Re: [LARTC] Bonding + Shaping -- Is it Possible?
Hello AllAny Body, Any Thoughts?Any Kind of feedback or suggestion is a welcome...KartheeKKartheeK [EMAIL PROTECTED] wrote: Hello All,Has Any body of you worked on such a set up?KartheeKKartheeK [EMAIL PROTECTED] wrote: Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST)From: KartheeK [EMAIL PROTECTED]To: lartc@mailman.ds9a.nlSubject: [LARTC] Bonding + Shaping -- Is it Possible? Hello All,I was curious to know if I can do traffic shaping on abonded Interface?Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ??ThanksKartheeK Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___LARTC mailing listLARTC@mailman.ds9a.nlhttp://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___LARTC mailing listLARTC@mailman.ds9a.nlhttp://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc___LARTC mailing listLARTC@mailman.ds9a.nlhttp://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] Bonding + Shaping -- Is it Possible?
I have bonded two interfaces in mode 0 for load balancing and link sharing.My understanding is that "traffic control" happens, below bonding and hence this should be possible. I am currently short of lab equipments and am planning to try this some time this week end...I am curious about similar implemantations and/or thoughts,,ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË [EMAIL PROTECTED] wrote: I tryed to do some iptables rules on bonded interfaces and that didn'tworked. I had to use "ebtables".BTW, what kind of bonding do you use?÷ ðÎÄ, 21/08/2006 × 13:05 +0100, KartheeK ÐÉÛÅÔ: Hello All Any Body, Any Thoughts? Any Kind of feedback or suggestion is a welcome... KartheeK KartheeK <[EMAIL PROTECTED]> wrote: Hello All, Has Any body of you worked on such a set up? KartheeK KartheeK <[EMAIL PROTECTED]> wrote: Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST) From: KartheeK <[EMAIL PROTECTED]> To: lartc@mailman.ds9a.nl Subject: [LARTC] Bonding + Shaping -- Is it Possible? Hello All, I was curious to know if I can do traffic shaping on abonded Interface? Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ?? Thanks KartheeK __ Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc__ Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc __ Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc-- ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË <[EMAIL PROTECTED]> Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] Bonding + Shaping -- Is it Possible?
Hello All,I was curious to know if I can do traffic shaping on abonded Interface?Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ??ThanksKartheeK Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] Bonding + Shaping -- Is it Possible?
Hello All,Has Any body of you worked on such a set up?KartheeKKartheeK [EMAIL PROTECTED] wrote: Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST)From: KartheeK [EMAIL PROTECTED]To: lartc@mailman.ds9a.nlSubject: [LARTC] Bonding + Shaping -- Is it Possible? Hello All,I was curious to know if I can do traffic shaping on abonded Interface?Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ??ThanksKartheeK Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___LARTC mailing listLARTC@mailman.ds9a.nlhttp://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc Here's a new way to find what you're looking for - Yahoo! Answers Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] Wanted Good Documentation on HFSC
Hello All, I am trying to prioratize VOIP traffic from data. The follwing link says that HFSC is better than HTB for shaping VOIP traffic. http://www.voip-info.org/wiki-QoS+Linux+with+HFSC I am in search of good documentation to start with HFSC, I am unable to understand the parameters used. I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To good HFSC stuff.... Regards KartheeK Yahoo! India Matrimony: Find your life partner online.___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] Re: Equal bandwidth for any client
Hi, If you are running brctl tool on the linux box then there is a command that will automatically determine the number ofMAC addressesin the network #brctl showmacs bridge nameport number of ur lan interfce grep -v -w port | wc -l Ex: #brctl showmacsabcd 1 grep -v -w port| wc -l Note that, for this to work your box should be confogurred as a bridge in promiscuous mode I use this method to automatically determine the number of MAC addresses in my LAN.. Use this in combination with crontab to do the job.. Hope, this helps. Regards KartheeK Yahoo! India Matrimony: Find your life partner online.___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] Re: Equal bandwidth for any client
Hi, If you are running brctl tool on the linux box then there is a command that will automatically determine the number ofMAC addressesin the network #brctl showmacs bridge nameport number of ur lan interfce grep -v -w port | wc -l Ex: #brctl showmacsabcd 1 grep -v -w port| wc -l Note that, for this to work your box should be confogurred as a bridge in promiscuous mode I use this method to automatically determine the number of MAC addresses in my LAN.. Use this in combination with crontab to do the job.. Hope, this helps. Regards KartheeK Yahoo! India Matrimony: Find your life partner online.___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] wanted A tool to measure bandwidth....
Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hostsBut I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only I tried installing traffic-vis, its not working properly and there is know documentation of how to get it running. I also tried ntop, it installs, but dosent work. I have been scratching my head for the past one week So my problem: I am in search of a tool that measures bandwidth consumed by each host on my LAN without requiring SNMP to run on the hosts... Now, is there any tool Any input regarding the matter is a welcome. Infinite Thanx in Advance. Regards KartheeK Yahoo! India Matrimony: Find your life partner online.___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] LOADBALANCING+BRIDGING---is it possible on the same machine??
Hello All,I have a linux box running with three NIC's, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCEROn some googling i found the following linkhttp://lartc.org/howto/lartc.rpdb.multiple-links.htmlThis HOWTO requires me to have one ip address for each NIC, while i dont in my case...Now, is BRIDGING+LOAD BALANCING possibe on the same machine??? Any sort of inputs regarding the matter is most welcome Thanx in advanceKARTHEEK Yahoo! India Matrimony: Find your life partner online.___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] how to bring down htb rate to 3kbit?
Hello Everybody, I am successful in throttling down the Bandwidth to 8kbit using HTB. Below that I get report to change r2q. I want to bring down the Leaf class Bandwidth to 3kbit. My script is as below: Tc Script to throttle down the Bandwidth to 8kbit based on MAC address and IP address tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 htb default 30 r2q 1 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 24kbit ceil 24kbit quantum 1514 tc class add dev eth0 parent 1:1 classid 1:10 htb rate 8kbit ceil 8kbit tc qdisc add dev eth0 parent 1:10 handle 10:0 sfq tc class add dev eth0 parent 1:1 classid 1:20 htb rate 8kbit ceil 8kbit tc qdisc add dev eth0 parent 1:20 handle 20:0 sfq tc class add dev eth0 parent 1:1 classid 1:30 htb rate 8kbit ceil 8kbit tc qdisc add dev eth0 parent 1:30 handle 30:0 sfq tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.10.163 flowid 1:10 tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match u32 0x11e6bd53 0x at -12 match u16 0x0011 0x at -14 flowid 1:20 If I am to Throttle down the Leaf class Bandwidth to 3kbit what should be the value of root qdisc r2q?? and what should be the value of root class quantum?? Plz Plz Help Regards Kartheek Yahoo! India Matrimony: Find your life partner online.___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
