[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
This bug was fixed in the package linux - 3.13.0-24.46 --- linux (3.13.0-24.46) trusty; urgency=low [ Andy Whitcroft ] * [Config] d-i -- add nvme devices to block-modules udeb - LP: #1303710 [ Paolo Pisati ] * [Config] build vexpress a9 dtb - LP: #1303657 * [Config] disable HVC_DCC - LP: #1303657 [ Tim Gardner ] * Release Tracking Bug - LP: #1305158 * rebase to v3.13.9 * CONFIG_RTLBTCOEXIST=m - LP: #1296591 [ Upstream Kernel Changes ] * HID: Bluetooth: hidp: make sure input buffers are big enough - LP: #1252874 * ACPI / video: Add systems that should favour native backlight interface - LP: #1303419 * rds: prevent dereference of a NULL device in rds_iw_laddr_check - LP: #130 - CVE-2014-2678 * x86/efi: Fix 32-bit fallout - LP: #1301590 * drm/nouveau/devinit: tidy up the subdev class definition - LP: #1158689 * drm/nouveau/device: provide a way for devinit to mark engines as disabled - LP: #1158689 * drm/nv50-/devinit: prevent use of engines marked as disabled by hw/vbios - LP: #1158689 * rtlwifi: btcoexist: Add new mini driver - LP: #1296591 * rtlwifi: Prepare existing drivers for new driver - LP: #1296591 * rtlwifi: add MSI interrupts mode support - LP: #1296591 * rtlwifi: rtl8188ee: enable MSI interrupts mode - LP: #1296591 [ Upstream Kernel Changes ] * rebase to v3.13.9 -- Tim GardnerFri, 04 Apr 2014 09:26:27 -0400 ** Changed in: linux (Ubuntu Trusty) Status: Fix Committed => Fix Released ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2014-2678 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Trusty: Fix Released Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: == Fix == Build the correct dtb for this board and disable the console-over-jtag or Apply the attached patches, recompile and install. == Impact == Kernel hangs at boot. == Test Case == Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date:
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Tags added: patch -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Fix Committed Status in “linux” source package in Trusty: Fix Committed Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: == Fix == Build the correct dtb for this board and disable the console-over-jtag or Apply the attached patches, recompile and install. == Impact == Kernel hangs at boot. == Test Case == Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Also affects: linux (Ubuntu Trusty) Importance: High Assignee: Paolo Pisati (p-pisati) Status: In Progress ** Changed in: linux (Ubuntu Trusty) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Fix Committed Status in “linux” source package in Trusty: Fix Committed Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: == Fix == Build the correct dtb for this board and disable the console-over-jtag or Apply the attached patches, recompile and install. == Impact == Kernel hangs at boot. == Test Case == Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Changed in: linux (Ubuntu) Status: Confirmed => In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: In Progress Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: == Fix == Build the correct dtb for this board and disable the console-over-jtag or Apply the attached patches, recompile and install. == Impact == Kernel hangs at boot. == Test Case == Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
linux-image-3.13.0-24-generic_3.13.0-24.46~hvcdcc_armhf.deb verified as working, both directly and via u-boot, thank you. And thanks for including the DTB in the package now. I was using vexpress-v2p-ca9.dtb, but IIRC I compiled it from vanilla sometime last year. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: == Fix == Build the correct dtb for this board and disable the console-over-jtag or Apply the attached patches, recompile and install. == Impact == Kernel hangs at boot. == Test Case == Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Patch added: "0002-UBUNTU-Config-disable-HVC_DCC.patch" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+attachment/4075172/+files/0002-UBUNTU-Config-disable-HVC_DCC.patch ** Description changed: + == SRU Justification == + Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: + + == Fix == + + Build the correct dtb for this board and disable the console-over-jtag + + or + + Apply the attached patches, recompile and install. + + == Impact == + + Kernel hangs at boot. + + == Test Case == + + Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 - Hit any key to stop autoboot: 0 + Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 -Booting using the fdt blob at 0x62008000 -Using Device Tree in place at 62008000, end 6200de56 + Booting using the fdt blob at 0x62008000 + Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ - -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ - -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ - -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 + -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ + -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ + -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: - + Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: - + ProcEnviron: - TERM=xterm - PATH=(custom, no user) - XDG_RUNTIME_DIR= - LANG=en_US.UTF-8 - SHELL=/bin/bash + TERM=xterm + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash ProcFB: - + ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: - linux-restricted-modules-3.11.0-19-generic N/A - linux-backports-modules-3.11.0-19-generic N/A - linux-firmware 1.127 + linux-restricted-modules-3.11.0-19-generic N/A + linux-backports-modules-3.11.0-19-generic N/A + linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trus
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Patch added: "0001-UBUNTU-Config-build-vexpress-a9-dtb.patch" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+attachment/4075171/+files/0001-UBUNTU-Config-build-vexpress-a9-dtb.patch -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: == SRU Justification == Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: == Fix == Build the correct dtb for this board and disable the console-over-jtag or Apply the attached patches, recompile and install. == Impact == Kernel hangs at boot. == Test Case == Try booting your installation with and without those fixes. === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
can you try this kernel? http://people.canonical.com/~ppisati/1303657/linux- image-3.13.0-24-generic_3.13.0-24.46~hvcdcc_armhf.deb moreover, there's a dtb for this "board" at: /lib/firmware/3.13.0-24-generic/device-tree/vexpress-v2p-ca9.dtb -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
i added the dtb to the archive, and disable the "console via JTAG" that already gave us problem in the past - that should make it. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Tags removed: kernel-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
Recent distros can silently hang due to insufficient RAM while decompressing kernel image. Did you give enough RAM? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Paolo Pisati (p-pisati) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linux-restricted-modules-3.11.0-19-generic N/A linux-backports-modules-3.11.0-19-generic N/A linux-firmware 1.127 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-04-07 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1303657/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1303657] Re: Cannot boot trusty kernel on qemu-system-arm
FWIW, I was not able to compile the armhf package from http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-trusty/: CC [M] drivers/gpu/drm/msm/msm_drv.o CC [M] drivers/gpu/drm/msm/msm_fb.o CC [M] drivers/gpu/drm/msm/msm_gem.o CC [M] drivers/gpu/drm/msm/msm_gem_prime.o CC [M] drivers/gpu/drm/msm/msm_gem_submit.o CC [M] drivers/gpu/drm/msm/msm_gpu.o CC [M] drivers/gpu/drm/msm/msm_iommu.o CC [M] drivers/gpu/drm/msm/msm_ringbuffer.o CC [M] drivers/gpu/drm/msm/msm_fbdev.o LD [M] drivers/gpu/drm/msm/msm.o drivers/gpu/drm/msm/hdmi/hdmi.o: In function `.LANCHOR2': hdmi.c:(.rodata+0x10): multiple definition of `__mod_of_device_table' drivers/gpu/drm/msm/adreno/a3xx_gpu.o:a3xx_gpu.c:(.rodata+0x4e8): first defined here drivers/gpu/drm/msm/msm_drv.o: In function `.LANCHOR0': msm_drv.c:(.rodata+0x20c): multiple definition of `__mod_of_device_table' drivers/gpu/drm/msm/adreno/a3xx_gpu.o:a3xx_gpu.c:(.rodata+0x4e8): first defined here make[6]: *** [drivers/gpu/drm/msm/msm.o] Error 1 make[5]: *** [drivers/gpu/drm/msm] Error 2 make[4]: *** [drivers/gpu/drm] Error 2 make[3]: *** [drivers/gpu] Error 2 make[2]: *** [drivers] Error 2 make[1]: *** [sub-make] Error 2 make[1]: Leaving directory `/home/ryan/v3.14-trusty/linux-3.14' make: *** [/home/ryan/v3.14-trusty/linux-3.14/debian/stamps/stamp-build-generic] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2 debuild: fatal error at line 1364: dpkg-buildpackage -rfakeroot -D -us -uc failed real447m6.844s user385m56.960s sys 36m20.700s -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1303657 Title: Cannot boot trusty kernel on qemu-system-arm Status in “linux” package in Ubuntu: Confirmed Bug description: Upon d-r-u of a qemu ARM guest from saucy to trusty, the kernel no longer boots: === U-Boot 2013.10 (Nov 23 2013 - 04:30:10) DRAM: 1 GiB WARNING: Caches not enabled Flash: 256 MiB MMC: MMC: 0 In:serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 reading boot.scr 352 bytes read in 28 ms (11.7 KiB/s) ## Executing script at 6000 reading vmlinuz 5474584 bytes read in 958 ms (5.4 MiB/s) reading initrd.img 17883834 bytes read in 3013 ms (5.7 MiB/s) reading board.dtb 11863 bytes read in 6 ms (1.9 MiB/s) Kernel image @ 0x60008000 [ 0x00 - 0x538918 ] ## Flattened Device Tree blob at 62008000 Booting using the fdt blob at 0x62008000 Using Device Tree in place at 62008000, end 6200de56 Starting kernel ... === At this point, the host CPU just spins. The previous kernel from saucy (3.11.0-19-generic) boots correctly into the trusty environment. The VM is being launched as so: export QEMU_AUDIO_DRV=none exec qemu-system-arm -display none -M vexpress-a9 -kernel /srv/arm-dev/u-boot -m 1024 \ -serial stdio -net nic,model=lan9118,macaddr=52:54:00:68:90:14 \ -net tap,ifname=arm-dev,script=no,downscript=no -sd /dev/mapper/host-arm_dev \ -pflash /srv/arm-dev/pflash1.img -pflash /srv/arm-dev/pflash2.img -smp 1 The flash images are unused; the scr points to the SD: fatload mmc 0:1 0x60008000 vmlinuz fatload mmc 0:1 0x61008000 initrd.img fatload mmc 0:1 0x62008000 board.dtb setenv bootargs console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp setenv fdt_high 0x setenv initrd_high 0x bootz 0x60008000 0x61008000:0x100 0x62008000 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-23-generic 3.13.0-23.45 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic armv7l AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu1 Architecture: armhf ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CurrentDmesg: [ 113.007517] init: plymouth-upstart-bridge main process ended, respawning Date: Mon Apr 7 01:23:13 2014 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lspci: Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 PciMultimedia: ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: console=ttyAMA0,38400 root=/dev/mmcblk0p2 nosmp RelatedPackageVersions: linu
