[Kernel-packages] [Bug 1685442] Re: Errors: flip_done timed out during boot-up; slow boot
** Also affects: linux (Baltix) Importance: Undecided Status: New ** This bug is no longer a duplicate of bug 1542939 system freeze after vt switching ** Changed in: linux (Baltix) Status: New => In Progress ** Changed in: linux (Baltix) Importance: Undecided => High ** Changed in: linux (Baltix) Assignee: (unassigned) => Mantas Kriaučiūnas (mantas) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1685442 Title: Errors: flip_done timed out during boot-up; slow boot Status in Linux: Fix Released Status in linux package in Ubuntu: Confirmed Status in linux package in Baltix: In Progress Bug description: I had been running Ubuntu 16.04 LTS on many laptop computers (especially Dell D620, D630, E6400) with no problem. I created a Live USB with Ubuntu 16.04.2 LTS and tried it on a Dell D630. It was very slow to boot up (about 90 seconds) as opposed to the 30-45 seconds it usually takes. For a few seconds there were error messages that included the phrase "flip_done timed out". When the Ubuntu desktop appeared, the mouse cursor hung for a while, but then came back to life. I didn't do much testing from there. I did a Live session with the 16.04.2 LTS on a different D630 laptop, and the same problem occureed. I Googled the problem, and found several hits. - On an Arch forum, someone reported the problem on a Dell D630, like mine. It also occured on other laptops: https://bbs.archlinux.org/viewtopic.php?id=218581 The suggestion was that the bug was related to kernel version 4.8.x and the 965GM chipset, which is what the D630 has. So I tried Ubuntu Mate 16.04.2 on a Dell D620 (with a 945GM chipset) and the problem DID NOT occur. --- For a similar boot-up problem, Ubuntu Forum suggested going back to an earlier version of Ubuntu. https://ubuntuforums.org/showthread.php?t=2348892 I tried Ubuntu Mate 16.04.1 (with the 4.4.0-31-generic kernel), and the problem did NOT occur. So I'm solving the problem for myself by using Ubuntu Mate 16.04.1 LTS rather than 16.04.2. --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: test 2194 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=a754e82c-72cb-44d1-9fa4-58777803b24d InstallationDate: Installed on 2017-07-19 (0 days ago) InstallationMedia: Ubuntu-MATE 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: Dell Inc. Latitude D630 Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-36-generic root=UUID=2a3b3861-8ac7-41e0-86cf-999434bd112e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.8.0-36-generic N/A linux-backports-modules-4.8.0-36-generic N/A linux-firmware1.157.8 Tags: xenial Uname: Linux 4.8.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/04/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A19 dmi.board.name: 0KU184 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA19:bd06/04/2013:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn0KU184:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: test 2194 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=a754e82c-72cb-44d1-9fa4-58777803b24d InstallationDate: Installed on 2017-07-19 (0 days ago) InstallationMedia: Ubuntu-MATE 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: Dell Inc. Latitude D630 Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-36-generic root=UUID=2a3b3861-8ac7-41e0-86cf-999434bd1
[Kernel-packages] [Bug 1958518] Re: split some large, lesser-used firmware files into -extra package
This issue is solved in Debian a long time ago: metapackage https://packages.debian.org/sid/firmware-linux depends on small firmware-linux-free package and firmware-linux-nonfree metapackage metapackage https://packages.debian.org/sid/firmware-linux-nonfree depends on most useful "nonfree" firmware, including this pretty firmware-misc-nonfree package (takes only ~40 MB after installation, instead of ~900MB sizes of Ubuntu's linux-firmware): https://packages.debian.org/sid/firmware-misc-nonfree Btw, netronome firmware is packaged separately in Debian, as you wish, see https://packages.debian.org/sid/firmware-netronome Someone from Ubuntu developers decided simply put all useful and almost not used firmware into huge package, which is updated very often and this causes a lot of problems for users, especially who uses SSD storage or slow internet connection :( -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1958518 Title: split some large, lesser-used firmware files into -extra package Status in linux-firmware package in Ubuntu: Confirmed Status in linux-firmware source package in Jammy: Confirmed Bug description: The linux-image-generic package depends on linux-firmware which is over half a gigabyte in size installed. I will assume that quite many people do not have netronome hardware which weighs in at almost 150MB of that. I kindly suggest to put such large firmware for less common hardware into its own linux-firmware-extra package which would be recommended by linux-firmare. Comments? I'm willing to help with the packaging provided that the changes have a chance to land. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1958518/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1685442] Re: Errors: flip_done timed out during boot-up; slow boot
** Changed in: linux (Baltix) Milestone: None => baltix-18.04 ** Changed in: linux (Baltix) Importance: High => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1685442 Title: Errors: flip_done timed out during boot-up; slow boot Status in Linux: Fix Released Status in linux package in Ubuntu: Confirmed Status in linux package in Baltix: In Progress Bug description: I had been running Ubuntu 16.04 LTS on many laptop computers (especially Dell D620, D630, E6400) with no problem. I created a Live USB with Ubuntu 16.04.2 LTS and tried it on a Dell D630. It was very slow to boot up (about 90 seconds) as opposed to the 30-45 seconds it usually takes. For a few seconds there were error messages that included the phrase "flip_done timed out". When the Ubuntu desktop appeared, the mouse cursor hung for a while, but then came back to life. I didn't do much testing from there. I did a Live session with the 16.04.2 LTS on a different D630 laptop, and the same problem occureed. I Googled the problem, and found several hits. - On an Arch forum, someone reported the problem on a Dell D630, like mine. It also occured on other laptops: https://bbs.archlinux.org/viewtopic.php?id=218581 The suggestion was that the bug was related to kernel version 4.8.x and the 965GM chipset, which is what the D630 has. So I tried Ubuntu Mate 16.04.2 on a Dell D620 (with a 945GM chipset) and the problem DID NOT occur. --- For a similar boot-up problem, Ubuntu Forum suggested going back to an earlier version of Ubuntu. https://ubuntuforums.org/showthread.php?t=2348892 I tried Ubuntu Mate 16.04.1 (with the 4.4.0-31-generic kernel), and the problem did NOT occur. So I'm solving the problem for myself by using Ubuntu Mate 16.04.1 LTS rather than 16.04.2. --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: test 2194 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=a754e82c-72cb-44d1-9fa4-58777803b24d InstallationDate: Installed on 2017-07-19 (0 days ago) InstallationMedia: Ubuntu-MATE 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: Dell Inc. Latitude D630 Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-36-generic root=UUID=2a3b3861-8ac7-41e0-86cf-999434bd112e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.8.0-36-generic N/A linux-backports-modules-4.8.0-36-generic N/A linux-firmware1.157.8 Tags: xenial Uname: Linux 4.8.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/04/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A19 dmi.board.name: 0KU184 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA19:bd06/04/2013:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn0KU184:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: test 2194 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=a754e82c-72cb-44d1-9fa4-58777803b24d InstallationDate: Installed on 2017-07-19 (0 days ago) InstallationMedia: Ubuntu-MATE 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: Dell Inc. Latitude D630 Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-36-generic root=UUID=2a3b3861-8ac7-41e0-86cf-999434bd112e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restri
[Kernel-packages] [Bug 1685442] Re: Errors: flip_done timed out during boot-up; slow boot
** Tags added: bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1685442 Title: Errors: flip_done timed out during boot-up; slow boot Status in Linux: Fix Released Status in linux package in Ubuntu: Confirmed Status in linux package in Baltix: In Progress Bug description: I had been running Ubuntu 16.04 LTS on many laptop computers (especially Dell D620, D630, E6400) with no problem. I created a Live USB with Ubuntu 16.04.2 LTS and tried it on a Dell D630. It was very slow to boot up (about 90 seconds) as opposed to the 30-45 seconds it usually takes. For a few seconds there were error messages that included the phrase "flip_done timed out". When the Ubuntu desktop appeared, the mouse cursor hung for a while, but then came back to life. I didn't do much testing from there. I did a Live session with the 16.04.2 LTS on a different D630 laptop, and the same problem occureed. I Googled the problem, and found several hits. - On an Arch forum, someone reported the problem on a Dell D630, like mine. It also occured on other laptops: https://bbs.archlinux.org/viewtopic.php?id=218581 The suggestion was that the bug was related to kernel version 4.8.x and the 965GM chipset, which is what the D630 has. So I tried Ubuntu Mate 16.04.2 on a Dell D620 (with a 945GM chipset) and the problem DID NOT occur. --- For a similar boot-up problem, Ubuntu Forum suggested going back to an earlier version of Ubuntu. https://ubuntuforums.org/showthread.php?t=2348892 I tried Ubuntu Mate 16.04.1 (with the 4.4.0-31-generic kernel), and the problem did NOT occur. So I'm solving the problem for myself by using Ubuntu Mate 16.04.1 LTS rather than 16.04.2. --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: test 2194 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=a754e82c-72cb-44d1-9fa4-58777803b24d InstallationDate: Installed on 2017-07-19 (0 days ago) InstallationMedia: Ubuntu-MATE 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: Dell Inc. Latitude D630 Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-36-generic root=UUID=2a3b3861-8ac7-41e0-86cf-999434bd112e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.8.0-36-generic N/A linux-backports-modules-4.8.0-36-generic N/A linux-firmware1.157.8 Tags: xenial Uname: Linux 4.8.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/04/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A19 dmi.board.name: 0KU184 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA19:bd06/04/2013:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn0KU184:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: test 2194 F pulseaudio DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=a754e82c-72cb-44d1-9fa4-58777803b24d InstallationDate: Installed on 2017-07-19 (0 days ago) InstallationMedia: Ubuntu-MATE 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: Dell Inc. Latitude D630 Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.8.0-36-generic root=UUID=2a3b3861-8ac7-41e0-86cf-999434bd112e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.8.0-36-generic N/A linux-backports-modules-4.8.0-36-generic N/A linux-firmware
[Kernel-packages] [Bug 1967858] Re: Make arch specific linux-firmware
@juergh maybe it would be better simply reuse debian packaging practice for linux-firmware? Please also look at LP bug #1958518 - this issue is solved in Debian a long time ago: metapackage https://packages.debian.org/sid/firmware-linux depends on small firmware-linux-free package and firmware-linux-nonfree metapackage metapackage https://packages.debian.org/sid/firmware-linux-nonfree depends on most useful "nonfree" firmware, including this pretty firmware-misc-nonfree package (takes only ~40 MB after installation, instead of ~900MB sized of Ubuntu's linux-firmware): https://packages.debian.org/sid/firmware-misc-nonfree For example netronome network adapters firmware is packaged separately in Debian, see https://packages.debian.org/sid/firmware-netronome Someone from Ubuntu developers decided simply put all useful and almost not used firmware into huge package, which is updated very often and this causes a lot of problems for users, especially who uses SSD storage or slow internet connection :( For example see bug #1972806 - simple change of some device firmware (few kilobytes size) requires to download ~250MB linux-firmware package for *every* Ubuntu user. This is a nonsense and waste of bandwidth and other resources. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1967858 Title: Make arch specific linux-firmware Status in linux-firmware package in Ubuntu: In Progress Status in linux-firmware source package in Mantic: In Progress Bug description: There are many kernel modules that only exist on some architectures. Yet linux-firmware is an arch:all package that ships firmware for all drivers, for all architectures. For example, it is pointless to ship many Intel firmware on non-x86 machines. At the same time it is pointless to ship many Qualcomm firmware on non-arm machines. Or shipping nvidia firmware on architectures that have no Nvidia drivers. Or shipping wifi firmware on IBM Z / PowerPC. It seems like we should build-depend on linux / linux-oem kernels and only install relevant firmware files on relevant architectures only. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1967858/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1696541] Re: orangefs kernel module not compiled for amd64, i386
Should I report another bug for enabling CONFIG_ORANGEFS_FS=m in Zesty, Yakkety and Xenial LTS kernel packages? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1696541 Title: orangefs kernel module not compiled for amd64, i386 Status in linux package in Ubuntu: Fix Released Status in linux source package in Artful: Fix Released Bug description: The OrangeFS kernel module (/lib/modules//kernel/fs/orangefs/orangefs.ko) has been available as part of the Linux kernel since version 4.6, but has not been compiled as part of the ubuntu kernel-image package or any other package for the amd64 and i386 architectures. According to Ubuntu Package Search, it is being compiled for the arm64, armhf, and powerpc architectures. This bug report is to add support for OrangeFS by compiling the orangefs module and including it with the all kernel packages >= 4.6. This can be done by enabling CONFIG_ORANGEFS_FS as a module in the kernel config file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1696541/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1707810] Re: regression on udev rules for HUAWEI mobile broadband?
I've backported usb-modeswitch 2.4 and usb-modeswich-data 2017-01 from Ubuntu 17.04 (Zesty) to 16.04 LTS (Xenial), you can update packages from ppa:baltix-members , see https://launchpad.net/~baltix-members/+archive Please reboot after installing usb-modeswitch 2.4 and usb-modeswich-data 2017-01 from ppa:baltix-members , test if your USB modem works correctly with updated packages and write a comment here in any case (works or not). Thanks, Mantas Kriaučiūnas Developer of Baltix GNU/Linux Ubuntu derivative -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1707810 Title: regression on udev rules for HUAWEI mobile broadband? Status in linux package in Ubuntu: Incomplete Status in usb-modeswitch-data package in Ubuntu: New Bug description: I found several bug reports about mobile broadband USB sticks not working on Ubuntu 16.04. It seems that all the low level support is in place but the udev rules are incomplete, in what could be a regression from previous versions. --- 16.04 - ATTRS{idVendor}=="12d1", ATTRS{manufacturer}!="Android", ATTR{bInterfaceNumber}=="00", ATTR{bInterfaceClass}=="08", RUN+="usb_modeswitch '%b/%k'" ATTR{idVendor}=="12d1", ATTR{idProduct}=="1573", RUN+="usb_modeswitch '%b/%k'" --- 12.04 - ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1001", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1003", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1009", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="101e", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1030", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1031", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1414", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1446", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1449", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14ad", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14b5", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14b7", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14c1", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14c4", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14c5", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14d1", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14fe", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1505", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1520", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1521", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1523", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1553", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1557", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1d50", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1da1", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1f01", RUN+="usb_modeswitch '%b/%k'" ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="380b", RUN+="usb_modeswitch '%b/%k'" For example the HUAWEI device with vendor:product pair 12d1:1f01 (see #1527914 ) worked fine (plug and play) on Ubuntu 12.04 but appears as as mass storage device on Ubuntu 16.04. The missing rule is simply: ATTRS{idVendor}=="12d1", ATTR{idProduct}=="1f01", RUN+="usb_modeswitch '%b/%k'" References: #1431179 #1527914 #1514231 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1707810/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1247712] Re: Unable to install Broadcom STA wireless dirver on 3.8 / 3.11 kernel via jockey-gtk
** Also affects: bcmwl (Baltix) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1247712 Title: Unable to install Broadcom STA wireless dirver on 3.8 / 3.11 kernel via jockey-gtk Status in Jockey driver manager: Invalid Status in “bcmwl” package in Ubuntu: Confirmed Status in “jockey” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Confirmed Status in “bcmwl” source package in Precise: Confirmed Status in “jockey” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: Confirmed Status in “bcmwl” package in Baltix: New Bug description: SRU request: Please accept jockey_0.9.7-0ubuntu7.15 into precise-proposed. [Impact] Kernel versions higher than 3.8 fail to rebind the Broadcom device to the driver thus compromising system stability. While rebinding is a nice feature it can't come at the cost of system stability. For this reason we'll disable this feature when dealing with Linux >= 3.8 and preserve it in the other cases. [Test Case] Install and reboot into Linux 3.8 or higher (linux-lts-saucy or linux- lts-trusty), then use Jockey to install the broadcom wireless driver. Jockey will hang and the system will probably hang on shutdown. [Regression Potential] It should be minimal i.e. there won't be device rebinding on the livecd. This, however, shouldn't be an issue since the open broadcom driver should already work out of the box. Furthermore the test suite now covers this test case. == Description == CID: 201303-13027 Dell Inspiron 5535 CID: 201012-6925 Dell Latitude E6320 CID: 201208-11536 Dell Latitude 6430u Affected chipsets: Broadcom 4365 Broadcom 4313 [14e4:4727] (rev 01) Broadcom 43132 The bcmwl (6.20.155.1+bdcom-0ubuntu0.0.2) cannot be installed on 12.04.4 (3.11.0-15), 12.04.3 (3.8.0-29) Steps: 1. Install Ubuntu 12.04.3 (or 12.04.4) + update 2. Boot to desktop 3. Install the Broadcom STA wireless driver via jockey-gtk Driver cannot be installed, jockey-gtk will stuck at "Downloading and installing driver" The last message from jockey.jog is: unbind/rebind on driver /sys/module/wl/drivers/pci:wl: device :02:00.0 Error message could be found in dmesg: Nov 3 21:34:14 201012-6925 kernel: [ 528.104653] wlc_lcnphy_rx_gain_tbl_free_entry = 5 Nov 3 21:34:14 201012-6925 kernel: [ 528.104863] BUG: unable to handle kernel paging request at a045d020 Nov 3 21:34:14 201012-6925 kernel: [ 528.104906] IP: [] 0xa045d01f Nov 3 21:34:14 201012-6925 kernel: [ 528.104936] PGD 1c0f067 PUD 1c13063 PMD 2ea40067 PTE 0 Nov 3 21:34:14 201012-6925 kernel: [ 528.104967] Oops: 0010 [#1] SMP Nov 3 21:34:14 201012-6925 kernel: [ 528.104988] Modules linked in: lib80211_crypt_tkip(F) wl(POF) lib80211(F) rfcomm(F) bnep(F) bluetooth(F) snd_hda_codec_hdmi(F) snd_hda_codec_idt(F) coretemp(F) kvm_intel(F) arc4(F) kvm(F) joydev(F) ghash_clmulni_intel(F) aesni_intel(F) ablk_helper(F) cryptd(F) lrw(F) mac80211(F) snd_hda_intel(F) brcmutil(F) snd_hda_codec(F) snd_hwdep(F) snd_pcm(F) i915(F) snd_seq_midi(F) snd_rawmidi(F) snd_seq_midi_event(F) snd_seq(F) aes_x86_64(F) snd_timer(F) snd_seq_device(F) cfg80211(F) snd(F) cordic(F) drm_kms_helper(F) drm(F) mei(F) psmouse(F) soundcore(F) xts(F) ppdev(F) gf128mul(F) parport_pc(F) i2c_algo_bit(F) dell_laptop(F) dcdbas(F) dell_wmi(F) video(F) lpc_ich(F) serio_raw(F) mac_hid(F) sparse_keymap(F) snd_page_alloc(F) wmi(F) microcode(F) lp(F) parport(F) ahci(F) libahci(F) sdhci_pci(F) sdhci(F) e1000e(F) [last unloaded: bcma] Nov 3 21:34:14 201012-6925 kernel: [ 528.105424] CPU 0 Nov 3 21:34:14 201012-6925 kernel: [ 528.105438] Pid: 2695, comm: jockey-backend Tainted: PF O 3.8.0-33-generic #48~precise1-Ubuntu Dell Inc. Latitude E6320/ Nov 3 21:34:14 201012-6925 kernel: [ 528.105493] RIP: 0010:[] [] 0xa045d01f Nov 3 21:34:14 201012-6925 kernel: [ 528.105533] RSP: 0018:88001b405d50 EFLAGS: 00010282 Nov 3 21:34:14 201012-6925 kernel: [ 528.105558] RAX: 0001 RBX: 880031788000 RCX: Nov 3 21:34:14 201012-6925 kernel: [ 528.105590] RDX: RSI: a0861ec0 RDI: 880031788000 Nov 3 21:34:14 201012-6925 kernel: [ 528.105623] RBP: 88001b405d78 R08: R09: Nov 3 21:34:14 201012-6925 kernel: [ 528.105657] R10: 3684 R11: 0293 R12: 88001b405da0 Nov 3 21:34:14 201012-6925 kernel: [ 528.105690] R13: a08643e0 R14: 880031788098 R15: 8800317880f8 Nov 3 21:34:14 201012-6925 kernel: [ 528.105724] FS: 7fc348968700() GS:88010020() knlGS: Nov 3 21:34:14 201012-6925 kernel: [ 528.105760] CS: 0010 DS: E
[Kernel-packages] [Bug 1247712] Re: Unable to install Broadcom STA wireless dirver on 3.8 / 3.11 kernel via jockey-gtk
** Changed in: bcmwl (Baltix) Status: New => Confirmed ** Changed in: bcmwl (Baltix) Importance: Undecided => Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1247712 Title: Unable to install Broadcom STA wireless dirver on 3.8 / 3.11 kernel via jockey-gtk Status in Jockey driver manager: Invalid Status in “bcmwl” package in Ubuntu: Confirmed Status in “jockey” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Confirmed Status in “bcmwl” source package in Precise: Confirmed Status in “jockey” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: Confirmed Status in “bcmwl” package in Baltix: Confirmed Bug description: SRU request: Please accept jockey_0.9.7-0ubuntu7.15 into precise-proposed. [Impact] Kernel versions higher than 3.8 fail to rebind the Broadcom device to the driver thus compromising system stability. While rebinding is a nice feature it can't come at the cost of system stability. For this reason we'll disable this feature when dealing with Linux >= 3.8 and preserve it in the other cases. [Test Case] Install and reboot into Linux 3.8 or higher (linux-lts-saucy or linux- lts-trusty), then use Jockey to install the broadcom wireless driver. Jockey will hang and the system will probably hang on shutdown. [Regression Potential] It should be minimal i.e. there won't be device rebinding on the livecd. This, however, shouldn't be an issue since the open broadcom driver should already work out of the box. Furthermore the test suite now covers this test case. == Description == CID: 201303-13027 Dell Inspiron 5535 CID: 201012-6925 Dell Latitude E6320 CID: 201208-11536 Dell Latitude 6430u Affected chipsets: Broadcom 4365 Broadcom 4313 [14e4:4727] (rev 01) Broadcom 43132 The bcmwl (6.20.155.1+bdcom-0ubuntu0.0.2) cannot be installed on 12.04.4 (3.11.0-15), 12.04.3 (3.8.0-29) Steps: 1. Install Ubuntu 12.04.3 (or 12.04.4) + update 2. Boot to desktop 3. Install the Broadcom STA wireless driver via jockey-gtk Driver cannot be installed, jockey-gtk will stuck at "Downloading and installing driver" The last message from jockey.jog is: unbind/rebind on driver /sys/module/wl/drivers/pci:wl: device :02:00.0 Error message could be found in dmesg: Nov 3 21:34:14 201012-6925 kernel: [ 528.104653] wlc_lcnphy_rx_gain_tbl_free_entry = 5 Nov 3 21:34:14 201012-6925 kernel: [ 528.104863] BUG: unable to handle kernel paging request at a045d020 Nov 3 21:34:14 201012-6925 kernel: [ 528.104906] IP: [] 0xa045d01f Nov 3 21:34:14 201012-6925 kernel: [ 528.104936] PGD 1c0f067 PUD 1c13063 PMD 2ea40067 PTE 0 Nov 3 21:34:14 201012-6925 kernel: [ 528.104967] Oops: 0010 [#1] SMP Nov 3 21:34:14 201012-6925 kernel: [ 528.104988] Modules linked in: lib80211_crypt_tkip(F) wl(POF) lib80211(F) rfcomm(F) bnep(F) bluetooth(F) snd_hda_codec_hdmi(F) snd_hda_codec_idt(F) coretemp(F) kvm_intel(F) arc4(F) kvm(F) joydev(F) ghash_clmulni_intel(F) aesni_intel(F) ablk_helper(F) cryptd(F) lrw(F) mac80211(F) snd_hda_intel(F) brcmutil(F) snd_hda_codec(F) snd_hwdep(F) snd_pcm(F) i915(F) snd_seq_midi(F) snd_rawmidi(F) snd_seq_midi_event(F) snd_seq(F) aes_x86_64(F) snd_timer(F) snd_seq_device(F) cfg80211(F) snd(F) cordic(F) drm_kms_helper(F) drm(F) mei(F) psmouse(F) soundcore(F) xts(F) ppdev(F) gf128mul(F) parport_pc(F) i2c_algo_bit(F) dell_laptop(F) dcdbas(F) dell_wmi(F) video(F) lpc_ich(F) serio_raw(F) mac_hid(F) sparse_keymap(F) snd_page_alloc(F) wmi(F) microcode(F) lp(F) parport(F) ahci(F) libahci(F) sdhci_pci(F) sdhci(F) e1000e(F) [last unloaded: bcma] Nov 3 21:34:14 201012-6925 kernel: [ 528.105424] CPU 0 Nov 3 21:34:14 201012-6925 kernel: [ 528.105438] Pid: 2695, comm: jockey-backend Tainted: PF O 3.8.0-33-generic #48~precise1-Ubuntu Dell Inc. Latitude E6320/ Nov 3 21:34:14 201012-6925 kernel: [ 528.105493] RIP: 0010:[] [] 0xa045d01f Nov 3 21:34:14 201012-6925 kernel: [ 528.105533] RSP: 0018:88001b405d50 EFLAGS: 00010282 Nov 3 21:34:14 201012-6925 kernel: [ 528.105558] RAX: 0001 RBX: 880031788000 RCX: Nov 3 21:34:14 201012-6925 kernel: [ 528.105590] RDX: RSI: a0861ec0 RDI: 880031788000 Nov 3 21:34:14 201012-6925 kernel: [ 528.105623] RBP: 88001b405d78 R08: R09: Nov 3 21:34:14 201012-6925 kernel: [ 528.105657] R10: 3684 R11: 0293 R12: 88001b405da0 Nov 3 21:34:14 201012-6925 kernel: [ 528.105690] R13: a08643e0 R14: 880031788098 R15: 8800317880f8 Nov 3 21:34:14 201012-6925 kernel: [ 528.105724] FS: 7fc348968700() GS:88010020() knlGS: Nov 3 21:34:
[Kernel-packages] [Bug 43706] Re: Excessive memory usage on live CD
** Changed in: baltix Status: New => Confirmed ** Changed in: baltix Importance: Undecided => Medium ** Changed in: baltix Assignee: (unassigned) => Mantas Kriaučiūnas (mantas) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/43706 Title: Excessive memory usage on live CD Status in “casper” package in Ubuntu: Fix Released Status in “linux” package in Ubuntu: Incomplete Status in “linux-ubuntu-modules-2.6.22” package in Ubuntu: Won't Fix Status in Baltix GNU/Linux: Confirmed Bug description: I was poking around the /cow filesystem to see how much memory was being used and why. The figure was higher than I expected (14M), and the bulk of it was due to two things: /var/cache/debconf - the templates are huge, but we're also storing two copies of them (templates.dat and templates.dat-old). Unlinking templates.dat-old should immediately free up 5M of memory, at least until ubiquity runs. It would be nice if we could avoid this entirely, though. An md5sum check reveals that templates.dat and templates.dat-old are identical; if it's unchanged, then why make a backup? I don't see why this file should need to change during a casper session /lib/modules - something is causing many kernel modules to be copied, but not all of them. I'll attach a list. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/43706/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 43706] Re: Excessive memory usage on live CD
Why en_US.UTF-8 locale is generated every time during liveCD/liveUSB startup? See these lines in less /var/log/casper.log : Begin: Setting up locales... ... Generating locales... en_US.UTF-8... done Generation complete. done. Locale generation uses a lot of memory and slowdowns startup. I think en_US.UTF-8 locale should be already generated in filesystem.squashfs and other locales should be generated during liveCD/liveUSB startup only if user chooses another language in syslinux. It seems Ubuntu 12.04 and newer releases already contains en_US and other en_* locales in filesystem.squashfs (they are generated during installation of language-pack-en-base package), but script casper- bottom/14locales doesn't check if locale isn't already generated - I think command "localedef --list-archive" should be used for checking if needed locale isn't already generated. ** Changed in: baltix Importance: Medium => High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/43706 Title: Excessive memory usage on live CD Status in “casper” package in Ubuntu: Fix Released Status in “linux” package in Ubuntu: Incomplete Status in “linux-ubuntu-modules-2.6.22” package in Ubuntu: Won't Fix Status in Baltix GNU/Linux: Confirmed Bug description: I was poking around the /cow filesystem to see how much memory was being used and why. The figure was higher than I expected (14M), and the bulk of it was due to two things: /var/cache/debconf - the templates are huge, but we're also storing two copies of them (templates.dat and templates.dat-old). Unlinking templates.dat-old should immediately free up 5M of memory, at least until ubiquity runs. It would be nice if we could avoid this entirely, though. An md5sum check reveals that templates.dat and templates.dat-old are identical; if it's unchanged, then why make a backup? I don't see why this file should need to change during a casper session /lib/modules - something is causing many kernel modules to be copied, but not all of them. I'll attach a list. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/43706/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 43706] Re: Excessive memory usage on live CD
I've reported separate bug #1218429 (casper-bottom/14locales should check if locale isn't already generated) It seems command /usr/sbin/locale-gen , used in 14locales script, should detect that en_US .UTF-8 is already generated, but doesn't detect during startup of live system and generates already generated locale :( -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/43706 Title: Excessive memory usage on live CD Status in “casper” package in Ubuntu: Fix Released Status in “linux” package in Ubuntu: Incomplete Status in “linux-ubuntu-modules-2.6.22” package in Ubuntu: Won't Fix Status in Baltix GNU/Linux: Confirmed Bug description: I was poking around the /cow filesystem to see how much memory was being used and why. The figure was higher than I expected (14M), and the bulk of it was due to two things: /var/cache/debconf - the templates are huge, but we're also storing two copies of them (templates.dat and templates.dat-old). Unlinking templates.dat-old should immediately free up 5M of memory, at least until ubiquity runs. It would be nice if we could avoid this entirely, though. An md5sum check reveals that templates.dat and templates.dat-old are identical; if it's unchanged, then why make a backup? I don't see why this file should need to change during a casper session /lib/modules - something is causing many kernel modules to be copied, but not all of them. I'll attach a list. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/43706/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1171285] Re: intel centrino Wireless-N 1000 firmware is wrong under LTS 12.04
Could you test if your Intel Centrino Wireless-N 1000 still doesn't work with latest Ubuntu 12.04.3 LTS (with kernel linux-image-3.8.0-xx) ? Maybe problem was only with older Linux 3.2.0 kernels? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1171285 Title: intel centrino Wireless-N 1000 firmware is wrong under LTS 12.04 Status in “linux-firmware” package in Ubuntu: Confirmed Bug description: After a fresh installation, I can't drive my wireless card, Intel Centrino Wireless-N 1000. The problem is about the firmware used in LTS 12.04. First I'm very sure that both my hardware switch and soft switch are on. [code] nico@jacob-pc:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no nico@jacob-pc:~$ [/code] Then when running 'iwconfig' command, I got this [code] nico@jacob-pc:~$ iwconfig eth0 no wireless extensions. lono wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off [/code] This means the system can probe my card, but can't drive it. Third, I used 'iwlist scan' command, 'ifup wlan0' command and 'dhclient wlan0' command, there are the outputs: [code] nico@jacob-pc:~$ iwlist scan eth0 Interface doesn't support scanning. loInterface doesn't support scanning. wlan0 Failed to read scan data : Network is down nico@jacob-pc:~$ sudo ifup wlan0 [sudo] password for nico: Ignoring unknown interface wlan0=wlan0. nico@jacob-pc:~$ sudo dhclient wlan0 RTNETLINK answers: Input/output error ^C [/code] This means the system can't drive my card, there may be something wrong with the firmware. After a long time trying, I found a way to solve this problem at last. Download a older firmware from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-1000-ucode-128.50.3.1.tgz This firmware is only for kernel 2.6.30+, the original one is for 3.2+. LTS 12.04 use a latest one from that website, that's the reason. So just delete or rename the original one which is named iwlwifi-1000-5.ucode, and put iwlwifi-1000-3.ucode from that tarball to /lib/firmware, and run 'modprobe -r iwlwifi', 'modprobe iwlwifi', everything will be wonderful. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-firmware 1.79.1 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic 3.2.39 Uname: Linux 3.2.0-39-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.2 Architecture: amd64 Date: Mon Apr 22 10:24:08 2013 Dependencies: InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1) MarkForUpload: True PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux-firmware UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1171285/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 250833] Re: continuously requesting b43legacy/ucode2.fw
** Changed in: b43-fwcutter (Ubuntu) Status: Expired => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to b43-fwcutter in Ubuntu. https://bugs.launchpad.net/bugs/250833 Title: continuously requesting b43legacy/ucode2.fw Status in “b43-fwcutter” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Expired Bug description: Binary package hint: b43-fwcutter I am testing Ubuntu Intrepid daily-build 21 July 2008 on my HP Compaq nx9010 Laptop. Linux ubuntu 2.6.26-4-generic #1 SMP Mon Jul 14 18:39:53 UTC 2008 i686 GNU/Linux My wireless network card is not working and I can see in /var/log/messages that it is continuously requesting b43legacy/ucode2.fw. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/b43-fwcutter/+bug/250833/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems
** Changed in: linux (Baltix) Importance: Medium => High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1208257 Title: [HP ProBook 4540s] brightness control problems Status in “linux” package in Ubuntu: Incomplete Status in “linux” package in Baltix: Triaged Bug description: I bought a laptop in December 2012, immediately tried to put Ubuntu 12.10, got broken wi-fi and non-working graphics acceleration. Updated kernel to version 3.6, with graphic acceleration was all right, even partially earned wi-fi. After some time wi-fi hang, helped only restart the network subsystem. Updated kernel to 3.7, with the wi-fi was all became normal, but stopped working brightness control with the Fn keys. Progress bar indicates that the brightness changes, but in fact nothing happens. Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing changes. Upon adjustment has broken in 3.7 kernel. It turns out that this is a regression. WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor. --- ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: country UA: (2402 - 2482 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-08-04 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3887 F pulseaudio ubuntu14062 F pulseaudio CRDA: country UA: (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130807) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper persistent initrd=/casper/initrd.lz splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3 RelatedPackageVersions: linux-restricted-modules-3.10.0-6-generic N/A linux-backports-modules-3.10.0-6-generic N/A linux-firmware1.113 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: saucy Uname: Linux 3.10.0-6-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1208257/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
** Changed in: baltix Status: Fix Released => Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Won't Fix Status in “syslinux” package in Ubuntu: Fix Released Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: "This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU." THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems
I can confirm this bug on several HP Probooks, including HP ProBook 4740s with Ubuntu 12.04.3 LTS (Precise) daily-live 2013-08-18 (from http://cdimage.ubuntu.com/precise/), which has Linux kernel 3.8 (tested with several linux-image-generic-lts-raring versions, including the latest - 3.8.0-29-generic) Changing screen brighness works fine if I add boot parameter acpi_backlight=vendor in Ubuntu 12.04.3 LiveCD or installed system. Another workaround is to install older Linux kernel 3.5 from Ubuntu 12.04.2: sudo apt-get install linux-image-generic-lts-quantal So, problem is Btw, this HP Probook has 2 video chipsets: ubuntu@ubuntu:~$ lspci |grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7550M/7570M/7650M] I'm attachink /var/log/Xorg.0.log file when using 3.8.0-29-generic kernel (Ubuntu 12.04.3 LiveCD) ** Attachment added: "/var/log/Xorg.0.log file when using 3.8.0-29-generic kernel" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1208257/+attachment/3776767/+files/Xorg.0.log ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Also affects: linux (Baltix) Importance: Undecided Status: New ** Summary changed: - [HP ProBook 4540s] brightness control problems + HP ProBook 4540s and 4740s brightness control problems -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1208257 Title: HP ProBook 4540s and 4740s brightness control problems Status in “linux” package in Ubuntu: Confirmed Status in “linux” package in Baltix: New Bug description: I bought a laptop in December 2012, immediately tried to put Ubuntu 12.10, got broken wi-fi and non-working graphics acceleration. Updated kernel to version 3.6, with graphic acceleration was all right, even partially earned wi-fi. After some time wi-fi hang, helped only restart the network subsystem. Updated kernel to 3.7, with the wi-fi was all became normal, but stopped working brightness control with the Fn keys. Progress bar indicates that the brightness changes, but in fact nothing happens. Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing changes. Upon adjustment has broken in 3.7 kernel. It turns out that this is a regression. WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor. --- ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: country UA: (2402 - 2482 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-08-04 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3887 F pulseaudio ubuntu14062 F pulseaudio CRDA: country UA: (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130807) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed
[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems
** Changed in: linux (Baltix) Status: New => Triaged ** Changed in: linux (Baltix) Importance: Undecided => Medium ** Changed in: linux (Baltix) Assignee: (unassigned) => Mantas Kriaučiūnas (mantas) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1208257 Title: [HP ProBook 4540s] brightness control problems Status in “linux” package in Ubuntu: Incomplete Status in “linux” package in Baltix: Triaged Bug description: I bought a laptop in December 2012, immediately tried to put Ubuntu 12.10, got broken wi-fi and non-working graphics acceleration. Updated kernel to version 3.6, with graphic acceleration was all right, even partially earned wi-fi. After some time wi-fi hang, helped only restart the network subsystem. Updated kernel to 3.7, with the wi-fi was all became normal, but stopped working brightness control with the Fn keys. Progress bar indicates that the brightness changes, but in fact nothing happens. Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing changes. Upon adjustment has broken in 3.7 kernel. It turns out that this is a regression. WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor. --- ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: country UA: (2402 - 2482 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-08-04 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3887 F pulseaudio ubuntu14062 F pulseaudio CRDA: country UA: (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130807) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper persistent initrd=/casper/initrd.lz splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3 RelatedPackageVersions: linux-restricted-modules-3.10.0-6-generic N/A linux-backports-modules-3.10.0-6-generic N/A linux-firmware1.113 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: saucy Uname: Linux 3.10.0-6-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bu