KR> hapi engine crank- prop hubs, prop coming off ect
i am planning on using a hapi engine what kind of problems do they have with? the crank or prop hubs or spacer any advice appreciated thanks dean choitz
KR> HAPI engine for sale.
I have a zero time HAPI 1834 for sale. Posa carb, dual ignition, starter and alternator, stinger exhaust, elephant-foot rockers, windage tray, oil cooler, KR mount. Always stored indoors, oil squirted in plug holes and turned over every couple of years. $3,000.00 OBO. Call Roger at 801-272-7847
KR> HAPI engine
I too had a old 1835 HAPI engine on my KR-1 with 500hrs on it when I replaced the alternator last summer. I too found the same Scary Looking elongated holes on my flywheel! In retrospect, I was really glad the alternator failed!!! On 5/6/2010 10:20 AM, Mark Langford wrote: > Rich Hartwig wrote: > > >> For information concerning cracking of HAPI flywheels, check the archives >> at: >> http://www.maddyhome.com/krsrch/search and search "HAPI flywheels" >> > And the one below is pretty graphic. I wrote this a few years ago after > seeing Jim Hill's. > - > And if it has an aluminum flywheel, check out the two photos at > http://www.krnet.org/misc/HAPI_flywheel/050917111m2.jpg and > http://www.krnet.org/misc/HAPI_flywheel/050917111m.jpg . This was on Jim > Hill's HAPI engine, and it appears to be a matter of seconds away from > coming apart. Steve at Great Plains also has a cure for this, I believe. > What made it obvious was loads of end play on the crankshaft...the prop > would move fore and aft an eighth of an inch or so, rather than the .004" or > so it's supposed to be. > > Mark Langford > n5...@hiwaay.net > website www.n56ml.com > > > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > >
KR> HAPI engine
Rich Hartwig wrote: > For information concerning cracking of HAPI flywheels, check the archives > at: > http://www.maddyhome.com/krsrch/search and search "HAPI flywheels" And the one below is pretty graphic. I wrote this a few years ago after seeing Jim Hill's. - And if it has an aluminum flywheel, check out the two photos at http://www.krnet.org/misc/HAPI_flywheel/050917111m2.jpg and http://www.krnet.org/misc/HAPI_flywheel/050917111m.jpg . This was on Jim Hill's HAPI engine, and it appears to be a matter of seconds away from coming apart. Steve at Great Plains also has a cure for this, I believe. What made it obvious was loads of end play on the crankshaft...the prop would move fore and aft an eighth of an inch or so, rather than the .004" or so it's supposed to be. Mark Langford n5...@hiwaay.net website www.n56ml.com
KR> HAPI engine
Very much appreciated, Rich. The more I read, the more I lean Corvair. Thanks, again. Joe - Original Message - From: To: Sent: Thursday, May 06, 2010 8:28 AM Subject: KR> HAPI engine Joe, For information concerning cracking of HAPI flywheels, check the archives at: http://www.maddyhome.com/krsrch/search and search "HAPI flywheels" Rich Hartwig Waunakee WI ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.437 / Virus Database: 271.1.1/2857 - Release Date: 05/06/10 06:26:00
KR> HAPI engine
Joe, For information concerning cracking of HAPI flywheels, check the archives at: http://www.maddyhome.com/krsrch/search and search "HAPI flywheels" Rich Hartwig Waunakee WI
KR> HAPI engine
Joe, For information concerning cracking of HAPI flywheels, check the archives at: http://www.maddyhome.com/krsrch/search and search "HAPI flywheels" Rich Hartwig Waunakee WI
KR> Hapi Engine Mount/KR for sale
Howdy, A while back I posted a request for a Hapi Engine Mount for a KR-1. I'm still looking if anyone knows of one for sale...I want to install a C-85 in a KR-1. Also I have a very nice KR-100 project for sale With the Boat and center section wood completed,Tail feathers completed,seat installed,Controls installed,Alum spring Gear with Cleavland brakes. Spars and rib templates completed. firewall Set up for 0-200. If anyone is interested please e-mail me. Located in Northern Nevada.
KR> Hapi Engine Mount
Hep Porter, You forgot to say where you are. The world's a big place Robin. - Original Message - From: "Hep Porter" To: Sent: Tuesday, July 21, 2009 5:52 PM Subject: KR> Hapi Engine Mount Howdy, I'm looking for a Hapi engine mount to install a C-85 on a KR-1 does any one have one they would be willing to sell? Thanks Hep Porter ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Hapi Engine Mount
there is one in tooele city utah , I can see if it is for sale. - Original Message - From: Hep Porter<mailto:heppor...@yahoo.com> To: kr...@mylist.net<mailto:kr...@mylist.net> Sent: Monday, July 20, 2009 11:52 PM Subject: KR> Hapi Engine Mount Howdy, I'm looking for a Hapi engine mount to install a C-85 on a KR-1 does any one have one they would be willing to sell? Thanks Hep Porter ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp<http://www.maddyhome.com/krsrch/index.jsp> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net<mailto:krnet-le...@mylist.net> please see other KRnet info at http://www.krnet.org/info.html<http://www.krnet.org/info.html>
KR> Hapi Engine Mount
Howdy, I'm looking for a Hapi engine mount to install a C-85 on a KR-1 does any one have one they would be willing to sell? Thanks Hep Porter
KR> HAPI engine for sale
It looks like nobody is interested in my KR2 project, so I have decided to scrap it. I have a zero time HAPI 1834 engine, dual mags, windage tray, elephant foot rockers, alternator, Sting exhaust, Posa carburetor, prop flange, mount, all manuals and log book. $2, 500.00. Plane free with purchase of engine. Roger @ 801-518-9164 or 42ol...@comcast.net
KR> HAPI Engine Mount
Bob Farmer wrote: From: To: Sent: Sunday, July 25, 2004 4:31 AM Subject: Re: KR> HAPI Engine Mount > I have a mount but do not know what accessory case it fits. Engine mount > holes are approx 11 5/8" lower to upper 10 1/2" between the lower and 6 11/16" > between the upper. Anyone know which I have. > I believe I have the same mount which I bought from Hapi. The dimensions check with mine. The only dimension that I could not measure accurately was the 10 1/2 inch between the lower mounts as my alternator and starter are in the way. Just for further identifications: There is a tube between the lower engine mount on the pilot side and the lower firewall mount on the co-pilot side. Upper engine mount each have one tube welded Upper engine mount, both sides have one tube welded. Left bottom engine has three tubes welded on it; Bottom right engine mount has two tubes welded on it. Upper *Firewall* mounts have two tubes each.. Lower *Firewall* mounts - left one tube, right two tubes. And now what you have been waiting for!! It is for a Hapi Engine: 75-DEH Magnum 1915 cc 75hp @ 3400 rpm Dual Electronic Ignition Hydraulic Valve Lifters Alternator 45 Amps. Note: DEH obviously stands for Dual, Electronic, Hydraulic. Hope this helps. Sorry for late reply but vacation came between then and now. Regards, Louis Louis Staalberg Payson, AZ n...@cbiwireless.com
KR> HAPI Engine Mount
Can someone explain the difference between the different mounts, or are there any engine mount photo's around to what a Hapi is?? My mount is off ?? Revmaster engine ?? Phillip Matheson mathe...@dodo.com.au Australia VH PKR See our engines and kits at. http://www.vw-engines.com/ http://www.homebuilt-aviation.com/ See my KR at Mark Jones web http://mywebpage.netscape.com/n886mj/pmkr2.html
KR> HAPI Engine Mount
Phillip, In my blue construction manual, Page 98 there is a drawing of an engine mount with dimensions. I have two engine mounts for my project and neither one of them are the same dimensions as what is in the book. The one illustrated in the manual measures; top horizontal width = 7 3/4" bottom horizontal width = 8 1/4", the vertical distance is 8 3/4". The great plains engine mount I have, which bolts up to the Diehl accessory case is rectangular, 9 1/2" horizontal and 11" vertical. the other mount I have is narrow at the top and wider at the bottom, width at top is 6 3/4", width at bottom 10 1/2" ; the vertical distance is approximately 11 3/8". Both of the engine mounts I have use the same bolt pattern through the firewall. I believe this last one is a HAPI mount. Hope this helps a little. Bud Midkiff Lynnwood, WA KR2Streched email: c.midk...@verizon.net web: http://mysite.verizon.net/res18ums/index.html Ps. John, I too would be interested in any kind of get together of KR builders in the west! - Original Message - From: "Phillip Matheson" Subject: Re: KR> HAPI Engine Mount Can someone explain the difference between the different mounts, or are there any engine mount photo's around to what a Hapi is?? My mount is off ?? Revmaster engine ?? Phillip Matheson
KR> HAPI Engine Mount
I have a mount but do not know what accessory case it fits. Engine mount holes are approx 11 5/8" lower to upper 10 1/2" between the lower and 6 11/16" between the upper. Anyone know which I have.
KR> Hapi Engine Mount
Hello All, Does anyone out there have a Hapi engine mount they would like to sell? I am gathering components for an 0200 upgrade. Thanks! Steve Glover KR-2 N902G AJO, Ca.
KR> Hapi Engine Mount
>Does anyone out there have a Hapi engine mount they would like to sell? I >am gathering components for an 0200 upgrade. >Steve Glover +++ Steve, I used a HAPI mount for my 0-200 and with the 24" stretch on my fuselage ,and for starter clearance, I had to add some 1" spacers on the firewall. Do a weight and balance with the engine on before you do any plumbing. Also, the standard alternator would not clear the motor mount so I'm using a small (12 amp) B&C alternator. I made an even trade for mine but they are not cheap! As always, your results may vary. Larry Flesner
