[Kernel-packages] [Bug 1112751] Re: DHCP over wireless stopped working

2014-04-19 Thread Chris Thompson 
Failure to receive DHCP response also occurs with Ubuntu 13.10, 14.04 on
HP Folio 13 (which uses broadcom BCM4313).

Using the open source driver is not viable as the signal level is very
weak.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1112751

Title:
  DHCP over wireless stopped working

Status in “bcmwl” package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  I have a Dell Vostro 3700 notebook running Ubuntu 12.04.1 LTS and a Netgear 
FWG114P WLAN router which I bought 2005.
  Since the update on Sunday 27. January 2013 the NetworkManager fails to 
connect to my WLAN Router.

  The Indicator applet shows all available wireless networks, but the
  NetworkManager fails to establish the connection. Due to the fact that
  I see the available networks I think the WLAN driver itself works
  fine. It seems to be a DHCP problem, but I have no idead how to solve
  it.

  If I boot from an Ubuntu 12.04 USB stick which I created about 1 year
  ago WLAN works fine. Thus it's not a hardware problem.

  Please could you give me some hints how to solve this problem.

  Thanks & Best regards,

  Franz Hollerer

  # /sbin/ifconfig 
  eth0  Link encap:Ethernet  HWaddr f0:4d:a2:87:90:5a  
inet addr:192.168.0.7  Bcast:192.168.0.255  Mask:255.255.255.0
inet6 addr: fe80::f24d:a2ff:fe87:905a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
RX packets:2032 errors:0 dropped:0 overruns:0 frame:0
TX packets:1793 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000 
RX bytes:1465900 (1.4 MB)  TX bytes:249876 (249.8 KB)
Interrupt:47 Base address:0x6000 

  eth1  Link encap:Ethernet  HWaddr 5c:ac:4c:7e:c4:0f  
inet6 addr: fe80::5eac:4cff:fe7e:c40f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:22 errors:2 dropped:0 overruns:0 frame:3780
TX packets:300 errors:141 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000 
RX bytes:3602 (3.6 KB)  TX bytes:66602 (66.6 KB)
Interrupt:17
   
  # iwconfig
  lono wireless extensions.

  eth1  IEEE 802.11abg  ESSID:"Catopsis"  
Mode:Managed  Frequency:2.432 GHz  Access Point: 00:0F:B5:51:94:4A  
 
Bit Rate=54 Mb/s   Tx-Power=200 dBm   
Retry  long limit:7   RTS thr:off   Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=70/70  Signal level=-21 dBm  
Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
Tx excessive retries:0  Invalid misc:0   Missed beacon:0

  eth0  no wireless extensions.
  loLink encap:Local Loopback  
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:392 errors:0 dropped:0 overruns:0 frame:0
TX packets:392 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0 
RX bytes:33528 (33.5 KB)  TX bytes:33528 (33.5 KB)

  Excerpt from dmsg:
  [   11.517377] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 
6.20.155.1 (r326264)

  Excerpt from /var/log/syslog:

  avahi-daemon[945]: Joining mDNS multicast group on interface eth1.IPv6 with 
address fe80::5eac:4cff:fe7e:c40f.
  avahi-daemon[945]: New relevant interface eth1.IPv6 for mDNS.
  avahi-daemon[945]: Registering new address record for 
fe80::5eac:4cff:fe7e:c40f on eth1.*.
  NetworkManager[948]:  Auto-activating connection 'Catopsis'.
  NetworkManager[948]:  Activation (eth1) starting connection 'Catopsis'
  NetworkManager[948]:  (eth1): device state change: disconnected -> 
prepare (reason 'none') [30 40 0]
  NetworkManager[948]:  Activation (eth1) Stage 1 of 5 (Device Prepare) 
scheduled...
  NetworkManager[948]:  Activation (eth1) Stage 1 of 5 (Device Prepare) 
started...
  NetworkManager[948]:  Activation (eth1) Stage 2 of 5 (Device Configure) 
scheduled...
  NetworkManager[948]:  Activation (eth1) Stage 1 of 5 (Device Prepare) 
complete.
  NetworkManager[948]:  Activation (eth1) Stage 2 of 5 (Device Configure) 
starting...
  NetworkManager[948]:  (eth1): device state change: prepare -> config 
(reason 'none') [40 50 0]
  NetworkManager[948]:  Activation (eth1/wireless): access point 
'Catopsis' has security, but secrets are required.
  NetworkManager[948]:  (eth1): device state change: config -> need-auth 
(reason 'none') [50 60 0]
  NetworkManager[948]:  Activation (eth1) Stage 2 of 5 (Device Configure) 
complete.
  NetworkManager[948]:  Activation (eth1) Stage 1 of 5 (Device Prepare) 
scheduled...
  NetworkManager[948]:  Activation (eth1) Stage 1 of 5 (Device Prepare) 
started...
  NetworkManager[948]:  (eth1): device state change: need-auth -> prepar

[Kernel-packages] [Bug 1010926] Re: HP Folio 13: Lid close event is never fired => no suspend on lid close

2014-03-31 Thread Chris Thompson 
If it had indeed gone away (it was still present for me in 13.10), it
has returned in 14.04 beta2.

Machine is an HP Folio 13. 
$ uname -a
Linux HP-Notebook 3.13.0-20-generic #42-Ubuntu SMP Fri Mar 28 09:57:00 UTC 2014 
i686 i686 i686 GNU/Linux

Same behaviour as reported JThoennes, gpothier

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1010926

Title:
  HP Folio 13: Lid close event is never fired => no suspend on lid close

Status in “linux” package in Ubuntu:
  Fix Released

Bug description:
  The machine is an HP Folio 13 notebook.
  The state of the lid is correctly reported in /proc:

  With lid open:
  gpothier@tadzim2:~$ cat /proc/acpi/button/lid/*/state
  state:  open

  With lid closed:
  gpothier@tadzim2:~$ cat /proc/acpi/button/lid/*/state
  state:  closed

  The events are never fired however. This is the output of acpi_listen
  after hitting the power button (just to check that some acpi events
  are indeed fired):

  gpothier@tadzim2:~$ acpi_listen 
  button/power PWRF 0080 0001
  video GFX0 0080 
  button/lid LID0 0080 0001

  But when closing/opening the lid, nothing happens. This prevents the
  suspend on lid close feature to work.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-24-generic 3.2.0-24.39
  ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16
  Uname: Linux 3.2.0-24-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', 
'/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D3p', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xc270 irq 50'
 Mixer name : 'Intel CougarPoint HDMI'
 Components : 'HDA:111d76e5,103c17f8,00100102 
HDA:80862805,80860101,0010'
 Controls  : 22
 Simple ctrls  : 10
  Date: Sat Jun  9 11:45:19 2012
  HibernationDevice: RESUME=UUID=cb1ceaaa-6de7-42c5-a842-50edef2af7c3
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  MachineType: Hewlett-Packard HP Folio 13 Notebook PCC
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic 
root=UUID=acdbf868-560a-4ec7-8772-45c16c166819 ro acpi_backlight=vendor quiet 
splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-24-generic N/A
   linux-backports-modules-3.2.0-24-generic  N/A
   linux-firmware1.79
  SourcePackage: linux
  StagingDrivers: rts_pstor mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/05/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.06
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 17F8
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 46.34
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.06:bd03/05/2012:svnHewlett-Packard:pnHPFolio13NotebookPCC:pvr068C10204A0320100:rvnHewlett-Packard:rn17F8:rvr46.34:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Folio 13 Notebook PCC
  dmi.product.version: 068C10204A0320100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1010926/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp