KR> Hapi Engine Mount/KR for sale
Howdy, A while back I posted a request for a Hapi Engine Mount for a KR-1. I'm still looking if anyone knows of one for sale...I want to install a C-85 in a KR-1. Also I have a very nice KR-100 project for sale With the Boat and center section wood completed,Tail feathers completed,seat installed,Controls installed,Alum spring Gear with Cleavland brakes. Spars and rib templates completed. firewall Set up for 0-200. If anyone is interested please e-mail me. Located in Northern Nevada.
KR> Hapi Engine Mount
Hep Porter, You forgot to say where you are. The world's a big place Robin. - Original Message - From: "Hep Porter" To: Sent: Tuesday, July 21, 2009 5:52 PM Subject: KR> Hapi Engine Mount Howdy, I'm looking for a Hapi engine mount to install a C-85 on a KR-1 does any one have one they would be willing to sell? Thanks Hep Porter ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Hapi Engine Mount
there is one in tooele city utah , I can see if it is for sale. - Original Message - From: Hep Porter<mailto:heppor...@yahoo.com> To: kr...@mylist.net<mailto:kr...@mylist.net> Sent: Monday, July 20, 2009 11:52 PM Subject: KR> Hapi Engine Mount Howdy, I'm looking for a Hapi engine mount to install a C-85 on a KR-1 does any one have one they would be willing to sell? Thanks Hep Porter ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp<http://www.maddyhome.com/krsrch/index.jsp> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net<mailto:krnet-le...@mylist.net> please see other KRnet info at http://www.krnet.org/info.html<http://www.krnet.org/info.html>
KR> Hapi Engine Mount
Howdy, I'm looking for a Hapi engine mount to install a C-85 on a KR-1 does any one have one they would be willing to sell? Thanks Hep Porter
KR> HAPI Engine Mount
Bob Farmer wrote: From: To: Sent: Sunday, July 25, 2004 4:31 AM Subject: Re: KR> HAPI Engine Mount > I have a mount but do not know what accessory case it fits. Engine mount > holes are approx 11 5/8" lower to upper 10 1/2" between the lower and 6 11/16" > between the upper. Anyone know which I have. > I believe I have the same mount which I bought from Hapi. The dimensions check with mine. The only dimension that I could not measure accurately was the 10 1/2 inch between the lower mounts as my alternator and starter are in the way. Just for further identifications: There is a tube between the lower engine mount on the pilot side and the lower firewall mount on the co-pilot side. Upper engine mount each have one tube welded Upper engine mount, both sides have one tube welded. Left bottom engine has three tubes welded on it; Bottom right engine mount has two tubes welded on it. Upper *Firewall* mounts have two tubes each.. Lower *Firewall* mounts - left one tube, right two tubes. And now what you have been waiting for!! It is for a Hapi Engine: 75-DEH Magnum 1915 cc 75hp @ 3400 rpm Dual Electronic Ignition Hydraulic Valve Lifters Alternator 45 Amps. Note: DEH obviously stands for Dual, Electronic, Hydraulic. Hope this helps. Sorry for late reply but vacation came between then and now. Regards, Louis Louis Staalberg Payson, AZ n...@cbiwireless.com
KR> HAPI Engine Mount
Can someone explain the difference between the different mounts, or are there any engine mount photo's around to what a Hapi is?? My mount is off ?? Revmaster engine ?? Phillip Matheson mathe...@dodo.com.au Australia VH PKR See our engines and kits at. http://www.vw-engines.com/ http://www.homebuilt-aviation.com/ See my KR at Mark Jones web http://mywebpage.netscape.com/n886mj/pmkr2.html
KR> HAPI Engine Mount
Phillip, In my blue construction manual, Page 98 there is a drawing of an engine mount with dimensions. I have two engine mounts for my project and neither one of them are the same dimensions as what is in the book. The one illustrated in the manual measures; top horizontal width = 7 3/4" bottom horizontal width = 8 1/4", the vertical distance is 8 3/4". The great plains engine mount I have, which bolts up to the Diehl accessory case is rectangular, 9 1/2" horizontal and 11" vertical. the other mount I have is narrow at the top and wider at the bottom, width at top is 6 3/4", width at bottom 10 1/2" ; the vertical distance is approximately 11 3/8". Both of the engine mounts I have use the same bolt pattern through the firewall. I believe this last one is a HAPI mount. Hope this helps a little. Bud Midkiff Lynnwood, WA KR2Streched email: c.midk...@verizon.net web: http://mysite.verizon.net/res18ums/index.html Ps. John, I too would be interested in any kind of get together of KR builders in the west! - Original Message - From: "Phillip Matheson" Subject: Re: KR> HAPI Engine Mount Can someone explain the difference between the different mounts, or are there any engine mount photo's around to what a Hapi is?? My mount is off ?? Revmaster engine ?? Phillip Matheson
KR> HAPI Engine Mount
I have a mount but do not know what accessory case it fits. Engine mount holes are approx 11 5/8" lower to upper 10 1/2" between the lower and 6 11/16" between the upper. Anyone know which I have.
KR> Hapi Engine Mount
Hello All, Does anyone out there have a Hapi engine mount they would like to sell? I am gathering components for an 0200 upgrade. Thanks! Steve Glover KR-2 N902G AJO, Ca.
KR> Hapi Engine Mount
>Does anyone out there have a Hapi engine mount they would like to sell? I >am gathering components for an 0200 upgrade. >Steve Glover +++ Steve, I used a HAPI mount for my 0-200 and with the 24" stretch on my fuselage ,and for starter clearance, I had to add some 1" spacers on the firewall. Do a weight and balance with the engine on before you do any plumbing. Also, the standard alternator would not clear the motor mount so I'm using a small (12 amp) B&C alternator. I made an even trade for mine but they are not cheap! As always, your results may vary. Larry Flesner