On Thu, 28 Mar 2002, Kurt Wagner wrote:
> Howdi Alex, > > On Fri, 22 Mar 2002, Alex Leyva wrote: > > > I've been triying with diferent values for burst, limit and latency, but > > we cant understand how to determine the correct values for them. > > > Now, how to set it depends on what you want to do. Which bursts do you > wan't to allow, and do you wan't to queue packets when the bucket is empty > (introducing additional delay...) or simply drop them? > > > We found different formulas to determine the size of the bucket, the > > latency and the limit, but they doesnt work for us, because we get > > incoherent values. > > If you have some rules of thumb for some sort of setup please post it, > could be interesting for other people too. However, the general rule is > that there is no general rule. ;-) We can't found any formula to determine the setup, but we founded some "rules", (something like conclusions): -limit is the size of something like a "prebuffer" for packets waiting for tockens to be available. -latency is the amount of time that a packet can sit waiting for tockens to be available. -For both values (limit and latency) if the limit (of size or time) is overpassed the packets are dropped. -There are NO formulas to determine the setup, there are only formulas to determine the critical or maximal values for the parameters. -If we are managing interactive traffic we must mantain the overlimit packets count down, and we must configure tbf with burst and LATENCY to do it. -If we are managing bulk traffic the overlimit count is non important, but we must know if the dropped packets are important, just like the TOS maximum reliability, and whe must use burst and LIMIT to do it. At now we have not probed with interactive traffic or nothing else, just with ttcp, with to pentium II over a ethernet, directly connected, and the results was really good. > > > We have another question, what is the normal values for dropped and > > overlimit?. > > We have: > > qdisc tbf 110: dev eth1 rate 1Mbit burst 20Kb/8 mpu 0b [0001f400] limit > > 40Kb lat 190.7ms > > Sent 17542230 bytes 11591 pkts (dropped 36, overlimits 35216) > > > > is this normal?. > > Hmm, 17MByte transmitted with 11591 packets, so your packets are > approximately 1500 bytes long in average, which makes me guess it > was a file transfer with TCP and 1.5KB MTU? The values are ok if > that's the case... > We are using ttcp to make the test, with the default values. We think that if we get better results and we get conclusions more solid we could contribute it to the howto =-). > > bye, > Kurt > > > _______________________________________________ > LARTC mailing list / [EMAIL PROTECTED] > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
