[Kernel-packages] [Bug 2057960] Re: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4
Hello Kleber, I've installed the last kernel update (5.15.0-106.116) and it's solved the problem. Now FCoE interfaces are correctly detected and the system got storage disks access back. Regards, Anderson -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2057960 Title: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4 Status in linux package in Ubuntu: New Bug description: Since I've upgraded my server's to Ubuntu 22.04.4 I'm facing problems to make my fcoe setup to work correctly. Firstly, some context. We have a HPE Synergy appliance with a bunch of Synergy 480 Gen10 servers still running Ubuntu 20.04. Each 480 server has 4 QLogic BCM57840 NetXtreme II Ethernet Multi Function network adapters with two of them dedicated to storage communication through FCoE. Recently, I've upgraded one of them to Ubuntu 22.04 and realized that after the upgrade, all the Fibre Channel LUNs have disappeared. During the diagnostic process I noticed that both network (bnx2x) and fcoe (fcoe, bnx2fc) kernel drivers have been loaded properly, FCoE vlans were correctly detected by fcoe-utils, but there was no connection between the server and the storage and the server could not detect any LUN. I also noticed that fcoeadm was reporting the following status: # fcoeadm -i Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number:9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f2.4093-fco OS Device Name:host2 Node Name: 0x1a3d2725 Port Name: 0x1a3d2724 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0x State: Offline Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number:9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f3.4094-fco OS Device Name:host3 Node Name: 0x1a3d2727 Port Name: 0x1a3d2726 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0x State: Offline Although most of information displayed was correct, the port state was always offline (what explains no storage connectivity) and the FC-ID reported was 0x for both interfaces. Supposing that something went wrong during the upgrade process, I decided to make a fresh install of the server and, for my surprise, the fcoe ports went online and all luns were detected correctly. Unfortunately, the ports went offline again after a dist-upgrade. Trying to understand what was happening I performed another fresh install of the Ubuntu 22.04, but this time collecting some information about kernel and packages versions from before and after dist-upgrade. What I discovered was that all packages related (fcoe-utils, lldpad) had the same versions before and after, the only exception was the kernel itself. Before the dist-upgrade the kernel in use was 5.15.0-25-generic and after dist-upgrade the kernel was 5.15.0-100-generic. Suspecting a kernel problem I installed and booted different kernel versions from 5.15.0-25 and 5.15.0-100 and discovered that the problem probably was introduced with kernel 5.15.0-94, since it is the first version showing the describe behavior. Looking at the changelog of linux-modules package, I noticed some changes on fcoe and other scsi modules, right after the 5.15.0-91 version. Could those changes be the cause of the behavior observed on my server or just a coincidence? Is there any fix to it? Thanks in advance. Anderson ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-94-generic 5.15.0-94.104 ProcVersionSignature: Ubuntu 5.15.0-94.104-generic 5.15.136 Uname: Linux 5.15.0-94-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Mar 14 11:03 seq crw-rw 1 root audio 116, 33 Mar 14 11:03 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
Re: [Kernel-packages] [Bug 2057960] Re: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4
Hello, Kleber. Thank you for the instructions for installing the proposed kernel packages. Unfortunately, booting the system with the kernel 5.15.0-102.112 resulted in the same behavior, fcoe interfaces offline and reporting the FC-IDs as 0x. If you need further information, please let me know. Best regards, Anderson Soares Ferreira - anderson.soa...@embrapa.br Núcleo de Tecnologia da Informação - NTI Embrapa Territorial Tel.: (19) 3211-6200 Em qua., 3 de abr. de 2024 às 09:49, Kleber Sacilotto de Souza < 2057...@bugs.launchpad.net> escreveu: > Hello Anderson, > > Thank you for reporting the issue. We have a new kernel for 22.04 > (version 5.15.0-102.112) that is about to be released in the next few > days. Could you please test it again with this kernel and report the > results? You can either enable -proposed in your system and update the > kernel, or wait until it gets promoted to -updates and a simple dist- > upgrate will update the kernel. > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/2057960 > > Title: > Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4 > > Status in linux package in Ubuntu: > New > > Bug description: > Since I've upgraded my server's to Ubuntu 22.04.4 I'm facing problems > to make my fcoe setup to work correctly. > Firstly, some context. We have a HPE Synergy appliance with a bunch of > Synergy 480 Gen10 servers still running Ubuntu 20.04. > Each 480 server has 4 QLogic BCM57840 NetXtreme II Ethernet Multi > Function network adapters with two of them dedicated to storage > communication through FCoE. > > Recently, I've upgraded one of them to Ubuntu 22.04 and realized that > after the upgrade, all the Fibre Channel LUNs have disappeared. During the > diagnostic process I noticed that both network (bnx2x) and fcoe (fcoe, > bnx2fc) kernel drivers have been loaded properly, FCoE vlans were correctly > detected by fcoe-utils, but there was no connection between the server and > the storage and the server could not detect any LUN. > I also noticed that fcoeadm was reporting the following status: > > # fcoeadm -i > Description: BCM57840 NetXtreme II Ethernet Multi Function > Revision: 11 > Manufacturer: Broadcom Inc. and subsidiaries > Serial Number:9440C953B7F0 > > Driver: bnx2x Unknown > Number of Ports: 1 > > Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over > ens3f2.4093-fco > OS Device Name:host2 > Node Name: 0x1a3d2725 > Port Name: 0x1a3d2724 > Fabric Name: 0x0 > Speed: 20 Gbit > Supported Speed: 1 Gbit, 10 Gbit > MaxFrameSize: 2048 bytes > FC-ID (Port ID): 0x > State: Offline > Description: BCM57840 NetXtreme II Ethernet Multi Function > Revision: 11 > Manufacturer: Broadcom Inc. and subsidiaries > Serial Number:9440C953B7F0 > > Driver: bnx2x Unknown > Number of Ports: 1 > > Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over > ens3f3.4094-fco > OS Device Name:host3 > Node Name: 0x1a3d2727 > Port Name: 0x1a3d2726 > Fabric Name: 0x0 > Speed: 20 Gbit > Supported Speed: 1 Gbit, 10 Gbit > MaxFrameSize: 2048 bytes > FC-ID (Port ID): 0x > State: Offline > > Although most of information displayed was correct, the port state was > always offline (what explains no storage connectivity) and the FC-ID > reported was 0x for both interfaces. > > Supposing that something went wrong during the upgrade process, I > decided to make a fresh install of the server and, for my surprise, the > fcoe ports went online and all luns were detected correctly. > Unfortunately, the ports went offline again after a dist-upgrade. > Trying to understand what was happening I performed another fresh > install of the Ubuntu 22.04, but this time collecting some information > about kernel and packages versions from before and after dist-upgrade. > What I discovered was that all packages related (fcoe-utils, lldpad) had > the same versions before and after, the only exception was the kernel > itself. Before the dist-upgrade the kernel in use was 5.15.0-25-generic and > after dist-upgrade the kernel was 5.15.0-100-generic. > Suspecting a kernel problem I installed and booted different kernel > versions from 5.15.0-25 and 5.15.0-100 and discovered that the problem > probably was introduced with kernel 5.15.0-94, since it is the first > version showing the describe behavior. > Looking at the changelog of linux-modules package, I noticed some > changes on fcoe and
[Kernel-packages] [Bug 2057960] Re: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4
Hello Anderson, Thank you for reporting the issue. We have a new kernel for 22.04 (version 5.15.0-102.112) that is about to be released in the next few days. Could you please test it again with this kernel and report the results? You can either enable -proposed in your system and update the kernel, or wait until it gets promoted to -updates and a simple dist- upgrate will update the kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2057960 Title: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4 Status in linux package in Ubuntu: New Bug description: Since I've upgraded my server's to Ubuntu 22.04.4 I'm facing problems to make my fcoe setup to work correctly. Firstly, some context. We have a HPE Synergy appliance with a bunch of Synergy 480 Gen10 servers still running Ubuntu 20.04. Each 480 server has 4 QLogic BCM57840 NetXtreme II Ethernet Multi Function network adapters with two of them dedicated to storage communication through FCoE. Recently, I've upgraded one of them to Ubuntu 22.04 and realized that after the upgrade, all the Fibre Channel LUNs have disappeared. During the diagnostic process I noticed that both network (bnx2x) and fcoe (fcoe, bnx2fc) kernel drivers have been loaded properly, FCoE vlans were correctly detected by fcoe-utils, but there was no connection between the server and the storage and the server could not detect any LUN. I also noticed that fcoeadm was reporting the following status: # fcoeadm -i Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number:9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f2.4093-fco OS Device Name:host2 Node Name: 0x1a3d2725 Port Name: 0x1a3d2724 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0x State: Offline Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number:9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f3.4094-fco OS Device Name:host3 Node Name: 0x1a3d2727 Port Name: 0x1a3d2726 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0x State: Offline Although most of information displayed was correct, the port state was always offline (what explains no storage connectivity) and the FC-ID reported was 0x for both interfaces. Supposing that something went wrong during the upgrade process, I decided to make a fresh install of the server and, for my surprise, the fcoe ports went online and all luns were detected correctly. Unfortunately, the ports went offline again after a dist-upgrade. Trying to understand what was happening I performed another fresh install of the Ubuntu 22.04, but this time collecting some information about kernel and packages versions from before and after dist-upgrade. What I discovered was that all packages related (fcoe-utils, lldpad) had the same versions before and after, the only exception was the kernel itself. Before the dist-upgrade the kernel in use was 5.15.0-25-generic and after dist-upgrade the kernel was 5.15.0-100-generic. Suspecting a kernel problem I installed and booted different kernel versions from 5.15.0-25 and 5.15.0-100 and discovered that the problem probably was introduced with kernel 5.15.0-94, since it is the first version showing the describe behavior. Looking at the changelog of linux-modules package, I noticed some changes on fcoe and other scsi modules, right after the 5.15.0-91 version. Could those changes be the cause of the behavior observed on my server or just a coincidence? Is there any fix to it? Thanks in advance. Anderson ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-94-generic 5.15.0-94.104 ProcVersionSignature: Ubuntu 5.15.0-94.104-generic 5.15.136 Uname: Linux 5.15.0-94-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Mar 14 11:03 seq crw-rw 1 root audio 116, 33 Mar 14 11:03 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64
[Kernel-packages] [Bug 2057960] Re: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4
** Changed in: linux (Ubuntu) Assignee: (unassigned) => Kleber Sacilotto de Souza (kleber-souza) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2057960 Title: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4 Status in linux package in Ubuntu: New Bug description: Since I've upgraded my server's to Ubuntu 22.04.4 I'm facing problems to make my fcoe setup to work correctly. Firstly, some context. We have a HPE Synergy appliance with a bunch of Synergy 480 Gen10 servers still running Ubuntu 20.04. Each 480 server has 4 QLogic BCM57840 NetXtreme II Ethernet Multi Function network adapters with two of them dedicated to storage communication through FCoE. Recently, I've upgraded one of them to Ubuntu 22.04 and realized that after the upgrade, all the Fibre Channel LUNs have disappeared. During the diagnostic process I noticed that both network (bnx2x) and fcoe (fcoe, bnx2fc) kernel drivers have been loaded properly, FCoE vlans were correctly detected by fcoe-utils, but there was no connection between the server and the storage and the server could not detect any LUN. I also noticed that fcoeadm was reporting the following status: # fcoeadm -i Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number:9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f2.4093-fco OS Device Name:host2 Node Name: 0x1a3d2725 Port Name: 0x1a3d2724 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0x State: Offline Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number:9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f3.4094-fco OS Device Name:host3 Node Name: 0x1a3d2727 Port Name: 0x1a3d2726 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0x State: Offline Although most of information displayed was correct, the port state was always offline (what explains no storage connectivity) and the FC-ID reported was 0x for both interfaces. Supposing that something went wrong during the upgrade process, I decided to make a fresh install of the server and, for my surprise, the fcoe ports went online and all luns were detected correctly. Unfortunately, the ports went offline again after a dist-upgrade. Trying to understand what was happening I performed another fresh install of the Ubuntu 22.04, but this time collecting some information about kernel and packages versions from before and after dist-upgrade. What I discovered was that all packages related (fcoe-utils, lldpad) had the same versions before and after, the only exception was the kernel itself. Before the dist-upgrade the kernel in use was 5.15.0-25-generic and after dist-upgrade the kernel was 5.15.0-100-generic. Suspecting a kernel problem I installed and booted different kernel versions from 5.15.0-25 and 5.15.0-100 and discovered that the problem probably was introduced with kernel 5.15.0-94, since it is the first version showing the describe behavior. Looking at the changelog of linux-modules package, I noticed some changes on fcoe and other scsi modules, right after the 5.15.0-91 version. Could those changes be the cause of the behavior observed on my server or just a coincidence? Is there any fix to it? Thanks in advance. Anderson ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-94-generic 5.15.0-94.104 ProcVersionSignature: Ubuntu 5.15.0-94.104-generic 5.15.136 Uname: Linux 5.15.0-94-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Mar 14 11:03 seq crw-rw 1 root audio 116, 33 Mar 14 11:03 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown Date: Thu Mar 14 14:57:14 2024 HibernationDevice:
