KR> Dr.Dean Hinges
I am currently on the tail section and getting alittle stumpped of how to get the hinges to align. I drilled the rod endbearing holes but what is a good way to align the eye bolts? Justin N116JW www.geocities.com/attngrabber14/Home
KR> Dr.Dean Hinges
A wire rod (dowel) from Home Depot should give you a great / accurate alignment. At 09:12 PM 9/26/2003 -0500, you wrote: >I am currently on the tail section and getting alittle stumpped of how to >get the hinges to align. I drilled the rod endbearing holes but what is a >good way to align the eye bolts? > >Justin >N116JW >www.geocities.com/attngrabber14/Home > > >___ >see KRnet list details at http://www.krnet.org/instructions.html Larry Severson Fountain Valley, CA 92708 (714) 968-9852 lar...@socal.rr.com
KR> Dr.Dean Hinges
Justin, The way I did mine was to draw a center line on one spar. Mark the cross points at each hinge location. Clamp the two spars together offseting them .400" longitudinally. Then drill both spars at the same time. A 3/16" rod can hold them together while you foam and glass the HS & VS Dave Mullins Nashua, New Hampshire http://N323XL.iwarp.com Justin wrote: >I am currently on the tail section and getting alittle stumpped of how to >get the hinges to align. I drilled the rod endbearing holes but what is a >good way to align the eye bolts? > >Justin >N116JW >www.geocities.com/attngrabber14/Home > > >___ >see KRnet list details at http://www.krnet.org/instructions.html > > >
