Re: Re:[LARTC] simple(?!?) source routing
Hi, Found the problem, usb timeout errors in /var/log.messages relating to speedtouch modems, had the problem before so its nothing new. Thanks again, Chris - Original Message - From: "Chris Bolton" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, January 15, 2004 8:37 AM Subject: Fw: Re:[LARTC] simple(?!?) source routing > Hi, > > Thanks for the reply. Thats where the problem starts. If I set ppp0 as > the > default gw the internet doesnt work anymore. This is how im doing it... > > route del default > route add default gw 217.32.81.74 dev ppp0 > > if I put it back to ppp1... > > route del default > route add default gw 217.32.68.73 dev ppp1 > > It works fine again. Whats up with that? > > Cheers, > Chris > - Original Message - > From: "andybr" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Thursday, January 15, 2004 1:11 AM > Subject: Re:[LARTC] simple(?!?) source routing > > > > Hi all, > > > > This is easy. First let ppp0 as your default gateway and > > use iproute to create a table call any name you want and > > then you put ppp1 default route inside that table. After > > that you have to create a rule to put the host you would > > like insede it and dont forget to put a rule in the > > iptables saying that everything going out via ppp1 SNAT - > > -to IP_PPP1_EXTERNAL. ;) > > > > []´s > > Anderson > > > > > > > Hi, > > > > > > I've set up a Linux box with redhat on to act as an int > > ernet gateway and I'm running into a few problems. Its g > > ot two adsl modems connected to it, both connected to sep > > erate 512kbs lines. Now I've followed the simple source > > routing in the advanced routing howto to the letter but i > > t doesnt work. > > > > > > I've got it autoconnecting on startup and redhat puts p > > pp1 as the default gateway, this is then setup for masque > > rading for the entire network. Therefore I've tried sett > > ing up ppp0 as the deafult gateway for only one computer > > (10.0.0.11), as it says at http://lartc.org/howto/lartc.r > > pdb.html#LARTC.RPDB.SIMPLE I've done everything it says t > > here and im 99% sure I've put the right ip addreses in et > > c. When Ive gone through it that computer is no longer a > > ble to access the net (the rest of the network is unaffec > > ted). > > > > > > I'm pretty sure its the way ppp0 is configured, if I se > > t it up so 10.0.0.11 uses ppp1 instead of ppp0 (ip rule a > > dd default via xxx.xxx.xxx.xxx dev ppp1 table chris) it w > > orks fine but obviously thers no point in that. > > > > > > Hope all this makes sence to someone, it baerly does ti > > me. May thanks in advance. > > > > > > Chris > > > > > > > __ > > Acabe com aquelas janelinhas que pulam na sua tela. > > AntiPop-up UOL - É grátis! > > http://antipopup.uol.com.br/ > > > > > > ___ > > LARTC mailing list / [EMAIL PROTECTED] > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > > ___ > LARTC mailing list / [EMAIL PROTECTED] > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > ___ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Fw: Re:[LARTC] simple(?!?) source routing
Hi, Thanks for the reply. Thats where the problem starts. If I set ppp0 as the default gw the internet doesnt work anymore. This is how im doing it... route del default route add default gw 217.32.81.74 dev ppp0 if I put it back to ppp1... route del default route add default gw 217.32.68.73 dev ppp1 It works fine again. Whats up with that? Cheers, Chris - Original Message - From: "andybr" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, January 15, 2004 1:11 AM Subject: Re:[LARTC] simple(?!?) source routing > Hi all, > > This is easy. First let ppp0 as your default gateway and > use iproute to create a table call any name you want and > then you put ppp1 default route inside that table. After > that you have to create a rule to put the host you would > like insede it and dont forget to put a rule in the > iptables saying that everything going out via ppp1 SNAT - > -to IP_PPP1_EXTERNAL. ;) > > []´s > Anderson > > > > Hi, > > > > I've set up a Linux box with redhat on to act as an int > ernet gateway and I'm running into a few problems. Its g > ot two adsl modems connected to it, both connected to sep > erate 512kbs lines. Now I've followed the simple source > routing in the advanced routing howto to the letter but i > t doesnt work. > > > > I've got it autoconnecting on startup and redhat puts p > pp1 as the default gateway, this is then setup for masque > rading for the entire network. Therefore I've tried sett > ing up ppp0 as the deafult gateway for only one computer > (10.0.0.11), as it says at http://lartc.org/howto/lartc.r > pdb.html#LARTC.RPDB.SIMPLE I've done everything it says t > here and im 99% sure I've put the right ip addreses in et > c. When Ive gone through it that computer is no longer a > ble to access the net (the rest of the network is unaffec > ted). > > > > I'm pretty sure its the way ppp0 is configured, if I se > t it up so 10.0.0.11 uses ppp1 instead of ppp0 (ip rule a > dd default via xxx.xxx.xxx.xxx dev ppp1 table chris) it w > orks fine but obviously thers no point in that. > > > > Hope all this makes sence to someone, it baerly does ti > me. May thanks in advance. > > > > Chris > > > __ > Acabe com aquelas janelinhas que pulam na sua tela. > AntiPop-up UOL - É grátis! > http://antipopup.uol.com.br/ > > > ___ > LARTC mailing list / [EMAIL PROTECTED] > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > ___ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re:[LARTC] simple(?!?) source routing
Hi all, This is easy. First let ppp0 as your default gateway and use iproute to create a table call any name you want and then you put ppp1 default route inside that table. After that you have to create a rule to put the host you would like insede it and dont forget to put a rule in the iptables saying that everything going out via ppp1 SNAT - -to IP_PPP1_EXTERNAL. ;) []´s Anderson > Hi, > > I've set up a Linux box with redhat on to act as an int ernet gateway and I'm running into a few problems. Its g ot two adsl modems connected to it, both connected to sep erate 512kbs lines. Now I've followed the simple source routing in the advanced routing howto to the letter but i t doesnt work. > > I've got it autoconnecting on startup and redhat puts p pp1 as the default gateway, this is then setup for masque rading for the entire network. Therefore I've tried sett ing up ppp0 as the deafult gateway for only one computer (10.0.0.11), as it says at http://lartc.org/howto/lartc.r pdb.html#LARTC.RPDB.SIMPLE I've done everything it says t here and im 99% sure I've put the right ip addreses in et c. When Ive gone through it that computer is no longer a ble to access the net (the rest of the network is unaffec ted). > > I'm pretty sure its the way ppp0 is configured, if I se t it up so 10.0.0.11 uses ppp1 instead of ppp0 (ip rule a dd default via xxx.xxx.xxx.xxx dev ppp1 table chris) it w orks fine but obviously thers no point in that. > > Hope all this makes sence to someone, it baerly does ti me. May thanks in advance. > > Chris __ Acabe com aquelas janelinhas que pulam na sua tela. AntiPop-up UOL - É grátis! http://antipopup.uol.com.br/ ___ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
