Bug 1901779] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428116/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installatio
[Kernel-packages] [Bug 1901779] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428141/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMe
[Kernel-packages] [Bug 1901779] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428132/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedi
[Kernel-packages] [Bug 1901779] Re: Wireless-AC 9560 not working after reboot
apport information ** Tags added: apport-collected groovy ** Description changed: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu50 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: klitvinov 1947 F pulseaudio + /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio + /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.10 + InstallationDate: Installed on 2020-10-26 (1 days ago) + InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) + MachineType: Dell Inc. Inspiron 7786 + Package: linux (not installed) + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinu
[Kernel-packages] [Bug 1901779] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428134/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installatio
[Kernel-packages] [Bug 1901779] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428114/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMedi
[Kernel-packages] [Bug 1901779] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428138/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago)
[Kernel-packages] [Bug 1901779] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428133/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installatio
[Kernel-packages] [Bug 1901779] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428110/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) I
[Kernel-packages] [Bug 1901779] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428137/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 d
[Kernel-packages] [Bug 1901779] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428129/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installat
[Kernel-packages] [Bug 1901779] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428124/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) InstallationMe
[Kernel-packages] [Bug 1901779] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428122/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Install
[Kernel-packages] [Bug 1901779] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428120/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago)
[Kernel-packages] [Bug 1901779] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428111/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installat
[Kernel-packages] [Bug 1901779] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1901779/+attachment/5428115/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: klitvinov 1947 F pulseaudio /dev/snd/pcmC0D0c: klitvinov 1947 F...m pulseaudio /dev/snd/pcmC0D0p: klitvinov 1947 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.10 InstallationDate: Installed on 2020-10-26 (1 days ago) Installatio
[Kernel-packages] [Bug 1901779] Re: Wireless-AC 9560 not working after reboot
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Confirmed Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901779/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901755] Re: "btrfs subvolume list" sporadically segfaults with linux-image-5.4.0-52-generic
I'm currently not running the affected kernel version, since the system is being used as a backup-target (hence the high subvolume count), therefore I cannot provide the requested log. My initial bug report contains the information that should help determining which commit is missing from the kernel. ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901755 Title: "btrfs subvolume list" sporadically segfaults with linux- image-5.4.0-52-generic Status in linux package in Ubuntu: Confirmed Bug description: On a BTRFS volume with a lot of subvolumes, I get sporadic segfaults on "btrfs subvolume list", about 1/3 of the time. This is on Ubuntu 20.04. linux-image-5.4.0-48-generic does not experience those segfaults. On #btrfs on freenode, it was pointed out that 5.4.0-52.57 seems to have a regression but not the fix for it committed. To quote from the IRC message: > 5.4.0-52.57 has a regression (a48b73eca4ce btrfs: fix potential deadlock in the search ioctl) and not the fix (1c78544eaa46 btrfs: fix wrong address when faulting in pages in the search ioctl) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901755/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1871794] Re: [Bluetooth] No audio output/input in HSP/HFP mode
Same problem using Aeropex by AfterShokz (AVRCP) headset on 20.04 (xps9310). Quick-and-dirty workaround: - download the 1.190 firmware package (http://mirrors.edge.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.190.tar.gz) - copy the relevant ibt firmware and parameters (sfi, ddc) to /usr/lib/firmware/intel (ibt-19-0-4 in my case) - backup of the old files highly recommended ;) - reboot, reconnect. My headset is now working both in A2DP and HFP/HSP modes. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1871794 Title: [Bluetooth] No audio output/input in HSP/HFP mode Status in bluez package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm testing with Sony bluetooth headset SBH20, works fine in A2DP profile, but I can't get audio input and output work in HSP/HFP profile. [Reproduce steps] 1. Scan and pair BT headset in Bluetooth setting 2. Switch to HSP/HFP profile in Sound setting 3. Test sound output/input [Machine information] ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Uname: Linux 5.4.0-21-generic x86_64 ApportVersion: 2.20.11-0ubuntu25 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1359 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Thu Apr 9 16:26:52 2020 InstallationDate: Installed on 2020-04-09 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) SourcePackage: pulseaudio Symptom: audio Symptom_Card: SBH20 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1359 F pulseaudio Symptom_Type: No sound at all Title: [SBH20, recording] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/17/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.0.13 dmi.board.name: 0188D1 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 31 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.0.13:bd09/17/2019:svnDellInc.:pnXPS1373902-in-1:pvr:rvnDellInc.:rn0188D1:rvrA00:cvnDellInc.:ct31:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 7390 2-in-1 dmi.product.sku: 08B0 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1871794/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901779] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1901779 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Incomplete Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. To
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
Hello fossfreedom, or anyone else affected, Accepted alsa-lib into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/alsa- lib/1.2.2-2.1ubuntu2.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901779] [NEW] Wireless-AC 9560 not working after reboot
Public bug reported: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: base HW address: 18:1d:ea:7e:f4:4b iwlwifi :00:14.3 wlo1: renamed from wlan0 But if I reboot the system I got "No WiFi Adapter available" Kernel boot log (after reboot): iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3: WRT: Overriding region id 10 iwlwifi :00:14.3: WRT: Overriding region id 11 iwlwifi :00:14.3: WRT: Overriding region id 15 iwlwifi :00:14.3: WRT: Overriding region id 16 iwlwifi :00:14.3: WRT: Overriding region id 18 iwlwifi :00:14.3: WRT: Overriding region id 19 iwlwifi :00:14.3: WRT: Overriding region id 20 iwlwifi :00:14.3: WRT: Overriding region id 21 iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM iwlwifi :00:14.3: Found debug configuration: 0 iwlwifi :00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm iwlwifi :00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 iwlwifi :00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318 iwlwifi :00:14.3: Microcode SW error detected. Restarting 0x0. iwlwifi :00:14.3: Not valid error log pointer 0x for Init uCode iwlwifi :00:14.3: Fseq Registers: iwlwifi :00:14.3: 0x57EBE7FA | FSEQ_ERROR_CODE iwlwifi :00:14.3: 0x | FSEQ_TOP_INIT_VERSION iwlwifi :00:14.3: 0x3DEFF6EE | FSEQ_CNVIO_INIT_VERSION iwlwifi :00:14.3: 0xA384 | FSEQ_OTP_VERSION iwlwifi :00:14.3: 0xAA22218C | FSEQ_TOP_CONTENT_VERSION iwlwifi :00:14.3: 0x31101204 | FSEQ_ALIVE_TOKEN iwlwifi :00:14.3: 0x7B5E8EE9 | FSEQ_CNVI_ID iwlwifi :00:14.3: 0x48382987 | FSEQ_CNVR_ID iwlwifi :00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP iwlwifi :00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP iwlwifi :00:14.3: 0x485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM iwlwifi :00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR iwlwifi :00:14.3: SecBoot CPU1 Status: 0x3, CPU2 Status: 0x226c iwlwifi :00:14.3: Failed to start INIT ucode: -5 iwlwifi :00:14.3: Failed to run INIT ucode: -5 I try many cases from this reporting system but got no effect. Can you help me with it? Thank you in advance. ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901779 Title: Wireless-AC 9560 not working after reboot Status in linux package in Ubuntu: Incomplete Bug description: Hello. I had Laptop Dell Inspiron 7786 Ubuntu 5.8.0-25.26-generic 5.8.14 After turn down and start the system WiFi work normally. Kernel boot log: iwlwifi :00:14.3: enabling device ( -> 0002) iwlwifi :00:14.3: WRT: Overriding region id 0 iwlwifi :00:14.3: WRT: Overriding region id 1 iwlwifi :00:14.3: WRT: Overriding region id 2 iwlwifi :00:14.3: WRT: Overriding region id 3 iwlwifi :00:14.3: WRT: Overriding region id 4 iwlwifi :00:14.3: WRT: Overriding region id 6 iwlwifi :00:14.3: WRT: Overriding region id 8 iwlwifi :00:14.3: WRT: Overriding region id 9 iwlwifi :00:14.3
[Kernel-packages] [Bug 1887490] Re: [FFe/SRU] Add/Backport EPYC-v3 and EPYC-Rome CPU model
Hello Markus, or anyone else affected, Accepted libvirt into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/libvirt/6.0.0-0ubuntu8.5 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: libvirt (Ubuntu Focal) Status: Triaged => Fix Committed ** Tags removed: verification-done verification-done-focal ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1887490 Title: [FFe/SRU] Add/Backport EPYC-v3 and EPYC-Rome CPU model Status in libvirt package in Ubuntu: Fix Released Status in linux package in Ubuntu: Fix Released Status in qemu package in Ubuntu: Fix Released Status in libvirt source package in Focal: Fix Committed Status in linux source package in Focal: Fix Released Status in qemu source package in Focal: Fix Released Bug description: [Impact] * CPU definitions are added to libvirt as these CPUs are known and added to qemu for execution. And due to that over time some are considered missing in former releases. * To really benefit from the new features of these chips they have to be known, therefore new type additions done by upstream should be backported if they generally apply and do not depend on SRU-critical changes. * This backports three upstream fixes that just add definitions (no control flow changes) [Test Case] * Check if it has an EPYC-Rome entry in /usr/share/libvirt/cpu_map/index.xml and the file included there exists. * Define a guest like: EPYC-Rome You can only "really" start this on a system with the matching HW. But even on others it will change from: error: internal error: Unknown CPU model EPYC-Rome to being unable to start for some features missing. * libvirt probes a system if a named cpu can be used, after the fix this should include EPYC-Rome $ virsh domcapabilities | grep EPYC EPYC-IBPB EPYC [Regression Potential] * Usually these type additions are safe unless they add control flow changes (e.g. to handle yet unknown types of registers or such) but that isn't the case here. A regression if any is to be expected on systems that are close to the newly added type(s). Those will after the update be detected as such if e.g. host-model is used. If then running on a mixed cluster of updated/non-updated systems migrations will only work if the target is updated as well. [Other Info] * This is the first build since glibc 2.32 arrived in groovy, hence we need to be careful of the fix done for bug 1892826. It has to be checked if the linking is fine after the rebuild. The workload still works in groovy despite 2.32 being present (I'd ahve expected it doesn't), so we will keep the revert as-is for now. To be sure that adds two tests that shall be done: - check the linking to point to libtirpc instead of glibc $ eu-readelf -a /usr/lib/libvirt/libvirt_lxc | grep xdr_uint64 | grep GLOBAL Was pointing to glibc, does it still and if so does it work (see below)? - run the autopkgtest cases as the LXC tests would trigger an issue if there is one ## Qemu SRU ## [Impact] * CPU definitions are added to qemu as these CPUs are known. And due to that over time are missing in former releases. * To really benefit from the new features of these chips they have to be known, therefore new type additions done by upstream should be backported if they generally apply and do not depend on SRU-critical changes. * This backports two upstream fixes that just add definitions (no control flow changes) [Test Case] * Probe qemu for the known CPU types (wor
Re: [Kernel-packages] [Bug 1894627] Re: [nvidia] Web browser distorted after hibernation/power save when idle
Hi Daniel, I know this is off topic but I am having wifi throughput issues. all other devices that connected to my wireless are getting 150 - 200+ Mbps download speed. I have an HP OMEN gaming laptop that cannot get pass 80mbps to download speed. Can you help me out with how to report this? On Mon, Oct 26, 2020 at 7:15 PM Daniel van Vugt <1894...@bugs.launchpad.net> wrote: > You don't need to shut down. I already gave a workaround in comment #23: > > Close and reopen Chrome after resuming from suspend/hibernation. Then > use Ctrl+Shift+T to restore your previous tabs. > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1894627 > > Title: > [nvidia] Web browser distorted after hibernation/power save when idle > > Status in chromium-browser package in Ubuntu: > Triaged > Status in nvidia-graphics-drivers-340 package in Ubuntu: > Won't Fix > Status in nvidia-graphics-drivers-440 package in Ubuntu: > Won't Fix > > Bug description: > https://bugs.chromium.org/p/chromium/issues/detail?id=791913 > > --- > > my laptop goes to hibernation/power saver mode when my computer is idle. > every time I bring my computer back up, the screen distorted. I have to > close all my browsers. Sometimes, shut down the computer. > > Description: Ubuntu 20.04.1 LTS > Release: 20.04 > N: Unable to locate package pkgname > > ProblemType: Bug > DistroRelease: Ubuntu 20.04 > Package: xorg 1:7.7+19ubuntu14 > ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55 > Uname: Linux 5.4.0-45-generic x86_64 > NonfreeKernelModules: nvidia_modeset nvidia > .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Is a directory: > '/proc/driver/nvidia/gpus/:01:00.0' > .proc.driver.nvidia.registry: Binary: "" > .proc.driver.nvidia.suspend: suspend hibernate resume > .proc.driver.nvidia.suspend_depth: default modeset uvm > .proc.driver.nvidia.version: >NVRM version: NVIDIA UNIX x86_64 Kernel Module 440.100 Fri May 29 > 08:45:51 UTC 2020 >GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2) > ApportVersion: 2.20.11-0ubuntu27.8 > Architecture: amd64 > BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' > CasperMD5CheckResult: skip > CompositorRunning: None > CurrentDesktop: ubuntu:GNOME > Date: Mon Sep 7 03:33:23 2020 > DistUpgraded: Fresh install > DistroCodename: focal > DistroVariant: ubuntu > DkmsStatus: >nvidia, 440.100, 5.4.0-42-generic, x86_64: installed >nvidia, 440.100, 5.4.0-45-generic, x86_64: installed > ExtraDebuggingInterest: Yes > GraphicsCard: >Intel Corporation UHD Graphics 630 (Mobile) [8086:3e9b] (prog-if 00 > [VGA controller]) > Subsystem: Hewlett-Packard Company UHD Graphics 630 (Mobile) > [103c:8466] >NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] [10de:1c8c] (rev > a1) (prog-if 00 [VGA controller]) > Subsystem: Hewlett-Packard Company GP107M [GeForce GTX 1050 Ti > Mobile] [103c:8466] > InstallationDate: Installed on 2020-06-23 (75 days ago) > InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 > (20200423) > Lsusb: >Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >Bus 001 Device 002: ID 05c8:03ab Cheng Uei Precision Industry Co., Ltd > (Foxlink) HP Wide Vision HD Camera >Bus 001 Device 003: ID 8087:0aaa Intel Corp. >Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > MachineType: HP OMEN by HP Laptop > ProcEnviron: >TERM=xterm-256color >PATH=(custom, no user) >XDG_RUNTIME_DIR= >LANG=en_US.UTF-8 >SHELL=/bin/bash > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-45-generic > root=UUID=98265a4d-5439-415e-b43c-904265a8559a ro quiet splash vt.handoff=7 > SourcePackage: xorg > Symptom: display > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 04/24/2019 > dmi.bios.vendor: AMI > dmi.bios.version: F.09 > dmi.board.asset.tag: Base Board Asset Tag > dmi.board.name: 8466 > dmi.board.vendor: HP > dmi.board.version: 68.21 > dmi.chassis.type: 10 > dmi.chassis.vendor: HP > dmi.chassis.version: Chassis Version > dmi.modalias: > dmi:bvnAMI:bvrF.09:bd04/24/2019:svnHP:pnOMENbyHPLaptop:pvr:rvnHP:rn8466:rvr68.21:cvnHP:ct10:cvrChassisVersion: > dmi.product.family: 103C_5335KV HP OMEN > dmi.product.name: OMEN by HP Laptop > dmi.product.sku: 4CC49UA#ABA > dmi.sys.vendor: HP > modified.conffile..etc.default.apport: ># set this to 0 to disable apport, or to 1 to enable it ># you can temporarily override this with ># sudo service apport start force_start=1 >enabled=0 > mtime.conffile..etc.default.apport: 2020-06-26T00:47:21.524860 > version.compiz: compiz N/A > version.libdrm2: libdrm2 2.4.101-2 > version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.8-0ubuntu1~20.04.1 > version.libgl1-mesa-glx: libgl1-mesa-glx N/A > version.nvidia-graphics-drivers: nvidia-gr
[Kernel-packages] [Bug 1897751] Re: Introduce the new NVIDIA 455 series
This bug was fixed in the package linux-restricted-modules - 5.8.0-26.27 --- linux-restricted-modules (5.8.0-26.27) groovy; urgency=medium * Master version: 5.8.0-26.27 * Introduce the new NVIDIA 455 series (LP: #1897751) - [packaging] add signed modules for the nvidia 455 driver * Miscellaneous Ubuntu changes - debian/dkms-versions -- update from master -- Seth Forshee Wed, 21 Oct 2020 16:24:19 -0500 ** Changed in: linux-restricted-modules (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-restricted-modules in Ubuntu. https://bugs.launchpad.net/bugs/1897751 Title: Introduce the new NVIDIA 455 series Status in linux-restricted-modules package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-455 package in Ubuntu: Fix Released Bug description: [Impact] These releases provide both bug fixes and new features, and we would like to make sure all of our users have access to these improvements. See the changelog entry below for a full list of changes and bugs. [Test Case] The following development and SRU process was followed: https://wiki.ubuntu.com/NVidiaUpdates Certification test suite must pass on a range of hardware: https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu The QA team that executed the tests will be in charge of attaching the artifacts and console output of the appropriate run to the bug. nVidia maintainers team members will not mark ‘verification-done’ until this has happened. [Regression Potential] In order to mitigate the regression potential, the results of the aforementioned system level tests are attached to this bug. [Discussion] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules/+bug/1897751/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901755] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1901755 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901755 Title: "btrfs subvolume list" sporadically segfaults with linux- image-5.4.0-52-generic Status in linux package in Ubuntu: Incomplete Bug description: On a BTRFS volume with a lot of subvolumes, I get sporadic segfaults on "btrfs subvolume list", about 1/3 of the time. This is on Ubuntu 20.04. linux-image-5.4.0-48-generic does not experience those segfaults. On #btrfs on freenode, it was pointed out that 5.4.0-52.57 seems to have a regression but not the fix for it committed. To quote from the IRC message: > 5.4.0-52.57 has a regression (a48b73eca4ce btrfs: fix potential deadlock in the search ioctl) and not the fix (1c78544eaa46 btrfs: fix wrong address when faulting in pages in the search ioctl) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901755/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1830560] Re: suspend
I tried suspend and it still fails to recover in a reasonable time; usually it locks up and I have to do a hard start. I had thought that it was healed, but was mistaken. Bug still valid. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1830560 Title: suspend Status in linux package in Ubuntu: Invalid Bug description: This machine 16.04 fails to recover from suspend. Screen goes dark and no activity showing on HD Recovers OK after a hard restart with a bunch of "orphaned inodes" and functions properly. Seems to have occurred since an update. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-release-upgrader-core 1:16.04.26 ProcVersionSignature: Ubuntu 4.4.0-148.174-generic 4.4.177 Uname: Linux 4.4.0-148-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: Unity Date: Sun May 26 14:49:41 2019 InstallationDate: Installed on 2016-12-02 (905 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: dist-upgrade UpgradeStatus: No upgrade log present (probably fresh install) VarLogDistupgradeTermlog: --- ApportVersion: 2.20.1-0ubuntu2.25 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: david 2264 F pulseaudio /dev/snd/controlC1: david 2264 F pulseaudio /dev/snd/controlC2: david 2264 F pulseaudio /dev/snd/controlC0: david 2264 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=6d9c0c07-720c-44a7-8c67-346b7a6b9755 InstallationDate: Installed on 2016-12-02 (1406 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 10117 Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-190-generic root=UUID=073e377f-0d1b-496e-8464-3d1b70ce67ba ro quiet splash ProcVersionSignature: Ubuntu 4.4.0-190.220-generic 4.4.233 RelatedPackageVersions: linux-restricted-modules-4.4.0-190-generic N/A linux-backports-modules-4.4.0-190-generic N/A linux-firmware 1.157.23 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: xenial Uname: Linux 4.4.0-190-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo tty uucp uuidd _MarkForUpload: True dmi.bios.date: 11/05/2013 dmi.bios.vendor: LENOVO dmi.bios.version: I7KT31AUS dmi.board.vendor: LENOVO dmi.board.version: 31900058 STD dmi.chassis.type: 3 dmi.chassis.vendor: LENOVO dmi.modalias: dmi:bvnLENOVO:bvrI7KT31AUS:bd11/05/2013:svnLENOVO:pn10117:pvrLenovoH535:rvnLENOVO:rn:rvr31900058STD:cvnLENOVO:ct3:cvr: dmi.product.name: 10117 dmi.product.version: Lenovo H535 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1830560/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1830560] Re: suspend
Closing as per comment #18. ** Changed in: linux (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1830560 Title: suspend Status in linux package in Ubuntu: Invalid Bug description: This machine 16.04 fails to recover from suspend. Screen goes dark and no activity showing on HD Recovers OK after a hard restart with a bunch of "orphaned inodes" and functions properly. Seems to have occurred since an update. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-release-upgrader-core 1:16.04.26 ProcVersionSignature: Ubuntu 4.4.0-148.174-generic 4.4.177 Uname: Linux 4.4.0-148-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: Unity Date: Sun May 26 14:49:41 2019 InstallationDate: Installed on 2016-12-02 (905 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: dist-upgrade UpgradeStatus: No upgrade log present (probably fresh install) VarLogDistupgradeTermlog: --- ApportVersion: 2.20.1-0ubuntu2.25 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: david 2264 F pulseaudio /dev/snd/controlC1: david 2264 F pulseaudio /dev/snd/controlC2: david 2264 F pulseaudio /dev/snd/controlC0: david 2264 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=6d9c0c07-720c-44a7-8c67-346b7a6b9755 InstallationDate: Installed on 2016-12-02 (1406 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: LENOVO 10117 Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-190-generic root=UUID=073e377f-0d1b-496e-8464-3d1b70ce67ba ro quiet splash ProcVersionSignature: Ubuntu 4.4.0-190.220-generic 4.4.233 RelatedPackageVersions: linux-restricted-modules-4.4.0-190-generic N/A linux-backports-modules-4.4.0-190-generic N/A linux-firmware 1.157.23 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: xenial Uname: Linux 4.4.0-190-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo tty uucp uuidd _MarkForUpload: True dmi.bios.date: 11/05/2013 dmi.bios.vendor: LENOVO dmi.bios.version: I7KT31AUS dmi.board.vendor: LENOVO dmi.board.version: 31900058 STD dmi.chassis.type: 3 dmi.chassis.vendor: LENOVO dmi.modalias: dmi:bvnLENOVO:bvrI7KT31AUS:bd11/05/2013:svnLENOVO:pn10117:pvrLenovoH535:rvnLENOVO:rn:rvr31900058STD:cvnLENOVO:ct3:cvr: dmi.product.name: 10117 dmi.product.version: Lenovo H535 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1830560/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901755] Re: "btrfs subvolume list" sporadically segfaults with linux-image-5.4.0-52-generic
** Package changed: ubuntu => linux (Ubuntu) ** Tags added: focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901755 Title: "btrfs subvolume list" sporadically segfaults with linux- image-5.4.0-52-generic Status in linux package in Ubuntu: New Bug description: On a BTRFS volume with a lot of subvolumes, I get sporadic segfaults on "btrfs subvolume list", about 1/3 of the time. This is on Ubuntu 20.04. linux-image-5.4.0-48-generic does not experience those segfaults. On #btrfs on freenode, it was pointed out that 5.4.0-52.57 seems to have a regression but not the fix for it committed. To quote from the IRC message: > 5.4.0-52.57 has a regression (a48b73eca4ce btrfs: fix potential deadlock in the search ioctl) and not the fix (1c78544eaa46 btrfs: fix wrong address when faulting in pages in the search ioctl) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901755/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901755] [NEW] "btrfs subvolume list" sporadically segfaults with linux-image-5.4.0-52-generic
You have been subscribed to a public bug: On a BTRFS volume with a lot of subvolumes, I get sporadic segfaults on "btrfs subvolume list", about 1/3 of the time. This is on Ubuntu 20.04. linux-image-5.4.0-48-generic does not experience those segfaults. On #btrfs on freenode, it was pointed out that 5.4.0-52.57 seems to have a regression but not the fix for it committed. To quote from the IRC message: > 5.4.0-52.57 has a regression (a48b73eca4ce btrfs: fix potential deadlock in the search ioctl) and not the fix (1c78544eaa46 btrfs: fix wrong address when faulting in pages in the search ioctl) ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- "btrfs subvolume list" sporadically segfaults with linux-image-5.4.0-52-generic https://bugs.launchpad.net/bugs/1901755 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
The standalone patch #217 is working for MSFT0001:00 04F3:3140 but isn't working perfectly for MSFT0001:00 06CB:7F28. The MSFT0001:00 06CB:7F28 touchpad frequently locks into scroll mode when using multitouch gestures. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 Status in Pop!_OS: New Status in linux package in Ubuntu: Confirmed Status in xserver-xorg-input-libinput package in Ubuntu: Confirmed Status in linux package in Arch Linux: Fix Committed Status in linux package in Fedora: Confirmed Status in linux package in openSUSE: New Bug description: Hello The MSFT touchpad of this Lenovo Legion-5 15ARH05 laptop is not reacting at all (pointer and click never move when touchpad is touched). This has been reported by other users in various websites, with various linux systems including other Ubuntu systems, but I saw no launchpad bug so I post one. Example of websites covering the issue : - https://askubuntu.com/questions/1253830/lenovo-legion-5-touchpad (exactly the same laptop) - https://www.linux.org/threads/lenovo-legion-5-touchpad.29536/ (similar laptop) xinput indentifies it as MSFT0001:00 04F3:3140 Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ MSFT0001:00 04F3:3140 Touchpad id=17 [slave pointer (2)] ⎜ ↳ MSFT0001:00 04F3:3140 Mouse id=16 [slave pointer (2)] ⎜ ↳ ITE Tech. Inc. ITE Device(8910) Consumer Controlid=12 [slave pointer (2)] ⎜ ↳ Logitech USB Optical Mouse id=11 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Ideapad extra buttons id=15 [slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Consumer Controlid=19 [slave keyboard (3)] ↳ Power Buttonid=9[slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Wireless Radio Control id=13 [slave keyboard (3)] ↳ ITE Tech. Inc. ITE Device(8910) Keyboardid=14 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=18 [slave keyboard (3)] ↳ Video Bus id=8[slave keyboard (3)] Thanks a lot for your time. It does not help, but I can confirm what was reported on askubuntu by another user : the touchpad does work on Windows. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-40-generic 5.4.0-40.44 ProcVersionSignature: Ubuntu 5.4.0-40.44-generic 5.4.44 Uname: Linux 5.4.0-40-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicolas1567 F pulseaudio /dev/snd/controlC1: nicolas1567 F pulseaudio /dev/snd/controlC2: nicolas1567 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Jul 10 20:14:25 2020 InstallationDate: Installed on 2020-07-02 (8 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: LENOVO 82B5 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-40-generic root=UUID=d8898017-2821-434e-ab52-fec76ac93106 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-40-generic N/A linux-backports-modules-5.4.0-40-generic N/A linux-firmware1.187.1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/12/2020 dmi.bios.vendor: LENOVO dmi.bios.version: EUCN19WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Legion 5 15ARH05 dmi.modalias: dmi:bvnLENOVO:bvrEUCN19WW:bd05/12/2020:svnLENOVO:pn82B5:pvrLenovoLegion515ARH05:rvnLENOVO:rnLNVNB161216:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrLenovoLegion515ARH05: dmi.product.family: Legion 5 15ARH05 dmi.product.name: 82B5 dmi.product.s
[Kernel-packages] [Bug 1894896] Re: [linux-azure][hibernation] Mellanox CX4 NIC's TX/RX packets stop increasing after hibernation/resume
** Changed in: linux-azure (Ubuntu Focal) Assignee: (unassigned) => Marcelo Cerri (mhcerri) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1894896 Title: [linux-azure][hibernation] Mellanox CX4 NIC's TX/RX packets stop increasing after hibernation/resume Status in linux-azure package in Ubuntu: New Status in linux-azure source package in Focal: In Progress Bug description: [Impact] Description of problem: In a VM with CX4 VF NIC on Azure, after hibernation/resume, the TX/RX packet counters stop increaseing. This issue doesn't exist in VM with a CX3 VF NIC. This happens to the latest stable release of the linux-azure 5.4.0-1023.23 kernel and the latest mainline linux kernel. [Test Case] How reproducible: 100% Steps to Reproduce: 1. Start a VM in Azure that supports Accelerated Networking, and enable hibernation properly (please refer to https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1880032/comments/14 ). Please make sure the VF NIC is CX-4 since the issue doesn't happen to CX-3. 2. Do hibernation from serial console # systemctl hibernate 3. After the VM resumes back, check the MSI interrupt counters in /proc/interrupts for the CX-4 NIC, and also check “ifconfig” (e.g. “ifconfig enP2642s2”) for the RX/TX counters. These counters stop increasing while they should. [Regression Potential] The change touches netvsc and has potential to affect any instances using accelerated networking. However the fix is straightforward and it's a clean cherry-pick from 5.9. [Other Info] BUG FIX: The fix is in the net.git tree now: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=19162fd4063a3211843b997a454b505edb81d5ce To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1894896/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1848921] Re: iwlwifi firmware crashes intel 9260ac [8086:2526] subsystem [8086:0010]
I can feel your desperation. I gave up, and replaced my 9260 with an ax200. Problem gone. Cost $15 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1848921 Title: iwlwifi firmware crashes intel 9260ac [8086:2526] subsystem [8086:0010] Status in linux package in Ubuntu: Confirmed Bug description: Ubuntu 19.10 Kernel 5.3.0-18-generic Hardware: Thinkpad T460p (also tested on T480s) with Intel 9260ac wifi card. Expected: Wifi connects, uploads/downloads as normal Symptom: Wifi connects, as soon as an upload/download (any heavy traffic) start, the system comes to a crawl, becomes barely usable, and I end up opening a prompt to reboot. The system is unusable. This happens even with the Live USB version. The only solution I found was to download a different (newer) firmware. Latest version from: https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi This is iwlwifi-9260-th-b0-jf-b0-34.618819.0.tgz I then manually copy the contained firmware to /lib/firmware, remove all other versions and make a link to iwlwifi-9260-th-b0-jf-46.ucode that the kernel expects to load. This completely resolves the issue. This is the carsh log (Thinkpad T460p, but identical to T480s, all fresh installs): Oct 20 01:51:13 weywot kernel: iwlwifi :03:00.0: Error sending SCAN_CFG_CMD: time out after 2000ms. Oct 20 01:51:13 weywot kernel: iwlwifi :03:00.0: Current CMD queue read_ptr 64 write_ptr 65 Oct 20 01:51:13 weywot kernel: iwlwifi :03:00.0: HW error, resetting before reading Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: Start IWL Error Log Dump: Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: Status: 0x0080, count: 609870115 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: Loaded firmware version: 46.6bf1df06.0 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x36BC8FCF | ADVANCED_SYSASSERT Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x28A5819E | trm_hw_status0 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x77944CFA | trm_hw_status1 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x018004F5 | branchlink2 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xEBCFC5F1 | interruptlink1 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x07206003 | interruptlink2 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xE956CDF4 | data1 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x7D692903 | data2 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xAD22F469 | data3 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x1040C00E | beacon time Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x0FF6877F | tsf low Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x82686A2F | tsf hi Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xB715D7B2 | time gp1 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x5EC31049 | time gp2 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xF7FD7FF6 | uCode revision type Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x31225172 | uCode version major Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xFD1DB8B4 | uCode version minor Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xC000F415 | hw version Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x7F9AFDD4 | board version Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xD5FD2F0F | hcmd Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x8F81D049 | isr0 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xEDDFDA7B | isr1 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xD9409AD7 | isr2 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x5AF7DA77 | isr3 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x400240BE | isr4 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xEEF6DF6B | last cmd Id Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x40528540 | wait_event Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xB9BBD6FD | l2p_control Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xC21B6142 | l2p_duration Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x7BDF6F9E | l2p_mhvalid Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x190AF41B | l2p_addr_match Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x7FF297FF | lmpm_pmg_sel Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x5248C715 | timestamp Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0xBBB939AF | flow_handler Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: Start IWL Error Log Dump: Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: Status: 0x0080, count: -4391457 Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x5350C91F | ADVANCED_SYSASSERT Oct 20 01:51:16 weywot kernel: iwlwifi :03:00.0: 0x1FFE5437 | u
[Kernel-packages] [Bug 1872001] Re: 5.3.0-46-generic - i915 - frequent GPU hangs / resets rcs0
Same story here on Ubuntu 20.10. Kernel version 5.8.0-25-generic on Dell XPS 15 9570, with Intel UHD Graphics 630 (Mobile). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1872001 Title: 5.3.0-46-generic - i915 - frequent GPU hangs / resets rcs0 Status in linux package in Ubuntu: Confirmed Status in linux source package in Eoan: Fix Released Bug description: Hi, Since update to HWE kernel 5.3.0-46-generic I am experiencing frequent (every couple of minutes) GPU hangs and reset manifesting as 2-3 seconds freezes of the GUI (other than the mouse pointer). No particular triggers identified although have Chrome / Chromium running with Hardware Acceleration enabled does appear to increase the frequency. I have seen incidences of these hangs in jounralctl output using previous kernels in the 5.3.0-xx series but they were very infrequent (one or twice in a week of daily usage) System Info steve@steve-Inspiron-5580:~$ inxi -SCGxxxz System:Host: steve-Inspiron-5580 Kernel: 5.3.0-46-generic x86_64 bits: 64 compiler: gcc v: 7.5.0 Desktop: Cinnamon 4.4.8 wm: muffin 4.4.2 dm: LightDM 1.26.0 Distro: Linux Mint 19.3 Tricia base: Ubuntu 18.04 bionic CPU: Topology: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP arch: Kaby Lake rev: B L2 cache: 6144 KiB flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800 Speed: 1173 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800 8: 800 Graphics: Device-1: Intel vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:3ea0 Display: x11 server: X.Org 1.20.5 driver: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz OpenGL: renderer: Mesa DRI Intel UHD Graphics (Whiskey Lake 3x8 GT2) v: 4.5 Mesa 19.2.8 compat-v: 3.0 direct render: Yes steve@steve-Inspiron-5580:~$ journalctl -b | grep i915 Apr 10 06:15:17 steve-Inspiron-5580 kernel: i915 :00:02.0: vgaarb: deactivate vga console Apr 10 06:15:17 steve-Inspiron-5580 kernel: i915 :00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem Apr 10 06:15:17 steve-Inspiron-5580 kernel: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) Apr 10 06:15:17 steve-Inspiron-5580 kernel: [drm] Initialized i915 1.6.0 20190619 for :00:02.0 on minor 0 Apr 10 06:15:17 steve-Inspiron-5580 kernel: fbcon: i915drmfb (fb0) is primary device Apr 10 06:15:17 steve-Inspiron-5580 kernel: i915 :00:02.0: fb0: i915drmfb frame buffer device Apr 10 06:15:17 steve-Inspiron-5580 kernel: snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) Apr 10 06:16:28 steve-Inspiron-5580 kernel: i915 :00:02.0: GPU HANG: ecode 9:0:0x, hang on rcs0 Apr 10 06:16:28 steve-Inspiron-5580 kernel: i915 :00:02.0: Resetting rcs0 for hang on rcs0 Apr 10 06:31:46 steve-Inspiron-5580 kernel: i915 :00:02.0: Resetting rcs0 for hang on rcs0 Apr 10 06:37:48 steve-Inspiron-5580 kernel: i915 :00:02.0: Resetting rcs0 for hang on rcs0 Apr 10 06:40:46 steve-Inspiron-5580 kernel: i915 :00:02.0: Resetting rcs0 for hang on rcs0 I note another user has reported similar issues on the same kernel at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1861395/comments/52 --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.14 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: steve 3920 F pulseaudio /dev/snd/pcmC0D0p: steve 3920 F...m pulseaudio CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 19.3 HibernationDevice: RESUME=none InstallationDate: Installed on 2019-12-27 (104 days ago) InstallationMedia: Linux Mint 19.3 "Tricia" - Release amd64 20191213 MachineType: Dell Inc. Inspiron 5580 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=b0eaa5bb-0276-42d4-938f-ee6ce1627906 ro usb_storage.quirks=0bc2:2320: quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-46.38~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-46-generic N/A linux-backports-modules-5.3.0-46-generic N/A linux-firmware1.173.17 Tags: tricia Uname: Linux 5.3.0-46-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip input lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 07/02/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 2.4.0 dmi.board.name: 0K0DFT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.
[Kernel-packages] [Bug 1894896] Re: [linux-azure][hibernation] Mellanox CX4 NIC's TX/RX packets stop increasing after hibernation/resume
groovy:linux-azure already has the fix that was included by the upstream stable update LP:#1897550. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1894896 Title: [linux-azure][hibernation] Mellanox CX4 NIC's TX/RX packets stop increasing after hibernation/resume Status in linux-azure package in Ubuntu: New Status in linux-azure source package in Focal: In Progress Bug description: [Impact] Description of problem: In a VM with CX4 VF NIC on Azure, after hibernation/resume, the TX/RX packet counters stop increaseing. This issue doesn't exist in VM with a CX3 VF NIC. This happens to the latest stable release of the linux-azure 5.4.0-1023.23 kernel and the latest mainline linux kernel. [Test Case] How reproducible: 100% Steps to Reproduce: 1. Start a VM in Azure that supports Accelerated Networking, and enable hibernation properly (please refer to https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1880032/comments/14 ). Please make sure the VF NIC is CX-4 since the issue doesn't happen to CX-3. 2. Do hibernation from serial console # systemctl hibernate 3. After the VM resumes back, check the MSI interrupt counters in /proc/interrupts for the CX-4 NIC, and also check “ifconfig” (e.g. “ifconfig enP2642s2”) for the RX/TX counters. These counters stop increasing while they should. [Regression Potential] The change touches netvsc and has potential to affect any instances using accelerated networking. However the fix is straightforward and it's a clean cherry-pick from 5.9. [Other Info] BUG FIX: The fix is in the net.git tree now: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=19162fd4063a3211843b997a454b505edb81d5ce To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1894896/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1894896] Re: [linux-azure][hibernation] Mellanox CX4 NIC's TX/RX packets stop increasing after hibernation/resume
SRU submission: https://lists.ubuntu.com/archives/kernel- team/2020-October/114296.html ** Description changed: + [Impact] + Description of problem: In a VM with CX4 VF NIC on Azure, after hibernation/resume, the TX/RX packet counters stop increaseing. This issue doesn't exist in VM with a CX3 VF NIC. This happens to the latest stable release of the linux-azure 5.4.0-1023.23 kernel and the latest mainline linux kernel. + + [Test Case] How reproducible: 100% Steps to Reproduce: 1. Start a VM in Azure that supports Accelerated Networking, and enable hibernation properly (please refer to https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1880032/comments/14 ). Please make sure the VF NIC is CX-4 since the issue doesn't happen to CX-3. 2. Do hibernation from serial console # systemctl hibernate 3. After the VM resumes back, check the MSI interrupt counters in /proc/interrupts for the CX-4 NIC, and also check “ifconfig” (e.g. “ifconfig enP2642s2”) for the RX/TX counters. These counters stop increasing while they should. + [Regression Potential] + + The change touches netvsc and has potential to affect any instances + using accelerated networking. However the fix is straightforward and + it's a clean cherry-pick from 5.9. + + [Other Info] BUG FIX: - The fix is in the net.git tree now: + The fix is in the net.git tree now: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=19162fd4063a3211843b997a454b505edb81d5ce ** Also affects: linux-azure (Ubuntu Focal) Importance: Undecided Status: New ** Changed in: linux-azure (Ubuntu Focal) Status: New => In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-azure in Ubuntu. https://bugs.launchpad.net/bugs/1894896 Title: [linux-azure][hibernation] Mellanox CX4 NIC's TX/RX packets stop increasing after hibernation/resume Status in linux-azure package in Ubuntu: New Status in linux-azure source package in Focal: In Progress Bug description: [Impact] Description of problem: In a VM with CX4 VF NIC on Azure, after hibernation/resume, the TX/RX packet counters stop increaseing. This issue doesn't exist in VM with a CX3 VF NIC. This happens to the latest stable release of the linux-azure 5.4.0-1023.23 kernel and the latest mainline linux kernel. [Test Case] How reproducible: 100% Steps to Reproduce: 1. Start a VM in Azure that supports Accelerated Networking, and enable hibernation properly (please refer to https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1880032/comments/14 ). Please make sure the VF NIC is CX-4 since the issue doesn't happen to CX-3. 2. Do hibernation from serial console # systemctl hibernate 3. After the VM resumes back, check the MSI interrupt counters in /proc/interrupts for the CX-4 NIC, and also check “ifconfig” (e.g. “ifconfig enP2642s2”) for the RX/TX counters. These counters stop increasing while they should. [Regression Potential] The change touches netvsc and has potential to affect any instances using accelerated networking. However the fix is straightforward and it's a clean cherry-pick from 5.9. [Other Info] BUG FIX: The fix is in the net.git tree now: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=19162fd4063a3211843b997a454b505edb81d5ce To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1894896/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Re: Sound Blaster Audigy 5/Rx cannot be configured as input/output
@Daniel van Vugt: thanks for checking my bug request. I apologise for the missing information: I've just executed the apport-collect and I wish all the necessary information to be attached. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427982/+files/acpidump.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427974/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427981/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427980/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427973/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427979/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427978/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427975/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427977/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427976/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427971/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427972/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427969/+files/Dependencies.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427968/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427970/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1901413] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1901413/+attachment/5427967/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901413 Title: Sound Blaster Audigy 5/Rx cannot be configured as input/output Status in linux package in Ubuntu: Incomplete Status in pulseaudio package in Ubuntu: Incomplete Bug description: I have Sound Blaster Audigy 5/Rx, using the well known snd_emu10k1, but I cannot use it as both input and output device: it's working either as output or as input but not as input/output. I have installed "pavucontrol", when opening it in "configure" there are different options: Output "Analog Stereo" Output "Digital Stereo (IEC958)" Output "Surround 5.1" Output "Surround 4.1" Output "Surround 2.1" Output "Surround 7.1" Output "Surround 5.0" Output "Surround 4.0" Input "Analog Stereo" Input "Digital Stereo (IEC958)" If I pick one of the "output" I can hear the sound but the microphones are greyed out in the audio panel and I can't use it in any application. Instead if I select "Input "Analog Stereo"" I can record the audio but I can't hear any output! The volumes are turned up according also to a previous post I did related to similar issue I had in the past. The only workaround found so far is to execute: "pacmd load-module module-alsa-source device=hw:1,0". Please find attached "alsa-info" report. Everything was working fine in Min 19.3 but not in Mint 20 (based on Ubuntu 20.04): DISTRIB_ID=LinuxMint DISTRIB_RELEASE=20 DISTRIB_CODENAME=ulyana DISTRIB_DESCRIPTION="Linux Mint 20 Ulyana" snd_emu10k1 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ale1149 F pulseaudio /dev/snd/controlC1: ale1149 F pulseaudio /dev/snd/pcmC1D0p: ale1149 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: X-Cinnamon DistroRelease: Linux Mint 20 InstallationDate: Installed on 2020-08-29 (59 days ago) InstallationMedia: Linux Mint 20 "Ulyana" - Release amd64 20200624 IwConfig: enp3s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. NonfreeKernelModules: nvidia_modeset nvidia Package: pulseaudio 1:13.99.1-1ubuntu3.7 [origin: Ubuntu] PackageArchitecture: amd64 ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-52-generic root=UUID=115b8bd7-9195-4e50-b759-835b1a63a5e7 ro quiet splash ProcVersionSignature: Ubuntu 5.4.0-52.57-generic 5.4.65 RelatedPackageVersions: linux-restricted-modules-5.4.0-52-generic N/A linux-backports-modules-5.4.0-52-generic N/A linux-firmware1.187.3 RfKill: Tags: ulyana third-party-packages Uname: Linux 5.4.0-52-generic x86_64 UnreportableReason: Questo non è un pacchetto ufficiale di Linux. Rimuovere tutti i pacchetti di terze parti, quindi riprovare. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 03/06/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.80 dmi.board.name: Z97 Extreme6 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.80:bd03/06/2018:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ97Extreme6:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2020-10-25T14:57:41.721069 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp