[leaf-user] WISP-DIST hostap_plx issues
Hello all- I am having a strange issue with my Prism 2.5 card (USR 2445)... Unfortunately my WISP box is sufficiently fubar'ed that it really didn't provide much good diagnostic information, so I threw it into my RH7.3 box and got the following: hermes.c: 16 Jan 2002 David Gibson <[EMAIL PROTECTED]> orinoco.c 0.09b (David Gibson <[EMAIL PROTECTED]> and others) orinoco_plx.c 0.09b (Daniel Barlow <[EMAIL PROTECTED]>) orinoco_plx: CIS: 5201:CA03:5600:F800:85FF:C817:2A04:8A67:7C5A:CE08:7EFF:801D:A505:C603:E567:C85A: orinoco_plx: Local Interrupt already enabled Detected Orinoco/Prism2 PLX device at 00:0d.0 irq:9, io addr:0xf080 eth1: Station identity 001f:0009:0001:0004 eth1: Looks like an Intersil firmware version 1.04 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:90:D1:06:19:A7 eth1: Station name "Prism I" eth1: ready eth1: Channel out of range (0)! eth1: Channel out of range (0)! hermes @ 0xf080: Timeout waiting for card to reset (reg=0x8000)! eth1: orinoco_reset failed in orinoco_plx_open()<3>eth0: Bus master arbitration failure, status 88f3. I've been on hold all night with USR about the problem, but of course as soon as I said "linux", I was off their diagnostic chart and they refused to help until I had installed Windows (like that'll happen). I'm going to take the card to work and try it in one of our Windows 2000 laptops, but I was wondering if anyone has any suggestions as to what the problem might be... Thanks, Zack --- This sf.net email is sponsored by: Dice - The leading online job board for high-tech professionals. Search and apply for tech jobs today! http://seeker.dice.com/seeker.epl?rel_code=31 leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] WISP-DIST hostap_plx issues
Zachariah Mully wrote: Disclaimer: I don't own any wireless equipment, but it looked like an interesting problem. Several things that I noticed while googling. These may or may not help. You may experience different issues while using this card on wisp box, Red hat box, and work w2k box: > Hello all- > I am having a strange issue with my Prism 2.5 card (USR 2445)... > Unfortunately my WISP box is sufficiently fubar'ed that it really didn't > provide much good diagnostic information, so I threw it into my RH7.3 box > and got the following: > > hermes.c: 16 Jan 2002 David Gibson <[EMAIL PROTECTED]> 1.) date of the driver and version. There was this long thread at http://lists.samba.org/pipermail/wireless/2002-April/004045.html with David Gibson. There problems with version 11 of there driver dated 5 apr 2002. You have version .09b. > orinoco.c 0.09b (David Gibson <[EMAIL PROTECTED]> and others) > orinoco_plx.c 0.09b (Daniel Barlow <[EMAIL PROTECTED]>) > orinoco_plx: CIS: > 5201:CA03:5600:F800:85FF:C817:2A04:8A67:7C5A:CE08:7EFF:801D:A505:C603:E567:C85A: > orinoco_plx: Local Interrupt already enabled 2.) h see very bottom of message. ^ Perhaps a hardware conflict? > Detected Orinoco/Prism2 PLX device at 00:0d.0 irq:9, io addr:0xf080 > eth1: Station identity 001f:0009:0001:0004 > eth1: Looks like an Intersil firmware version 1.04 > eth1: Ad-hoc demo mode supported > eth1: IEEE standard IBSS ad-hoc mode supported > eth1: WEP supported, 104-bit key > eth1: MAC address 00:90:D1:06:19:A7 > eth1: Station name "Prism I" > eth1: ready > eth1: Channel out of range (0)! > eth1: Channel out of range (0)! Possible module paramenter? http://www.seattlewireless.net/index.cgi/DlinkCardComments?action=edit options orinoco_cs ignore_cis_vcc=1 On redhat people reported this to solve the problem, but still have errors in their logs. > hermes @ 0xf080: Timeout waiting for card to reset (reg=0x8000)! > eth1: orinoco_reset failed in orinoco_plx_open()<3>eth0: Bus master > arbitration failure, status 88f3. http://www.uwsg.iu.edu/hypermail/linux/net/9511.1/0031.html "Seems you have a hardware conflict with two PCI cards. You may need to "look into the BIOS settiongs for PCI hardware. http://www.geocrawler.com/archives/3/82/1997/4/0/262565/ The MS Windows 2000 eXPerience may not provide you with any other clues but more headaches. http://www.seattlewireless.net/index.cgi/DlinkCardComments?action=edit "I had issues with the drivers for Win2K on the CD but the ones on the website worked just fine. Did you try using a different laptop with Win2k?. Perhaps hardware conflicts are a good starting place on your Redhat box? Hope this helps, Greg Morgan --- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] WISP-DIST hostap_plx issues
Unfortunately debug from orinoco_plx is not of much help for me, as I never used it. Please give messages from hostap_plx if you can. Zachariah Mully wrote about "[leaf-user] WISP-DIST hostap_plx issues": > > Hello all- > I am having a strange issue with my Prism 2.5 card (USR 2445)... > Unfortunately my WISP box is sufficiently fubar'ed that it really didn't > provide much good diagnostic information, so I threw it into my RH7.3 box > and got the following: > > hermes.c: 16 Jan 2002 David Gibson <[EMAIL PROTECTED]> > orinoco.c 0.09b (David Gibson <[EMAIL PROTECTED]> and others) > orinoco_plx.c 0.09b (Daniel Barlow <[EMAIL PROTECTED]>) > orinoco_plx: CIS: > 5201:CA03:5600:F800:85FF:C817:2A04:8A67:7C5A:CE08:7EFF:801D:A505:C603:E567:C85A: > orinoco_plx: Local Interrupt already enabled > Detected Orinoco/Prism2 PLX device at 00:0d.0 irq:9, io addr:0xf080 > eth1: Station identity 001f:0009:0001:0004 > eth1: Looks like an Intersil firmware version 1.04 > eth1: Ad-hoc demo mode supported > eth1: IEEE standard IBSS ad-hoc mode supported > eth1: WEP supported, 104-bit key > eth1: MAC address 00:90:D1:06:19:A7 > eth1: Station name "Prism I" > eth1: ready > eth1: Channel out of range (0)! > eth1: Channel out of range (0)! > hermes @ 0xf080: Timeout waiting for card to reset (reg=0x8000)! > eth1: orinoco_reset failed in orinoco_plx_open()<3>eth0: Bus master > arbitration failure, status 88f3. > > I've been on hold all night with USR about the problem, but of course as > soon as I said "linux", I was off their diagnostic chart and they refused > to help until I had installed Windows (like that'll happen). I'm going to > take the card to work and try it in one of our Windows 2000 laptops, but I > was wondering if anyone has any suggestions as to what the problem might > be... > > Thanks, > Zack > > > > > --- > This sf.net email is sponsored by: Dice - The leading online job board > for high-tech professionals. Search and apply for tech jobs today! > http://seeker.dice.com/seeker.epl?rel_code=31 > > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html -- Best Regards, Vladimir Systems Engineer (RHCE) --- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html