[Kernel-packages] [Bug 1239459] Re: 1814:3290 [Asus X200CA] wifi doesn't connect or disconnects after few seconds
Thanks for sharing the best solution. https://promocrack.com/;>promocrack -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1239459 Title: 1814:3290 [Asus X200CA] wifi doesn't connect or disconnects after few seconds Status in Linux: Fix Released Status in linux package in Ubuntu: Fix Released Bug description: With the new 3.11.0-12-generic kernel, wifi has problems to connect with many errors like these: Oct 13 23:50:03 ubuntotto kernel: [ 1186.580726] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush Oct 13 23:50:03 ubuntotto kernel: [ 1186.740659] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush Oct 13 23:50:04 ubuntotto kernel: [ 1186.900544] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush Oct 13 23:50:04 ubuntotto kernel: [ 1187.060571] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush Oct 13 23:50:04 ubuntotto kernel: [ 1187.096576] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue 0 Oct 13 23:50:05 ubuntotto kernel: [ 1188.280106] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush Oct 13 23:50:05 ubuntotto kernel: [ 1188.440128] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush Oct 13 23:51:06 ubuntotto kernel: [ 1249.560697] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush Oct 13 23:51:06 ubuntotto kernel: [ 1249.720644] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush Oct 13 23:51:07 ubuntotto kernel: [ 1249.880590] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush Oct 13 23:51:07 ubuntotto kernel: [ 1250.040543] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: andrea 1791 F pulseaudio Date: Sun Oct 13 23:45:04 2013 HibernationDevice: RESUME=UUID=297ef090-5420-41f6-8439-f1254f3e9e15 InstallationDate: Installed on 2013-10-12 (1 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: ASUSTeK COMPUTER INC. X200CA MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=088f2a7d-b78f-4bdd-a184-754b70a3184a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-10-13 (0 days ago) dmi.bios.date: 09/18/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: X200CA.208 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: X200CA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrX200CA.208:bd09/18/2013:svnASUSTeKCOMPUTERINC.:pnX200CA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnX200CA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: X200CA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1239459/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1811999] Re: [USB-Audio - Audioengine D3, playback] fails after a while (a second)
the dmesg about disconnect is manual disconnection of usb DAC [ 5937.978117] usb 1-1.4.2: USB disconnect, device number 16 After fresh boot, if I plug-in the DAC the dmesg shows [ 155.552404] usb 1-1.4.1: new full-speed USB device number 10 using xhci_hcd [ 155.941031] usb 1-1.4.1: New USB device found, idVendor=2912, idProduct=120b, bcdDevice= 1.0c [ 155.941035] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 155.941037] usb 1-1.4.1: Product: Audioengine D3 [ 155.941038] usb 1-1.4.1: Manufacturer: Audioengine [ 155.941040] usb 1-1.4.1: SerialNumber: Audioengine [ 156.503248] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 [ 156.526074] usbcore: registered new interface driver snd-usb-audio [ 156.575999] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 [ 156.605461] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 I will try to get my hands on another system running 18.04. But my ties to upgrade the kernel up to 4.20.2 resulted in no chance. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1811999 Title: [USB-Audio - Audioengine D3, playback] fails after a while (a second) Status in linux package in Ubuntu: Incomplete Bug description: USB DAC stops playing sound after a second. I had problem with kernel 4.15. So, I tried upgrading to 4.19 but still issue persists. I think, we might need to add it to sound/usb/quirks.c I see following in dmesg [ 155.552404] usb 1-1.4.1: new full-speed USB device number 10 using xhci_hcd [ 155.941031] usb 1-1.4.1: New USB device found, idVendor=2912, idProduct=120b, bcdDevice= 1.0c [ 155.941035] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 155.941037] usb 1-1.4.1: Product: Audioengine D3 [ 155.941038] usb 1-1.4.1: Manufacturer: Audioengine [ 155.941040] usb 1-1.4.1: SerialNumber: Audioengine [ 156.503248] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 [ 156.526074] usbcore: registered new interface driver snd-usb-audio [ 156.575999] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 [ 156.605461] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 And lsusb -v has following entry for the device. Bus 001 Device 017: ID 2912:120b Couldn't open device, some information will be missing Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x2912 idProduct 0x120b bcdDevice1.0c iManufacturer 1 iProduct2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 131 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 43 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength13 bDescriptorType36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 7 bSourceID 5 bControlSize2 bmaControls( 0) 0x01 bmaControls( 0) 0x00 Mute Control bmaControls( 1) 0x02 bmaControls( 1) 0x00 Volume Control bmaControls( 2) 0x02 bmaControls( 2) 0x00 Volume Control iFeature0 AudioControl Interface Descriptor: bLength 9 bDescriptorType
[Kernel-packages] [Bug 1811999] Re: [USB-Audio - Audioengine D3, playback] fails after a while (a second)
** Description changed: USB DAC stops playing sound after a second. - I had problem with kernel 4.15. - So, I tried upgrading to 4.19 but still issue persists. + I had problem with kernel 4.15. + So, I tried upgrading to 4.19 but still issue persists. I think, we might need to add it to sound/usb/quirks.c I see following in dmesg - [ 5937.978117] usb 1-1.4.2: USB disconnect, device number 16 - [ 5955.721597] usb 1-1.4.1: new full-speed USB device number 17 using xhci_hcd - [ 5956.302910] usb 1-1.4.1: New USB device found, idVendor=2912, idProduct=120b, bcdDevice= 1.0c - [ 5956.302917] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 - [ 5956.302921] usb 1-1.4.1: Product: Audioengine D3 - [ 5956.302926] usb 1-1.4.1: Manufacturer: Audioengine - [ 5956.302929] usb 1-1.4.1: SerialNumber: Audioengine - [ 5956.320621] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 - [ 5956.920844] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 - [ 5956.938929] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 + [ 155.552404] usb 1-1.4.1: new full-speed USB device number 10 using xhci_hcd + [ 155.941031] usb 1-1.4.1: New USB device found, idVendor=2912, idProduct=120b, bcdDevice= 1.0c + [ 155.941035] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 + [ 155.941037] usb 1-1.4.1: Product: Audioengine D3 + [ 155.941038] usb 1-1.4.1: Manufacturer: Audioengine + [ 155.941040] usb 1-1.4.1: SerialNumber: Audioengine + [ 156.503248] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 + [ 156.526074] usbcore: registered new interface driver snd-usb-audio + [ 156.575999] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 + [ 156.605461] usb 1-1.4.1: 1:1: cannot get freq at ep 0x1 + And lsusb -v has following entry for the device. Bus 001 Device 017: ID 2912:120b Couldn't open device, some information will be missing Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x2912 idProduct 0x120b bcdDevice1.0c iManufacturer 1 iProduct2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 131 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 43 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength13 bDescriptorType36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 7 bSourceID 5 bControlSize2 bmaControls( 0) 0x01 bmaControls( 0) 0x00 Mute Control bmaControls( 1) 0x02 bmaControls( 1) 0x00 Volume Control bmaControls( 2) 0x02 bmaControls( 2) 0x00 Volume Control iFeature0 AudioControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 8 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 7 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio
[Kernel-packages] [Bug 1206737] [NEW] Error in opening mpb
Public bug reported: mpb command not working in Ubuntu 12.04LTS but it's working on debian and Olivia 15 In the terminal: $ mpb ERROR: In procedure open-file: ERROR: No such file or directory: /usr/share/libctl3/base/include.scm these errors occurs. Solve these errors. mpb installed correctly and I have also Attached the photo of terminal commands and after errors generates. Thanks. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: error.jpg https://bugs.launchpad.net/bugs/1206737/+attachment/3755318/+files/error.jpg -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1206737 Title: Error in opening mpb Status in “linux” package in Ubuntu: New Bug description: mpb command not working in Ubuntu 12.04LTS but it's working on debian and Olivia 15 In the terminal: $ mpb ERROR: In procedure open-file: ERROR: No such file or directory: /usr/share/libctl3/base/include.scm these errors occurs. Solve these errors. mpb installed correctly and I have also Attached the photo of terminal commands and after errors generates. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1206737/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp