Good day, I'm experiencing this bug on Ubuntu 20.04.3 LTS. My motherboard is AsRock 970 Extreme4
Thank you, Fabio -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1824259 Title: Headphone jack switch sense is inverted: plugging in headphones disables headphone output Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Released Status in linux source package in Cosmic: Fix Released Status in linux source package in Disco: Fix Released Bug description: [Impact] On the LattePanda board, the headphone detection signal is not correct, it is inverted: plugging in headphones disables headphone output [Fix] In the codec driver, there already is a fixup, just set the inv_jd1_1 to true. [Test Case] It is tested by the bug reporter, please refer to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1824259/comments/23 [Regression Risk] Low. This fix is specific to a board which is defined by DMI strings. My machine is a LattePanda board, which uses a "chtrt5645" device as a sound card. It has a single headphone output jack, which I think is a TRRS jack, with a mic input, such as is normally used on phones. When I don't have headphones plugged in, the system thinks headphones *are* plugged in. Gnome Control Center shows my audio device as being headphones. If I insert a headphone connector partway into the jack, I can even get sound in the headphones. But if I plug the headphones all the way in, the system decided that I have *un*plugged the headphones, and switches output over to "Speaker". The system doesn't actually have a speaker, only a headphone jack. And when the system switches over to "Speaker", I get no sound out of the headphones, even if I open "pavucontrol" and swap over to "Headphones (unplugged)" on the "Output Devices" tab. This is what "pacmd"'s "list-cards" command says with my headphones *unplugged*: 2 card(s) available. index: 0 name: <alsa_card.pci-0000_00_02.0-platform-hdmi-lpe-audio> driver: <module-alsa-card.c> owner module: 7 properties: alsa.card = "1" alsa.card_name = "Intel HDMI/DP LPE Audio" alsa.long_card_name = "Intel HDMI/DP LPE Audio" alsa.driver_name = "snd_hdmi_lpe_audio" device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio" sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card1" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "22b0" device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers" device.string = "1" device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no) output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no) output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no) output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no) output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no) output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no) output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no) output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no) off: Off (priority 0, available: unknown) active profile: <off> ports: hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" index: 1 name: <alsa_card.platform-cht-bsw-rt5645> driver: <module-alsa-card.c> owner module: 8 properties: alsa.card = "0" alsa.card_name = "chtrt5645" alsa.long_card_name = "AMICorporation-Defaultstring-Defaultstring-CherryTrailCR" alsa.driver_name = "snd_soc_sst_cht_bsw_rt5645" device.bus_path = "platform-cht-bsw-rt5645" sysfs.path = "/devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card0" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card" profiles: HiFi: Default (priority 8000, available: unknown) off: Off (priority 0, available: unknown) active profile: <HiFi> sinks: alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink/#0: Built-in Audio Headphones + Speaker sources: alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink.monitor/#0: Monitor of Built-in Audio Headphones + Speaker alsa_input.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__source/#1: Built-in Audio Headset Microphone + Internal Analog Microphone ports: [Out] Headphones: Headphones (priority 100, latency offset 0 usec, available: yes) properties: [Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: no) properties: [In] HSMic: Headset Microphone (priority 100, latency offset 0 usec, available: yes) properties: [In] Mic: Internal Analog Microphone (priority 150, latency offset 0 usec, available: no) properties: When I plug in the headphones, the entry for card 1 changes to: index: 1 name: <alsa_card.platform-cht-bsw-rt5645> driver: <module-alsa-card.c> owner module: 8 properties: alsa.card = "0" alsa.card_name = "chtrt5645" alsa.long_card_name = "AMICorporation-Defaultstring-Defaultstring-CherryTrailCR" alsa.driver_name = "snd_soc_sst_cht_bsw_rt5645" device.bus_path = "platform-cht-bsw-rt5645" sysfs.path = "/devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card0" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card" profiles: HiFi: Default (priority 8000, available: unknown) off: Off (priority 0, available: unknown) active profile: <HiFi> sinks: alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink/#0: Built-in Audio Headphones + Speaker sources: alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__sink.monitor/#0: Monitor of Built-in Audio Headphones + Speaker alsa_input.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645__source/#1: Built-in Audio Headset Microphone + Internal Analog Microphone ports: [Out] Headphones: Headphones (priority 100, latency offset 0 usec, available: no) properties: [Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: unknown) properties: [In] HSMic: Headset Microphone (priority 100, latency offset 0 usec, available: no) properties: [In] Mic: Internal Analog Microphone (priority 150, latency offset 0 usec, available: unknown) properties: Note that the "Headphones" port is now "available: no". PulseAudio is getting all these ports from Alsa's UCM (Use Case Manager) system, which has a bunch of config files that live in /usr/share/alsa/ucm. I tried editing /usr/share/alsa/ucm/chtrt5645/HiFi.conf to swap the enable and disable procedures for the headphones and the speakers, in hopes of convincing it to route audio out the headphone jack, but that didn't work. This problem has affected me since at least Ubuntu 18.04. I've upgraded through 18.10 and to 19.04 today. All three releases have the same problem. 1. How is the PulseAudio/ALSA system determining whether headphones are plugged in or not? 2. How do I invert the sense of that test? ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: libasound2 1.1.8-1 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 ApportVersion: 2.20.10-0ubuntu26 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Wed Apr 10 19:21:09 2019 InstallationDate: Installed on 2018-12-08 (123 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-lib UpgradeStatus: Upgraded to disco on 2019-04-11 (0 days ago) --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: anovak 3022 F.... pulseaudio DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2018-12-08 (125 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0bda:8152 Realtek Semiconductor Corp. RTL8152 Fast Ethernet Adapter Bus 001 Device 004: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID) Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Default string Default string Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-8-generic root=UUID=a40848aa-7225-4844-805d-e726c496e2a2 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 RelatedPackageVersions: linux-restricted-modules-5.0.0-8-generic N/A linux-backports-modules-5.0.0-8-generic N/A linux-firmware 1.178 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Tags: disco Uname: Linux 5.0.0-8-generic x86_64 UnreportableReason: This report is about a package that is not installed. UpgradeStatus: Upgraded to disco on 2019-04-11 (2 days ago) UserGroups: adm cdrom dip docker libvirt lpadmin plugdev pulse-access sambashare sudo _MarkForUpload: False dmi.bios.date: 05/15/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: DF-BI-7-S70CR200-CC55F-022-B dmi.board.asset.tag: Default string dmi.board.name: Cherry Trail CR dmi.board.vendor: AMI Corporation dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 9 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrDF-BI-7-S70CR200-CC55F-022-B:bd05/15/2018:svnDefaultstring:pnDefaultstring:pvrDefaultstring:rvnAMICorporation:rnCherryTrailCR:rvrDefaultstring:cvnDefaultstring:ct9:cvrDefaultstring: dmi.product.family: Tablet dmi.product.name: Default string dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Default string To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1824259/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp