[Leaf-user] Dachstein LRP
All, Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is booting of an IDE hard drive? It is booting in a DOS partition and runs in RAM Thanks in advance for any help Peter ___ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
Re: [Leaf-user] Dachstein LRP
Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is booting of an IDE hard drive? It is booting in a DOS partition and runs in RAM Yes. The /linuxrc script will look for the pkgpath.cfg and lrpkg.cfg files on your boot= device (probably your HDD). Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) ___ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
Re: [Leaf-user] Dachstein LRP
Thanks Charles, I tried it but it failed. What if anything remains in the syslinux.cfg file? Do you include the LRP= and PKGPATH= in the new file? Do you leave them blank in the old one? Thanks. P.S. Congratulations on a job very well done on the LRP box Peter - Original Message - From: Charles Steinkuehler [EMAIL PROTECTED] To: Peter Kanatselis [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, March 08, 2002 11:21 AM Subject: Re: [Leaf-user] Dachstein LRP Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is booting of an IDE hard drive? It is booting in a DOS partition and runs in RAM Yes. The /linuxrc script will look for the pkgpath.cfg and lrpkg.cfg files on your boot= device (probably your HDD). Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) ___ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
Re: [Leaf-user] Dachstein LRP
Thanks Charles, I tried it but it failed. What if anything remains in the syslinux.cfg file? Do you include the LRP= and PKGPATH= in the new file? Do you leave them blank in the old one? You might want to see the CD-ROM readme file...it goes over the use of these settings in a bit more detail. When the system boots, the /linuxrc script searches the kernel command line for a boot= parameter, and tries to mount the specified device. If the lrpkg.cfg and/or pkgpath.cfg files are found on this device, the contents of those files override the kernel command line settings provided by syslinux.cfg. Therefore, if you've got lrpkg.cfg and pkgpath.cfg files, the contents of LRP= and PGKPATH= in syslinux.cfg are don't care, and can even be blank. Both files should have a single line of data, which is *EXACTLY* what would come after LRP= or PKGPATH= on the kernel command line. LRP= and PKGPATH= should *NOT* appear in these files. Again, refer to the CD-ROM readme for details... Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) ___ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
[Leaf-user] Dachstein LRP and a serial port modem
Greetings all! I'm trying to set up LRP using the dachstein image on a 486 with a serial port modem and diald. I have almost everything configured and apparently working except the modem. I try to communicate with it through /dev/ttyS0 (it is COM1), but all that I get is the following error: cannot create /dev/ttyS0: error 19 This would indicate to me that the proper module isn't in the kernel. I have added serial, slhc, slip, ppp and ppp_deflate. Is there another module I need to load?? Any pointers in the proper direction would be appreciated! TIA! Mark ___ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
Re: [Leaf-user] Dachstein LRP, problem with gateway
I am trying to make the Dachstein LRP to work as a firewall at home. The problem is that it does not use my ISP gateway, i.e. I am not possiblet o reach anything beyond the gateway. However, if I use the Eigerstein Static LRP, which have the same setup it works fine. Netstat shows 3 entry in the Egerstien, but the last (default) is missing in Dachstein. Where do I fix this? This is a bug...it will be fixed in the next release, which I hope to get to soon (currently side-tracked working on the CD image). In the mean time, it's easy enough to fix yourself: In /etc/network.conf, find the if_up () procedure. Towards the end of this procedure, you will find the following lines: # Default route support [ -n $DEFAULT_GW ] \ ip route replace default nexthop via $DEFAULT_GW dev $1 Change the last line to: ip route replace default via $DEFAULT_GW dev $1 Note the removal of the 'nexthop' parameter. Charles Steinkuehler http://lrp.steinkuehler.net http://c0wz.steinkuehler.net (lrp.c0wz.com mirror) ___ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
