Re: DMI BIOS String
Hello Derek, On Tuesday 23 August 2011 06:30:13 Derek wrote: > I found 'virsh edit' is the recommended way to make changes to a VM > configuration, the XML file is not referenced at boot, it is only saved to > with 'virsh dumpxml'. 'virsh edit' will update both areas - hypervisor and > XML file. > > Unfortunately the changes I make for smbios and sysinfo (as below) while > editing don't appear to be accepted when saving with 'virsh edit'. I > wonder if they are perhaps not supported with virsh edit yet? If your domain is running, you get the config from the CURRENTLY RUNNING kvm process, but it is saved for the NEXT start. Just shutdown your current domain and restart it; rebooting from inside the domain (Ctrl-Alt-Del) is not enough, since a new kvm process needs to be forked. > Does anyone have experience with this, or an idea on why I would receive > 'bad file descriptor' errors using the kvm command manually. Perhaps you should switch over to the libvirt-ML. Sincerely Philipp Hahn -- Philipp Hahn Open Source Software Engineer h...@univention.de Univention GmbHLinux for Your Businessfon: +49 421 22 232- 0 Mary-Somerville-Str.1 D-28359 Bremen fax: +49 421 22 232-99 http://www.univention.de/ Treffen Sie Univention auf der IT&Business vom 20. bis 22. September 2011 auf dem Gemeinschaftsstand der Open Source Business Alliance in Stuttgart in Halle 3 Stand 3D27-7. signature.asc Description: This is a digitally signed message part.
Re: DMI BIOS String
I found 'virsh edit' is the recommended way to make changes to a VM configuration, the XML file is not referenced at boot, it is only saved to with 'virsh dumpxml'. 'virsh edit' will update both areas - hypervisor and XML file. Unfortunately the changes I make for smbios and sysinfo (as below) while editing don't appear to be accepted when saving with 'virsh edit'. I wonder if they are perhaps not supported with virsh edit yet? Does anyone have experience with this, or an idea on why I would receive 'bad file descriptor' errors using the kvm command manually. Thanks in advance, Derek On 23/08/2011, at 11:55 AM, Derek wrote: > Thanks everyone for the useful replies. > > I am using libvirt, one thing i'm observing after adding the following > sysinfo to the VM.xml file is that in the qemu log file for the VM it is not > being passed to the command when booting. > > >hvm > > > > > > xxx xxx > > > xxx > xxx xxx > xxx > xxx > > > > Is there a step i'm missing to have the xml file re-read after changes? > > Editing the xml file on the command line, and using libvirt to boot. > > FYI here is the command shown in the logs while booting.. > > LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin > HOME=/root USER=root LOGNAME=root QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M > pc-0.12 -enable-kvm -m 1024 -smp 2,sockets=2,cores=1,threads=1 -name Test > -uuid a8024009-d459-ad03-0fca-304746a93c8a -nodefaults -chardev > socket,id=monitor,path=/var/lib/libvirt/qemu/HMC.monitor,server,nowait -mon > chardev=monitor,mode=readline -rtc base=utc -boot d -drive > file=/install-images/install.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw > -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device > rtl8139,vlan=0,id=net0,mac=52:54:00:4e:80:a4,bus=pci.0,addr=0x3 -net > tap,fd=49,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device > isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:4 -vga cirrus -device > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 > char device redirected to /dev/pts/4 > > I tried running the above manually with -smbios type=1 etc added but I am > receiving bad file descriptor errors, perhaps my own error or inexperience > with KVM. > > Thanks! > Derek > > On 23/08/2011, at 8:03 AM, Ryan Harper wrote: > >> * Andrew Cathrow [2011-08-22 06:55]: >>> >>> >>> ----- Original Message - >>>> From: "Derek" >>>> To: kvm@vger.kernel.org >>>> Sent: Sunday, August 21, 2011 11:52:19 PM >>>> Subject: DMI BIOS String >>>> Hi Folks, >>>> >>>> I could not track down any solid info on modifying the DMI BIOS >>>> string. >>> >>> qemu-kvm -help | grep bios >>> >>> -smbios file=binary >> >> for binary mode, this commit message is most helpful >> >> >> commit b6f6e3d3a71cee61320216a42940cfaa9b42a162 >> Author: aliguori >> Date: Fri Apr 17 18:59:56 2009 + >> >> qemu: Add support for SMBIOS command line otions (Alex Williamson) >> >> Create a new -smbios option (x86-only) to allow binary SMBIOS entries >> to be passed through to the BIOS or modify the default values of >> individual fields of type 0 and 1 entries on the command line. >> >> Binary SMBIOS entries can be generated as follows: >> >> dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \ >> perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin >> >> These can then be passed to the BIOS using this switch: >> >>-smbios file=smbios_type_1.bin >> >> Command line generation supports the following syntax: >> >>-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] >>-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] >> [,uuid=$(uuidgen)][,sku=str][,family=str] >> >> For instance, to add a serial number to the type 1 table: >> >>-smbios type=1,serial=0123456789 >> >> Interface is extensible to support more fields/tables as needed. >> >> aliguori: remove texi formatting from help output >> >> Signed-off-by: Alex Williamson >> Signed-off-by: Anthony Liguori >> >> >>> -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] >>> -smbios type=1[,manufacturer=str][,product=str][,version=
Re: DMI BIOS String
Thanks everyone for the useful replies. I am using libvirt, one thing i'm observing after adding the following sysinfo to the VM.xml file is that in the qemu log file for the VM it is not being passed to the command when booting. hvm xxx xxx xxx xxx xxx xxx xxx Is there a step i'm missing to have the xml file re-read after changes? Editing the xml file on the command line, and using libvirt to boot. FYI here is the command shown in the logs while booting.. LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HOME=/root USER=root LOGNAME=root QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 1024 -smp 2,sockets=2,cores=1,threads=1 -name Test -uuid a8024009-d459-ad03-0fca-304746a93c8a -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/HMC.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot d -drive file=/install-images/install.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=52:54:00:4e:80:a4,bus=pci.0,addr=0x3 -net tap,fd=49,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:4 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/4 I tried running the above manually with -smbios type=1 etc added but I am receiving bad file descriptor errors, perhaps my own error or inexperience with KVM. Thanks! Derek On 23/08/2011, at 8:03 AM, Ryan Harper wrote: > * Andrew Cathrow [2011-08-22 06:55]: >> >> >> - Original Message - >>> From: "Derek" >>> To: kvm@vger.kernel.org >>> Sent: Sunday, August 21, 2011 11:52:19 PM >>> Subject: DMI BIOS String >>> Hi Folks, >>> >>> I could not track down any solid info on modifying the DMI BIOS >>> string. >> >> qemu-kvm -help | grep bios >> >> -smbios file=binary > > for binary mode, this commit message is most helpful > > > commit b6f6e3d3a71cee61320216a42940cfaa9b42a162 > Author: aliguori > Date: Fri Apr 17 18:59:56 2009 + > >qemu: Add support for SMBIOS command line otions (Alex Williamson) > >Create a new -smbios option (x86-only) to allow binary SMBIOS entries >to be passed through to the BIOS or modify the default values of >individual fields of type 0 and 1 entries on the command line. > >Binary SMBIOS entries can be generated as follows: > >dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \ >perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin > >These can then be passed to the BIOS using this switch: > > -smbios file=smbios_type_1.bin > >Command line generation supports the following syntax: > > -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] > -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] > [,uuid=$(uuidgen)][,sku=str][,family=str] > >For instance, to add a serial number to the type 1 table: > > -smbios type=1,serial=0123456789 > >Interface is extensible to support more fields/tables as needed. > >aliguori: remove texi formatting from help output > >Signed-off-by: Alex Williamson >Signed-off-by: Anthony Liguori > > >> -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] >> -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] >> >> or if you're using libvirt >> http://libvirt.org/formatdomain.html#elementsSysinfo >> >> >>> >>> For example, in VirtualBox you can use 'vboxmanage setsextradata' to >>> set the BIOS product and vendor string per VM. >>> >>> Any ideas if this is possible with KVM? >>> >>> Thanks, >>> Derek-- >>> To unsubscribe from this list: send the line "unsubscribe kvm" in >>> the body of a message to majord...@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- >> To unsubscribe from this list: send the line "unsubscribe kvm" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > Ryan Harper > Software Engineer; Linux Technology Center > IBM Corp., Austin, Tx > ry...@us.ibm.com > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: DMI BIOS String
* Andrew Cathrow [2011-08-22 06:55]: > > > - Original Message - > > From: "Derek" > > To: kvm@vger.kernel.org > > Sent: Sunday, August 21, 2011 11:52:19 PM > > Subject: DMI BIOS String > > Hi Folks, > > > > I could not track down any solid info on modifying the DMI BIOS > > string. > > qemu-kvm -help | grep bios > > -smbios file=binary for binary mode, this commit message is most helpful commit b6f6e3d3a71cee61320216a42940cfaa9b42a162 Author: aliguori Date: Fri Apr 17 18:59:56 2009 + qemu: Add support for SMBIOS command line otions (Alex Williamson) Create a new -smbios option (x86-only) to allow binary SMBIOS entries to be passed through to the BIOS or modify the default values of individual fields of type 0 and 1 entries on the command line. Binary SMBIOS entries can be generated as follows: dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \ perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin These can then be passed to the BIOS using this switch: -smbios file=smbios_type_1.bin Command line generation supports the following syntax: -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] [,uuid=$(uuidgen)][,sku=str][,family=str] For instance, to add a serial number to the type 1 table: -smbios type=1,serial=0123456789 Interface is extensible to support more fields/tables as needed. aliguori: remove texi formatting from help output Signed-off-by: Alex Williamson Signed-off-by: Anthony Liguori > -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] > -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] > > or if you're using libvirt > http://libvirt.org/formatdomain.html#elementsSysinfo > > > > > > For example, in VirtualBox you can use 'vboxmanage setsextradata' to > > set the BIOS product and vendor string per VM. > > > > Any ideas if this is possible with KVM? > > > > Thanks, > > Derek-- > > To unsubscribe from this list: send the line "unsubscribe kvm" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ryan Harper Software Engineer; Linux Technology Center IBM Corp., Austin, Tx ry...@us.ibm.com -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: DMI BIOS String
- Original Message - > From: "Derek" > To: kvm@vger.kernel.org > Sent: Sunday, August 21, 2011 11:52:19 PM > Subject: DMI BIOS String > Hi Folks, > > I could not track down any solid info on modifying the DMI BIOS > string. qemu-kvm -help | grep bios -smbios file=binary -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] or if you're using libvirt http://libvirt.org/formatdomain.html#elementsSysinfo > > For example, in VirtualBox you can use 'vboxmanage setsextradata' to > set the BIOS product and vendor string per VM. > > Any ideas if this is possible with KVM? > > Thanks, > Derek-- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: DMI BIOS String
On Mon, Aug 22, 2011 at 03:52:19PM +1200, Derek wrote: > Hi Folks, > > I could not track down any solid info on modifying the DMI BIOS string. > > For example, in VirtualBox you can use 'vboxmanage setsextradata' to > set the BIOS product and vendor string per VM. > > Any ideas if this is possible with KVM? If using QEMU directly you can use '-smbios' args. eg -smbios "type=0,vendor=LENOVO,version=6FET82WW (3.12 )" -smbios "type=1,manufacturer=Fedora,product=Virt-Manager,version=0.8.2-3.fc14,serial=32dfcb37-5af1-552b-357c-be8c3aa38310,uuid=c7a5fdbd-edaf-9455-926a-d65c16db1809,sku=1234567890,family=Red Hat" If using QEMU via libvirt you can use the following: http://libvirt.org/formatdomain.html#elementsSysinfo Daniel -- |: http://berrange.com -o-http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :| -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
DMI BIOS String
Hi Folks, I could not track down any solid info on modifying the DMI BIOS string. For example, in VirtualBox you can use 'vboxmanage setsextradata' to set the BIOS product and vendor string per VM. Any ideas if this is possible with KVM? Thanks, Derek-- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
