[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
This bug was fixed in the package alsa-lib - 1.2.2-2.1ubuntu2.1 --- alsa-lib (1.2.2-2.1ubuntu2.1) focal; urgency=medium * d/p/0001-ucm-add-a-check-for-the-empty-configuration.patch - Fix the failure on init the HDA-Intel sound card, because there is no init mixer values in the ucm, the alsa-lib should return error and then let alsautils init this sound card in the legacy HDA way. (LP: #1897934) -- Hui Wang Thu, 22 Oct 2020 11:50:50 +0100 ** Changed in: alsa-lib (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Released Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
Verified focal version 1.2.2-2.1ubuntu2.1 on the machine with legacy HDA audio design: Installed the alsa-utils 1.2.2-1ubuntu2, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Installed the proposed libasound2 1.2.2-2.1ubuntu2.1, repeat the above steps, the audio is not muted anymore. Verified Pass on the machine with legacy HDA audio design. ** Tags removed: verification-needed verification-needed-focal ** Tags added: verification-done verification-done-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
About the #72, I opened the URL, can't find any error on asterisk/1:16.2.1~dfsg-2ubuntu1 (armhf) introduced by new alsa-lib (1.2.2-2.1ubuntu2.1), looks like rebuild make the error disappear. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
Hello fossfreedom, or anyone else affected, Accepted alsa-lib into focal-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/alsa- lib/1.2.2-2.1ubuntu2.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- focal to verification-done-focal. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-focal. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Tags added: verification-needed verification-needed-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
Because there is an alsa-lib SRU for focal in the queue already (#1899857), I will submit the SRU of this bug for focal after #1899857 is put in the -proposed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
** Changed in: ubuntu-release-notes Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: Invalid Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
This is confirmed working correctly on Ubuntu MATE with 20201022 re- spin. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
I can confirm that sound is no longer muted for the ISO and is not muted on installation. So thanks and congrats! On Thu, 22 Oct 2020, 14:30 Launchpad Bug Tracker, < 1897...@bugs.launchpad.net> wrote: > This bug was fixed in the package alsa-lib - 1.2.3.2-1ubuntu3 > > --- > alsa-lib (1.2.3.2-1ubuntu3) groovy; urgency=medium > > * d/p/0001-ucm-add-a-check-for-the-empty-configuration.patch > - Fix the failure on init the HDA-Intel sound card, because there > is no init mixer values in the ucm, the alsa-lib should return > error and then let alsautils init this sound card in the legacy > HDA way. (LP: #1897934) > > -- Hui Wang Thu, 22 Oct 2020 16:46:14 +0800 > > ** Changed in: alsa-lib (Ubuntu Groovy) >Status: Fix Committed => Fix Released > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1897934 > > Title: > [SRU][Intel HDA] The initial sound level is set to zero (muted) > > Status in Release Notes for Ubuntu: > New > Status in alsa-lib package in Ubuntu: > Fix Released > Status in alsa-lib source package in Focal: > Fix Committed > Status in alsa-lib source package in Groovy: > Fix Released > > Bug description: > [Impact] > Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this > results in the failure on setting the init mixer values for HDA sound > card, and users experience the mute of audio after installing the > 20.10. > > [Fix] > Backport a patch from the latest alsa-lib (v1.2.3+) > > [Test] > Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm > /var/lib/alsa/*; > sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is > muted. > > Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm > /var/lib/alsa/*; > sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is > not muted. > > [Regression Potential] > This could make the ucm audio fail to initialize, but this possibility is > very low, since this patch is from upstream, and I tested on a ucm based > machine, the audio is good. > > > On boot into the live session - or on first install the sound level is > muted. > > I have to use GNOME Control Center - Sounds to change to an > appropriate level. Once changed the level chosen is correctly > retained between reboots. > > This appears to be a regression from 20.04 where the sound level was > set to - I guess - 80% on the live-session/first install > > ProblemType: BugDistroRelease: Ubuntu 20.10 > Package: pulseaudio 1:13.99.1-1ubuntu11 > ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 > Uname: Linux 5.8.0-20-generic x86_64 > NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair > ApportVersion: 2.20.11-0ubuntu48 > Architecture: amd64 > AudioDevicesInUse: >USERPID ACCESS COMMAND >/dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio > CasperMD5CheckResult: pass > CasperVersion: 1.452 > CurrentDesktop: Budgie:GNOME > Date: Wed Sep 30 16:03:08 2020 > LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 > (20200930) > ProcEnviron: >TERM=xterm-256color >PATH=(custom, no user) >XDG_RUNTIME_DIR= >LANG=en_US.UTF-8 >SHELL=/bin/bashSourcePackage: pulseaudio > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 02/15/2016 > dmi.bios.release: 15.31 > dmi.bios.vendor: Insyde > dmi.bios.version: F.1F > dmi.board.asset.tag: Type2 - Board Asset Tag > dmi.board.name: 80BF > dmi.board.vendor: HP > dmi.board.version: 95.16 > dmi.chassis.asset.tag: Chassis Asset Tag > dmi.chassis.type: 10 > dmi.chassis.vendor: HP > dmi.chassis.version: Chassis Version > dmi.ec.firmware.release: 95.22 > dmi.modalias: > dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: > dmi.product.family: 103C_5335KV G=N L=CON B=HP > dmi.product.name: HP Notebook > dmi.product.sku: N9S73EA#ABU > dmi.sys.vendor: HP > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-l
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
This bug was fixed in the package alsa-lib - 1.2.3.2-1ubuntu3 --- alsa-lib (1.2.3.2-1ubuntu3) groovy; urgency=medium * d/p/0001-ucm-add-a-check-for-the-empty-configuration.patch - Fix the failure on init the HDA-Intel sound card, because there is no init mixer values in the ucm, the alsa-lib should return error and then let alsautils init this sound card in the legacy HDA way. (LP: #1897934) -- Hui Wang Thu, 22 Oct 2020 16:46:14 +0800 ** Changed in: alsa-lib (Ubuntu Groovy) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Released Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Released Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
ah I see, OK - I will upload, thanks! can you update the test case to say that this version of alsa-utils is needed please? maybe provide a PPA link for people to install it with, until that is accepted into focal? ** Changed in: alsa-lib (Ubuntu Focal) Status: Incomplete => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: Fix Committed Status in alsa-lib source package in Groovy: Fix Committed Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
@Iain, For focal, after we merge this SRU: https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/1899745, we will have this bug too. But for focal, the #1899745 will not be in the iso, so users will not notice this problem. If we merge #1899745 to 20.04.2 iso, users will meet this bug. So for focal, this fix is not very urgent, even we merge the #1899745, it will not introduce this issue immediately. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: Incomplete Status in alsa-lib source package in Groovy: Fix Committed Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
(the upload got rejected since it was already uploaded by someone who didn't bother updating the bug) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: Incomplete Status in alsa-lib source package in Groovy: Fix Committed Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
I don't see the same problem on the Focal ISO - do we need to fix this in Focal? ** Changed in: alsa-lib (Ubuntu Focal) Status: In Progress => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: Incomplete Status in alsa-lib source package in Groovy: Fix Committed Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
Thanks Hui, I've sponsored the fix to G, let's see how it goes there ** Changed in: alsa-lib (Ubuntu Groovy) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: Fix Committed Status in alsa-lib source package in Focal: In Progress Status in alsa-lib source package in Groovy: Fix Committed Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
The debdiff for focal, let us wait for groovy to be tested and pass. ** Description changed: - On boot into the live session - or on first install the sound level is + [Impact] + Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this + results in the failure on setting the init mixer values for HDA sound + card, and users experience the mute of audio after installing the 20.10. + + [Fix] + Backport a patch from the latest alsa-lib (v1.2.3+) + + [Test] + Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; + sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. + + Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; + sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is + not muted. + + [Regression Potential] + This could make the ucm audio fail to initialize, but this possibility is + very low, since this patch is from upstream, and I tested on a ucm based + machine, the audio is good. + + + On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: In Progress Status in alsa-lib source package in Focal: In Progress Status in alsa-lib source package in Groovy: In Progress Bug description: [Impact] Fail to run '/usr/sbin/alsactl restore' on the HDA-Intel machines, this results in the failure on setting the init mixer values for HDA sound card, and users experience the mute of audio after installing the 20.10. [Fix] Backport a patch from the latest alsa-lib (v1.2.3+) [Test] Without the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is muted. Install the patched alsa-lib, rm ~/.config/pulse/*;sudo rm /var/lib/alsa/*; sudo sh -c "echo b > /proc/sysrq-trigger", after booting up, the audio is not muted. [Regression Potential] This could make the ucm audio fail to initialize, but this possibility is very low, since this patch is from upstream, and I tested on a ucm based machine, the audio is good. On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F puls
[Kernel-packages] [Bug 1897934] Re: [SRU][Intel HDA] The initial sound level is set to zero (muted)
This is the debdiff for groovy. ** Summary changed: - [Intel HDA] The initial sound level is set to zero (muted) + [SRU][Intel HDA] The initial sound level is set to zero (muted) ** Patch added: "alsa-lib_1.2.3.2-1ubuntu3.debdiff" https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1897934/+attachment/5425419/+files/alsa-lib_1.2.3.2-1ubuntu3.debdiff -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/1897934 Title: [SRU][Intel HDA] The initial sound level is set to zero (muted) Status in Release Notes for Ubuntu: New Status in alsa-lib package in Ubuntu: In Progress Status in alsa-lib source package in Focal: In Progress Status in alsa-lib source package in Groovy: In Progress Bug description: On boot into the live session - or on first install the sound level is muted. I have to use GNOME Control Center - Sounds to change to an appropriate level. Once changed the level chosen is correctly retained between reboots. This appears to be a regression from 20.04 where the sound level was set to - I guess - 80% on the live-session/first install ProblemType: BugDistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.1-1ubuntu11 ProcVersionSignature: Ubuntu 5.8.0-20.21-generic 5.8.10 Uname: Linux 5.8.0-20-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu48 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-budgie 5041 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.452 CurrentDesktop: Budgie:GNOME Date: Wed Sep 30 16:03:08 2020 LiveMediaBuild: Ubuntu-Budgie 20.10 "Groovy Gorilla" - Beta amd64 (20200930) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bashSourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2016 dmi.bios.release: 15.31 dmi.bios.vendor: Insyde dmi.bios.version: F.1F dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80BF dmi.board.vendor: HP dmi.board.version: 95.16 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 95.22 dmi.modalias: dmi:bvnInsyde:bvrF.1F:bd02/15/2016:br15.31:efr95.22:svnHP:pnHPNotebook:pvr:rvnHP:rn80BF:rvr95.16:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP dmi.product.name: HP Notebook dmi.product.sku: N9S73EA#ABU dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1897934/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp