[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
..and look here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1216583 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
this seems to be worked around in 14.04 since resizing is live by default. But problem persists if a user changes to rectangle instead of normal in ccsm -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Typ
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
might this be a duplicate of this bug? https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1280020 it's a different acer device, but using the same SD controller from what I can find, according to that bugs comment thread the SD card reader works in 14.04 with 3.13.0-8-generic #28-Ubuntu SMP kernel. I shall try on my own Acer V5-171 with a Broadcaom BCM57765/57785 asap -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
This bug is still present in Ubuntu 14.04 with both stock and 3.14 kernels. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.ch
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
StefanF, I took care of attaching these to the upstream report (https://bugzilla.kernel.org/show_bug.cgi?id=59311). Thanks a lot for collecting them. I apologize that I haven't had time to make progress on this issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
StefanF, thank you for for attaching the requested attachments. However, it was requested this is posted to the upstream report (not downstream), and not compressed (as compressing small attachments make it harder for folks to access your attachments). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.ta
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
StefanF (stefan) , as i see ubuntu not very interesting to solve this bug. Nothing changed in past six months. I think best off all - write to lkml or sta...@vger.kernel.org and ask help from kernel devs. P.S. I have this problem and want to say very big thanks for your workaround. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.ver
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
The test #65 was with version v3.13-rc3. I repeated it with v3.13-rc5 with the same result. The installed packages were: linux-headers-3.13.0-031300rc5_3.13.0-031300rc5.201312221635_all.deb linux-headers-3.13.0-031300rc5-generic_3.13.0-031300rc5.201312221635_i386.deb linux-image-3.13.0-031300rc5-generic_3.13.0-031300rc5.201312221635_i386.deb I attached the output of dmesg, lspci -vv and acpidump, executed as root with no workaround applied and an SD card inserted. Now I would like to see that somebody works on the problem or decides not to fix it. I like to help with additional tests to help. But I dont like to test any new kernel release if the same result is expected because no related code has been changed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
** Attachment added: "lspci_vv.txt.gz" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3935033/+files/lspci_vv.txt.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - B
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
** Attachment added: "dmesg.txt.gz" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3935032/+files/dmesg.txt.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board V
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
** Attachment added: "acpidump.txt.gz" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+attachment/3935031/+files/acpidump.txt.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - B
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
StefanF, thank you for testing hte mainline kernel 3.13. Could you please specify which version of 3.13 specifically you tested? If it's not the latest (now v3.13-rc5) could you please test with this and then provide the information the maintainer requested in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/comments/61 ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
The issue is still reproduceable with the mainline Kernel 3.13, and the workaround with setpci is still working. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: Acer dmi.bios.version: V1.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 1
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
StefanF, thank you for your comments. Regarding them: >"Why should I test the latest mainline Kernel again?" The upstream maintainer has requested this in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/comments/61 , with accompanying attachment. >"I did that already more than 5 times after I reported the problem." You testing this out is appreciated. However, the number of times one tests is just one data point. What's most important is keeping your bug report relevant in cadence with upstream releases, and providing the information requested by upstream maintainers. >"But I found no a single hint that the problem cause is found and solved." The upstream maintainer has previously explained that the reason the cause isn't found is because of the missing information requested in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/comments/61 . >"See Bug Bug #1067222." Unfortunately, asking one to read some other person's Expired report, would not terribly helpful here. >"So testing again and again will not help anybody." This would be inverted logic. Not performing the requested testing helps to ensure your bug falls out of relevance with upstream. >"Please ask me when some related code has been changed." Please see above. Thank you for your understanding. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID
[Kernel-packages] [Bug 1178131] Re: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work
Why should I test the latest mainline Kernel again? I did that already more than 5 times after I reported the problem. But I found no a single hint that the problem cause is found and solved. See Bug Bug #1067222. So testing again and again will not help anybody. Please ask me when some related code has been changed. Until then I can live with the workaround or use an external cardreader. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc [Acer Aspire One 756] SD card slot doesn't work Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Triaged Bug description: My SD Card reader will not work without reloading the tg3 module. When I insert an SD card, dmesg output: [ 409.712345] mmc0: Timeout waiting for hardware interrupt. [ 419.77] mmc0: Timeout waiting for hardware interrupt. [ 429.732104] mmc0: Timeout waiting for hardware interrupt. [ 439.742025] mmc0: Timeout waiting for hardware interrupt. [ 443.841471] mmc0: Card removed during transfer! [ 443.841477] mmc0: Resetting controller. The type of SD card does not matter and it does not matter if an ethernet cable is plugged. With Ubuntu 11.10, which works fine out of the box. Dmesg does not show any error or warning. 10.04: Does not work even when reloading the tg3 module. Dmesg reports error -84 during SD card init. 12.04 32-bit: Works when reloading the tg3 module. Otherwise timeout errors occur. 13.04 32-bit: same as above with 12.04. 12.04 with 3.10.0-rc1 mainline kernel: same as with 12.04. WORKAROUND: setpci -s 00:1c.2 0x50.B=0x40 WORKAROUND: setpci -s 00:1c.2 0x50.B=0x41 WORKAROUND: Perform at a terminal: rmmod tg3 modprobe tg3 rmmod tg3: [ 447.384229] tg3 :04:00.0: PME# enabled [ 447.384258] tg3 :04:00.0: wake-up capability enabled by ACPI [ 447.417401] tg3 :04:00.0: PCI INT A disabled modprobe tg3: [ 475.816235] tg3.c:v3.121 (November 2, 2011) [ 475.819526] mmc0: new high speed SDHC card at address 0007 [ 475.832068] tg3 :04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 475.832129] tg3 :04:00.0: setting latency timer to 64 [ 475.839493] mmcblk0: mmc0:0007 SD08G 7.48 GiB [ 475.841628] mmcblk0: p1 [ 475.880672] tg3 :04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 475.880680] tg3 :04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 475.880685] tg3 :04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 475.880690] tg3 :04:00.0: eth0: dma_rwctrl[0001] dma_mask[64-bit] [ 475.908963] udevd[2073]: renamed network interface eth0 to eth1 [ 475.916412] tg3 :04:00.0: irq 44 for MSI/MSI-X [ 475.916426] tg3 :04:00.0: irq 45 for MSI/MSI-X [ 475.916437] tg3 :04:00.0: irq 46 for MSI/MSI-X [ 476.486620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 476.487582] ADDRCONF(NETDEV_UP): eth1: link is not ready ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-41-generic-pae 3.2.0-41.66 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic-pae 3.2.42 Uname: Linux 3.2.0-41-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC271X Analog [ALC271X Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stefan 2100 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 43' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250742,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Thu May 9 09:42:43 2013 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:d251 Suyin Corp. MachineType: Acer AO756 MarkForUpload: True ProcEnviron: LANGUAGE=de_DE:en TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-41-generic-pae root=UUID=e1e0405e-1b4d-4f0d-89f8-9324d70236c9 ro quiet splash acpi_backlight=vendor vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-41-generic-pae N/A linux-backports-modules-3.2.0-41-generic-pae N/A linux-firmware1.79.4 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No
