RE: [Leaf-user] pppd timing out.

[Mark Lubratt]

I want dial-on-demand during non-business hours, but I also want the link
always up during business hours.  I understand that pppd can now do on
demand dialing, but will it also do a scheduled link?  With diald I can
force the link up in the morning during the week and then let it go back to
on-demand at the end of the business day.

Is this also possible in pppd?

BTW, I also figured out that the configuration files from pppd.lrp were
conflicting with the configuration files from diald.  When I extracted only
chat and pppd from the pppd.lrp file and then added them to the diald
package, everything started working.

Mark

-Original Message-
From: Richard Doyle [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 15, 2002 10:28 AM
To: Mark Lubratt; [EMAIL PROTECTED]
Subject: RE: [Leaf-user] pppd timing out.


Why do you need diald? Recent versions of pppd support dial-on-demand.
If my experience is any guide, get pppd working, then try diald if
needed.

-Richard

 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED]]On Behalf Of
 Mark Lubratt
 Sent: Monday, January 14, 2002 11:04 PM
 To: [EMAIL PROTECTED]
 Subject: [Leaf-user] pppd timing out.


 Hi!

 I've been banging my head against a wall for about 3 days
 now.  I have a LRP
 system running on a 486 (dachstein 1.02).

 The system is supposed to be a router/firewall for a small
 home network.  It
 will serve DHCP as well.  The eth0 interface is on the local network.

 I want to have diald working on it so that I can force a link
 during the day
 and make other times be on demand.  I have the diald22.lrp
 package as well
 as the pppd.lrp package installed.  I recompiled the kernel
 (2.2.19-3-LEAF)
 to incorporate the serial drivers directly into the kernel
 (serial.o didn't
 seem to work).  I'm using the slip, slhc, ppp, ppp_deflate
 and bsd_comp
 modules.

 The system seems to be dialing and connecting to my ISP just
 fine.  I get a
 message in syslog that ppp0 has been registered and then immediately a
 message talking about initializing the modem.  It would seem
 that pppd is
 hanging or dying early.

 If looked all throught the mail archives and deja.com.
 People keep refering
 to mail messages where this has been solved, but I can't seem
 to find them.
 Does anyone out there have a working diald/pppd LRP setup??

 Any help here would be greatly appreciated!

 Mark


 ___
 Leaf-user mailing list
 [EMAIL PROTECTED]
 https://lists.sourceforge.net/lists/listinfo/leaf-user



___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user

[Leaf-user] Dachstein LRP and a serial port modem

[Mark Lubratt]

Greetings all!

I'm trying to set up LRP using the dachstein image on a 486 with a serial
port modem and diald.  I have almost everything configured and apparently
working except the modem.  I try to communicate with it through /dev/ttyS0
(it is COM1), but all that I get is the following error:

cannot create /dev/ttyS0: error 19

This would indicate to me that the proper module isn't in the kernel.  I
have added serial, slhc, slip, ppp and ppp_deflate.  Is there another module
I need to load??

Any pointers in the proper direction would be appreciated!

TIA!
Mark


___
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user