[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
This bug was fixed in the package linux-raspi - 6.7.0-1001.1 --- linux-raspi (6.7.0-1001.1) noble; urgency=medium * noble/linux-raspi: 6.7.0-1001.1 -proposed tracker (LP: #2051136) * Packaging resync (LP: #1786013) - [Packaging] update Ubuntu.md - [Packaging] update update.conf - debian/dkms-versions -- update from kernel-versions (main/d2024.01.02) * Remove linux-modules-extra (LP: #2048862) - [Packaging] raspi: Remove linux-modules-extra package * Make dwc2 the default (LP: #2048861) - SAUCE: ARM: dts: bcm27xx: Make dwc2 the default * Raspberry Pi 3B+ doesnt boot from USB on 23.10 Mantic (LP: #2039786) - SAUCE: Revert "usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub" * Missing overlays/README (LP: #1954757) - SAUCE: (no-up) Install overlays/README * [Raspberry Pi/lunar] systemd-oomd fails with "ConditionControlGroupController=memory was not met" (LP: #2017209) - SAUCE: Revert "cgroup: Disable cgroup "memory" by default" * Remove armhf support (LP: #2048864) - [Packaging] raspi: Remove armhf packages - [Packaging] raspi: Remove armhf ABI files * Miscellaneous Ubuntu changes - [Packaging] raspi: Initial import of debian.raspi from mantic:linux-raspi (6.5.0-1010.13) - [Packaging] raspi: Sync packaging files from debian.master - [Packaging] raspi: Initial version of linux-raspi for Noble - [Config] raspi: updateconfigs after rebase to Ubuntu-6.7.0-2.2 - [Config] raspi: Include master annotations - [Packaging] raspi: Disable all ABI checks - SAUCE: Revert "iommu: Retire map/unmap ops" - [Packaging] raspi: Import of upstream raspberrypi patchset - [Config] raspi: updateconfigs after import of rpi-6.6.y patchset - [Config] raspi: Set SWIOTLB_DYNAMIC=n - SAUCE: arm64: dts: broadcom: Remove downstream dt overlay support - SAUCE: (no-up) ARM: dts: Disable unsupported Raspberry Pi DTBs - SAUCE: ARM: dts: Fix broken symlinks - SAUCE: ARM: dts: overlays: Fix file permissions - [Packaging] raspi: Update reconstruct script * Miscellaneous upstream changes - raspberrypi-firmware: Update mailbox commands - drm/vc4: Add FKMS as an acceptable node for dma ranges. - drm/atomic: Don't fixup modes that haven't been reset - drm/vc4: Allow setting the TV norm via module parameter - drm/vc4: Add firmware-kms mode - drm/vc4: Add support for gamma on BCM2711 - drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries - drm/vc4: hvs: Force modeset on gamma lut change - drm/vc4: Relax VEC modeline requirements and add progressive mode support - drm/vc4: Make VEC progressive modes readily accessible - drm: Check whether the gamma lut has changed before updating - drm/vc4: Enable gamma block only when required. - drm/vc4: Only add gamma properties once. - drm/vc4: Validate the size of the gamma_lut - drm/vc4: Disable Gamma control on HVS5 due to issues writing the table - drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_* - drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors - vc4/drm: vc4_plane: Keep fractional source coords inside state - vc4/drm: Handle fractional coordinates using the phase field - drm: Add chroma siting properties - vc4/drm:plane: Make use of chroma siting parameter - drm/vc4: Force trigger of dlist update on margins change - drm/atomic-helpers: remove legacy_cursor_update hacks - drm/atomic: If margins are updated, update all planes. - drm/vc4: hvs: Skip DebugFS Registration for FKMS - drm/vc4_hdmi: Allow hotplug detect to be forced - vc4_hdmi: Avoid log spam for audio start failure - drm/vc4: hvs: Defer dlist slots deallocation - drm/vc4: hvs: Initialize the dlist allocation list entry - drm/vc4: hvs: Move the dlist allocation destruction to a function - drm/vc4: hvs: Destroy dlist allocations immediately when running a test - drm/vc4_plane: Add support for YUV444 formats - drm/vc4: Calculate bpc based on max_requested_bpc - drm/vc4: Set AXI panic modes for the HVS - drm/vc4: drop unnecessary and harmful HDMI RGB format check - drm/vc4: Limit max_bpc to 8 on Pi0-3 - arm64: setup: Fix build warning - BCM2708: Add core Device Tree support - config: Add default configs - clk-raspberrypi: Add ISP to exported clocks - Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer. - clk-bcm2835: Mark used PLLs and dividers CRITICAL - clk-bcm2835: Add claim-clocks property - clk-bcm2835: Read max core clock from firmware - clk: clk-bcm2835: Use %zd when printing size_t - clk-bcm2835: Don't wait for pllh lock
[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
This bug was fixed in the package linux-raspi - 5.15.0-1044.47 --- linux-raspi (5.15.0-1044.47) jammy; urgency=medium * jammy/linux-raspi: 5.15.0-1044.47 -proposed tracker (LP: #2041598) * [SRU][J/L/M] UBUNTU: [Packaging] Make WWAN driver a loadable module (LP: #2033406) - [Packaging] raspi: Make WWAN driver loadable modules * openvswitch fails on raspberry pi 4 (LP: #2040524) - [Packaging] raspi: Include openvswitch in linux-modules [ Ubuntu: 5.15.0-91.101 ] * jammy/linux: 5.15.0-91.101 -proposed tracker (LP: #2043452) * USB bus error after upgrading to proposed kernel on lunar and jammy (LP: #2043197) - USB: core: Fix oversight in SuperSpeed initialization [ Ubuntu: 5.15.0-90.100 ] * jammy/linux: 5.15.0-90.100 -proposed tracker (LP: #2041603) * CVE-2023-25775 - RDMA/irdma: Remove irdma_uk_mw_bind() - RDMA/irdma: Remove irdma_sc_send_lsmm_nostag() - RDMA/irdma: Remove irdma_cqp_up_map_cmd() - RDMA/irdma: Remove irdma_get_hw_addr() - RDMA/irdma: Make irdma_uk_cq_init() return a void - RDMA/irdma: optimize rx path by removing unnecessary copy - RDMA/irdma: Remove enum irdma_status_code - RDMA/irdma: Remove excess error variables - RDMA/irdma: Prevent zero-length STAG registration * CVE-2023-39189 - netfilter: nfnetlink_osf: avoid OOB read * SMC stats: Wrong bucket calculation for payload of exactly 4096 bytes (LP: #2039575) - net/smc: Fix pos miscalculation in statistics * CVE-2023-45871 - igb: set max size RX buffer when store bad packet is enabled * CVE-2023-39193 - netfilter: xt_sctp: validate the flag_info count * CVE-2023-39192 - netfilter: xt_u32: validate user space input * CVE-2023-31085 - ubi: Refuse attaching if mtd's erasesize is 0 * CVE-2023-5717 - perf: Disallow mis-matched inherited group reads * CVE-2023-5178 - nvmet-tcp: Fix a possible UAF in queue intialization setup * CVE-2023-5158 - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer() * [SRU][J/L/M] UBUNTU: [Packaging] Make WWAN driver a loadable module (LP: #2033406) - [Packaging] Make WWAN driver loadable modules * HP ProBook 450 G8 Notebook fail to wifi test (LP: #2037513) - iwlwifi: mvm: Don't fail if PPAG isn't supported - wifi: iwlwifi: fw: skip PPAG for JF * usbip: error: failed to open /usr/share/hwdata//usb.ids (LP: #2039439) - [Packaging] Make linux-tools-common depend on hwdata * scripts/pahole-flags.sh change return to exit 0 (LP: #2035123) - SAUCE: scripts/pahole-flags.sh change return to exit 0 * Unable to use nvme drive to install Ubuntu 23.10 (LP: #2040157) - misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe * Jammy update: v5.15.131 upstream stable release (LP: #2039610) - erofs: ensure that the post-EOF tails are all zeroed - ksmbd: fix wrong DataOffset validation of create context - ksmbd: replace one-element array with flex-array member in struct smb2_ea_info - ARM: pxa: remove use of symbol_get() - mmc: au1xmmc: force non-modular build and remove symbol_get usage - net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index - rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff - modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules - USB: serial: option: add Quectel EM05G variant (0x030e) - USB: serial: option: add FOXCONN T99W368/T99W373 product - ALSA: usb-audio: Fix init call orders for UAC1 - usb: dwc3: meson-g12a: do post init to fix broken usb after resumption - usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 - HID: wacom: remove the battery when the EKR is off - staging: rtl8712: fix race condition - Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition - wifi: mt76: mt7921: do not support one stream on secondary antenna only - serial: qcom-geni: fix opp vote on shutdown - serial: sc16is7xx: fix broken port 0 uart init - serial: sc16is7xx: fix bug when first setting GPIO direction - firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe - fsi: master-ast-cf: Add MODULE_FIRMWARE macro - tcpm: Avoid soft reset when partner does not support get_status - nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers() - nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse - pinctrl: amd: Don't show `Invalid config param` errors - usb: typec: tcpci: move tcpci.h to include/linux/usb/ - usb: typec: tcpci: clear the fault status bit - Linux 5.15.131 * Jammy update: v5.15.130 upstream stable release (LP: #2039608) - ACPI: thermal: Drop nocrt parameter - module: Expose module_init_layout_section() - arm64: module-plts: inline linux/moduleloader.h - arm64: module: Use module_init_layout_section() to spot init sections - ARM: module: Use
[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
This bug was fixed in the package linux-raspi - 6.5.0-1008.11 --- linux-raspi (6.5.0-1008.11) mantic; urgency=medium * mantic/linux-raspi: 6.5.0-1008.11 -proposed tracker (LP: #2041533) * Packaging resync (LP: #1786013) - [Packaging] resync update-dkms-versions helper - debian/dkms-versions -- update from kernel-versions (main/2023.10.30) * drop all references to is_rust_module.sh in kernels >= 6.5 (LP: #2038611) - [Packaging] raspi: drop references to is_rust_module.sh * Unnecessary armhf DTB (LP: #2039431) - [Config] raspi: Set ARCH_BRCMSTB=n for armhf * disable shiftfs (LP: #2038522) - [Config] raspi: disable shiftfs * openvswitch fails on raspberry pi 4 (LP: #2040524) - [Packaging] raspi: Include openvswitch in linux-modules * Fan speed control not working on Pi 5 under Ubuntu 23.10 (LP: #2041741) - driver: thermal: step_wise: Fix uninitialized variable * Raspberry Pi 3B+ doesnt boot from USB on 23.10 Mantic (LP: #2039786) - SAUCE: Revert "usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub" [ Ubuntu: 6.5.0-14.14 ] * mantic/linux: 6.5.0-14.14 -proposed tracker (LP: #2042660) * Boot log print hang on screen, no login prompt on Aspeed 2600 rev 52 BMC (LP: #2042850) - drm/ast: Add BMC virtual connector * arm64 atomic issues cause disk corruption (LP: #2042573) - locking/atomic: scripts: fix fallback ifdeffery * Packaging resync (LP: #1786013) - [Packaging] update annotations scripts [ Ubuntu: 6.5.0-12.12 ] * mantic/linux: 6.5.0-12.12 -proposed tracker (LP: #2041536) * Packaging resync (LP: #1786013) - [Packaging] update annotations scripts - [Packaging] update helper scripts - debian/dkms-versions -- update from kernel-versions (main/2023.10.30) * CVE-2023-5633 - drm/vmwgfx: Keep a gem reference to user bos in surfaces * CVE-2023-5345 - fs/smb/client: Reset password pointer to NULL * CVE-2023-39189 - netfilter: nfnetlink_osf: avoid OOB read * CVE-2023-4244 - netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction * apparmor restricts read access of user namespace mediation sysctls to root (LP: #2040194) - SAUCE: apparmor: open userns related sysctl so lxc can check if restriction are in place * AppArmor spams kernel log with assert when auditing (LP: #2040192) - SAUCE: apparmor: fix request field from a prompt reply that denies all access * apparmor notification files verification (LP: #2040250) - SAUCE: apparmor: fix notification header size * apparmor oops when racing to retrieve a notification (LP: #2040245) - SAUCE: apparmor: fix oops when racing to retrieve notification * SMC stats: Wrong bucket calculation for payload of exactly 4096 bytes (LP: #2039575) - net/smc: Fix pos miscalculation in statistics * Support mipi camera on Intel Meteor Lake platform (LP: #2031412) - SAUCE: iommu: intel-ipu: use IOMMU passthrough mode for Intel IPUs on Meteor Lake - SAUCE: platform/x86: int3472: Add handshake GPIO function * CVE-2023-45898 - ext4: fix slab-use-after-free in ext4_es_insert_extent() * CVE-2023-31085 - ubi: Refuse attaching if mtd's erasesize is 0 * CVE-2023-5717 - perf: Disallow mis-matched inherited group reads * CVE-2023-5178 - nvmet-tcp: Fix a possible UAF in queue intialization setup * CVE-2023-5158 - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer() * CVE-2023-5090 - x86: KVM: SVM: always update the x2avic msr interception * [SRU][J/L/M] UBUNTU: [Packaging] Make WWAN driver a loadable module (LP: #2033406) - [Packaging] Make WWAN driver loadable modules * Unable to power off the system with MTL CPU (LP: #2039405) - Revert "x86/smp: Put CPUs into INIT on shutdown if possible" * usbip: error: failed to open /usr/share/hwdata//usb.ids (LP: #2039439) - [Packaging] Make linux-tools-common depend on hwdata * drop all references to is_rust_module.sh in kernels >= 6.5 (LP: #2038611) - [Packaging] drop references to is_rust_module.sh * disable shiftfs (LP: #2038522) - SAUCE: ceph: enable unsafe idmapped mounts by default - [Config] disable shiftfs * Infinite systemd loop when power off the machine with multiple MD RAIDs (LP: #2036184) - md: Put the right device in md_seq_next * [Mediatek] mt8195-demo: enable CONFIG_MTK_IOMMU as module for multimedia and PCIE peripherals (LP: #2036587) - [Config] Enable CONFIG_MTK_IOMMU on arm64 * Realtek 8852CE WiFi 6E country code udpates (LP: #2037273) - wifi: rtw89: regd: update regulatory map to R64-R43 * Unable to use nvme drive to install Ubuntu 23.10 (LP: #2040157) - misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe * CVE-2023-42754 - ipv4: fix null-deref in ipv4_link_failure * linux-*: please enable dm-verity kconfigs to allow MoK/db verified root
[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
This bug was fixed in the package linux-raspi - 6.2.0-1018.20 --- linux-raspi (6.2.0-1018.20) lunar; urgency=medium * lunar/linux-raspi: 6.2.0-1018.20 -proposed tracker (LP: #2041550) * openvswitch fails on raspberry pi 4 (LP: #2040524) - [Packaging] raspi: Include openvswitch in linux-modules [ Ubuntu: 6.2.0-39.40 ] * lunar/linux: 6.2.0-39.40 -proposed tracker (LP: #2043451) * USB bus error after upgrading to proposed kernel on lunar and jammy (LP: #2043197) - USB: core: Fix oversight in SuperSpeed initialization * Include cifs.ko in linux-modules package (LP: #2042546) - [Packaging] Replace fs/cifs with fs/smb/client in inclusion list [ Ubuntu: 6.2.0-38.39 ] * lunar/linux: 6.2.0-38.39 -proposed tracker (LP: #2041557) * CVE-2023-25775 - RDMA/irdma: Prevent zero-length STAG registration * CVE-2023-5345 - fs/smb/client: Reset password pointer to NULL * CVE-2023-39189 - netfilter: nfnetlink_osf: avoid OOB read * SMC stats: Wrong bucket calculation for payload of exactly 4096 bytes (LP: #2039575) - net/smc: Fix pos miscalculation in statistics * [SRU][J/L/M] UBUNTU: [Packaging] Make WWAN driver a loadable module (LP: #2033406) - [Packaging] Make WWAN driver loadable modules * CVE-2023-45871 - igb: set max size RX buffer when store bad packet is enabled * CVE-2023-39193 - netfilter: xt_sctp: validate the flag_info count * CVE-2023-39192 - netfilter: xt_u32: validate user space input * CVE-2023-31085 - ubi: Refuse attaching if mtd's erasesize is 0 * CVE-2023-5717 - perf: Disallow mis-matched inherited group reads * CVE-2023-5178 - nvmet-tcp: Fix a possible UAF in queue intialization setup * CVE-2023-5158 - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer() * CVE-2023-5090 - x86: KVM: SVM: always update the x2avic msr interception * usbip: error: failed to open /usr/share/hwdata//usb.ids (LP: #2039439) - [Packaging] Make linux-tools-common depend on hwdata * Unable to use nvme drive to install Ubuntu 23.10 (LP: #2040157) - misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe * Lunar update: upstream stable patchset 2023-10-19 (LP: #2039884) - ACPI: thermal: Drop nocrt parameter - module: Expose module_init_layout_section() - arm64: module-plts: inline linux/moduleloader.h - arm64: module: Use module_init_layout_section() to spot init sections - ARM: module: Use module_init_layout_section() to spot init sections - lockdep: fix static memory detection even more - parisc: Cleanup mmap implementation regarding color alignment - parisc: sys_parisc: parisc_personality() is called from asm code - io_uring/parisc: Adjust pgoff in io_uring mmap() for parisc - kallsyms: Fix kallsyms_selftest failure - module/decompress: use vmalloc() for zstd decompression workspace - Upstream stable to v6.1.51, v6.4.14 - erofs: ensure that the post-EOF tails are all zeroed - ksmbd: fix wrong DataOffset validation of create context - ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob() - ksmbd: replace one-element array with flex-array member in struct smb2_ea_info - ksmbd: reduce descriptor size if remaining bytes is less than request size - ARM: pxa: remove use of symbol_get() - mmc: au1xmmc: force non-modular build and remove symbol_get usage - net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index - rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff - modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules - USB: serial: option: add Quectel EM05G variant (0x030e) - USB: serial: option: add FOXCONN T99W368/T99W373 product - ALSA: usb-audio: Fix init call orders for UAC1 - usb: dwc3: meson-g12a: do post init to fix broken usb after resumption - usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 - HID: wacom: remove the battery when the EKR is off - staging: rtl8712: fix race condition - Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition - wifi: mt76: mt7921: do not support one stream on secondary antenna only - wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU - serial: qcom-geni: fix opp vote on shutdown - serial: sc16is7xx: fix broken port 0 uart init - serial: sc16is7xx: fix bug when first setting GPIO direction - firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe - fsi: master-ast-cf: Add MODULE_FIRMWARE macro - tcpm: Avoid soft reset when partner does not support get_status - dt-bindings: sc16is7xx: Add property to change GPIO function - nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers() - nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse - usb: typec: tcpci: clear the fault status bit - pinctrl: amd: Don't show `Invalid config
[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
** Changed in: linux-raspi (Ubuntu) Status: Incomplete => Confirmed ** Changed in: linux-raspi (Ubuntu) Status: Confirmed => New ** Description changed: + [Impact] + + microovn snap is not working. + + [Fix] + + Add openvswitch module to linux-modules. + + [Test Case] + + See 'Original description' below. + + [Regression Potential] + + Just moving a kernel module which might be loaded on more systems now. + If bad, the usual kernel freezes/crashes/... + + [Original Descritption] + I have a homelab and I'm experimenting with adding arm nodes to my existing cluster. MicroOVN works fine on my x86_64 nodes but fails on my arm nodes (raspberry pi 4). I am using microovn 22.03/stable (rev 295). When I run "microovn init" on the arm nodes, I get the error Error: Post "http://control.socket/cluster/control": context deadline exceeded The output from "snap services microovn" is: Service Startup Current Notes microovn.central disabled inactive - microovn.chassis enabled active- microovn.daemon enabled active- microovn.ovn-northd disabled inactive - microovn.ovn-ovsdb-server-nb disabled inactive - microovn.ovn-ovsdb-server-sb disabled inactive - microovn.refresh-expiring-certs enabled inactive timer-activated microovn.switch enabled inactive - The output from "systemctl | grep ovn" is: - run-snapd-ns-microovn.mnt.mount loaded active mounted /run/snapd/ns/microovn.mnt - snap-microovn-301.mount loaded active mounted Mount unit for microovn, revision 301 - snap.microovn.chassis.service loaded active running Service for snap application microovn.chassis - snap.microovn.daemon.service loaded active running Service for snap application microovn.daemon + run-snapd-ns-microovn.mnt.mount loaded active mounted /run/snapd/ns/microovn.mnt + snap-microovn-301.mount loaded active mounted Mount unit for microovn, revision 301 + snap.microovn.chassis.service loaded active running Service for snap application microovn.chassis + snap.microovn.daemon.service loaded active running Service for snap application microovn.daemon ● snap.microovn.switch.service loaded failed failedService for snap application microovn.switch - snap.microovn.refresh-expiring-certs.timer loaded active waiting Timer refresh-expiring-certs for snap application microovn.refresh-expiring-certs + snap.microovn.refresh-expiring-certs.timer loaded active waiting Timer refresh-expiring-certs for snap application microovn.refresh-expiring-certs The output from "journalctl -b -u snap.microovn.switch.service" is (in relevant part): Oct 25 10:55:27 pi01 systemd[1]: Started Service for snap application microovn.switch. Oct 25 10:55:28 pi01 microovn.switch[7315]: * /var/snap/microovn/common/data/switch/db/conf.db does not exist Oct 25 10:55:28 pi01 microovn.switch[7315]: * Creating empty database /var/snap/microovn/common/data/switch/db/conf.db Oct 25 10:55:28 pi01 microovn.switch[7315]: * Starting ovsdb-server Oct 25 10:55:28 pi01 ovs-vsctl[7338]: ovs|1|vsctl|INFO|Called as ovs-vsctl --no-wait -- init -- set Open_vSwitch . db-version=8.3.0 Oct 25 10:55:28 pi01 ovs-vsctl[7348]: ovs|1|vsctl|INFO|Called as ovs-vsctl --no-wait set Open_vSwitch . ovs-version=2.17.7 "external-ids:system-id=\"pi01\"" "external-ids:rundir=\"/var/snap/microovn/> Oct 25 10:55:28 pi01 microovn.switch[7315]: * Configuring Open vSwitch system IDs Oct 25 10:55:28 pi01 microovn.switch[7380]: /snap/microovn/301/share/openvswitch/scripts/ovs-kmod-ctl: 112: modprobe: Permission denied ** Changed in: linux-raspi (Ubuntu) Status: New => Confirmed ** Project changed: microovn => linux (Ubuntu) ** Package changed: linux-raspi (Ubuntu) => microovn ** Project changed: microovn => linux-raspi (Ubuntu) ** Also affects: linux (Ubuntu Mantic) Importance: Undecided Status: New ** Also affects: linux-raspi (Ubuntu Mantic) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Lunar) Importance: Undecided Status: New **
[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
Is the openvswitch module (and its dependencies) the only modules that is required from -extra or are there others? Can you post the output of lsmod? ** Changed in: linux-raspi (Ubuntu) Status: New => Incomplete ** Changed in: microovn Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi in Ubuntu. https://bugs.launchpad.net/bugs/2040524 Title: openvswitch fails on raspberry pi 4 Status in microovn: Invalid Status in linux-raspi package in Ubuntu: Incomplete Bug description: I have a homelab and I'm experimenting with adding arm nodes to my existing cluster. MicroOVN works fine on my x86_64 nodes but fails on my arm nodes (raspberry pi 4). I am using microovn 22.03/stable (rev 295). When I run "microovn init" on the arm nodes, I get the error Error: Post "http://control.socket/cluster/control": context deadline exceeded The output from "snap services microovn" is: Service Startup Current Notes microovn.central disabled inactive - microovn.chassis enabled active- microovn.daemon enabled active- microovn.ovn-northd disabled inactive - microovn.ovn-ovsdb-server-nb disabled inactive - microovn.ovn-ovsdb-server-sb disabled inactive - microovn.refresh-expiring-certs enabled inactive timer-activated microovn.switch enabled inactive - The output from "systemctl | grep ovn" is: run-snapd-ns-microovn.mnt.mount loaded active mounted /run/snapd/ns/microovn.mnt snap-microovn-301.mount loaded active mounted Mount unit for microovn, revision 301 snap.microovn.chassis.service loaded active running Service for snap application microovn.chassis snap.microovn.daemon.service loaded active running Service for snap application microovn.daemon ● snap.microovn.switch.service loaded failed failedService for snap application microovn.switch snap.microovn.refresh-expiring-certs.timer loaded active waiting Timer refresh-expiring-certs for snap application microovn.refresh-expiring-certs The output from "journalctl -b -u snap.microovn.switch.service" is (in relevant part): Oct 25 10:55:27 pi01 systemd[1]: Started Service for snap application microovn.switch. Oct 25 10:55:28 pi01 microovn.switch[7315]: * /var/snap/microovn/common/data/switch/db/conf.db does not exist Oct 25 10:55:28 pi01 microovn.switch[7315]: * Creating empty database /var/snap/microovn/common/data/switch/db/conf.db Oct 25 10:55:28 pi01 microovn.switch[7315]: * Starting ovsdb-server Oct 25 10:55:28 pi01 ovs-vsctl[7338]: ovs|1|vsctl|INFO|Called as ovs-vsctl --no-wait -- init -- set Open_vSwitch . db-version=8.3.0 Oct 25 10:55:28 pi01 ovs-vsctl[7348]: ovs|1|vsctl|INFO|Called as ovs-vsctl --no-wait set Open_vSwitch . ovs-version=2.17.7 "external-ids:system-id=\"pi01\"" "external-ids:rundir=\"/var/snap/microovn/> Oct 25 10:55:28 pi01 microovn.switch[7315]: * Configuring Open vSwitch system IDs Oct 25 10:55:28 pi01 microovn.switch[7380]: /snap/microovn/301/share/openvswitch/scripts/ovs-kmod-ctl: 112: modprobe: Permission denied To manage notifications about this bug go to: https://bugs.launchpad.net/microovn/+bug/2040524/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2040524] Re: openvswitch fails on raspberry pi 4
** Also affects: linux-raspi (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi in Ubuntu. https://bugs.launchpad.net/bugs/2040524 Title: openvswitch fails on raspberry pi 4 Status in microovn: New Status in linux-raspi package in Ubuntu: New Bug description: I have a homelab and I'm experimenting with adding arm nodes to my existing cluster. MicroOVN works fine on my x86_64 nodes but fails on my arm nodes (raspberry pi 4). I am using microovn 22.03/stable (rev 295). When I run "microovn init" on the arm nodes, I get the error Error: Post "http://control.socket/cluster/control": context deadline exceeded The output from "snap services microovn" is: Service Startup Current Notes microovn.central disabled inactive - microovn.chassis enabled active- microovn.daemon enabled active- microovn.ovn-northd disabled inactive - microovn.ovn-ovsdb-server-nb disabled inactive - microovn.ovn-ovsdb-server-sb disabled inactive - microovn.refresh-expiring-certs enabled inactive timer-activated microovn.switch enabled inactive - The output from "systemctl | grep ovn" is: run-snapd-ns-microovn.mnt.mount loaded active mounted /run/snapd/ns/microovn.mnt snap-microovn-301.mount loaded active mounted Mount unit for microovn, revision 301 snap.microovn.chassis.service loaded active running Service for snap application microovn.chassis snap.microovn.daemon.service loaded active running Service for snap application microovn.daemon ● snap.microovn.switch.service loaded failed failedService for snap application microovn.switch snap.microovn.refresh-expiring-certs.timer loaded active waiting Timer refresh-expiring-certs for snap application microovn.refresh-expiring-certs The output from "journalctl -b -u snap.microovn.switch.service" is (in relevant part): Oct 25 10:55:27 pi01 systemd[1]: Started Service for snap application microovn.switch. Oct 25 10:55:28 pi01 microovn.switch[7315]: * /var/snap/microovn/common/data/switch/db/conf.db does not exist Oct 25 10:55:28 pi01 microovn.switch[7315]: * Creating empty database /var/snap/microovn/common/data/switch/db/conf.db Oct 25 10:55:28 pi01 microovn.switch[7315]: * Starting ovsdb-server Oct 25 10:55:28 pi01 ovs-vsctl[7338]: ovs|1|vsctl|INFO|Called as ovs-vsctl --no-wait -- init -- set Open_vSwitch . db-version=8.3.0 Oct 25 10:55:28 pi01 ovs-vsctl[7348]: ovs|1|vsctl|INFO|Called as ovs-vsctl --no-wait set Open_vSwitch . ovs-version=2.17.7 "external-ids:system-id=\"pi01\"" "external-ids:rundir=\"/var/snap/microovn/> Oct 25 10:55:28 pi01 microovn.switch[7315]: * Configuring Open vSwitch system IDs Oct 25 10:55:28 pi01 microovn.switch[7380]: /snap/microovn/301/share/openvswitch/scripts/ovs-kmod-ctl: 112: modprobe: Permission denied To manage notifications about this bug go to: https://bugs.launchpad.net/microovn/+bug/2040524/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
