KR> aileron counter weight
Thanks Guys, Your remarks shed some light on my situation. Regards, Jaco Swanepoel South Africa KR2S, ZU-DVP __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
KR> aileron counter weight
Can someone tell me what the length of the counter weight arm is on the aileron. I cannot seem to find that information within the plans. Jeff
KR> aileron counter weight
On Thu, 07 Jul 2005 20:38:37 -0600 "wilder_jeff Wilder" writes: > > Can someone tell me what the length of the counter weight arm is on the > aileron. I cannot seem to find that information within the plans. > > Jeff As long as you can make it while not binding or rubbing on the aft spar. The longer the arm, the less weight you'll need. Jeff Scott Los Alamos, NM
KR> aileron counter weight
Can you tell me what your counterweight bar is made from? I have some 2x4x1/4 AL stock that I am trying to figure out if that will suffice for strength and length. -Jeff >From: jscott.pi...@juno.com >Reply-To: KRnet >To: kr...@mylist.net >Subject: Re: KR> aileron counter weight >Date: Thu, 7 Jul 2005 21:01:06 -0600 > > >On Thu, 07 Jul 2005 20:38:37 -0600 "wilder_jeff Wilder" > writes: > > > > Can someone tell me what the length of the counter weight arm is on the > > > aileron. I cannot seem to find that information within the plans. > > > > Jeff > >As long as you can make it while not binding or rubbing on the aft spar. >The longer the arm, the less weight you'll need. > >Jeff Scott >Los Alamos, NM > >___ >Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html
KR> aileron counter weight
I believe that everyone is recommending to use steel since we watched one fall off of Jim F. at the gathering at Red Oak 2 years ago. Believed to be aluminum fatigue. Joe On Fri, 08 Jul 2005 06:11:43 -0600 "wilder_jeff Wilder" writes: > Can you tell me what your counterweight bar is made from? > > I have some 2x4x1/4 AL stock that I am trying to figure out if that > will > suffice for strength and length. > > -Jeff > > >From: jscott.pi...@juno.com > >Reply-To: KRnet > >To: kr...@mylist.net > >Subject: Re: KR> aileron counter weight > >Date: Thu, 7 Jul 2005 21:01:06 -0600 > > > > > >On Thu, 07 Jul 2005 20:38:37 -0600 "wilder_jeff Wilder" > > writes: > > > > > > Can someone tell me what the length of the counter weight arm is > on the > > > > > aileron. I cannot seem to find that information within the > plans. > > > > > > Jeff > > > >As long as you can make it while not binding or rubbing on the aft > spar. > >The longer the arm, the less weight you'll need. > > > >Jeff Scott > >Los Alamos, NM > > > >___ > >Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > >to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > >please see other KRnet info at http://www.krnet.org/info.html > > > > ___ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > Joe Horton, Coopersburg, PA. joe.kr2s.buil...@juno.com
KR> aileron counter weight
Ours are 2 X 4 X 1/8. I believe that is what Jim Faughn had that broke. That does not mean that they will all break. Your aluminum is 1/4". I really don't think that will break, but your results will vary. See you in Mt. Vernon - 2005 - KR Gathering See N64KR at http://KR-Builder.org - Then click on the pics There is a time for building and a time for FLYING and the time for building has expired. Daniel R. Heath - Columbia, SC ---Original Message--- Can you tell me what your counterweight bar is made from?
KR> aileron counter weight
I used two pieces of 1/8" steel angle, bolted onto each other like a double L and taking the counterweight on one arm and clamping the aileron spar between them on the other. As long as would fit behind the rear spar. John Martindale Family 29 Jane Circuit Toormina NSW 2452 Australia ph: 61 2 66 584767 email: johnja...@optusnet.com.au
KR> aileron counter weight
I had some that were about 1/8 X 1. My ballance weights were right up to the aft spar and tear drop shaped so most of the weight was by the aft spar. Mine were easily less than half the weight of Jim's because his are on fairly short arms. The closer to the spar you can get them the better. Brian Kraut Engineering Alternatives, Inc. www.engalt.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Dan Heath Sent: Friday, July 08, 2005 7:49 PM To: kr...@mylist.net Subject: Re: KR> aileron counter weight Ours are 2 X 4 X 1/8. I believe that is what Jim Faughn had that broke. That does not mean that they will all break. Your aluminum is 1/4". I really don't think that will break, but your results will vary. See you in Mt. Vernon - 2005 - KR Gathering See N64KR at http://KR-Builder.org - Then click on the pics There is a time for building and a time for FLYING and the time for building has expired. Daniel R. Heath - Columbia, SC ---Original Message--- Can you tell me what your counterweight bar is made from? ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html