Re: [leaf-user] Sending mail from a script
I wish to thank everyone who replied so promptly to my message. I appreciate all the help. I knew this had to be simple, but I was having a brain freeze. With you help I was able to get the script running in 2 minutes. Thanks again to all. Best Regards, Roger McClurg [EMAIL PROTECTED] This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. Charles Steinkuehler charles @steinkuehler.net 03/22/2004 05:01 PM To: Roger E McClurg/CEG/[EMAIL PROTECTED] cc: leaf [EMAIL PROTECTED] Subject:Re: [leaf-user] Sending mail from a script Roger E McClurg wrote: I know that mail messages are normally terminated with a control-d. Can someone please tell me how to end a mail message when it is sent from a script file in Bering? I know it is a simple trick, but for the life of me I cant remember it. control-d is the keyboard equivelent for end-of-file. You can simply pipe something to (or otherwise redirect the input of) the mail command, which will correctly identify the end of file, ie: echo hello world | mail -s test [EMAIL PROTECTED] -or- mail -s test [EMAIL PROTECTED] /my/test/message -- Charles Steinkuehler [EMAIL PROTECTED] --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
[leaf-user] Multicast problem
Hi all, I've just compiled mrouted 3.9beta under bering-uclibc with buildtool. Even it seems that the kernel shipped with the distro was compiled with the option CONFIG_IP_MULTICAST=y, but I get: mrouted: 21:50:49.026 can't enable Multicast routing in kernel: Protocol not available Any ideas? Lino --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] Multicast problem
Lino, I think you need to enable CONFIG_IP_MROUTE in the kernel for mrouted to work. Eric Hi all, I've just compiled mrouted 3.9beta under bering-uclibc with buildtool. Even it seems that the kernel shipped with the distro was compiled with the option CONFIG_IP_MULTICAST=y, but I get: mrouted: 21:50:49.026 can't enable Multicast routing in kernel: Protocol not available Any ideas? Lino --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
RE: [leaf-user] Looking for a VPN Solution
It has PPTP server built in and boots from a CD-ROM while the configuration is saved to a floppy. There are some known problems with some XP clients. Are they using ppp-2.4.2x and poptop-1.1.4x? The XP problems can be solved via iptables clamps (clamp-mss-to-pmtu I believe), or using an ip-up hack. P --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
RE: [leaf-user] Difficulty assigning multiple IP addresses
Hi everyone! O.K. Per Charles Tom's suggestions (thank you, gentlemen), I decided to try and assign my additional IP addresses in the /etc/network/interfaces. I tried to assign them in, at first, 2 different ways...neither one of which worked. I tried: auto eth0 iface eth0 inet static address 66.60.172.201 netmask 255.255.255.0 broadcast 66.60.172.255 gateway 66.60.172.205 auto eth0:0 iface eth0 inet static address 66.60.172.202 netmask 255.255.255.0 broadcast 66.60.172.255 auto eth0:1 iface eth0 inet static address 66.60.172.203 netmask 255.255.255.0 broadcast 66.60.172.255 Etc, etc... And then a subtle variation: auto eth0 iface eth0 inet static address 66.60.172.201 netmask 255.255.255.0 broadcast 66.60.172.255 gateway 66.60.172.205 auto eth0 iface eth0:0 inet static address 66.60.172.202 netmask 255.255.255.0 broadcast 66.60.172.255 auto eth0 iface eth0:1 inet static address 66.60.172.203 netmask 255.255.255.0 broadcast 66.60.172.255 Etc, etc... But neither way worked. The good new is that Tom's suggestion of ip addr add 66.60.172.202/24 brd 66.60.172.255 \dev eth0 label eth0:0, etc works great. I can immediately ping all addresses, and ip addr lists them all. Yippee! But, I don't know what to back up (which .lrp package) to save my changes??? Also, what file(s) were modified by using this method(out of curiosity)? Finally, I have a box on the local LAN that will host a web server, and has MS Terminal Services running on that I want to be able to connect to, so my guess is that I need to follow Tom's FAQ 1c and make entries like: In /etc/shorewall/rules: #ACTION SOURCEDESTPROTO DEST PORT(S) DNAT net loc:192.168.1.201 tcp 80 DNAT net loc:192.168.1.201 tcp 1494 DNAT net loc:192.168.1.201 tcp 3389 Does this look right? Thank you all for your help! Craig --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70alloc_id638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
RE: [leaf-user] Looking for a VPN Solution
Neither. He is using MPD. This is based on FreeBSD 4.9. PoPTop wasn't an option because it doesn't run in userland and he wants to make it as secure as possible. -Original Message- From: Peter Mueller [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 24, 2004 11:15 AM To: 'Ping Kwong'; 'JamesSturdevant'; [EMAIL PROTECTED] Subject: RE: [leaf-user] Looking for a VPN Solution It has PPTP server built in and boots from a CD-ROM while the configuration is saved to a floppy. There are some known problems with some XP clients. Are they using ppp-2.4.2x and poptop-1.1.4x? The XP problems can be solved via iptables clamps (clamp-mss-to-pmtu I believe), or using an ip-up hack. P --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] Difficulty assigning multiple IP addresses
Craig Caughlin wrote: Hi everyone! O.K. Per Charles Tom's suggestions (thank you, gentlemen), I decided to try and assign my additional IP addresses in the /etc/network/interfaces. I tried to assign them in, at first, 2 different ways...neither one of which worked. I tried: snip /etc/network/interfaces examples But neither way worked. The good new is that Tom's suggestion of ip addr add 66.60.172.202/24 brd 66.60.172.255 \dev eth0 label eth0:0, etc works great. I can immediately ping all addresses, and ip addr lists them all. Yippee! But, I don't know what to back up (which .lrp package) to save my changes??? Also, what file(s) were modified by using this method(out of curiosity)? To save your changes, backup etc.lrp. The file modified is /etc/network/interfaces which you edited. No other files are dynamically modified when you make changes to this file. -- Charles Steinkuehler [EMAIL PROTECTED] --- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470alloc_id=3638op=click leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html