[LARTC] Wondershaper only shaping one connection?
Hello, LARTC-List I still try to get my traffic-shaping done with Wondershaper 1.1a, but it does not work as expected. When I run the script, the verbose output looks good (using a SuSE-8.2-SMP-box with iproute2-2.4.7-473): + DOWNLINK=1800 + UPLINK=150 + DEV=ppp0 + NOPRIOHOSTSRC= + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + '[' '' = status ']' + tc qdisc del dev ppp0 root + tc qdisc del dev ppp0 ingress + '[' '' = stop ']' + tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit + tc class add dev ppp0 parent 1: classid 1:1 cbq rate 150kbit allot 1500 prio 5 bounded isolated + tc class add dev ppp0 parent 1:1 classid 1:10 cbq rate 150kbit allot 1600 prio 1 avpkt 1000 + tc class add dev ppp0 parent 1:1 classid 1:20 cbq rate 135kbit allot 1600 prio 2 avpkt 1000 + tc class add dev ppp0 parent 1:1 classid 1:30 cbq rate 120kbit allot 1600 prio 2 avpkt 1000 + tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10 + tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10 + tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10 + tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10 + tc filter add dev ppp0 parent 1:0 protocol ip prio 11 u32 match ip protocol 1 0xff flowid 1:10 + tc filter add dev ppp0 parent 1: protocol ip prio 12 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x 0xffc0 at 2 flowid 1:10 + tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20 + tc qdisc add dev ppp0 handle : ingress + tc filter add dev ppp0 parent : protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1 My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the values are allright. I then start an upload and am pleased to see that the upload-rate stays at 150kBit, as set. Pings then are fine. But that upload limit is somehow not really enforced. When starting a second upload, the total rate (checked with iptraf) exceeds the set 150kBit and is only restricted by the line limit - pings of well over 3 seconds are the result. What did I do wrong? -- Sincerely, Michael ___ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] Wondershaper working, but not quite as expected
Hallo, Trevor > Maybe we can help you out much better if you could space out the > sentences below. They seem to be a jigsaw puzzle. Sorry, you are right - I think my word-wrapping is messing this up. I'll post it again, disregarding line lengths. This is the verbose output when the script starts: + DOWNLINK=1800 + UPLINK=150 + DEV=ppp0 + NOPRIOHOSTSRC= + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + '[' '' = status ']' + tc qdisc del dev ppp0 root + tc qdisc del dev ppp0 ingress + '[' '' = stop ']' + tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit + tc class add dev ppp0 parent 1: classid 1:1 cbq rate 150kbit allot 1500 prio 5 bounded isolated + tc class add dev ppp0 parent 1:1 classid 1:10 cbq rate 150kbit allot 1600 prio 1 avpkt 1000 + tc class add dev ppp0 parent 1:1 classid 1:20 cbq rate 135kbit allot 1600 prio 2 avpkt 1000 + tc class add dev ppp0 parent 1:1 classid 1:30 cbq rate 120kbit allot 1600 prio 2 avpkt 1000 + tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10 + tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10 + tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10 + tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10 + tc filter add dev ppp0 parent 1:0 protocol ip prio 11 u32 match ip protocol 1 0xff flowid 1:10 + tc filter add dev ppp0 parent 1: protocol ip prio 12 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x 0xffc0 at 2 flowid 1:10 + tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20 + tc qdisc add dev ppp0 handle : ingress + tc filter add dev ppp0 parent : protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1 This is the status information while running: + DOWNLINK=1800 + UPLINK=150 + DEV=ppp0 + NOPRIOHOSTSRC= + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + '[' status = status ']' + tc -s qdisc ls dev ppp0 qdisc ingress : Sent 264605 bytes 1195 pkts (dropped 0, overlimits 0) qdisc sfq 30: limit 128p quantum 1492b perturb 10sec Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 20: limit 128p quantum 1492b perturb 10sec Sent 390490 bytes 610 pkts (dropped 0, overlimits 0) qdisc sfq 10: limit 128p quantum 1492b perturb 10sec Sent 47228 bytes 942 pkts (dropped 0, overlimits 0) qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit Sent 437758 bytes 1553 pkts (dropped 0, overlimits 2037) borrowed 0 overactions 0 avgidle 624 undertime 0 + tc -s class ls dev ppp0 class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 40 bytes 1 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 150Kbit prio 1 Sent 47288 bytes 943 pkts (dropped 0, overlimits 351) borrowed 0 overactions 94 avgidle 624 undertime 0 class cbq 1:1 parent 1: rate 150Kbit (bounded,isolated) prio 5 Sent 437778 bytes 1553 pkts (dropped 0, overlimits 0) borrowed 161 overactions 0 avgidle 624 undertime 0 class cbq 1:20 parent 1:1 leaf 20: rate 135Kbit prio 2 Sent 390490 bytes 610 pkts (dropped 0, overlimits 1868) borrowed 161 overactions 263 avgidle 624 undertime 0 class cbq 1:30 parent 1:1 leaf 30: rate 120Kbit prio 2 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 + exit I hope this helps. -- Gruß, Michael aka. Tron ___ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
[LARTC] Wondershaper working, but not quite as expected
Hello, LARTC-List I try to get my traffic-shaping done with Wondershaper 1.1a. When I run the script, the verbose output looks good (using a SuSE-8.2-box with iproute2-2.4.7-473): + DOWNLINK=1800 + UPLINK=150 + DEV=ppp0 + NOPRIOHOSTSRC= + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + '[' '' = status ']' + tc qdisc del dev ppp0 root + tc qdisc del dev ppp0 ingress + '[' '' = stop ']' + tc qdisc add dev ppp0 root handle 1: htb default 20 + tc class add dev ppp0 parent 1: classid 1:1 htb rate 150kbit burst 6k + tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 150kbit burst 6k prio 1+ tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 135kbit burst 6k prio 2+ tc class add dev ppp0 parent 1:1 classid 1:30 htb rate 120kbit burst 6k prio 2+ tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10+ tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip protocol 1 0xff flowid 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 10 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x 0xffc0 at 2 match u8 0x10 0xff at 33 flowid 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20+ tc qdisc add dev ppp0 handle : ingress + tc filter add dev ppp0 parent : protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1 My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the values are allright. I then start an upload and am pleased to see that the upload-rate stays at 150kBit, as set. Pings then are fine. But that upload limit is somehow not really enforced. When starting a second upload, the total rate (checked with iptraf) exceeds the set 150kBit and is only restricted by the line limit - pings of well over 3 seconds are the result. What did I do wrong here? -- Cheers, Michael aka. Tron ___ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
