Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2021-02-01 Thread Johannes Sprigode
Thanks Wayne,

all good.

No issue with the current feature freeze status.

Most important is the actual s-expressions file format, which itself is
unlikely to change.

With that in mind I carry on roughly from where I suspended development.

Cheers

Johannes


On 2/02/21 2:17 am, Wayne Stambaugh wrote:
> Hi Johannes,
>
> I should have made it clear that the feature freeze implies that the
> file formats are frozen as well.  I'm not saying there would never be a
> case where we wouldn't change it but the chances are extremely low.
>
> Cheers,
>
> Wayne
>
> On 2/1/21 2:03 AM, Johannes Sprigode wrote:
>> Hi Wayne,
>>
>> appreciate your heads up.
>>
>> Will restart with current file format.
>>
>> Cheers
>>
>> Johannes
>>
>> On 1/02/21 1:52 am, Wayne Stambaugh wrote:
>>> Hi Johannes,
>>>
>>> The new schematic and symbol file formats are frozen unless we find a
>>> bug that needs fixed so you should be able to start working on this
>>> again.  Please note that we are in feature freeze so this feature will
>>> not be merged until V6 is branched and released and we open up V7
>>> development.
>>>
>>> Cheers,
>>>
>>> Wayne
>>>
>>> On 1/30/21 8:14 PM, Johannes Sprigode wrote:
 Hi Wayne et al,

 the new file format appears to be stable as of now.

 The format contains all required information to implement rotated texts.

 I am considering an implementation restart of my previous efforts.

 Are there any activities already underway?

 Cheers

 Johannes


 On 13/08/19 11:46 pm, Wayne Stambaugh wrote:
> Hi Johannes,
>
> The the new file format work is in progress and should be done in a few
> months.  The UI support for moving pin name and number text will happen
> some time after that.  I cannot say when for sure as the new file
> formats add a lot of new features which will require a significant
> amount of UI work so it could be while.
>
> Cheers,
>
> Wayne
>
> On 8/12/19 11:26 PM, Johannes Sprigode wrote:
>> Howdy Wayne,
>>
>> no worries. Thanks for the heads up. I'm not surprised at all since this
>> only makes sense to have.
>>
>> In the meantime I'll keep it up if viable as a local patch just for
>> fun-kickers.
>>
>> Is that feature already progressing? If so, which tag?
>>
>> Cheers
>>
>> Johannes
>>
>> On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
>>> Johannes,
>>>
>>> Once the new schematic and symbol library file formats are complete, you
>>> will be able orient pin number and name positions freely.  This is
>>> planned for version 6 which is currently under development so no changes
>>> will be made to the existing file format to support this.  Thank you for
>>> offering to help but this already is planned.
>>>
>>> Cheers,
>>>
>>> Wayne
>>>
>>> On 7/15/19 7:18 AM, Johannes Sprigode wrote:
 Hello there,

 been using Kicad for a while and have not looked back at eagle except
 for project imports.

 However, I found all those vertical texts  in eeschema quite 
 disruptive.
 So I've done something like in attached screen shot over the last 
 couple
 of days working off of master under Linux.

 Would you guys be interest to implement this sort of feature? If so, I
 would follow through with the nitty gritties since the actual
 implications are ‘slightly’ more complex then just that.

 Who would be the best contact to discuss this?

 I’m quite happy to lay out an implementation scenario.

 As it stands this ‘add-in’ will not impact on already existing
 libraries. Going by what is in master there is no such feature except
 some decent groundwork to build upon.

 Cheers

 Johannes


 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : kicad-developers@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp

>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
> ___
> Mailing list: https://launchpad.net/~kicad

Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2021-02-01 Thread Wayne Stambaugh
Hi Johannes,

I should have made it clear that the feature freeze implies that the
file formats are frozen as well.  I'm not saying there would never be a
case where we wouldn't change it but the chances are extremely low.

Cheers,

Wayne

On 2/1/21 2:03 AM, Johannes Sprigode wrote:
> Hi Wayne,
> 
> appreciate your heads up.
> 
> Will restart with current file format.
> 
> Cheers
> 
> Johannes
> 
> On 1/02/21 1:52 am, Wayne Stambaugh wrote:
>> Hi Johannes,
>>
>> The new schematic and symbol file formats are frozen unless we find a
>> bug that needs fixed so you should be able to start working on this
>> again.  Please note that we are in feature freeze so this feature will
>> not be merged until V6 is branched and released and we open up V7
>> development.
>>
>> Cheers,
>>
>> Wayne
>>
>> On 1/30/21 8:14 PM, Johannes Sprigode wrote:
>>> Hi Wayne et al,
>>>
>>> the new file format appears to be stable as of now.
>>>
>>> The format contains all required information to implement rotated texts.
>>>
>>> I am considering an implementation restart of my previous efforts.
>>>
>>> Are there any activities already underway?
>>>
>>> Cheers
>>>
>>> Johannes
>>>
>>>
>>> On 13/08/19 11:46 pm, Wayne Stambaugh wrote:
 Hi Johannes,

 The the new file format work is in progress and should be done in a few
 months.  The UI support for moving pin name and number text will happen
 some time after that.  I cannot say when for sure as the new file
 formats add a lot of new features which will require a significant
 amount of UI work so it could be while.

 Cheers,

 Wayne

 On 8/12/19 11:26 PM, Johannes Sprigode wrote:
> Howdy Wayne,
>
> no worries. Thanks for the heads up. I'm not surprised at all since this
> only makes sense to have.
>
> In the meantime I'll keep it up if viable as a local patch just for
> fun-kickers.
>
> Is that feature already progressing? If so, which tag?
>
> Cheers
>
> Johannes
>
> On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
>> Johannes,
>>
>> Once the new schematic and symbol library file formats are complete, you
>> will be able orient pin number and name positions freely.  This is
>> planned for version 6 which is currently under development so no changes
>> will be made to the existing file format to support this.  Thank you for
>> offering to help but this already is planned.
>>
>> Cheers,
>>
>> Wayne
>>
>> On 7/15/19 7:18 AM, Johannes Sprigode wrote:
>>> Hello there,
>>>
>>> been using Kicad for a while and have not looked back at eagle except
>>> for project imports.
>>>
>>> However, I found all those vertical texts  in eeschema quite disruptive.
>>> So I've done something like in attached screen shot over the last couple
>>> of days working off of master under Linux.
>>>
>>> Would you guys be interest to implement this sort of feature? If so, I
>>> would follow through with the nitty gritties since the actual
>>> implications are ‘slightly’ more complex then just that.
>>>
>>> Who would be the best contact to discuss this?
>>>
>>> I’m quite happy to lay out an implementation scenario.
>>>
>>> As it stands this ‘add-in’ will not impact on already existing
>>> libraries. Going by what is in master there is no such feature except
>>> some decent groundwork to build upon.
>>>
>>> Cheers
>>>
>>> Johannes
>>>
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
>
 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : kicad-developers@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>

Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2021-01-31 Thread Johannes Sprigode
Hi Wayne,

appreciate your heads up.

Will restart with current file format.

Cheers

Johannes

On 1/02/21 1:52 am, Wayne Stambaugh wrote:
> Hi Johannes,
>
> The new schematic and symbol file formats are frozen unless we find a
> bug that needs fixed so you should be able to start working on this
> again.  Please note that we are in feature freeze so this feature will
> not be merged until V6 is branched and released and we open up V7
> development.
>
> Cheers,
>
> Wayne
>
> On 1/30/21 8:14 PM, Johannes Sprigode wrote:
>> Hi Wayne et al,
>>
>> the new file format appears to be stable as of now.
>>
>> The format contains all required information to implement rotated texts.
>>
>> I am considering an implementation restart of my previous efforts.
>>
>> Are there any activities already underway?
>>
>> Cheers
>>
>> Johannes
>>
>>
>> On 13/08/19 11:46 pm, Wayne Stambaugh wrote:
>>> Hi Johannes,
>>>
>>> The the new file format work is in progress and should be done in a few
>>> months.  The UI support for moving pin name and number text will happen
>>> some time after that.  I cannot say when for sure as the new file
>>> formats add a lot of new features which will require a significant
>>> amount of UI work so it could be while.
>>>
>>> Cheers,
>>>
>>> Wayne
>>>
>>> On 8/12/19 11:26 PM, Johannes Sprigode wrote:
 Howdy Wayne,

 no worries. Thanks for the heads up. I'm not surprised at all since this
 only makes sense to have.

 In the meantime I'll keep it up if viable as a local patch just for
 fun-kickers.

 Is that feature already progressing? If so, which tag?

 Cheers

 Johannes

 On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
> Johannes,
>
> Once the new schematic and symbol library file formats are complete, you
> will be able orient pin number and name positions freely.  This is
> planned for version 6 which is currently under development so no changes
> will be made to the existing file format to support this.  Thank you for
> offering to help but this already is planned.
>
> Cheers,
>
> Wayne
>
> On 7/15/19 7:18 AM, Johannes Sprigode wrote:
>> Hello there,
>>
>> been using Kicad for a while and have not looked back at eagle except
>> for project imports.
>>
>> However, I found all those vertical texts  in eeschema quite disruptive.
>> So I've done something like in attached screen shot over the last couple
>> of days working off of master under Linux.
>>
>> Would you guys be interest to implement this sort of feature? If so, I
>> would follow through with the nitty gritties since the actual
>> implications are ‘slightly’ more complex then just that.
>>
>> Who would be the best contact to discuss this?
>>
>> I’m quite happy to lay out an implementation scenario.
>>
>> As it stands this ‘add-in’ will not impact on already existing
>> libraries. Going by what is in master there is no such feature except
>> some decent groundwork to build upon.
>>
>> Cheers
>>
>> Johannes
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : kicad-developers@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp

>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp


signature.asc
Description: OpenPGP digital signature
___
Mailing list: https://launchpad.net/~kicad-developers
Po

Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2021-01-31 Thread Wayne Stambaugh
Hi Johannes,

The new schematic and symbol file formats are frozen unless we find a
bug that needs fixed so you should be able to start working on this
again.  Please note that we are in feature freeze so this feature will
not be merged until V6 is branched and released and we open up V7
development.

Cheers,

Wayne

On 1/30/21 8:14 PM, Johannes Sprigode wrote:
> Hi Wayne et al,
> 
> the new file format appears to be stable as of now.
> 
> The format contains all required information to implement rotated texts.
> 
> I am considering an implementation restart of my previous efforts.
> 
> Are there any activities already underway?
> 
> Cheers
> 
> Johannes
> 
> 
> On 13/08/19 11:46 pm, Wayne Stambaugh wrote:
>> Hi Johannes,
>>
>> The the new file format work is in progress and should be done in a few
>> months.  The UI support for moving pin name and number text will happen
>> some time after that.  I cannot say when for sure as the new file
>> formats add a lot of new features which will require a significant
>> amount of UI work so it could be while.
>>
>> Cheers,
>>
>> Wayne
>>
>> On 8/12/19 11:26 PM, Johannes Sprigode wrote:
>>> Howdy Wayne,
>>>
>>> no worries. Thanks for the heads up. I'm not surprised at all since this
>>> only makes sense to have.
>>>
>>> In the meantime I'll keep it up if viable as a local patch just for
>>> fun-kickers.
>>>
>>> Is that feature already progressing? If so, which tag?
>>>
>>> Cheers
>>>
>>> Johannes
>>>
>>> On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
 Johannes,

 Once the new schematic and symbol library file formats are complete, you
 will be able orient pin number and name positions freely.  This is
 planned for version 6 which is currently under development so no changes
 will be made to the existing file format to support this.  Thank you for
 offering to help but this already is planned.

 Cheers,

 Wayne

 On 7/15/19 7:18 AM, Johannes Sprigode wrote:
> Hello there,
>
> been using Kicad for a while and have not looked back at eagle except
> for project imports.
>
> However, I found all those vertical texts  in eeschema quite disruptive.
> So I've done something like in attached screen shot over the last couple
> of days working off of master under Linux.
>
> Would you guys be interest to implement this sort of feature? If so, I
> would follow through with the nitty gritties since the actual
> implications are ‘slightly’ more complex then just that.
>
> Who would be the best contact to discuss this?
>
> I’m quite happy to lay out an implementation scenario.
>
> As it stands this ‘add-in’ will not impact on already existing
> libraries. Going by what is in master there is no such feature except
> some decent groundwork to build upon.
>
> Cheers
>
> Johannes
>
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
>
 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : kicad-developers@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 



signature.asc
Description: OpenPGP digital signature
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp


Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2021-01-30 Thread Johannes Sprigode
Hi Wayne et al,

the new file format appears to be stable as of now.

The format contains all required information to implement rotated texts.

I am considering an implementation restart of my previous efforts.

Are there any activities already underway?

Cheers

Johannes


On 13/08/19 11:46 pm, Wayne Stambaugh wrote:
> Hi Johannes,
>
> The the new file format work is in progress and should be done in a few
> months.  The UI support for moving pin name and number text will happen
> some time after that.  I cannot say when for sure as the new file
> formats add a lot of new features which will require a significant
> amount of UI work so it could be while.
>
> Cheers,
>
> Wayne
>
> On 8/12/19 11:26 PM, Johannes Sprigode wrote:
>> Howdy Wayne,
>>
>> no worries. Thanks for the heads up. I'm not surprised at all since this
>> only makes sense to have.
>>
>> In the meantime I'll keep it up if viable as a local patch just for
>> fun-kickers.
>>
>> Is that feature already progressing? If so, which tag?
>>
>> Cheers
>>
>> Johannes
>>
>> On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
>>> Johannes,
>>>
>>> Once the new schematic and symbol library file formats are complete, you
>>> will be able orient pin number and name positions freely.  This is
>>> planned for version 6 which is currently under development so no changes
>>> will be made to the existing file format to support this.  Thank you for
>>> offering to help but this already is planned.
>>>
>>> Cheers,
>>>
>>> Wayne
>>>
>>> On 7/15/19 7:18 AM, Johannes Sprigode wrote:
 Hello there,

 been using Kicad for a while and have not looked back at eagle except
 for project imports.

 However, I found all those vertical texts  in eeschema quite disruptive.
 So I've done something like in attached screen shot over the last couple
 of days working off of master under Linux.

 Would you guys be interest to implement this sort of feature? If so, I
 would follow through with the nitty gritties since the actual
 implications are ‘slightly’ more complex then just that.

 Who would be the best contact to discuss this?

 I’m quite happy to lay out an implementation scenario.

 As it stands this ‘add-in’ will not impact on already existing
 libraries. Going by what is in master there is no such feature except
 some decent groundwork to build upon.

 Cheers

 Johannes


 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : kicad-developers@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp

>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp



signature.asc
Description: OpenPGP digital signature
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp


Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2019-08-13 Thread Wayne Stambaugh
Hi Johannes,

The the new file format work is in progress and should be done in a few
months.  The UI support for moving pin name and number text will happen
some time after that.  I cannot say when for sure as the new file
formats add a lot of new features which will require a significant
amount of UI work so it could be while.

Cheers,

Wayne

On 8/12/19 11:26 PM, Johannes Sprigode wrote:
> Howdy Wayne,
> 
> no worries. Thanks for the heads up. I'm not surprised at all since this
> only makes sense to have.
> 
> In the meantime I'll keep it up if viable as a local patch just for
> fun-kickers.
> 
> Is that feature already progressing? If so, which tag?
> 
> Cheers
> 
> Johannes
> 
> On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
>> Johannes,
>>
>> Once the new schematic and symbol library file formats are complete, you
>> will be able orient pin number and name positions freely.  This is
>> planned for version 6 which is currently under development so no changes
>> will be made to the existing file format to support this.  Thank you for
>> offering to help but this already is planned.
>>
>> Cheers,
>>
>> Wayne
>>
>> On 7/15/19 7:18 AM, Johannes Sprigode wrote:
>>> Hello there,
>>>
>>> been using Kicad for a while and have not looked back at eagle except
>>> for project imports.
>>>
>>> However, I found all those vertical texts  in eeschema quite disruptive.
>>> So I've done something like in attached screen shot over the last couple
>>> of days working off of master under Linux.
>>>
>>> Would you guys be interest to implement this sort of feature? If so, I
>>> would follow through with the nitty gritties since the actual
>>> implications are ‘slightly’ more complex then just that.
>>>
>>> Who would be the best contact to discuss this?
>>>
>>> I’m quite happy to lay out an implementation scenario.
>>>
>>> As it stands this ‘add-in’ will not impact on already existing
>>> libraries. Going by what is in master there is no such feature except
>>> some decent groundwork to build upon.
>>>
>>> Cheers
>>>
>>> Johannes
>>>
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp


Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2019-08-12 Thread Johannes Sprigode
Howdy Wayne,

no worries. Thanks for the heads up. I'm not surprised at all since this
only makes sense to have.

In the meantime I'll keep it up if viable as a local patch just for
fun-kickers.

Is that feature already progressing? If so, which tag?

Cheers

Johannes

On 13/08/19 7:27 AM, Wayne Stambaugh wrote:
> Johannes,
>
> Once the new schematic and symbol library file formats are complete, you
> will be able orient pin number and name positions freely.  This is
> planned for version 6 which is currently under development so no changes
> will be made to the existing file format to support this.  Thank you for
> offering to help but this already is planned.
>
> Cheers,
>
> Wayne
>
> On 7/15/19 7:18 AM, Johannes Sprigode wrote:
>> Hello there,
>>
>> been using Kicad for a while and have not looked back at eagle except
>> for project imports.
>>
>> However, I found all those vertical texts  in eeschema quite disruptive.
>> So I've done something like in attached screen shot over the last couple
>> of days working off of master under Linux.
>>
>> Would you guys be interest to implement this sort of feature? If so, I
>> would follow through with the nitty gritties since the actual
>> implications are ‘slightly’ more complex then just that.
>>
>> Who would be the best contact to discuss this?
>>
>> I’m quite happy to lay out an implementation scenario.
>>
>> As it stands this ‘add-in’ will not impact on already existing
>> libraries. Going by what is in master there is no such feature except
>> some decent groundwork to build upon.
>>
>> Cheers
>>
>> Johannes
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp



signature.asc
Description: OpenPGP digital signature
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp


Re: [Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2019-08-12 Thread Wayne Stambaugh
Johannes,

Once the new schematic and symbol library file formats are complete, you
will be able orient pin number and name positions freely.  This is
planned for version 6 which is currently under development so no changes
will be made to the existing file format to support this.  Thank you for
offering to help but this already is planned.

Cheers,

Wayne

On 7/15/19 7:18 AM, Johannes Sprigode wrote:
> Hello there,
> 
> been using Kicad for a while and have not looked back at eagle except
> for project imports.
> 
> However, I found all those vertical texts  in eeschema quite disruptive.
> So I've done something like in attached screen shot over the last couple
> of days working off of master under Linux.
> 
> Would you guys be interest to implement this sort of feature? If so, I
> would follow through with the nitty gritties since the actual
> implications are ‘slightly’ more complex then just that.
> 
> Who would be the best contact to discuss this?
> 
> I’m quite happy to lay out an implementation scenario.
> 
> As it stands this ‘add-in’ will not impact on already existing
> libraries. Going by what is in master there is no such feature except
> some decent groundwork to build upon.
> 
> Cheers
> 
> Johannes
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp


[Kicad-developers] [kicad-eeschema] Vertical pins with horizontal texts

2019-07-15 Thread Johannes Sprigode
Hello there,

been using Kicad for a while and have not looked back at eagle except
for project imports.

However, I found all those vertical texts  in eeschema quite disruptive.
So I've done something like in attached screen shot over the last couple
of days working off of master under Linux.

Would you guys be interest to implement this sort of feature? If so, I
would follow through with the nitty gritties since the actual
implications are ‘slightly’ more complex then just that.

Who would be the best contact to discuss this?

I’m quite happy to lay out an implementation scenario.

As it stands this ‘add-in’ will not impact on already existing
libraries. Going by what is in master there is no such feature except
some decent groundwork to build upon.

Cheers

Johannes



signature.asc
Description: OpenPGP digital signature
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp