KR> for sale super deal on KR
For sale KR II converted to single seat email no1son38 at aol.com for photos and info > > > Randy Moore > challenger II sold > avid mark IV > KR II converted to single seat for sale 2,000 > Newbern Tn 38059 > > > cell 731589 1330 >
KR> Gathering
I am coming in on Wed the 2nd at 11am @ PDX. Reserved a Quad Cab pickup at off airport Car rental. Return on Sunday with a 6:45A Departure flight. Dave M Nashua NH On 8/10/2015 2:14 PM, jon kimmel via KRnet wrote: > Things might work out at the last minute for me to come to the > gathering...thinking about flying and camping rather than driving...is > there anyone still looking to share rental car cost? > > https://sites.google.com/site/mykr2stretch/ > https://sites.google.com/site/mykr2stretch/parts-for-sale > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > > > - > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4830 / Virus Database: 4365/10410 - Release Date: 08/10/15 > >
KR> KR engine mount?
I think this will do it. http://s366.photobucket.com/user/flightsimmer_2009/media/Mobile%20Uploads/20150812_110249_zpslwt3lffv.jpg.html mfreeman2--- via KRnet wrote: > Alright I found it its attached to a GP VW type 4 2600 cc engine sitting in > the crate that's why it was so hard to find. I'll try to post a picture of > it. > The dimensions are 13 and three quarter inches by 15 and three quarter inches > center to center of the square pads that mount against the firewall. > It has the Diehl case with full electric. > > mfreeman2--- via KRnet wrote: > > I had one but I need to do a search and see if I still have it. It may take > > a bit of time to dig through my stuff. > > > > > > Mark Langford via KRnet wrote: > > > I received the email below from a guy that is looking for an engine > > > mount for his KR1.5. It sounds like the one on N891JF, which isn't for > > > sale, and doesn't help him. But does anybody have a mount like this for > > > sale? If so, please contact me and I'll forward your contact info to > > > him. Thanks, Mark Langford > > > ___ > > > > > > I'm still in search for a VW mount that is a bolt-up to the four each > > > 4-stud attachment points.The Great Plains mounts shown in their > > > catalogue have single bolt attachment feet, not the quad feet that I > > > need to use the present stud patterns. > > > > > > The upper firewall attachments are 22 1/8" apart , the lowers 23 1/8". > > > Upper to lower spread 13 3/8" (center to center) > > > > > > Do those figures bring anything to mind? Thanks again, Keith > > > __ > > > > > > Mark Langford, Harvest, AL > > > ML "at" N56ML.com > > > www.N56ML.com > > > > > > > > > ___ > > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > > please see other KRnet info at http://www.krnet.org/info.html > > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > > options > > > > ___ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > options > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR engine mount?
Alright I found it its attached to a GP VW type 4 2600 cc engine sitting in the crate that's why it was so hard to find. I'll try to post a picture of it. The dimensions are 13 and three quarter inches by 15 and three quarter inches center to center of the square pads that mount against the firewall. It has the Diehl case with full electric. mfreeman2--- via KRnet wrote: > I had one but I need to do a search and see if I still have it. It may take a > bit of time to dig through my stuff. > > > Mark Langford via KRnet wrote: > > I received the email below from a guy that is looking for an engine > > mount for his KR1.5. It sounds like the one on N891JF, which isn't for > > sale, and doesn't help him. But does anybody have a mount like this for > > sale? If so, please contact me and I'll forward your contact info to > > him. Thanks, Mark Langford > > ___ > > > > I'm still in search for a VW mount that is a bolt-up to the four each > > 4-stud attachment points.The Great Plains mounts shown in their > > catalogue have single bolt attachment feet, not the quad feet that I > > need to use the present stud patterns. > > > > The upper firewall attachments are 22 1/8" apart , the lowers 23 1/8". > > Upper to lower spread 13 3/8" (center to center) > > > > Do those figures bring anything to mind? Thanks again, Keith > > __ > > > > Mark Langford, Harvest, AL > > ML "at" N56ML.com > > www.N56ML.com > > > > > > ___ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > options > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR2S model for flight simulation
Thanks, Rob Gary Wold Original message From: Robert7721 List-Post: krnet@list.krnet.org Date: 08/12/2015 12:28 PM (GMT-06:00) To: krnet at list.krnet.org Cc: pilotgary at charter.net Subject: Re: KR> KR2S model for flight simulation Gary, There is a link to one on my web site for X-Plane. It is for my specific airplane, so the performance is not "terrific". You are welcome to use/modify it as you like using X-Planes designer. You can change out the 70 hp VW and put a 180 hp engine on it and she will fly pretty awesomely. She will be tough to slow down for landing, so you might want to put flaps or a belly board on her as well.? http://www.robert7721.com/ Thanks, Rob Schmitt N1852Z -Original Message- From: Gary Wold via KRnet To: krnet Cc: Gary Wold Sent: Wed, Aug 12, 2015 11:05 am Subject: KR> KR2S model for flight simulation Anyone know if there is a decent KR2S model available for either the Flight Simulator or X-Plane simulator programs? I found one for X-Plane but the comments I saw indicated it has a prop strike when brakes are applied (couple years old though). I have an old version of MS Flight Sim that I want to upgrade but would prefer an application for which there is a decent KR2S. Thanks Gary Wold EAA Lifetime member Eagle Scout ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> KR2S model for flight simulation
Gary, There is a link to one on my web site for X-Plane. It is for my specific airplane, so the performance is not "terrific". You are welcome to use/modify it as you like using X-Planes designer. You can change out the 70 hp VW and put a 180 hp engine on it and she will fly pretty awesomely. She will be tough to slow down for landing, so you might want to put flaps or a belly board on her as well. http://www.robert7721.com/ Thanks, Rob Schmitt N1852Z -Original Message- From: Gary Wold via KRnet To: krnet Cc: Gary Wold Sent: Wed, Aug 12, 2015 11:05 am Subject: KR> KR2S model for flight simulation Anyone know if there is a decent KR2S model available for either the Flight Simulator or X-Plane simulator programs? I found one for X-Plane but the comments I saw indicated it has a prop strike when brakes are applied (couple years old though). I have an old version of MS Flight Sim that I want to upgrade but would prefer an application for which there is a decent KR2S. Thanks Gary Wold EAA Lifetime member Eagle Scout ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> KR2S model for flight simulation
Anyone know if there is a decent KR2S model available for either the Flight Simulator or X-Plane simulator programs? I found one for X-Plane but the comments I saw indicated it has a prop strike when brakes are applied (couple years old though). I have an old version of MS Flight Sim that I want to upgrade but would prefer an application for which there is a decent KR2S. Thanks Gary Wold EAA Lifetime member Eagle Scout
KR> Kansas BBQ/Fish Fry Aug 15
Jim the cook out is this sat. 15th Rob and Jeff planning on flying in around 4:00 pm this is a one night fly in we get around 15 to 20 plane and 40 people .We having fish and smoke pork at 5;00 pm this is a?free meal and most plane leave before ?dark Rob Jeff? be camping out so their be three kr2 hear? terry chizek On Tuesday, August 11, 2015 4:52 PM, Jim Dexter via KRnet wrote: Hi Rob or whoever knows - I'm planning on attending the flyin at 43K.? Do you have any details, such as when it starts?
