[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
Hello Christopher.. Seems ok with Lucid, printer status ok ready with 1st plugging after system start up. but with different conditions: - I have to download driver from Canon site : Canon MX320 series Ver.3.10 (since Lucid didn't provide MX series driver), which is different from driver used in Precise (from its database) - Seems that Lucid only read 1 interface but Precise read 2 interfaces (printer fax). I don't really understand about that either what is the correct behavior since I don't understand faxing via Ubuntu. URI that automatically read after cable plugged driver not yet installed : usb://Canon/MX320%20series%20FAX ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
No...Precise is my first Ubuntu to test. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
chris, for regression testing purposes, could you please test for this in Lucid http://old-releases.ubuntu.com/releases/lucid/ and advise on the results? ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Incomplete Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
No need to restart. Strange...just replug then it'll be ready. Perhaps behavior in the end of comment #49 could be a hint. Printer fax status (usually) switched after replugging cable. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
chris, just to clarify, in Precise the USB Printer does not need to be replugged to work after boot? ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Incomplete Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
I've learned creating bootable flashdisk I've just tried 13.10 daily. Can't say that this bug is fixed since 13.10 generates different behavior. Printer fax status are always idle even cable unplugged. If cable plugged then it will do printing. But if cable unplugged then no job is sending printer queue is empty. Perhaps I made mistake while trying, but I think I can't do testing any further with 13.10.. Too many problems...drives me crazy.. My stupid suspicion currently is printer driver conflicts with fax driver (using same driver). Or, perhaps, because both using same interface/port? ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
chris, did this problem not occur in a release prior to Precise? ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Incomplete Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
Hi Christopher.. In precise, print job sent even printer cable unplugged. Default state if cable unplugged is: - printer: idle (ready) - fax: stopped (paused) Here are devices URI, perhaps it helps: - printer: usb://Canon/MX320%20series?serial=15E055interface=1 - fax: usb://Canon/MX320%20series%20FAX?serial=15E055interface=2 Both using same make model (seems that we call it driver) : Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1 ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
** Description changed: While working a moment on LibreOffice Calc found that facts: - - LO hangs for a while after execute save. And I found that my 0bc2:2300 Seagate USB HDD was not working. (file that I used to work execute save located on the USB HDD). Take a long time for the HDD to wake up again. - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 ** Tags removed: resume -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard:
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
chris, could you please test for this in Saucy via http://cdimage.ubuntu.com/daily-live/current/ and advise on if this is still reproducible? No need to perform an apport-collect at this time. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Incomplete Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
Emm...looks like I have to burn dvd for that since I still don't know how to do it with flashdisk :) It's ok I'll do that when I have time..perhaps several days later. I also have to say sorry to revise comment #44. The behavior looks like inconsistent, sometimes printer is on while plugging for the 1st time after system booting. I found another fact: while printer is off, fax (same device) is on, vice versa. And I can swith on/off printer or fax via system-config-printer. Looks like printer driver problem.. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Incomplete Bug description: While working a moment on LibreOffice Calc found that facts: - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1159358] Re: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot
Hi Chritopher, thanks for your suggestion. I had edited summary in this bug for printer problem. External HDD problem parsed to bug #1222313 Please advice if you need more information. ** Summary changed: - [HP Pavillion dm3-1109TU] USB Printer HDD external can't wake up after a moment of time + [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1159358 Title: [HP Pavillion dm3-1109TU] USB Printer needs replug to work after boot Status in “linux” package in Ubuntu: Confirmed Bug description: While working a moment on LibreOffice Calc found that facts: - LO hangs for a while after execute save. And I found that my 0bc2:2300 Seagate USB HDD was not working. (file that I used to work execute save located on the USB HDD). Take a long time for the HDD to wake up again. - Print job was pending (printer not printing). Found that the printer was not working. Usually if the problem persists, plug out the USB cable and then plug in again. I don't find any solution other than replugging printer USB cable to wake up the printer. HP Pavillion dm3-1109TU Printer: Canon Pixma MX328 (driver: Canon PIXMA MX300 - CUPS+Gutenprint v5.2.8-pre1) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-39.62-generic-pae 3.2.39 Uname: Linux 3.2.0-39-generic-pae i686 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 CompizPlugins: [core,composite,opengl,imgjpeg,decor,imgpng,snap,obs,gnomecompat,vpswitch,compiztoolbox,resize,regex,dbus,mousepoll,grid,place,animation,move,session,workarounds,switcher,expo,wall,fade,scale] CompositorRunning: compiz Date: Sun Mar 24 15:55:26 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3649] Subsystem: Hewlett-Packard Company Device [103c:3649] InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Hewlett-Packard HP Pavilion dm3 Notebook PC MarkForUpload: True ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-39-generic-pae root=UUID=2E2462FD2462C783 loop=/hostname/disks/root.disk ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Insyde Corp. dmi.bios.version: F.19 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3649 dmi.board.vendor: Hewlett-Packard dmi.board.version: 41.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrF.19:bd11/16/2010:svnHewlett-Packard:pnHPPaviliondm3NotebookPC:pvr048711241F1011012:rvnHewlett-Packard:rn3649:rvr41.3D:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP Pavilion dm3 Notebook PC dmi.product.version: 048711241F1011012 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.39-0ubuntu0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.4 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.12 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.3 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1159358/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp