[Kernel-packages] [Bug 2003995] [NEW] Update the 525 UDA NVIDIA driver series in Bionic, Focal, Jammy, and Kinetic
Public bug reported: [Impact] These releases provide both bug fixes and new features, and we would like to make sure all of our users have access to these improvements. See the changelog entry below for a full list of changes and bugs. [Test Case] The following development and SRU process was followed: https://wiki.ubuntu.com/NVidiaUpdates Certification test suite must pass on a range of hardware: https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu The QA team that executed the tests will be in charge of attaching the artifacts and console output of the appropriate run to the bug. nVidia maintainers team members will not mark ‘verification-done’ until this has happened. [Regression Potential] In order to mitigate the regression potential, the results of the aforementioned system level tests are attached to this bug. [Discussion] [Changelog] 525.85.05 Improved the reliability of suspend and resume on UEFI systems when using certain display panels. Fixed a bug that prevented some controls in the nvidia-settings control panel from working when running an X server as an unprivileged user. Fixed a bug that could cause VK_ERROR_DEVICE_LOST when using VK_MEMORY_ALLOCATE_DEVICE_ADDRESS_CAPTURE_REPLAY_BIT to allocate memory. Disabled Fixed Rate Link (FRL) when using passive DisplayPort to HDMI dongles, which are incompatible with FRL. ** Affects: nvidia-graphics-drivers-525 (Ubuntu) Importance: High Assignee: Alberto Milone (albertomilone) Status: Triaged ** Affects: nvidia-graphics-drivers-525 (Ubuntu Bionic) Importance: High Assignee: Alberto Milone (albertomilone) Status: Triaged ** Affects: nvidia-graphics-drivers-525 (Ubuntu Focal) Importance: High Assignee: Alberto Milone (albertomilone) Status: Triaged ** Affects: nvidia-graphics-drivers-525 (Ubuntu Jammy) Importance: High Assignee: Alberto Milone (albertomilone) Status: Triaged ** Affects: nvidia-graphics-drivers-525 (Ubuntu Kinetic) Importance: High Assignee: Alberto Milone (albertomilone) Status: Triaged ** Also affects: nvidia-graphics-drivers-525 (Ubuntu Kinetic) Importance: Undecided Status: New ** Also affects: nvidia-graphics-drivers-525 (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: nvidia-graphics-drivers-525 (Ubuntu Focal) Importance: Undecided Status: New ** Also affects: nvidia-graphics-drivers-525 (Ubuntu Jammy) Importance: Undecided Status: New ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Bionic) Assignee: (unassigned) => Alberto Milone (albertomilone) ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Focal) Assignee: (unassigned) => Alberto Milone (albertomilone) ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Jammy) Assignee: (unassigned) => Alberto Milone (albertomilone) ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Kinetic) Assignee: (unassigned) => Alberto Milone (albertomilone) ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Bionic) Status: New => Triaged ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Focal) Status: New => Triaged ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Jammy) Status: New => Triaged ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Kinetic) Status: New => Triaged ** Changed in: nvidia-graphics-drivers-525 (Ubuntu) Importance: Undecided => High ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Bionic) Importance: Undecided => High ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Focal) Importance: Undecided => High ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Jammy) Importance: Undecided => High ** Changed in: nvidia-graphics-drivers-525 (Ubuntu Kinetic) Importance: Undecided => High ** Description changed: [Impact] These releases provide both bug fixes and new features, and we would like to make sure all of our users have access to these improvements. See the changelog entry below for a full list of changes and bugs. [Test Case] The following development and SRU process was followed: https://wiki.ubuntu.com/NVidiaUpdates Certification test suite must pass on a range of hardware: https://git.launchpad.net/plainbox-provider-sru/tree/units/sru.pxu The QA team that executed the tests will be in charge of attaching the artifacts and console output of the appropriate run to the bug. nVidia maintainers team members will not mark ‘verification-done’ until this has happened. [Regression Potential] In order to mitigate the regression potential, the results of the aforementioned system level tests are attached to this bug. [Discussion] [Changelog] + + 525.85.05 + + Improved the reliability of suspend and resume on UEFI systems when using certain display panels. + Fixed a bug that prevented some controls in the nvidia-settings control panel from working when runnin
[Kernel-packages] [Bug 1995886] Re: vmxnet3: update to latest ToT
Hello Tim, What is the status of these patches? Have they been merged to any release? Thanks, Ronak -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1995886 Title: vmxnet3: update to latest ToT Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: New Status in linux source package in Kinetic: New Bug description: This request is to port vmxnet3 patches to Ubuntu kernel. Below are the commits in order: vmxnet3: prepare for version 7 changes https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=55f0395fcace9e675af2cbb96015ce1ae8856806 vmxnet3: add support for capability registers https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=6f91f4ba046e5de6a6e579620b32b8ecf56873f7 vmxnet3: add support for large passthrough BAR register https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=543fb67405410cc548a72d7a9a4087688d2f56ac vmxnet3: add support for out of order rx completion https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=2c5a5748105a6bb901579d365c6f93e79f282b69 vmxnet3: add command to set ring buffer sizes https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=c7112ebd27ea0dbe4eecd5c96cad93757e34e73d vmxnet3: limit number of TXDs used for TSO packet https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=d2857b99a74b082368ee80f359372faa1d051043 vmxnet3: use ext1 field to indicate encapsulated packet https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=60cafa0395c2bed44d13277ed328317ed16a58c0 vmxnet3: update to version 7 https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=acc38e041bd304621d4f59cea4849747d13bba9c vmxnet3: disable overlay offloads if UPT device does not support https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net- next.git/commit/drivers/net/vmxnet3?id=a56b158a5078b8120d3d72fc9fd44efed5123b12 vmxnet3: do not reschedule napi for rx processing https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/drivers/net/vmxnet3?id=5b91884bf50b21d34bd3daa5c8f8b7e92e0a2c46 This is a request to bring latest Ubuntu LTS releases' vmxnet3 driver up to date with ToT Linux kernel. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1995886/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1969959] Re: [nouveau] Weird colors after startup (Ubuntu 22.04)
> non-nVidia hardware The above is a Dell Latitude 3160 Pentium-powered Chromebook-class educational laptop. Built-in screen. Problem occurs when booting from USB stick and choosing 'Try Ubuntu' (or 'Try Ubuntu Budgie'), with 22.04.1-LTS (Jammy). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1969959 Title: [nouveau] Weird colors after startup (Ubuntu 22.04) Status in linux package in Ubuntu: Confirmed Status in mesa package in Ubuntu: Confirmed Bug description: [Workaround/Fix] 1. When starting the Ubuntu live image, select the option 'Ubuntu (safe graphics)' from the boot menu. 2. During installation be sure to select the third-party software option checkbox in order to get the right Nvidia driver installed. [Original Description] I started Ubuntu 22.04 from a live pen drive. Everything seems fine, the usual screen with the options to "Try Ubuntu" or "Install" Ubuntu appears. When hitting "Try Ubuntu", the screen turns black for a couple of seconds and then re-appears in yellow and brown colors, feels like a 4 color display (white, black, yellow and orange) and I can hardly see anything - sending this bug report from that live system right after starting it up. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-25.25-generic 5.15.30 Uname: Linux 5.15.0-25-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CasperVersion: 1.470 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Apr 22 15:54:05 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation TU117 [GeForce GTX 1650] [10de:1f82] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation TU117 [GeForce GTX 1650] [10de:1f82] Advanced Micro Devices, Inc. [AMD/ATI] Renoir [1002:1636] (rev d9) (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Renoir [1002:1636] LiveMediaBuild: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: Micro-Star International Co., Ltd. MS-7C56 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed maybe-ubiquity quiet splash --- SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/30/2020 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A.40 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: B550-A PRO (MS-7C56) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA.40:bd10/30/2020:br5.17:svnMicro-StarInternationalCo.,Ltd.:pnMS-7C56:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnB550-APRO(MS-7C56):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0:skuTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7C56 dmi.product.sku: To be filled by O.E.M. dmi.product.version: 1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.110-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.0.1-1ubuntu2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2build3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1969959/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1993718] Re: Promote to restricted: broadcom-sta & bcmwl are duplicates
** Summary changed: - broadcom-sta & bcmwl are duplicates + Promote to restricted: broadcom-sta & bcmwl are duplicates ** Changed in: broadcom-sta (Ubuntu) Status: New => Triaged ** Description changed: + Ubuntu archive please promote broadcom-sta from multiverse to + restricted. + + After that's done and migrates, we will be able to remove bcmwl from the + archive. + + --- + broadcom-sta & bcmwl are duplicates of each other. One is packaged and maintained by archlinux/debian the other one was our self packaged one. We should merge the two. On the surface the source code is the same, there is slightly better dkms packaging on the broadcom-sta package. However it is missing modaliases stanzas. I think we should port the modaliases to the new package, and remove the old one. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1993718 Title: Promote to restricted: broadcom-sta & bcmwl are duplicates Status in bcmwl package in Ubuntu: New Status in broadcom-sta package in Ubuntu: Triaged Bug description: Ubuntu archive please promote broadcom-sta from multiverse to restricted. After that's done and migrates, we will be able to remove bcmwl from the archive. --- broadcom-sta & bcmwl are duplicates of each other. One is packaged and maintained by archlinux/debian the other one was our self packaged one. We should merge the two. On the surface the source code is the same, there is slightly better dkms packaging on the broadcom-sta package. However it is missing modaliases stanzas. I think we should port the modaliases to the new package, and remove the old one. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1993718/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1969959] Re: [nouveau] Weird colors after startup (Ubuntu 22.04)
> We aren't considering the issue as rls target at this point, it's on a limited set of hardware and the nvidia drivers don't have the issue and can we used instead This behavior is also occurring on non-nVidia hardware: $ dmesg |egrep '(CPU|fb|i915)' |grep -v '0x[0-9a-f]*fb[0-9a-f]*' [0.057997] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [0.058224] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [0.175649] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [0.218117] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [0.239261] CPU0: Thermal monitoring enabled (TM1) [0.239261] MDS: Mitigation: Clear CPU buffers [0.239261] smpboot: CPU0: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3) [0.239261] smp: Bringing up secondary CPUs ... [0.239261] node #0, CPUs: #1 #2 #3 [0.247844] smp: Brought up 1 node, 4 CPUs [0.413818] pci :00:02.0: BAR 2: assigned to efifb [0.795846] fbcon: Taking over console [0.989716] ledtrig-cpu: registered to indicate activity on CPUs [0.989957] efifb: probing for efifb [0.990013] efifb: showing boot graphics [0.992809] efifb: framebuffer at 0x8000, using 4128k, total 4128k [0.992823] efifb: mode is 1366x768x32, linelength=5504, pages=1 [0.992826] efifb: scrolling: redraw [0.992827] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [0.998870] fb0: EFI VGA frame buffer device [2.931834] i915 :00:02.0: vgaarb: deactivate vga console [3.002852] [drm] Initialized i915 1.6.0 20201103 for :00:02.0 on minor 0 [3.104714] fbcon: i915drmfb (fb0) is primary device [4.548010] i915 :00:02.0: [drm] fb0: i915drmfb frame buffer device [ 20.618832] snd_hda_intel :00:1b.0: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) $ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1969959 Title: [nouveau] Weird colors after startup (Ubuntu 22.04) Status in linux package in Ubuntu: Confirmed Status in mesa package in Ubuntu: Confirmed Bug description: [Workaround/Fix] 1. When starting the Ubuntu live image, select the option 'Ubuntu (safe graphics)' from the boot menu. 2. During installation be sure to select the third-party software option checkbox in order to get the right Nvidia driver installed. [Original Description] I started Ubuntu 22.04 from a live pen drive. Everything seems fine, the usual screen with the options to "Try Ubuntu" or "Install" Ubuntu appears. When hitting "Try Ubuntu", the screen turns black for a couple of seconds and then re-appears in yellow and brown colors, feels like a 4 color display (white, black, yellow and orange) and I can hardly see anything - sending this bug report from that live system right after starting it up. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-25.25-generic 5.15.30 Uname: Linux 5.15.0-25-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: pass CasperVersion: 1.470 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Apr 22 15:54:05 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation TU117 [GeForce GTX 1650] [10de:1f82] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation TU117 [GeForce GTX 1650] [10de:1f82] Advanced Micro Devices, Inc. [AMD/ATI] Renoir [1002:1636] (rev d9) (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Renoir [1002:1636] LiveMediaBuild: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: Micro-Star International Co., Ltd. MS-7C56 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed maybe-ubiquity quiet splash --- SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/30/2020 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: A.40 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: B550-A PRO (MS-7C56) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrA.40:bd10/30/2020:br5.17:svnMicro-StarInternationalCo.,Ltd.:pnMS-7C56:pvr1.0:rvnMicro-StarInternationa
[Kernel-packages] [Bug 1997159] Re: UBSAN Call Trace
I have the same issue. The dmesg output is attached. As a result of this error, the WiFi interface stops working. It can be restored with restarting NetworkManager service. ** Attachment added: "dmesg.0" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1997159/+attachment/5643633/+files/dmesg.0 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1997159 Title: UBSAN Call Trace Status in linux package in Ubuntu: Confirmed Bug description: [76711.937032] [76711.937043] UBSAN: array-index-out-of-bounds in /build/linux-3Zc9YS/linux-5.19.0/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c:3005:36 [76711.937050] index 10 is out of range for type 'u8 [10]' [76711.937054] CPU: 3 PID: 22766 Comm: kworker/3:2 Tainted: P IO 5.19.0-23-generic #24-Ubuntu [76711.937059] Hardware name: Dell Inc. Precision WorkStation T7500 /0D881F, BIOS A18 10/15/2018 [76711.937063] Workqueue: rtl92ee_pci rtl_c2hcmd_wq_callback [rtlwifi] [76711.937083] Call Trace: [76711.937086] [76711.937090] show_stack+0x4e/0x61 [76711.937100] dump_stack_lvl+0x4a/0x6d [76711.937109] dump_stack+0x10/0x18 [76711.937114] ubsan_epilogue+0x9/0x43 [76711.937119] __ubsan_handle_out_of_bounds.cold+0x42/0x47 [76711.937125] ex_btc8192e2ant_bt_info_notify+0x42b/0x4c0 [btcoexist] [76711.937143] exhalbtc_bt_info_notify+0x9c/0xe0 [btcoexist] [76711.937157] rtl_btc_btinfo_notify+0x1d/0x40 [btcoexist] [76711.937170] rtl_c2h_content_parsing.isra.0+0x66/0x110 [rtlwifi] [76711.937181] rtl_c2hcmd_wq_callback+0x3c/0x80 [rtlwifi] [76711.937191] process_one_work+0x225/0x400 [76711.937196] worker_thread+0x50/0x3e0 [76711.937199] ? rescuer_thread+0x3c0/0x3c0 [76711.937202] kthread+0xe9/0x110 [76711.937206] ? kthread_complete_and_exit+0x20/0x20 [76711.937211] ret_from_fork+0x22/0x30 [76711.937217] [76711.937218] [76711.942218] [76711.942221] UBSAN: invalid-load in /build/linux-3Zc9YS/linux-5.19.0/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c:889:11 [76711.942225] load of value 195 is not a valid value for type '_Bool' [76711.942228] CPU: 3 PID: 22766 Comm: kworker/3:2 Tainted: P IO 5.19.0-23-generic #24-Ubuntu [76711.942231] Hardware name: Dell Inc. Precision WorkStation T7500 /0D881F, BIOS A18 10/15/2018 [76711.942233] Workqueue: rtl92ee_pci rtl_c2hcmd_wq_callback [rtlwifi] [76711.942244] Call Trace: [76711.942246] [76711.942248] show_stack+0x4e/0x61 [76711.942253] dump_stack_lvl+0x4a/0x6d [76711.942257] dump_stack+0x10/0x18 [76711.942261] ubsan_epilogue+0x9/0x43 [76711.942264] __ubsan_handle_load_invalid_value.cold+0x42/0x47 [76711.942269] btc8192e2ant_rf_shrink.constprop.0.cold+0x79/0xb2 [btcoexist] [76711.942284] btc8192e2ant_is_common_action+0x1ba/0x460 [btcoexist] [76711.942294] btc8192e2ant_run_coexist_mechanism.part.0+0x55/0x2e0 [btcoexist] [76711.942305] btc8192e2ant_run_coexist_mechanism+0x54/0x70 [btcoexist] [76711.942315] ex_btc8192e2ant_bt_info_notify+0x30f/0x4c0 [btcoexist] [76711.942326] exhalbtc_bt_info_notify+0x9c/0xe0 [btcoexist] [76711.942340] rtl_btc_btinfo_notify+0x1d/0x40 [btcoexist] [76711.942353] rtl_c2h_content_parsing.isra.0+0x66/0x110 [rtlwifi] [76711.942363] rtl_c2hcmd_wq_callback+0x3c/0x80 [rtlwifi] [76711.942374] process_one_work+0x225/0x400 [76711.942377] worker_thread+0x50/0x3e0 [76711.942380] ? rescuer_thread+0x3c0/0x3c0 [76711.942383] kthread+0xe9/0x110 [76711.942387] ? kthread_complete_and_exit+0x20/0x20 [76711.942391] ret_from_fork+0x22/0x30 [76711.942397] [76711.942398] [76711.942400] [76711.942402] UBSAN: invalid-load in /build/linux-3Zc9YS/linux-5.19.0/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c:892:14 [76711.942405] load of value 195 is not a valid value for type '_Bool' [76711.942407] CPU: 3 PID: 22766 Comm: kworker/3:2 Tainted: P IO 5.19.0-23-generic #24-Ubuntu [76711.942410] Hardware name: Dell Inc. Precision WorkStation T7500 /0D881F, BIOS A18 10/15/2018 [76711.942412] Workqueue: rtl92ee_pci rtl_c2hcmd_wq_callback [rtlwifi] [76711.942423] Call Trace: [76711.942424] [76711.942425] show_stack+0x4e/0x61 [76711.942429] dump_stack_lvl+0x4a/0x6d [76711.942434] dump_stack+0x10/0x18 [76711.942437] ubsan_epilogue+0x9/0x43 [76711.942440] __ubsan_handle_load_invalid_value.cold+0x42/0x47 [76711.942445] btc8192e2ant_rf_shrink.con
[Kernel-packages] [Bug 2002385] Re: Memory error while booting
Just installed the latest kernel so far: 5.19.0-28. Immediately I tried installing nVidia 5.25. Although this reported an error and reported it could not be installed. Unfortunately I didn´t make a note so I cannot tell what error that was. When I wanted to try again later, it appeared to be installed anyway. This time I got no problems rebooting so the new kernel seems to have fixed this problem somehow: I now rebooted with no problem, having Kernel 5.19.0-28 and nVidia driver 525 installed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2002385 Title: Memory error while booting Status in linux package in Ubuntu: Confirmed Bug description: I just installed ¨LinuxMint Vera Xfce" again after getting probably the same problem with an Ubuntu intstallation (ubuntu-22.04.1-desktop- amd64.iso) I tried out to get an external HDMI/VDI monitor working on my laptop. All worked fine with the default "Nouveau" video driver installed. I tried some xandr settings to check my external HDMI monitor, which basically worked. Then I noticed only the Nouveau driver was installed. I upgraded to the official (recommended by LinuxMint) NVidia-driver-525, did the compulsary reboot and got stuck with an "out of memory error" during that reboot (I don´t recall the literal message but something like that it was). The only option I had (because the install-USB oviously came with it) was choosing to boot with the previous 5.15.0-56 kernel which to my relief worked. After this boot I reverted to the Nouveau video driver and installed Kernel 5.15.0-57 again. So far this works, but I dare not install the official NVidia-driver-525 again. I don´t know if this is important, but so far I have no /etc/X11/xorg.conf file in place. I'm still trying to find out what a working configuration for my laptop with a secondary external IIyama screen is. I have an Acer Nitro VN7 with 12GB of internal memory, new 240 GB SSD boot drive and 1TB extra SATA HDD. Booting is setup for EFI (which is also far from fully developed it seems) with secure boot disabled. b.t.w. It seems I cannot add more than one attachment to this report. Version log is: Ubuntu 5.15.0-57.63-generic 5.15.74 1) lsb_release -rd: Description: Linux Mint 21.1 Release:21.1 2) n.a. 3) I expected to happen: flawless reboot 4) What happened instead: boot got stuck on a out of memory error. Extra info: default-display-manager (file in /etc/X11/): /usr/sbin/lightdm --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: scutec 3996 F pulseaudio CasperMD5CheckResult: unknown CurrentDesktop: XFCE DistroRelease: Linux Mint 21.1 InstallationDate: Installed on 2023-01-09 (0 days ago) InstallationMedia: Linux Mint 21.1 "Vera" - Release amd64 20221217 MachineType: Acer Aspire VN7-792G NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-57-generic root=UUID=fc2964e7-baed-4419-a709-e3fb79bc9e17 ro quiet splash ProcVersionSignature: Ubuntu 5.15.0-57.63-generic 5.15.74 RelatedPackageVersions: linux-restricted-modules-5.15.0-57-generic N/A linux-backports-modules-5.15.0-57-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.9 Tags: vera Uname: Linux 5.15.0-57-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 05/17/2016 dmi.bios.release: 1.9 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.09 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire VN7-792G dmi.board.vendor: Acer dmi.board.version: V1.09 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.09 dmi.ec.firmware.release: 1.5 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.09:bd05/17/2016:br1.9:efr1.5:svnAcer:pnAspireVN7-792G:pvrV1.09:rvnAcer:rnAspireVN7-792G:rvrV1.09:cvnAcer:ct10:cvrV1.09:skuAspireVN7-792G_103B_1.09: dmi.product.family: SKL dmi.product.name: Aspire VN7-792G dmi.product.sku: Aspire VN7-792G_103B_1.09 dmi.product.version: V1.09 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2002385/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1958191] Re: [i915] Screen flickering in Ubuntu 22.04 (until i915.enable_dc=0 intel_idle.max_cstate=2 are added) (fixed in 5.17.7 and later)
Currently testing HWE-EDGE on 22.04 5.19.0-28-generic #29~22.04.1-Ubuntu The flicker is no longer present here, thanks to all users & devs testing this bug -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1958191 Title: [i915] Screen flickering in Ubuntu 22.04 (until i915.enable_dc=0 intel_idle.max_cstate=2 are added) (fixed in 5.17.7 and later) Status in linux package in Ubuntu: Fix Released Bug description: Ubuntu 22.04 development branch on kernel 5.15.0-17-generic @ 18/1/2022 Booting into desktop gets heavy screen flickering and disforming (unusable) both booting on xorg and wayland on kernel 5.13 it did not occur so heavy (only little glitches once in a while see bug 1948778) adding the kernel paramater intel_idle.max_cstate=4 fixed this i had these same bugs on this machine before: https://bugs.launchpad.net/ubuntu/+source/linux-hwe/+bug/1838644 https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1948778 ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-17-generic 5.15.0-17.17 ProcVersionSignature: Ubuntu 5.15.0-17.17-generic 5.15.12 Uname: Linux 5.15.0-17-generic x86_64 ApportVersion: 2.20.11-0ubuntu75 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lotuspsychje 1201 F pipewire-media- lotuspsychje 1207 F pulseaudio /dev/snd/seq:lotuspsychje 1193 F pipewire CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Tue Jan 18 04:22:00 2022 Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 8087:0025 Intel Corp. Wireless-AC 9260 Bluetooth Adapter Bus 001 Device 003: ID 04f2:b59e Chicony Electronics Co., Ltd Chicony USB2.0 Camera Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Notebook N7x0WU ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-17-generic root=UUID=a41247d1-3bc3-453e-849a-e07fdcca6201 ro quiet splash intel_idle.max_cstate=4 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.15.0-17-generic N/A linux-backports-modules-5.15.0-17-generic N/A linux-firmware 1.204 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/07/2019 dmi.bios.release: 7.13 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 7.13 dmi.board.asset.tag: Tag 12345 dmi.board.name: N7x0WU dmi.board.vendor: Notebook dmi.board.version: Not Applicable dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.ec.firmware.release: 7.14 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr7.13:bd01/07/2019:br7.13:efr7.14:svnNotebook:pnN7x0WU:pvrNotApplicable:rvnNotebook:rnN7x0WU:rvrNotApplicable:cvnNoEnclosure:ct10:cvrN/A:skuNotApplicable: dmi.product.family: Not Applicable dmi.product.name: N7x0WU dmi.product.sku: Not Applicable dmi.product.version: Not Applicable dmi.sys.vendor: Notebook To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1958191/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2003914] Re: Focal update: v5.4.229 upstream stable release
** Changed in: linux (Ubuntu Focal) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003914 Title: Focal update: v5.4.229 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.4.229 upstream stable release from git://git.kernel.org/ tracing/ring-buffer: Only do full wait when cpu != RING_BUFFER_ALL_CPUS udf: Discard preallocation before extending file with a hole udf: Fix preallocation discarding at indirect extent boundary udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size udf: Fix extending file within last block usb: gadget: uvc: Prevent buffer overflow in setup handler USB: serial: option: add Quectel EM05-G modem USB: serial: cp210x: add Kamstrup RF sniffer PIDs USB: serial: f81232: fix division by zero on line-speed change USB: serial: f81534: fix division by zero on line-speed change igb: Initialize mailbox message for VF reset xen-netback: move removal of "hotplug-status" to the right place HID: ite: Add support for Acer S1002 keyboard-dock HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10 HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk net: loopback: use NET_NAME_PREDICTABLE for name_assign_type usb: musb: remove extra check in musb_gadget_vbus_draw ARM: dts: qcom: apq8064: fix coresight compatible arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static arm: dts: spear600: Fix clcd interrupt soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init() perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators arm64: dts: mt2712e: Fix unit address for pinctrl node arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names arm64: dts: mt2712-evb: Fix usb vbus regulators unit names arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port ARM: dts: turris-omnia: Add ethernet aliases ARM: dts: turris-omnia: Add switch port 6 node arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC pstore/ram: Fix error return code in ramoops_probe() ARM: mmp: fix timer_read delay pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP tpm/tpm_crb: Fix error message in __crb_relinquish_locality() cpuidle: dt: Return the correct numbers of parsed idle states alpha: fix syscall entry in !AUDUT_SYSCALL case PM: hibernate: Fix mistake in kerneldoc comment fs: don't audit the capability check in simple_xattr_list() selftests/ftrace: event_triggers: wait longer for test_event_enable perf: Fix possible memleak in pmu_dev_alloc() timerqueue: Use rb_entry_safe() in timerqueue_getnext() proc: fixup uptime selftest lib/fonts: fix undefined behavior in bit shift for get_default_font ocfs2: fix memory leak in ocfs2_stack_glue_init() MIPS: vpe-mt: fix possible memory leak while module exiting MIPS: vpe-cmp: fix possible memory leak while module exiting selftests/efivarfs: Add checking of the test return value PNP: fix name memory leak in pnp_alloc_dev() perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox() irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe() EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() nfsd: don't call nfsd_file_put from client states seqfile display genirq/irqdesc: Don't try to remove non-existing sysfs files cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed v
[Kernel-packages] [Bug 2003904] Re: Focal update: v5.4.228 upstream stable release
** Changed in: linux (Ubuntu Focal) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003904 Title: Focal update: v5.4.228 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.4.228 upstream stable release from git://git.kernel.org/ x86/smpboot: Move rcu_cpu_starting() earlier mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page block: unhash blkdev part inode when the part is deleted ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() pinctrl: meditatek: Startup with the IRQs disabled can: sja1000: fix size of OCR_MODE_MASK define can: mcba_usb: Fix termination command argument ASoC: ops: Correct bounds check for second channel on SX controls Linux 5.4.228 UBUNTU: Upstream stable to v5.4.228 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2003904/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2003896] Re: Focal update: v5.4.226 upstream stable release
Skipped "drm/i915: fix TLB invalidation for Gen12 video and compute engines" because it was already applied as CVE-2022-4139. ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2022-4139 ** Changed in: linux (Ubuntu Focal) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003896 Title: Focal update: v5.4.226 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.4.226 upstream stable release from git://git.kernel.org/ wifi: mac80211: fix memory free error when registering wiphy fail wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support audit: fix undefined behavior in bit shift for AUDIT_BIT wifi: mac80211: Fix ack frame idr leak when mesh has no route spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017) block, bfq: fix null pointer dereference in bfq_bio_bfqg() arm64/syscall: Include asm/ptrace.h in syscall_wrapper header. RISC-V: vdso: Do not add missing symbols to version section in linker script MIPS: pic32: treat port as signed integer af_key: Fix send_acquire race with pfkey_register ARM: dts: am335x-pcm-953: Define fixed regulators in root node ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove regulator: core: fix kobject release warning and memory leak in regulator_register() regulator: core: fix UAF in destroy_regulator() bus: sunxi-rsb: Support atomic transfers tee: optee: fix possible memory leak in optee_register_device() ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl net: liquidio: simplify if expression nfc/nci: fix race with opening and closing net: pch_gbe: fix potential memleak in pch_gbe_tx_queue() 9p/fd: fix issue of list_del corruption in p9_fd_cancel() ARM: mxs: fix memory leak in mxs_machine_init() net/mlx4: Check retval of mlx4_bitmap_init net/qla3xxx: fix potential memleak in ql3xxx_send() net: pch_gbe: fix pci device refcount leak while module exiting nfp: add port from netdev validation for EEPROM access Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work() Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register() net/mlx5: Fix FW tracer timestamp calculation tipc: set con sock in tipc_conn_alloc tipc: add an extra conn_get in tipc_conn_alloc tipc: check skb_linearize() return value in tipc_disc_rcv() xfrm: Fix ignored return value in xfrm6_init() NFC: nci: fix memory leak in nci_rx_data_packet() regulator: twl6030: re-add TWL6032_SUBCLASS bnx2x: fix pci device refcount leak in bnx2x_vf_is_pcie_pending() dccp/tcp: Reset saddr on failure after inet6?_hash_connect(). s390/dasd: fix no record found for raw_track_access nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION nfc: st-nci: fix memory leaks in EVT_TRANSACTION net: thunderx: Fix the ACPI memory leak s390/crashdump: fix TOD programmable field size lib/vdso: use "grep -E" instead of "egrep" usb: dwc3: exynos: Fix remove() function arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency iio: light: apds9960: fix wrong register for gesture gain iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash nios2: add FORCE for vmlinuz.gz iio: ms5611: Simplify IO callback parameters iio: pressure: ms5611: fixed value compensation bug ceph: do not update snapshot context when there is no new snapshot ceph: avoid putting the realm twice when decoding snaps fails firmware: google: Release devices before unregistering the bus firmware: coreboot: Register bus in module init nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty gcov: clang: fix the buffer overflow issue Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01 serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios() xen/platform-pci: add missing free_irq() in error path platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr() platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017) platform/x86: hp-wmi: Ignore Smart Exp
[Kernel-packages] [Bug 2003901] Re: Focal update: v5.4.227 upstream stable release
** Changed in: linux (Ubuntu Focal) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003901 Title: Focal update: v5.4.227 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Focal: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.4.227 upstream stable release from git://git.kernel.org/ arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series arm: dts: rockchip: fix node name for hym8563 rtc ARM: dts: rockchip: fix ir-receiver node names ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188 9p/fd: Use P9_HDRSZ for header size regulator: slg51000: Wait after asserting CS pin ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event btrfs: send: avoid unaligned encoded writes when attempting to clone range ASoC: soc-pcm: Add NULL check in BE reparenting regulator: twl6030: fix get status of twl6032 regulators fbcon: Use kzalloc() in fbcon_prepare_logo() 9p/xen: check logical size for buffer size net: usb: qmi_wwan: add u-blox 0x1342 composition mm/khugepaged: take the right locks for page table retraction mm/khugepaged: fix GUP-fast interaction by sending IPI mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths xen/netback: do some code cleanup xen/netback: don't call kfree_skb() with interrupts disabled Revert "net: dsa: b53: Fix valid setting for MDB entries" media: v4l2-dv-timings.c: fix too strict blanking sanity checks memcg: fix possible use-after-free in memcg_write_event_control() mm/gup: fix gup_pud_range() for dax KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field drm/shmem-helper: Remove errant put in error path HID: usbhid: Add ALWAYS_POLL quirk for some mice HID: hid-lg4ff: Add check for empty lbuf HID: core: fix shift-out-of-bounds in hid_report_raw_event can: af_can: fix NULL pointer dereference in can_rcv_filter ieee802154: cc2520: Fix error return code in cc2520_hw_init() ca8210: Fix crash by zero initializing data drm/bridge: ti-sn65dsi86: Fix output polarity setting bug gpio: amd8111: Fix PCI device reference count leak e1000e: Fix TX dispatch condition igb: Allocate MSI-X vector when testing af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn() Bluetooth: Fix not cleanup led when bt_init fails net: dsa: ksz: Check return value selftests: rtnetlink: correct xfrm policy rule in kci_test_ipsec_offload mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() net: encx24j600: Add parentheses to fix precedence net: encx24j600: Fix invalid logic in reading of MISTAT register xen-netfront: Fix NULL sring after live migration net: mvneta: Prevent out of bounds read in mvneta_config_rss() i40e: Fix not setting default xps_cpus after reset i40e: Fix for VF MAC address 0 i40e: Disallow ip4 and ip6 l4_4_bytes NFC: nci: Bounds check struct nfc_target arrays nvme initialize core quirks before calling nvme_init_subsystem net: stmmac: fix "snps,axi-config" node property parsing net: thunderx: Fix missing destroy_workqueue of nicvf_rx_mode_wq net: hisilicon: Fix potential use-after-free in hisi_femac_rx() net: hisilicon: Fix potential use-after-free in hix5hd2_rx() tipc: Fix potential OOB in tipc_link_proto_rcv() ipv4: Fix incorrect route flushing when source address is deleted ipv4: Fix incorrect route flushing when table ID 0 is used ethernet: aeroflex: fix potential skb leak in greth_init_rings() xen/netback: fix build warning net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq() ipv6: avoid use-after-free in ip6_fragment() net: mvneta: Fix an out of bounds check can: esd_usb: Allow REC and TEC to return to zero Linux 5.4.227 UBUNTU: Upstream stable to v5.4.227 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2003901/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : h
[Kernel-packages] [Bug 2003139] Re: Jammy update: v5.15.85 upstream stable release
** Changed in: linux (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003139 Title: Jammy update: v5.15.85 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.15.85 upstream stable release from git://git.kernel.org/ udf: Discard preallocation before extending file with a hole udf: Fix preallocation discarding at indirect extent boundary udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size udf: Fix extending file within last block usb: gadget: uvc: Prevent buffer overflow in setup handler USB: serial: option: add Quectel EM05-G modem USB: serial: cp210x: add Kamstrup RF sniffer PIDs USB: serial: f81232: fix division by zero on line-speed change USB: serial: f81534: fix division by zero on line-speed change xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N igb: Initialize mailbox message for VF reset usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system for Raptor Lake HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk selftests: net: Use "grep -E" instead of "egrep" net: loopback: use NET_NAME_PREDICTABLE for name_assign_type Linux 5.15.85 UBUNTU: Upstream stable to v5.15.85 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2003139/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2003137] Re: Jammy update: v5.15.84 upstream stable release
** Changed in: linux (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003137 Title: Jammy update: v5.15.84 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.15.84 upstream stable release from git://git.kernel.org/ x86/vdso: Conditionally export __vdso_sgx_enter_enclave() vfs: fix copy_file_range() averts filesystem freeze protection ASoC: fsl_micfil: explicitly clear software reset bit ASoC: fsl_micfil: explicitly clear CHnF flags ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() libbpf: Use page size as max_entries when probing ring buffer map pinctrl: meditatek: Startup with the IRQs disabled can: sja1000: fix size of OCR_MODE_MASK define can: mcba_usb: Fix termination command argument net: fec: don't reset irq coalesce settings to defaults on "ip link up" ASoC: cs42l51: Correct PGA Volume minimum value perf: Fix perf_pending_task() UaF nvme-pci: clear the prp2 field when not used ASoC: ops: Correct bounds check for second channel on SX controls net: fec: properly guard irq coalesce setup Linux 5.15.84 UBUNTU: Upstream stable to v5.15.84 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2003137/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2003134] Re: Jammy update: v5.15.83 upstream stable release
** Changed in: linux (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003134 Title: Jammy update: v5.15.83 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.15.83 upstream stable release from git://git.kernel.org/ clk: generalize devm_clk_get() a bit clk: Provide new devm_clk helpers for prepared and enabled clocks mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse() arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series arm: dts: rockchip: fix node name for hym8563 rtc arm: dts: rockchip: remove clock-frequency from rtc ARM: dts: rockchip: fix ir-receiver node names arm64: dts: rockchip: fix ir-receiver node names ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name fs: use acquire ordering in __fget_light() ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register spi: mediatek: Fix DEVAPC Violation at KO Remove ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188 ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions 9p/fd: Use P9_HDRSZ for header size regulator: slg51000: Wait after asserting CS pin ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event selftests/net: Find nettest in current directory btrfs: send: avoid unaligned encoded writes when attempting to clone range ASoC: soc-pcm: Add NULL check in BE reparenting regulator: twl6030: fix get status of twl6032 regulators fbcon: Use kzalloc() in fbcon_prepare_logo() usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer 9p/xen: check logical size for buffer size net: usb: qmi_wwan: add u-blox 0x1342 composition mm/khugepaged: take the right locks for page table retraction mm/khugepaged: fix GUP-fast interaction by sending IPI mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths rtc: mc146818-lib: extract mc146818_avoid_UIP rtc: cmos: avoid UIP when writing alarm time rtc: cmos: avoid UIP when reading alarm time cifs: fix use-after-free caused by invalid pointer `hostname` drm/bridge: anx7625: Fix edid_read break case in sp_tx_edid_read() xen/netback: do some code cleanup xen/netback: don't call kfree_skb() with interrupts disabled media: videobuf2-core: take mmap_lock in vb2_get_unmapped_area() soundwire: intel: Initialize clock stop timeout media: v4l2-dv-timings.c: fix too strict blanking sanity checks memcg: fix possible use-after-free in memcg_write_event_control() mm/gup: fix gup_pud_range() for dax Bluetooth: btusb: Add debug message for CSR controllers Bluetooth: Fix crash when replugging CSR fake controllers net: mana: Fix race on per-CQ variable napi work_done KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field drm/vmwgfx: Don't use screen objects when SEV is active drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend drm/shmem-helper: Remove errant put in error path drm/shmem-helper: Avoid vm_open error paths net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing() HID: usbhid: Add ALWAYS_POLL quirk for some mice HID: hid-lg4ff: Add check for empty lbuf HID: core: fix shift-out-of-bounds in hid_report_raw_event HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10 can: af_can: fix NULL pointer dereference in can_rcv_filter clk: Fix pointer casting to prevent oops in devm_clk_release() gpiolib: improve coding style for local variables gpiolib: check the 'ngpios' property in core gpiolib code gpiolib: fix memory leak in gpiochip_setup_dev() netfilter: nft_set_pipapo: Actually validate intervals in fields after the first one drm/vmwgfx: Fix race issue calling pin_user_pages ieee802154: cc2520: Fix error return code in cc2520_hw_init() ca8210: Fix crash by zero initializing data netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark drm/bridge: ti-sn65dsi86: Fix output polarity setting bug gpio: amd8111: Fix PCI device reference count leak e1000e: Fix TX dispatch condition igb: Allocate MSI-X vector when tes
[Kernel-packages] [Bug 2003132] Re: Jammy update: v5.15.82 upstream stable release
** Changed in: linux (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003132 Title: Jammy update: v5.15.82 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.15.82 upstream stable release from git://git.kernel.org/ arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored drm/i915: Create a dummy object for gen6 ppgtt drm/i915/gt: Use i915_vm_put on ppgtt_create error paths erofs: fix order >= MAX_ORDER warning due to crafted negative i_size btrfs: sink iterator parameter to btrfs_ioctl_logical_to_ino btrfs: free btrfs_path before copying inodes to userspace spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock btrfs: move QUOTA_ENABLED check to rescan_should_stop from btrfs_qgroup_rescan_worker btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit() drm/display/dp_mst: Fix drm_dp_mst_add_affected_dsc_crtcs() return code drm/amdgpu: update drm_display_info correctly when the edid is read drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly when the edid is read" iio: health: afe4403: Fix oob read in afe4403_read_raw iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw iio: light: rpr0521: add missing Kconfig dependencies bpf, perf: Use subprog name when reporting subprog ksymbol scripts/faddr2line: Fix regression in name resolution on ppc64le ARM: at91: rm9200: fix usb device clock id libbpf: Handle size overflow for ringbuf mmap hwmon: (ltc2947) fix temperature scaling hwmon: (ina3221) Fix shunt sum critical calculation hwmon: (i5500_temp) fix missing pci_disable_device() hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails bpf: Do not copy spin lock field from user in bpf_selem_alloc nvmem: rmem: Fix return value check in rmem_read() of: property: decrement node refcount in of_fwnode_get_reference_args() ixgbevf: Fix resource leak in ixgbevf_init_module() i40e: Fix error handling in i40e_init_module() fm10k: Fix error handling in fm10k_init_module() iavf: remove redundant ret variable iavf: Fix error handling in iavf_init_module() e100: Fix possible use after free in e100_xmit_prepare net/mlx5: DR, Fix uninitialized var warning net/mlx5: Fix uninitialized variable bug in outlen_write() net/mlx5e: Fix use-after-free when reverting termination table can: sja1000_isa: sja1000_isa_probe(): add missing free_sja1000dev() can: cc770: cc770_isa_probe(): add missing free_cc770dev() can: etas_es58x: es58x_init_netdev(): free netdev when register_candev() can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods can: m_can: Add check for devm_clk_get qlcnic: fix sleep-in-atomic-context bugs caused by msleep aquantia: Do not purge addresses when setting the number of rings wifi: cfg80211: fix buffer overflow in elem comparison wifi: cfg80211: don't allow multi-BSSID in S1G wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration net: phy: fix null-ptr-deref while probe() failed net: ethernet: ti: am65-cpsw: fix error handling in am65_cpsw_nuss_probe() net: net_netdev: Fix error handling in ntb_netdev_init_module() net/9p: Fix a potential socket leak in p9_socket_open net: ethernet: nixge: fix NULL dereference net: wwan: iosm: fix kernel test robot reported error net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type dsa: lan9303: Correct stat name tipc: re-fetch skb cb after tipc_msg_validate net: hsr: Fix potential use-after-free net: mdiobus: fix unbalanced node reference count afs: Fix fileserver probe RTT handling net: tun: Fix use-after-free in tun_detach() packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE sctp: fix memory leak in sctp_stream_outq_migrate() net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed hwmon: (coretemp) Check for null before removing sysfs attrs hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() riscv: vdso: fix section overlapping under some conditions riscv: mm: Proper page permissions after initmem free ALSA: dice: fix regression for Lexicon I-ONIX FW810S error-injection: Add prompt for function error injection tools/vm/slabinfo-g
[Kernel-packages] [Bug 2003130] Re: Jammy update: v5.15.81 upstream stable release
Skipped "drm/i915: fix TLB invalidation for Gen12 video and compute engines" since it was already applied as CVE-2022-4139. ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2022-4139 ** Changed in: linux (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003130 Title: Jammy update: v5.15.81 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.15.81 upstream stable release from git://git.kernel.org/ ASoC: fsl_sai: use local device pointer ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N serial: Add rs485_supported to uart_port serial: fsl_lpuart: Fill in rs485_supported tty: serial: fsl_lpuart: don't break the on-going transfer when global reset sctp: remove the unnecessary sinfo_stream check in sctp_prsctp_prune_unsent sctp: clear out_curr if all frag chunks of current msg are pruned cifs: introduce new helper for cifs_reconnect() cifs: split out dfs code from cifs_reconnect() cifs: support nested dfs links over reconnect cifs: Fix connections leak when tlink setup failed ata: libata-scsi: simplify __ata_scsi_queuecmd() ata: libata-core: do not issue non-internal commands once EH is pending drm/display: Don't assume dual mode adaptors support i2c sub-addressing nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro nvme-pci: disable namespace identifiers for the MAXIO MAP1001 nvme-pci: disable write zeroes on various Kingston SSD nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000 iio: ms5611: Simplify IO callback parameters iio: pressure: ms5611: fixed value compensation bug ceph: do not update snapshot context when there is no new snapshot ceph: avoid putting the realm twice when decoding snaps fails x86/sgx: Create utility to validate user provided offset and length x86/sgx: Add overflow check in sgx_validate_offset_length() binder: validate alloc->mm in ->mmap() handler ceph: Use kcalloc for allocating multiple elements ceph: fix NULL pointer dereference for req->r_session wifi: mac80211: fix memory free error when registering wiphy fail wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support riscv: dts: sifive unleashed: Add PWM controlled LEDs audit: fix undefined behavior in bit shift for AUDIT_BIT wifi: airo: do not assign -1 to unsigned char wifi: mac80211: Fix ack frame idr leak when mesh has no route wifi: ath11k: Fix QCN9074 firmware boot on x86 spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run selftests/bpf: Add verifier test for release_reference() Revert "net: macsec: report real_dev features when HW offloading is enabled" platform/x86: ideapad-laptop: Disable touchpad_switch platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1 platform/x86/intel/pmt: Sapphire Rapids PMT errata fix platform/x86/intel/hid: Add some ACPI device IDs scsi: ibmvfc: Avoid path failures during live migration scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017) block, bfq: fix null pointer dereference in bfq_bio_bfqg() arm64/syscall: Include asm/ptrace.h in syscall_wrapper header. nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly"" ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue RISC-V: vdso: Do not add missing symbols to version section in linker script MIPS: pic32: treat port as signed integer xfrm: fix "disable_policy" on ipv4 early demux xfrm: replay: Fix ESN wrap around for GSO af_key: Fix send_acquire race with pfkey_register ARM: dts: am335x-pcm-953: Define fixed regulators in root node ASoC: hdac_hda: fix hda pcm buffer overflow issue ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open() x86/hyperv: Restore VP assist page after cpu offlining/onlining scsi: storvsc: Fix handling of srb_status and capacity change events ASoC: max98373: Add checks for devm_kcalloc regulator: core: fix kobject release warning and memory leak in regulator_register() spi: dw-dma: decrease reference count in dw_spi_dma_init_mfld() regulator: core: fix UA
[Kernel-packages] [Bug 2003122] Re: Jammy update: v5.15.80 upstream stable release
** Changed in: linux (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2003122 Title: Jammy update: v5.15.80 upstream stable release Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Bug description: SRU Justification Impact: The upstream process for stable tree updates is quite similar in scope to the Ubuntu SRU process, e.g., each patch has to demonstrably fix a bug, and each patch is vetted by upstream by originating either directly from a mainline/stable Linux tree or a minimally backported form of that patch. The following upstream stable patches should be included in the Ubuntu kernel: v5.15.80 upstream stable release from git://git.kernel.org/ mm: hwpoison: refactor refcount check handling mm: hwpoison: handle non-anonymous THP correctly mm: shmem: don't truncate page if memory failure happens ASoC: wm5102: Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe" ASoC: wm5110: Revert "ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe" ASoC: wm8997: Revert "ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe" ASoC: mt6660: Keep the pm_runtime enables before component stuff in mt6660_i2c_probe ASoC: rt1019: Fix the TDM settings ASoC: wm8962: Add an event handler for TEMP_HP and TEMP_SPK spi: intel: Fix the offset to get the 64K erase opcode ASoC: codecs: jz4725b: add missed Line In power control bit ASoC: codecs: jz4725b: fix reported volume for Master ctl ASoC: codecs: jz4725b: use right control for Capture Volume ASoC: codecs: jz4725b: fix capture selector naming ASoC: Intel: sof_sdw: add quirk variant for LAPBC710 NUC15 selftests/futex: fix build for clang selftests/intel_pstate: fix build for ARCH=x86_64 ASoC: rt1308-sdw: add the default value of some registers drm/amd/display: Remove wrong pipe control lock ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[] RDMA/efa: Add EFA 0xefa2 PCI ID btrfs: raid56: properly handle the error when unable to find the missing stripe NFSv4: Retry LOCK on OLD_STATEID during delegation return ACPI: x86: Add another system to quirk list for forcing StorageD3Enable firmware: arm_scmi: Cleanup the core driver removal callback i2c: tegra: Allocate DMA memory for DMA engine i2c: i801: add lis3lv02d's I2C address for Vostro 5568 drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid btrfs: remove pointless and double ulist frees in error paths of qgroup tests x86/cpu: Add several Intel server CPU model numbers ASoC: codecs: jz4725b: Fix spelling mistake "Sourc" -> "Source", "Routee" -> "Route" mtd: spi-nor: intel-spi: Disable write protection only if asked spi: intel: Use correct mask for flash and protected regions KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet hugetlbfs: don't delete error page from pagecache arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed spi: stm32: Print summary 'callbacks suppressed' message ARM: dts: at91: sama7g5: fix signal name of pin PB2 ASoC: core: Fix use-after-free in snd_soc_exit() ASoC: tas2770: Fix set_tdm_slot in case of single slot ASoC: tas2764: Fix set_tdm_slot in case of single slot ARM: at91: pm: avoid soft resetting AC DLL serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250: omap: Flush PM QOS work on remove serial: imx: Add missing .thaw_noirq hook tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() ASoC: soc-utils: Remove __exit for snd_soc_util_exit() pinctrl: rockchip: list all pins in a possible mux route for PX30 scsi: scsi_transport_sas: Fix error handling in sas_phy_add() block: sed-opal: kmalloc the cmd/resp buffers bpf: Fix memory leaks in __check_func_call arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro siox: fix possible memory leak in siox_device_add() parport_pc: Avoid FIFO port location truncation pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map drm/vc4: kms: Fix IS_ERR() vs NULL check for vc4_kms drm/panel: simple: set bpc field for logic technologies displays drm/drv: Fix potential memory leak in drm_dev_init() drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker() arm64: dts: imx8mm: Fix N
[Kernel-packages] [Bug 1834213] Re: After kernel upgrade, nf_conntrack_ipv4 module unloaded, no IP traffic to instances
Reviewed: https://review.opendev.org/c/openstack/neutron/+/871659 Committed: https://opendev.org/openstack/neutron/commit/c609084b59c68f003153a58c2063f99b52f169e0 Submitter: "Zuul (22348)" Branch:master commit c609084b59c68f003153a58c2063f99b52f169e0 Author: Brian Haley Date: Tue Jan 24 15:16:47 2023 -0500 Add doc note on nf_conntrack module requirement The OVS firewall driver requires nf_conntrack module(s) to be loaded to function properly. While they are typically loaded automatically, add a note to the admin guide about the requirement to make it explicit. Closes-bug: #1834213 Change-Id: I55871eff1e37d4155b8d2b5ae8c182d160c4af9f ** Changed in: neutron Status: In Progress => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1834213 Title: After kernel upgrade, nf_conntrack_ipv4 module unloaded, no IP traffic to instances Status in OpenStack Neutron Open vSwitch Charm: Fix Released Status in neutron: Fix Released Status in linux package in Ubuntu: Confirmed Bug description: With an environment running Xenial-Queens, and having just upgraded the linux-image-generic kernel for MDS patching, a few of our hypervisor hosts that were rebooted (3 out of 100) ended up dropping IP (tcp/udp) ingress traffic. It turns out that nf_conntrack module was loaded, but nf_conntrack_ipv4 was not loading, and the traffic was being dropped by this rule: table=72, n_packets=214989, priority=50,ct_state=+inv+trk actions=resubmit(,93) The ct_state "inv" means invalid conntrack state, which the manpage describes as: The state is invalid, meaning that the connection tracker couldn’t identify the connection. This flag is a catch- all for problems in the connection or the connection tracker, such as: • L3/L4 protocol handler is not loaded/unavailable. With the Linux kernel datapath, this may mean that the nf_conntrack_ipv4 or nf_conntrack_ipv6 modules are not loaded. • L3/L4 protocol handler determines that the packet is malformed. • Packets are unexpected length for protocol. It appears that there may be an issue when patching the OS of a hypervisor not running instances may fail to update initrd to load nf_conntrack_ipv4 (and/or _ipv6). I couldn't find anywhere in the charm code that this would be loaded unless the charm's "harden" option is used on nova-compute charm (see charmhelpers contrib/host templates). It is unset in our environment, so we are not using any special module probing. Did nf_conntrack_ipv4 get split out from nf_conntrack in recent kernel upgrades or is it possible that the charm should define a modprobe file if we have the OVS firewall driver configured? To manage notifications about this bug go to: https://bugs.launchpad.net/charm-neutron-openvswitch/+bug/1834213/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1988797] Re: pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released ** Changed in: hwe-next Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1988797 Title: pcieport :00:1b.0: PCIe Bus Error: severity=Uncorrected (Non- Fatal), type=Transaction Layer, (Requester ID) Status in HWE Next: Fix Released Status in OEM Priority Project: New Status in linux package in Ubuntu: Fix Released Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux-oem-5.17 package in Ubuntu: Invalid Status in linux-oem-6.0 package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Released Status in linux-oem-5.14 source package in Jammy: Invalid Status in linux-oem-5.17 source package in Jammy: Fix Released Status in linux-oem-6.0 source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux-oem-5.14 source package in Kinetic: Invalid Status in linux-oem-5.17 source package in Kinetic: Invalid Status in linux-oem-6.0 source package in Kinetic: Invalid Bug description: My kernel log periodically bursts with: [10405.588287] pcieport :00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [10405.593393] pcieport :00:1b.0: device [8086:7ac4] error status/mask=0010/4000 [10405.598564] pcieport :00:1b.0:[20] UnsupReq (First) [10405.603829] pcieport :00:1b.0: AER: TLP Header: 3400 0152 [10405.609563] pcieport :00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [10405.614959] pcieport :00:1b.0: device [8086:7ac4] error status/mask=0010/4000 [10405.620296] pcieport :00:1b.0:[20] UnsupReq (First) [10405.625554] pcieport :00:1b.0: AER: TLP Header: 3400 0152 [10405.631180] pcieport :00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [10405.636495] pcieport :00:1b.0: device [8086:7ac4] error status/mask=0010/4000 [10405.641867] pcieport :00:1b.0:[20] UnsupReq (First) [10405.647169] pcieport :00:1b.0: AER: TLP Header: 3400 0152 [10405.652919] pcieport :00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [10405.658369] pcieport :00:1b.0: device [8086:7ac4] error status/mask=0010/4000 [10405.663803] pcieport :00:1b.0:[20] UnsupReq (First) [10405.669263] pcieport :00:1b.0: AER: TLP Header: 3400 0152 [10405.675130] pcieport :00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [10405.680699] pcieport :00:1b.0: device [8086:7ac4] error status/mask=0010/4000 [10405.686267] pcieport :00:1b.0:[20] UnsupReq (First) [10405.691759] pcieport :00:1b.0: AER: TLP Header: 3400 0152 This has happened even since I got the machine. It also happened with 5.15. ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: linux-image-5.19.0-15-generic 5.19.0-15.15 ProcVersionSignature: Ubuntu 5.19.0-15.15-generic 5.19.0 Uname: Linux 5.19.0-15-generic x86_64 ApportVersion: 2.23.0-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dan2477 F wireplumber /dev/snd/seq:dan2474 F pipewire CRDA: N/A CasperMD5CheckResult: pass Date: Tue Sep 6 13:52:35 2022 InstallationDate: Installed on 2022-07-20 (47 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Alpha amd64 (20220718) MachineType: Intel(R) Client Systems NUC12DCMi7 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.19.0-15-generic root=UUID=a69020a6-a1dd-436c-b75a-be890a4063be ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.19.0-15-generic N/A linux-backports-modules-5.19.0-15-generic N/A linux-firmware 20220831.gitd3c92280-0ubuntu1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/20/2021 dmi.bios.release: 5.24 dmi.bios.vendor: Intel Corp. dmi.bios.version: EDADL579.0046.2021.1220.2351 dmi.board.name: NUC12EDBi7 dmi.board.vendor: Intel Corporation dmi.board.version: M27908-302 dmi.chassis.type: 35 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.ec.firmware.release: 3.7 dmi
[Kernel-packages] [Bug 1999406] Please test proposed package
Hello You-Sheng, or anyone else affected, Accepted linux-firmware into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/1.187.36 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1999406 Title: Update firmware for hwe/oem kernel migrations Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Focal: Fix Committed Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Lunar: Fix Released Bug description: [SRU Justification] [Impact] When migrating to a new hwe kernel or introduced a oem kernel of a newer version, the firmware blobs might not match the expectation of the new kernel. For example, a hwe-5.15 on Focal may include new drivers that relies on firmware blobs that are only available in Jammy. [Fix] A previously obsoleted (and removed in Kinetic and Lunar) script `list-lts-update-files` is used to enumerate firmware blobs to be backported. It's retored and revised with additional support to pick the right blobs especially in regard to ath and iwlwifi drivers. On Focal, the commits in need are enumerated by: $ debian/scripts/list-lts-update-files focal jammy \ ../jammy/debian.master/abi/fwinfo | \ xargs git log --graph --oneline focal..jammy -- * 36f2ea9f7 ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 * 05b5dc001 ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin * 7a3005059 brcm: Add 43455 based AP6255 NVRAM for the ACEPC T8 Mini PC * ad185afa1 cypress: update firmware for cyw4373 sdio * 77d3eb8ef cypress: update firmware for cyw43570 pcie * 92e9acdbd cypress: update firmware for cyw4356 sdio * 5f88084be cypress: update firmware for cyw4354 sdio * f97e31677 cypress: update firmware for cyw43455 sdio * 3df9ea0b9 cypress: update firmware for cyw43430 sdio * 6150015cf cypress: update firmware for cyw43012 sdio * 2548d065b brcm: Add nvram for the Chuwi Hi8 (CWI509) tablet * e45c137e7 brcm: Add nvram for the Predia Basic tablet * d52886242 brcm: Add NVRAM for Vamrs 96boards Rock960 * b503c9660 Merge branch 'ath10k-20201023' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main |\ | * 34cb5fce2 ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 | * c0a8efd24 ath11k: IPQ8074 hw2.0: add board-2.bin | * ac7f5e93f ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 | * 2594e510a ath11k: IPQ6018 hw1.0: add board-2.bin * 04f71fe56 cypress: add Cypress firmware and clm_blob files Commit 05b5dc001 and 36f2ea9f7 include updates to other existing files, so they are dropped from this SRU. An additional commit that modifies only WHENCE, commit 0b558e8a7, found when resolving conflicts, were also added. On Jammy, $ debian/scripts/list-lts-update-files jammy kinetic \ ../kinetic/debian.master/abi/fwinfo | \ xargs git log --graph --oneline jammy..kinetic -- * 35f8de521 UBUNTU: Add pre-compiled echoaudio firmware * c954892f6 Add initial AzureWave AW-CM256SM NVRAM file * 86f0c5642 ath10k: WCN3990 hw1.0: add board-2.bin * c3624ebd6 Merge branch 'ath10k-20220423' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main |\ | * 1962cbab3 ath10k: QCA99X0 hw2.0: add board-2.bin | * 0d5e9f7e0 ath11k: WCN6750 hw1.0: add to WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 | * a50132f7f ath11k: WCN6750 hw1.0: add board-2.bin | * 97f8b7563 ath11k: QCN9074 hw1.0: add to WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 | * f56505fe2 ath11k: QCN9074 hw1.0: add board-2.bin
[Kernel-packages] [Bug 1999375] Please test proposed package
Hello Timo, or anyone else affected, Accepted linux-firmware into jammy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220329.git681281e4-0ubuntu3.10 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- jammy to verification-done-jammy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-jammy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1999375 Title: Update dg2_dmc to 2.08 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Kinetic: Fix Committed Bug description: [Impact] i915/dg2 needs this new firmware version to fix some undisclosed bugs [Test case] Boot a system with the new firmware and a kernel that uses it, and check that the correct version is loaded. [Where things could go wrong] If the kernel is updated before the firmware is available, then loading i915 fails as it can't find the firmware it requires. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1999375/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1999406] Please test proposed package
Hello You-Sheng, or anyone else affected, Accepted linux-firmware into jammy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220329.git681281e4-0ubuntu3.10 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- jammy to verification-done-jammy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-jammy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1999406 Title: Update firmware for hwe/oem kernel migrations Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Focal: Fix Committed Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Lunar: Fix Released Bug description: [SRU Justification] [Impact] When migrating to a new hwe kernel or introduced a oem kernel of a newer version, the firmware blobs might not match the expectation of the new kernel. For example, a hwe-5.15 on Focal may include new drivers that relies on firmware blobs that are only available in Jammy. [Fix] A previously obsoleted (and removed in Kinetic and Lunar) script `list-lts-update-files` is used to enumerate firmware blobs to be backported. It's retored and revised with additional support to pick the right blobs especially in regard to ath and iwlwifi drivers. On Focal, the commits in need are enumerated by: $ debian/scripts/list-lts-update-files focal jammy \ ../jammy/debian.master/abi/fwinfo | \ xargs git log --graph --oneline focal..jammy -- * 36f2ea9f7 ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 * 05b5dc001 ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin * 7a3005059 brcm: Add 43455 based AP6255 NVRAM for the ACEPC T8 Mini PC * ad185afa1 cypress: update firmware for cyw4373 sdio * 77d3eb8ef cypress: update firmware for cyw43570 pcie * 92e9acdbd cypress: update firmware for cyw4356 sdio * 5f88084be cypress: update firmware for cyw4354 sdio * f97e31677 cypress: update firmware for cyw43455 sdio * 3df9ea0b9 cypress: update firmware for cyw43430 sdio * 6150015cf cypress: update firmware for cyw43012 sdio * 2548d065b brcm: Add nvram for the Chuwi Hi8 (CWI509) tablet * e45c137e7 brcm: Add nvram for the Predia Basic tablet * d52886242 brcm: Add NVRAM for Vamrs 96boards Rock960 * b503c9660 Merge branch 'ath10k-20201023' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main |\ | * 34cb5fce2 ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 | * c0a8efd24 ath11k: IPQ8074 hw2.0: add board-2.bin | * ac7f5e93f ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 | * 2594e510a ath11k: IPQ6018 hw1.0: add board-2.bin * 04f71fe56 cypress: add Cypress firmware and clm_blob files Commit 05b5dc001 and 36f2ea9f7 include updates to other existing files, so they are dropped from this SRU. An additional commit that modifies only WHENCE, commit 0b558e8a7, found when resolving conflicts, were also added. On Jammy, $ debian/scripts/list-lts-update-files jammy kinetic \ ../kinetic/debian.master/abi/fwinfo | \ xargs git log --graph --oneline jammy..kinetic -- * 35f8de521 UBUNTU: Add pre-compiled echoaudio firmware * c954892f6 Add initial AzureWave AW-CM256SM NVRAM file * 86f0c5642 ath10k: WCN3990 hw1.0: add board-2.bin * c3624ebd6 Merge branch 'ath10k-20220423' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main |\ | * 1962cbab3 ath10k: QCA99X0 hw2.0: add board-2.bin | * 0d5e9f7e0 ath11k: WCN6750 hw1.0: add to WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 | * a50132f7f ath11k: WCN6750 hw1.0: add board-2.bin | * 97f8b7563 ath11k: QCN9074 hw1.0: add to WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 | * f56505fe2 ath11k: QCN9074
[Kernel-packages] [Bug 2000133] Please test proposed package
Hello You-Sheng, or anyone else affected, Accepted linux-firmware into jammy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220329.git681281e4-0ubuntu3.10 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- jammy to verification-done-jammy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-jammy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2000133 Title: amdgpu: missing firmware for navi31 Status in HWE Next: New Status in linux-firmware package in Ubuntu: Triaged Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Kinetic: Won't Fix Status in linux-firmware source package in Lunar: Triaged Bug description: [5.232972] amdgpu :03:00.0: Direct firmware load for amdgpu/psp_13_0_0_sos.bin failed with error -2 [5.232974] amdgpu :03:00.0: amdgpu: failed to init sos firmware [5.232975] [drm:psp_sw_init [amdgpu]] *ERROR* Failed to load psp firmware! [5.233097] [drm:amdgpu_device_ip_init [amdgpu]] *ERROR* sw_init of IP block failed -2 [5.233232] amdgpu :03:00.0: amdgpu: amdgpu_device_ip_init failed [5.233233] amdgpu :03:00.0: amdgpu: Fatal error during GPU init [5.233235] amdgpu :03:00.0: amdgpu: amdgpu: finishing device. [5.233459] amdgpu: probe of :03:00.0 failed with error -2 The following new firmware binaries are introduced to linux- firmware.git. 31c57349 amdgpu: add VCN 4.0.0 firmware for amd-5.4 a7351589 amdgpu: add SMU 13.0.0 firmware for amd-5.4 0bef6bb1 amdgpu: Add SDMA 6.0.0 firmware for amd-5.4 bb56d1a7 amdgpu: add PSP 13.0.0 firmware for amd-5.4 e32209f0 amdgpu: add GC 11.0.0 firmware for amd-5.4 613db81f amdgpu: add DCN 3.2.0 firmware for amd-5.4 These are all needed for supporting navi31 dGPU. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu82.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1573 F pulseaudio /dev/snd/controlC1: gdm1573 F pulseaudio CasperMD5CheckResult: pass Dependencies: firmware-sof-signed 2.0-1ubuntu4 [origin: Ubuntu] DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-jammy-amd64-20220504-33+jellyfish+X12 DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2022-08-19 (124 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - somerville-jammy-amd64-20220504-33 MachineType: Intel Corporation Raptor Lake Client Platform Package: linux-firmware PackageArchitecture: all ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.0.0-1009-oem root=UUID=1513ef0d-bc45-444e-906e-d81039e5f411 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 6.0.0-1009.9-oem 6.0.9 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-6.0.0-1009-oem N/A linux-backports-modules-6.0.0-1009-oem N/A linux-firmware 20220329.git681281e4-0ubuntu3.9 Tags: jammy third-party-packages Uname: Linux 6.0.0-1009-oem x86_64 UnreportableReason: This does not seem to be an official Ubuntu package. Please retry after updating the indexes of available packages, if that does not work then remove related third party packages and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 01/29/2022 dmi.bios.vendor: Intel Corporation dmi.bios.version: RPLSFWI1.R00.3047.A00.2201290228 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: RPL-S ADP-S DDR5 UDIMM CRB dmi.board.vendor: Intel Corporation dmi.boa
[Kernel-packages] [Bug 2002601] Re: Wireless: Enable RTL8852BE wifi driver
Hello koba, or anyone else affected, Accepted linux-firmware into jammy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220329.git681281e4-0ubuntu3.10 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- jammy to verification-done-jammy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-jammy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: linux-oem-6.1 (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2002601 Title: Wireless: Enable RTL8852BE wifi driver Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-firmware package in Ubuntu: Fix Released Status in linux-oem-6.1 package in Ubuntu: Invalid Status in linux source package in Jammy: Invalid Status in linux-firmware source package in Jammy: Fix Committed Status in linux-oem-6.1 source package in Jammy: Fix Committed Status in linux source package in Lunar: In Progress Status in linux-firmware source package in Lunar: Fix Released Status in linux-oem-6.1 source package in Lunar: Invalid Bug description: [Justification] Enable Realtek RLT8852BE WIFI. [Test] 1. put rtw8852b_fw.bin in /lib/firmware/rtw89/ 2. boot-up with kernel enabled RTL8852be. 3. Connect to WIFI-AP and test with ping. * ping -I wlp2s0 8.8.8.8 ~~~ PING 8.8.8.8 (8.8.8.8) from 10.102.137.55 wlp2s0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=116 time=5.86 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=116 time=6.21 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=116 time=18.9 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=116 time=6.09 ms 64 bytes from 8.8.8.8: icmp_seq=5 ttl=116 time=6.13 ms 64 bytes from 8.8.8.8: icmp_seq=6 ttl=116 time=5.77 ms ~~~ * Connected to AP ~~~ u@ubuntu:~$ nmcli dev DEVICE TYPE STATE CONNECTION enp3s0 ethernet connected Wired connection 1 wlp2s0 wifi connected Canonical p2p-dev-wlp2s0 wifi-p2p disconnected -- lo loopback unmanaged -- ~~~ * lsmod | grep 8852 ~~~ lsmod | grep 8852 rtw89_8852be 16384 0 rtw89_8852b 368640 1 rtw89_8852be rtw89_pci 61440 1 rtw89_8852be rtw89_core 442368 2 rtw89_8852b,rtw89_pci cfg80211 1081344 3 rtw89_8852b,rtw89_core,mac80211 ~~~ 4. cbd's built result, Lunar, ~~~ remote: Resolving deltas: 100% (391/391), completed with 118 local objects. remote: *** kernel-cbd * remote: * Queueing builds (your 'u_lMstrNxt'); ok to interrupt remote: * For results: ssh cbd ls kobako-lunar-0e58018b43c1-ioeM remote: * 96/480 cores busy (1/5 hosts), 0 builds queued remote: 2023-01-12 03:16:35 kobako-lunar-0e58018b43c1-ioeM/amd64/BUILD-OK remote: 2023-01-12 03:17:47 kobako-lunar-0e58018b43c1-ioeM/arm64/BUILD-OK remote: 2023-01-12 03:11:36 kobako-lunar-0e58018b43c1-ioeM/armhf/BUILD-OK remote: 2023-01-12 03:16:30 kobako-lunar-0e58018b43c1-ioeM/ppc64el/BUILD-OK remote: 2023-01-12 03:10:24 kobako-lunar-0e58018b43c1-ioeM/s390x/BUILD-OK remote: To cbd:lunar.git ~~~ OEM-6.1, remote: Resolving deltas: 100% (399/399), completed with 121 local objects. remote: *** kernel-cbd * remote: * Queueing builds (your 'oem-6.1-next'); ok to interrupt remote: * For results: ssh cbd ls kobako-jammy-c1002f30ccc3-m65z remote: * 0/192 cores busy (0/2 hosts), 0 builds queued remote: 2023-01-12 05:25:23 kobako-jammy-c1002f30ccc3-m65z/amd64/BUILD-OK remote: To cbd:jammy.git [Where problems could occur] Medium, a new driver so the current driver may have some edge cases didn't consider. [Misc] * For generic Jammy, need more patches to enable RTL8852be so only SRU for OEM-6.1. * firmware, dae5d4603b07) rtw89: 8852b: up
[Kernel-packages] [Bug 2003846] Please test proposed package
Hello Timo, or anyone else affected, Accepted linux-firmware into jammy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220329.git681281e4-0ubuntu3.10 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- jammy to verification-done-jammy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-jammy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2003846 Title: amdgpu: missing firmware for navi33 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Kinetic: Won't Fix Bug description: [Impact] AMD Navi33 needs new firmware a1ad1d5b amdgpu: add VCN4.0.4 firmware from amd-5.4 9e01e17c amdgpu: add SMU13.0.7 firmware from amd-5.4 3a50eb85 amdgpu: add SDMA6.0.2 firmware from amd-5.4 19995fb2 amdgpu: add PSP13.0.7 firmware from amd-5.4 32e7c93c amdgpu: add GC11.0.2 firmware from amd-5.4 20c8060e amdgpu: add DCN3.2.1 firmware from amd-5.4 [Test case] Boot a machine with Navi33, check that the firmware is loaded and amdgpu.ko works properly. [Regression potential] these are new files for new hw, so they can't regress older hw To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/2003846/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1999375] Please test proposed package
Hello Timo, or anyone else affected, Accepted linux-firmware into kinetic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/linux- firmware/20220923.gitf09bebf3-0ubuntu1.4 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- kinetic to verification-done-kinetic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-kinetic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1999375 Title: Update dg2_dmc to 2.08 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Kinetic: Fix Committed Bug description: [Impact] i915/dg2 needs this new firmware version to fix some undisclosed bugs [Test case] Boot a system with the new firmware and a kernel that uses it, and check that the correct version is loaded. [Where things could go wrong] If the kernel is updated before the firmware is available, then loading i915 fails as it can't find the firmware it requires. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1999375/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 845137] Re: Second monitor doesn't work on MacBookAir3, 1 with nouveau driver (Experimental 3D support for NVIDIA cards)
** Summary changed: - Second monitor doesn't work on MacBookAir3,1 with noveau driver (Experimental 3D support for NVIDIA cards) + Second monitor doesn't work on MacBookAir3,1 with nouveau driver (Experimental 3D support for NVIDIA cards) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/845137 Title: Second monitor doesn't work on MacBookAir3,1 with nouveau driver (Experimental 3D support for NVIDIA cards) Status in Mactel Support: New Status in linux package in Ubuntu: Fix Released Status in linux source package in Oneiric: Invalid Bug description: When plugging-in an external monitor on my MacBookAir3,1 using a Mini DisplayPort to DVI adapter my system freezes for a few seconds (screen doesn't update, can't type or move mouse, etc.) and the following errors are generated: Sep 8 16:41:55 Rico kernel: [22723.143036] [drm] nouveau :02:00.0: plugged DP-1 Sep 8 16:41:55 Rico kernel: [22723.169853] [drm] nouveau :02:00.0: unplugged DP-1 Sep 8 16:41:56 Rico kernel: [22723.589260] [drm] nouveau :02:00.0: plugged DP-1 Sep 8 16:41:58 Rico kernel: [22725.770323] [drm] nouveau :02:00.0: expected bit 16 == 0, got 0x01114000 Sep 8 16:42:06 Rico kernel: [22733.254017] [drm] nouveau :02:00.0: unplugged DP-1 Sep 8 16:42:06 Rico kernel: [22733.565425] [drm] nouveau :02:00.0: unplugged DP-1 Sep 8 16:42:06 Rico kernel: [22733.986777] [drm] nouveau :02:00.0: plugged DP-1 Sep 8 16:42:08 Rico kernel: [22736.168598] [drm] nouveau :02:00.0: expected bit 16 == 0, got 0x01114000 Sep 8 16:42:18 Rico kernel: [22745.373358] [drm] nouveau :02:00.0: unplugged DP-1 Sep 8 16:42:18 Rico kernel: [22745.688777] [drm] nouveau :02:00.0: unplugged DP-1 Sep 8 16:42:18 Rico kernel: [22746.107852] [drm] nouveau :02:00.0: plugged DP-1 Sep 8 16:42:21 Rico kernel: [22748.289316] [drm] nouveau :02:00.0: expected bit 16 == 0, got 0x01114000 Sep 8 16:42:26 Rico kernel: [22753.406729] [drm] nouveau :02:00.0: unplugged DP-1 For as long as I keep the external monitor plugged-in the intermittent freezes and errors continue. In System Settings -> Displays clicking Detect Displays doesn't detect the external monitor. System recovers and acts normally when I unplug the external monitor. I had been using this monitor just fine daily for months with Natty and the nvidia proprietary drivers. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: libgl1-mesa-dri-experimental 7.11-0ubuntu3 ProcVersionSignature: Ubuntu 3.0.0-10.16-generic 3.0.4 Uname: Linux 3.0.0-10-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: Architecture: amd64 CheckboxSubmission: 15c9c9b122c9273f52b28c9a5df794ac CheckboxSystem: 7e42599bda39ea7ff8b528272b6ef52b CompizPlugins: [core,bailer,detection,composite,opengl,decor,mousepoll,vpswitch,regex,animation,snap,expo,move,compiztoolbox,place,grid,imgpng,gnomecompat,wall,ezoom,workarounds,resize,fade,unitymtgrabhandles,scale,session,unityshell] CompositorRunning: compiz Date: Thu Sep 8 16:38:44 2011 DistUpgraded: Log time: 2011-09-07 17:56:12.528248 DistroCodename: oneiric DistroVariant: ubuntu DkmsStatus: bcmwl, 5.100.82.38+bdcom, 3.0.0-10-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu GraphicsCard: nVidia Corporation Device [10de:08a2] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Apple Computer Inc. Device [106b:00d4] InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64+mac (20110901) MachineType: Apple Inc. MacBookAir3,1 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-10-generic root=UUID=f1ecb7d8-5574-470d-b78e-030315e3a87a ro quiet splash reboot=pci acpi_backlight=vendor vt.handoff=7 SourcePackage: mesa UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', '-f'] failed with exit code -11: UpgradeStatus: Upgraded to oneiric on 2011-09-08 (0 days ago) dmi.bios.date: 11/18/10 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA31.88Z.0061.B01.1011181342 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-942452F5819B1C1B dmi.board.vendor: Apple Inc. dmi.board.version: 1.0 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-942452F5819B1C1B dmi.modalias: dmi:bvnAppleInc.:bvrMBA31.88Z.0061.B01.1011181342:bd11/18/10:svnAppleInc.:pnMacBookAir3,1:pvr1.0:rvnAppleInc.:rnMac-942452F5819B1C1B:rvr1.0:cvnAppleInc.:ct10:cvrMac-942452F5819B1C1B: dmi.product.name: MacBookAir3,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.5.92+bzr2791-0ubuntu2 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.26-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 7.11-0ubuntu3 version.libgl1-mesa-dri-experimental: lib
Re: [Kernel-packages] [Bug 1978416] Re: External USB webcam is not working
Update: It was the issue with the webcam firmware, I contacted Hikvision and they were not able to fix it. I returned it and bought different webcam from Logitech. On Thu, 26 Jan, 2023, 1:40 PM Isuru, <1978...@bugs.launchpad.net> wrote: > This happened to me on 18.04 and 20.04 both. I am seeing similar logs to > the previous comments and one major problem is that the laptop would not > even boot up if the webcam is plugged in. It gets stuck at boot time and > until I remove the webcam, it keeps stuck in the same black screen. > > If I keep it plugged and it doesn't respond, the entire system gets > stuck until I remove it. > > I am using the a Hikvision U12 Full HD 1080P USB Webcam > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1978416 > > Title: > External USB webcam is not working > > Status in linux-signed-hwe-5.13 package in Ubuntu: > Confirmed > > Bug description: > Hello, I'm trying to connect Hikvision DS-U02 USB Webcam. It worked > for once after trying multiple times, then it stopped working again. > It worked when I connected it to a USB 2.0 port and now it's not > working there as well. The device is showing up in lsbsb and dmseg, > but not showing in "v4l2-ctl --list-devices". > > error in dmesg: > [10856.771936] usb 3-4: new high-speed USB device number 13 using > xhci_hcd > [10856.929763] usb 3-4: New USB device found, idVendor=2bdf, > idProduct=0280, bcdDevice=50.00 > [10856.929772] usb 3-4: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [10856.929776] usb 3-4: Product: 1080P Web Camera > [10856.929779] usb 3-4: Manufacturer: SN0002 > [10856.929781] usb 3-4: SerialNumber: SN0002 > [10856.930669] usb 3-4: Found UVC 1.00 device 1080P Web Camera > (2bdf:0280) > [10856.932435] uvcvideo 3-4:1.1: Failed to query (129) UVC probe control > : -32 (exp. 26). > [10856.932447] uvcvideo 3-4:1.1: Failed to initialize the device (-5). > > ProblemType: Bug > DistroRelease: Ubuntu 20.04 > Package: linux-image-5.13.0-48-generic 5.13.0-48.54~20.04.1 > ProcVersionSignature: Ubuntu 5.13.0-48.54~20.04.1-generic 5.13.19 > Uname: Linux 5.13.0-48-generic x86_64 > NonfreeKernelModules: wl > ApportVersion: 2.20.11-0ubuntu27.24 > Architecture: amd64 > CasperMD5CheckResult: skip > CurrentDesktop: ubuntu:GNOME > Date: Sun Jun 12 23:40:45 2022 > InstallationDate: Installed on 2020-09-07 (643 days ago) > InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 > (20200423) > SourcePackage: linux-signed-hwe-5.13 > UpgradeStatus: No upgrade log present (probably fresh install) > > To manage notifications about this bug go to: > > https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.13/+bug/1978416/+subscriptions > > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-signed-hwe-5.13 in Ubuntu. https://bugs.launchpad.net/bugs/1978416 Title: External USB webcam is not working Status in linux-signed-hwe-5.13 package in Ubuntu: Confirmed Bug description: Hello, I'm trying to connect Hikvision DS-U02 USB Webcam. It worked for once after trying multiple times, then it stopped working again. It worked when I connected it to a USB 2.0 port and now it's not working there as well. The device is showing up in lsbsb and dmseg, but not showing in "v4l2-ctl --list-devices". error in dmesg: [10856.771936] usb 3-4: new high-speed USB device number 13 using xhci_hcd [10856.929763] usb 3-4: New USB device found, idVendor=2bdf, idProduct=0280, bcdDevice=50.00 [10856.929772] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10856.929776] usb 3-4: Product: 1080P Web Camera [10856.929779] usb 3-4: Manufacturer: SN0002 [10856.929781] usb 3-4: SerialNumber: SN0002 [10856.930669] usb 3-4: Found UVC 1.00 device 1080P Web Camera (2bdf:0280) [10856.932435] uvcvideo 3-4:1.1: Failed to query (129) UVC probe control : -32 (exp. 26). [10856.932447] uvcvideo 3-4:1.1: Failed to initialize the device (-5). ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.13.0-48-generic 5.13.0-48.54~20.04.1 ProcVersionSignature: Ubuntu 5.13.0-48.54~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-48-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27.24 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sun Jun 12 23:40:45 2022 InstallationDate: Installed on 2020-09-07 (643 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: linux-signed-hwe-5.13 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.13/+bug/1978416/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.lau
[Kernel-packages] [Bug 2003936] [NEW] curl peer disconnects inside lxd container
Public bug reported: Repro steos I have an (intermittent) issue when running curl/git inside an lxd container, the command always will interrupt with some kind of error due to peer disconnect e.g. "curl: (56) OpenSSL SSL_read: Connection reset by peer, errno 104". Outside the lxd container i.e. on ubuntu machine itself the same resource download without a problem. ``` # install and configure a virtual machine with ubuntu and configure it with bridged network, then install lxd on the vm with default configuration i.e. install network bridge lxdbr0 and run curl command. sudo snap install lxd sudo lxd init sudo lxc launch images:ubuntu/focal wired-bluejay sudo lxc exec wired-bluejay -- curl -o dart-sdk-linux-x64.zip https://storage.googleapis.com/flutter_infra_release/flutter/472e34cbbcd461c748973e7e735558ab200d4f5e/dart-sdk-linux-x64.zip ``` ``` % Total% Received % Xferd Average Speed TimeTime Time Current Dload Upload Total SpentLeft Speed 8 246M8 20.8M0 0 2780k 0 0:01:30 0:00:07 0:01:23 2951k curl: (56) OpenSSL SSL_read: Connection reset by peer, errno 104 ``` Additional information: I discovered the issue under an wsl installation of ubuntu. Initially I wasn't able reproduce with on an virtual machine (fresh ubuntu 22.10), but recently discovered I *can* reproduce the behavior when the network adapter on the vm (virtualbox) is switched to bridged. Identical behavior manifests. I stated above the issue is intermittent, with wsl I observed that only in two out of three networks the undesired behavior manifested. The networks are provided by the same internet service provider with same router models and assumed same network configuration. I reported the bugs prior to other places: - https://github.com/microsoft/WSL/issues/9427 - https://discuss.linuxcontainers.org/t/curl-git-dont-work-properly-inside-an-lxd-container-on-wsl-ubuntu-instance-and-disconnects-frequently/16036/3 ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/2003936 Title: curl peer disconnects inside lxd container Status in linux-meta package in Ubuntu: New Bug description: Repro steos I have an (intermittent) issue when running curl/git inside an lxd container, the command always will interrupt with some kind of error due to peer disconnect e.g. "curl: (56) OpenSSL SSL_read: Connection reset by peer, errno 104". Outside the lxd container i.e. on ubuntu machine itself the same resource download without a problem. ``` # install and configure a virtual machine with ubuntu and configure it with bridged network, then install lxd on the vm with default configuration i.e. install network bridge lxdbr0 and run curl command. sudo snap install lxd sudo lxd init sudo lxc launch images:ubuntu/focal wired-bluejay sudo lxc exec wired-bluejay -- curl -o dart-sdk-linux-x64.zip https://storage.googleapis.com/flutter_infra_release/flutter/472e34cbbcd461c748973e7e735558ab200d4f5e/dart-sdk-linux-x64.zip ``` ``` % Total% Received % Xferd Average Speed TimeTime Time Current Dload Upload Total SpentLeft Speed 8 246M8 20.8M0 0 2780k 0 0:01:30 0:00:07 0:01:23 2951k curl: (56) OpenSSL SSL_read: Connection reset by peer, errno 104 ``` Additional information: I discovered the issue under an wsl installation of ubuntu. Initially I wasn't able reproduce with on an virtual machine (fresh ubuntu 22.10), but recently discovered I *can* reproduce the behavior when the network adapter on the vm (virtualbox) is switched to bridged. Identical behavior manifests. I stated above the issue is intermittent, with wsl I observed that only in two out of three networks the undesired behavior manifested. The networks are provided by the same internet service provider with same router models and assumed same network configuration. I reported the bugs prior to other places: - https://github.com/microsoft/WSL/issues/9427 - https://discuss.linuxcontainers.org/t/curl-git-dont-work-properly-inside-an-lxd-container-on-wsl-ubuntu-instance-and-disconnects-frequently/16036/3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/2003936/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1978416] Re: External USB webcam is not working
This happened to me on 18.04 and 20.04 both. I am seeing similar logs to the previous comments and one major problem is that the laptop would not even boot up if the webcam is plugged in. It gets stuck at boot time and until I remove the webcam, it keeps stuck in the same black screen. If I keep it plugged and it doesn't respond, the entire system gets stuck until I remove it. I am using the a Hikvision U12 Full HD 1080P USB Webcam -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-signed-hwe-5.13 in Ubuntu. https://bugs.launchpad.net/bugs/1978416 Title: External USB webcam is not working Status in linux-signed-hwe-5.13 package in Ubuntu: Confirmed Bug description: Hello, I'm trying to connect Hikvision DS-U02 USB Webcam. It worked for once after trying multiple times, then it stopped working again. It worked when I connected it to a USB 2.0 port and now it's not working there as well. The device is showing up in lsbsb and dmseg, but not showing in "v4l2-ctl --list-devices". error in dmesg: [10856.771936] usb 3-4: new high-speed USB device number 13 using xhci_hcd [10856.929763] usb 3-4: New USB device found, idVendor=2bdf, idProduct=0280, bcdDevice=50.00 [10856.929772] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10856.929776] usb 3-4: Product: 1080P Web Camera [10856.929779] usb 3-4: Manufacturer: SN0002 [10856.929781] usb 3-4: SerialNumber: SN0002 [10856.930669] usb 3-4: Found UVC 1.00 device 1080P Web Camera (2bdf:0280) [10856.932435] uvcvideo 3-4:1.1: Failed to query (129) UVC probe control : -32 (exp. 26). [10856.932447] uvcvideo 3-4:1.1: Failed to initialize the device (-5). ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.13.0-48-generic 5.13.0-48.54~20.04.1 ProcVersionSignature: Ubuntu 5.13.0-48.54~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-48-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27.24 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sun Jun 12 23:40:45 2022 InstallationDate: Installed on 2020-09-07 (643 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: linux-signed-hwe-5.13 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.13/+bug/1978416/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2003846] Re: amdgpu: missing firmware for navi33
** Changed in: linux-firmware (Ubuntu Jammy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2003846 Title: amdgpu: missing firmware for navi33 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-firmware source package in Kinetic: Won't Fix Bug description: [Impact] AMD Navi33 needs new firmware a1ad1d5b amdgpu: add VCN4.0.4 firmware from amd-5.4 9e01e17c amdgpu: add SMU13.0.7 firmware from amd-5.4 3a50eb85 amdgpu: add SDMA6.0.2 firmware from amd-5.4 19995fb2 amdgpu: add PSP13.0.7 firmware from amd-5.4 32e7c93c amdgpu: add GC11.0.2 firmware from amd-5.4 20c8060e amdgpu: add DCN3.2.1 firmware from amd-5.4 [Test case] Boot a machine with Navi33, check that the firmware is loaded and amdgpu.ko works properly. [Regression potential] these are new files for new hw, so they can't regress older hw To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/2003846/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
