KR> I got the fever, I got the plans and I got the wood >Kr building question
Beside what Mark said. ? ? One of my most used tools is this air-angle-die-grinder/?rotary sander.Make sure you add three drops of 3an1 type oil everyday you use it. http://m.harborfreight.com/air-angle-die-grinder-32046.html Here's the link for the sanding discs. http://www.empireabrasives.com/2-inch-quick-change-roloc-sanding-disc-a-o-25-pack/?gclid=Cj0KEQiAisy1BRD7_YSgpduD2cEBEiQAPR3UuEOVfn9j-ePYpmLkKfGMs0h6uDBKK6ohEfrfiqeHcJEaAtR88P8HAQ Paul ViskBelleville Il618-406-4705 Stan wrote: > What tools aside from those listed here ie how many and what type of clamps > do you recommend for the glue up?
KR> I got the fever, I got the plans and I got the wood >Kr building question
An absolute must have for me was a good wet / dry vac. I'm a bit of a clean freak and believe me, there will be a lot of saw dust, foam dust and fiberglass dust. Mike Sylvester kr2s builder Birmingham,AL. Cell no.205-966-3854 > To: krnet at list.krnet.org > Date: Thu, 4 Feb 2016 05:24:29 -0700 > Subject: Re: KR> I got the fever, I got the plans and I got the wood >Kr > building question > From: krnet at list.krnet.org > CC: ml at n56ml.com > > Stan wrote: > > > What tools aside from those listed here ie how many and what type of clamps > > do you recommend for the glue up? > > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> I got the fever, I got the plans and I got the wood >Kr building question
I have 30-6" clamps, 20-12" clamps, 2-4' clamps, 2-6' clamps and 2 pole clamps. I recommend an electric DA 5" sander, and 4 chisels 1/4, 1/2, 3/4 and 1" And I have a 6" and 12" hand planer. I used nails and close pins to set the gussets. Adam Tippin A KR2S builder > On Feb 3, 2016, at 5:38 PM, Global Solutions via KRnet list.krnet.org> wrote: > > > > What tools aside from those listed here ie how many and what type of clamps > do you recommend for the glue up. > How many squares (to clamp to) should I make and of what size? > > Thanks > Stan > > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> I got the fever, I got the plans and I got the wood >Kr building question
I got the fever after going for a flight in Chris Gardner's bird last fall. I got the plans a few moths back and have the corvair build manual and a 110 hp engine I got the wood and plywood I built a sold bench I have a miter saw, radial arm, table saw level,square and an digital inclinometer as well as lots of light and an air compressor. I also acquired the resin and carbon fiber. What tools aside from those listed here ie how many and what type of clamps do you recommend for the glue up. How many squares (to clamp to) should I make and of what size? Thanks Stan
