Hi,Everyone,I have a problem as follow:
When I set the ACPI=on on the cmdline,and the OS can not boot(If set ACPI=off,
The system is OK). The attachmemt file is the booting log. Would help me
slove this ploblem? Thanks very much.
Note:kernel version v2.6.18,and the arch is x86_64.
Regards
laitianli
Bootdata ok (command line is ro root=LABEL=/ rhgb console=ttyS0,115200
console=tty1 apic=debug acpi=on)
Linux version 2.6.18-std (laitianli@XCompiler) (gcc version 4.1.2 20080704 (Red
Hat 4.1.2-55)) #13 SMP Thu Sep 10 16:35:59 CST 2015
BIOS-provided physical RAM map:
BIOS-e820: - 0009d400 (usable)
BIOS-e820: 0009d400 - 000a (reserved)
BIOS-e820: 000ca000 - 000cc000 (reserved)
BIOS-e820: 000e - 0010 (reserved)
BIOS-e820: 0010 - bf7a (usable)
BIOS-e820: bf7a - bf7bd000 (ACPI data)
BIOS-e820: bf7bd000 - bf7be000 (ACPI NVS)
BIOS-e820: bf7be000 - bf7ff000 (reserved)
BIOS-e820: bf80 - c000 (reserved)
BIOS-e820: e000 - f000 (reserved)
BIOS-e820: fec0 - fec1 (reserved)
BIOS-e820: fee0 - fee01000 (reserved)
BIOS-e820: ff00 - 0001 (reserved)
BIOS-e820: 0001 - 00014000 (usable)
DMI present.
No NUMA configuration found
Faking a node at -00014000
Bootmem setup node 0 -00014000
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 7:14 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec0, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a701 base: 0xfed0
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c200 (gap: c000:2000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 1028401
Kernel command line: ro root=LABEL=/ rhgb console=ttyS0,115200 console=tty1
apic=debug acpi=on
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2394.071 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x62c - 0xa2c
Memory: 4032088k/5242880k available (2276k kernel code, 153244k reserved, 1193k
data, 200k init)
Calibrating delay using timer specific routine.. 4791.75 BogoMIPS (lpj=2395878)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: warning: using only 9 banks
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0007) - 513 Objects with 52 Devices 118 Methods 37 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 68 Objects with 0 Devices 48 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 8 Objects with 0 Devices 1 Methods 2 Regions
ACPI Namespace successfully loaded at root 815aa740
evxfevnt-0089 [02] enable: Transition to ACPI mode successful
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
result 8312740
Detected 8.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x2
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=2393991)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
MCE: warning: using only 9 banks
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU X3430 @ 2.40GHz stepping 05
SMP alternatives: switching to SMP code
Bootin
