KR> Ray Allen Trim System - Maintenace tip
OK I asked the following: > Has anyone had any operational problems with their Ray-Allen (MAC) > elevator trim? Now the elevator trim is acting up - works fine on the > ground including run up, but refuses to work in the air. Any body have any > suggestions? Just so you will know if you experience the same in the future - check your grounds - clean them and make sure they are tight - I did and now it works as good as before! Rick Human N202RH Houston, Texas
KR> Ray Allen Trim System
At 12:58 PM 10/12/2008, you wrote: >Has anyone had any operational problems with their >Rick Human +++ My Ray-Allen (MAC) elevator trim assembly is still working fine at 340 hours. The indicator LED assembly went out early on and I never bothered to get it repaired as I never referenced it and it was located in a hard to see area anyway. Later the servo unit was inop with blown fuses. I cut the power wire to the LED assembly and that fixed the problem. Larry Flesner
KR> Ray Allen Trim System
Has anyone had any operational problems with their Ray-Allen (MAC) elevator trim? Seems like with just at 100 hours things are starting to give up the ghost on N202RH. First to go was the pressure switch on my Hobbs meter. Now the elevator trim is acting up - works fine on the ground including run up, but refuses to work in the air. Any body have any suggestions? Tried to post this earlier today - but I don't think it went through - If you see it twice, you have my apology! Rick Human N202RH Houston, Texas