Hi analog,
A couple of suggestions:
1. What version of LabVIEW are you using? Are you loading code
written in a previous version of LabVIEW into a newer version of
LabVIEW and/or using global variables? Refer to a
href=http://digital.ni.com/public.nsf/websearch/4C8994FAEEDAB09A86256C7D0068A3C6?OpenDocument;KB
2RPC1EHW. When I Update My Code to LabVIEW 6.1 I Get the memory could
not be read Error/a.
2. You might not be closing references somewhere in your application.
Check where you are using reference numbers: file I/O, DAQ GAPI,
control and VI references, etc.
Also if you are calling DLLs anywhere or ActiveX controls, make sure
you you are handling them correctly and not leaving things open.
3. If you're using an older version of LabVIEW, try upgrading to the
latest version 7.1 and see if the problem still occurs. If you do not
have the full installation of version 7.1 available, you can download
an evaluation copy from our website. Give that a try and see if the
problem has been resolved in LabVIEW 7.1.
Thanks and good luck!
Kileen C.
Applications Engineer
National Instruments