date:20131118

Re: Gear Motor and speed switch on ebay

2013-11-18 Thread Arkady Paka

Shipping to my friend.
*PA 18966 USA.*


2013/11/18 Okla Mike (Liltwisted) 

>  Not looking to make any money on these.  Just wanted to make them
> available especially for Bill. So on this one it would be $159.50 plus
> shipping.  I'll know more about shipping when they get here.
> On 11/18/2013 4:21 AM, Arkady Paka wrote:
>
> Hi Mike.
> If Bill don't want to buy your item
> http://www.ebay.com/itm/DAYTON-4Z381-D-C-GEARMOTOR-w-
> SPEED-CONTROL-/231091766747?pt=LH_DefaultDomain_0&hash=item35ce2485db
> *I want to buy it*.
>
>
> *How much i should pay with shipping to PA 18966? Arkady.*
>
>
> воскресенье, 10 ноября 2013 г., 19:03:34 UTC+2 пользователь LILtwisted
> написал:
>>
>>  Here is a couple of nice combo controllers and gear motors on eBay.
>> 94 rpm  90volt
>> http://www.ebay.com/itm/DAYTON-4Z381-D-C-GEARMOTOR-w-
>> SPEED-CONTROL-/231091766747?pt=LH_DefaultDomain_0&hash=item35ce2485db
>>
>> 170 rpm 90 volt
>> http://www.ebay.com/itm/DAYTON-4Z128-D-C-GEARMOTOR-w-
>> SPEED-CONTROL-/231091764618?pt=LH_DefaultDomain_0&hash=item35ce247d8a
>>
>> Here is a comparison for the prices.
>> http://www.grainger.com/product/4Z527?cm_sp=HIO-_-
>> HIDP-_-RR_VTV70300505&cm_vc=IDPRRZ13
>> http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z381
>> http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z128
>>
>> Mike
>> OK
>>
>
>  --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills
> .
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>  --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills
> .
> For more options, visit https://groups.google.com/groups/opt_out.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: Gear Motor and speed switch on ebay

2013-11-18 Thread Okla Mike (Liltwisted)

Not looking to make any money on these. Just wanted to make them
available especially for Bill. So on this one it would be $159.50 plus
shipping. I'll know more about shipping when they get here.

On 11/18/2013 4:21 AM, Arkady Paka wrote:

Hi Mike.
If Bill don't want to buy your item
http://www.ebay.com/itm/DAYTON-4Z381-D-C-GEARMOTOR-w-SPEED-CONTROL-/231091766747?pt=LH_DefaultDomain_0&hash=item35ce2485db

*I want to buy it*.
*How much i should pay with shipping to PA 18966?

Arkady.*

воскресенье, 10 ноября 2013 г., 19:03:34 UTC+2 пользователь LILtwisted
написал:

Here is a couple of nice combo controllers and gear motors on eBay.
94 rpm 90volt

http://www.ebay.com/itm/DAYTON-4Z381-D-C-GEARMOTOR-w-SPEED-CONTROL-/231091766747?pt=LH_DefaultDomain_0&hash=item35ce2485db

170 rpm 90 volt

http://www.ebay.com/itm/DAYTON-4Z128-D-C-GEARMOTOR-w-SPEED-CONTROL-/231091764618?pt=LH_DefaultDomain_0&hash=item35ce247d8a

Here is a comparison for the prices.

http://www.grainger.com/product/4Z527?cm_sp=HIO-_-HIDP-_-RR_VTV70300505&cm_vc=IDPRRZ13

http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z381

http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z128

Mike
OK

--
You received this message because you are subscribed to the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at
http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/groups/opt_out.

--
You received this message because you are subscribed to the Google Groups "Legacy
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: 1200

2013-11-18 Thread Roger P


Hi guys
I know the full history on this machine, it has had three careful owners and 
the last one has not used it, it comes complete with cutters etc. I may even 
invest in it myself with a view to reselling it!

Euro Roger

-Original Message- 
From: Bill Bulkeley

Sent: Monday, November 18, 2013 7:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: 1200


1.00 GBP  = 1.61092 USD
1,100.00 GBP  = 1,771.78 USD

That is from the online currency converter


Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
jwb...@windstream.net
Sent: Tuesday, 19 November 2013 6:27 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Michael Kratky
Subject: RE: 1200

I thought 1 euro was = to about $1.35 us


 Michael Kratky  wrote:

Think is closer to $1800 US, the listing price had the £ pound symbol
in front of it





-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
jwb...@windstream.net
Sent: Monday, November 18, 2013 8:32 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Bill Bulkeley
Subject: Re: 1200

1,100 Euro, isn't that about 1500 us, I would think that would barely
cover shipping




 Bill Bulkeley  wrote:
> http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/2613
> 30
> 937224
> ?pt=UK_Home_Garden_PowerTools_SM
>  33
> 093722 4?pt=UK_Home_Garden_PowerTools_SM&hash=item3cd889a588>
> &hash=item3cd889a588
>
>
>
> here's a 1200 in the UK it has the design kit with it as well as the
> rotary table and a heap of bits also one of those older indexing
> plates if anyone from over there is looking for a mill
>
> I have not ever seen a large mill for sale over there before I would
> assume its a rear find
>
> Bill
>
> --
> You received this message because you are subscribed to the Google
> Groups
"Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
> Visit this group at
http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.

--
You received this message because you are subscribed to the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at

http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/groups/opt_out.

--
You received this message because you are subscribed to the Google Groups

"Legacy Ornamental Mills" group.

To unsubscribe from this group and stop receiving emails from it, send an

email to legacy-ornamental-mills+unsubscr...@googlegroups.com.

To post to this group, send email to

legacy-ornamental-mills@googlegroups.com.

Visit this group at

http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/groups/opt_out.


--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.


-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6834 - Release Date: 11/13/13


-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6844 - Release Date: 11/17/13

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.

Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out. 


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more o

RE: 1200

2013-11-18 Thread Bill Bulkeley


1.00 GBP  = 1.61092 USD  
1,100.00 GBP  = 1,771.78 USD

That is from the online currency converter


Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
jwb...@windstream.net
Sent: Tuesday, 19 November 2013 6:27 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Michael Kratky
Subject: RE: 1200

I thought 1 euro was = to about $1.35 us


 Michael Kratky  wrote: 
> Think is closer to $1800 US, the listing price had the £ pound symbol 
> in front of it
> 
> 
> 
>  
> 
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
> jwb...@windstream.net
> Sent: Monday, November 18, 2013 8:32 AM
> To: legacy-ornamental-mills@googlegroups.com
> Cc: Bill Bulkeley
> Subject: Re: 1200
> 
> 1,100 Euro, isn't that about 1500 us, I would think that would barely 
> cover shipping
> 
> 
> 
> 
>  Bill Bulkeley  wrote: 
> > http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/2613
> > 30
> > 937224
> > ?pt=UK_Home_Garden_PowerTools_SM
> >  > 33
> > 093722 4?pt=UK_Home_Garden_PowerTools_SM&hash=item3cd889a588>
> > &hash=item3cd889a588
> > 
> >  
> > 
> > here's a 1200 in the UK it has the design kit with it as well as the 
> > rotary table and a heap of bits also one of those older indexing 
> > plates if anyone from over there is looking for a mill
> > 
> > I have not ever seen a large mill for sale over there before I would 
> > assume its a rear find
> > 
> > Bill
> > 
> > --
> > You received this message because you are subscribed to the Google 
> > Groups
> "Legacy Ornamental Mills" group.
> > To unsubscribe from this group and stop receiving emails from it, 
> > send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> > To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> > Visit this group at
> http://groups.google.com/group/legacy-ornamental-mills.
> > For more options, visit https://groups.google.com/groups/opt_out.
> 
> --
> You received this message because you are subscribed to the Google 
> Groups "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.
> 
> --
> You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
> Visit this group at
http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.


-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6834 - Release Date: 11/13/13


-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6844 - Release Date: 11/17/13

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: 1200

2013-11-18 Thread jwb764

I thought 1 euro was = to about $1.35 us


 Michael Kratky  wrote: 
> Think is closer to $1800 US, the listing price had the £ pound symbol in
> front of it 
> 
> 
> 
>  
> 
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
> jwb...@windstream.net
> Sent: Monday, November 18, 2013 8:32 AM
> To: legacy-ornamental-mills@googlegroups.com
> Cc: Bill Bulkeley
> Subject: Re: 1200
> 
> 1,100 Euro, isn't that about 1500 us, I would think that would barely cover
> shipping
> 
> 
> 
> 
>  Bill Bulkeley  wrote: 
> > http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/261330
> > 937224
> > ?pt=UK_Home_Garden_PowerTools_SM
> >  > 093722 4?pt=UK_Home_Garden_PowerTools_SM&hash=item3cd889a588> 
> > &hash=item3cd889a588
> > 
> >  
> > 
> > here's a 1200 in the UK it has the design kit with it as well as the 
> > rotary table and a heap of bits also one of those older indexing 
> > plates if anyone from over there is looking for a mill
> > 
> > I have not ever seen a large mill for sale over there before I would 
> > assume its a rear find
> > 
> > Bill
> > 
> > --
> > You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> > To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> > To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> > Visit this group at
> http://groups.google.com/group/legacy-ornamental-mills.
> > For more options, visit https://groups.google.com/groups/opt_out.
> 
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Fw: 1200 - Add this to shopping list

2013-11-18 Thread mwfoscue

This is for all our fellow Continental LOM owners. Recently we have come to realize that many Mill owners are also Shopsmith owners.  With that in mind, I forward this eBay link:http://www.ebay.com/itm/Shopsmith-JOINTMATIC-Router-Table-Joiner-RARE-Used-Once-Only-Dovetail-Mitre-/321242658473?ssPageName=ADME:B:SS:US:3160This device/machine is fairly unique - and Shopsmith had a limited production of them - meaning they don't make it any more.  This unit seems to be exceptional - in very good (excellent?) conditiona and it has the miter grip and featherboards.  Just thought you like to see it if you live in Europe - way too expensive to ship to the Colonies.  ;-)Mac-Forwarded Message-
From: Bill Bulkeley 
Sent: Nov 18, 2013 8:00 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: 1200

http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/261330937224?pt=UK_Home_Garden_PowerTools_SM&hash=item3cd889a588 here’s a 1200 in the UK it has the design kit with it as well as the rotary table and a heap of bits also one of those older indexing plates if anyone from over there is looking for a millI have not ever seen a large mill for sale over there before I would assume its a rear findBill

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: 1200

2013-11-18 Thread Michael Kratky

Think is closer to $1800 US, the listing price had the £ pound symbol in
front of it 



 

-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
jwb...@windstream.net
Sent: Monday, November 18, 2013 8:32 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Bill Bulkeley
Subject: Re: 1200

1,100 Euro, isn't that about 1500 us, I would think that would barely cover
shipping




 Bill Bulkeley  wrote: 
> http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/261330
> 937224
> ?pt=UK_Home_Garden_PowerTools_SM
>  093722 4?pt=UK_Home_Garden_PowerTools_SM&hash=item3cd889a588> 
> &hash=item3cd889a588
> 
>  
> 
> here's a 1200 in the UK it has the design kit with it as well as the 
> rotary table and a heap of bits also one of those older indexing 
> plates if anyone from over there is looking for a mill
> 
> I have not ever seen a large mill for sale over there before I would 
> assume its a rear find
> 
> Bill
> 
> --
> You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
> Visit this group at
http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: 1200

2013-11-18 Thread jwb764

1,100 Euro, isn't that about 1500 us, I would think that would barely cover 
shipping




 Bill Bulkeley  wrote: 
> http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/261330937224
> ?pt=UK_Home_Garden_PowerTools_SM
>  4?pt=UK_Home_Garden_PowerTools_SM&hash=item3cd889a588> &hash=item3cd889a588
> 
>  
> 
> here's a 1200 in the UK it has the design kit with it as well as the rotary
> table and a heap of bits also one of those older indexing plates if anyone
> from over there is looking for a mill
> 
> I have not ever seen a large mill for sale over there before I would assume
> its a rear find
> 
> Bill
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

1200

2013-11-18 Thread Bill Bulkeley

http://www.ebay.co.uk/itm/Legacy-Router-Lathe-Mill-Series-1200-/261330937224
?pt=UK_Home_Garden_PowerTools_SM
 &hash=item3cd889a588

 

here's a 1200 in the UK it has the design kit with it as well as the rotary
table and a heap of bits also one of those older indexing plates if anyone
from over there is looking for a mill

I have not ever seen a large mill for sale over there before I would assume
its a rear find

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

2013-11-18 Thread Michael Kratky

With that in mind I've been looking unsuccessfully for some time now for a
deal on Magnate router bits to finally get my 1200 into production. 

 

Mike Kratky

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Begat
Sent: Monday, November 18, 2013 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: What's Wrong Here? Design Kit Sells for $125 , Mills for less than
$1000

 

Hello All, 

A design kit from Legacy recently sold for $125.  Loaded mills are going for
only $800 to $1200.  

http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?View
Item=

&ssPageName=ADME%3AB%3ASS%3AUS%3A3160&item=181264037101&nma=true&si=ODacsOZR
79Xmlqrx94nzS8N8rac%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

I guess people with mills want accessories, but people without mills have to
be lured with a great deal.

Begat



-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

2013-11-18 Thread Bill Bulkeley

I missed that one how much did they cost when they were available?

I wonder if it was any one here who bought it.

I always hoped they would have made a template in the the design kit for the
large combination bits

But they never did

Bill

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Begat
Sent: Monday, 18 November 2013 10:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: What's Wrong Here? Design Kit Sells for $125 , Mills for less than
$1000

 

Hello All, 

A design kit from Legacy recently sold for $125.  Loaded mills are going for
only $800 to $1200.  

http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?View
Item=

&ssPageName=ADME%3AB%3ASS%3AUS%3A3160&item=181264037101&nma=true&si=ODacsOZR
79Xmlqrx94nzS8N8rac%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

I guess people with mills want accessories, but people without mills have to
be lured with a great deal.

Begat



-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6834 - Release Date: 11/13/13

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

2013-11-18 Thread Begat

Hello All, 

A design kit from Legacy recently sold for $125.  Loaded mills are going 
for only $800 to $1200.  

http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?ViewItem=&ssPageName=ADME%3AB%3ASS%3AUS%3A3160&item=181264037101&nma=true&si=ODacsOZR79Xmlqrx94nzS8N8rac%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

I guess people with mills want accessories, but people without mills have 
to be lured with a great deal.

Begat


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: Gear Motor and speed switch on ebay

2013-11-18 Thread Arkady Paka

Hi Mike.
If Bill don't want to buy your item
http://www.ebay.com/itm/DAYTON-4Z381-D-C-GEARMOTOR-w-SPEED-CONTROL-/231091766747?pt=LH_DefaultDomain_0&hash=item35ce2485db
*I want to buy it*.


*How much i should pay with shipping to PA 18966?Arkady.*


воскресенье, 10 ноября 2013 г., 19:03:34 UTC+2 пользователь LILtwisted 
написал:
>
>  Here is a couple of nice combo controllers and gear motors on eBay.
> 94 rpm  90volt
>
> http://www.ebay.com/itm/DAYTON-4Z381-D-C-GEARMOTOR-w-SPEED-CONTROL-/231091766747?pt=LH_DefaultDomain_0&hash=item35ce2485db
>  
> 170 rpm 90 volt
>
> http://www.ebay.com/itm/DAYTON-4Z128-D-C-GEARMOTOR-w-SPEED-CONTROL-/231091764618?pt=LH_DefaultDomain_0&hash=item35ce247d8a
>
> Here is a comparison for the prices.
>
> http://www.grainger.com/product/4Z527?cm_sp=HIO-_-HIDP-_-RR_VTV70300505&cm_vc=IDPRRZ13
> http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z381
> http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z128
>
> Mike
> OK
>
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re: Gear Motor and speed switch on ebay

Re: Gear Motor and speed switch on ebay

Re: 1200

RE: 1200

RE: 1200

Fw: 1200 - Add this to shopping list

RE: 1200

Re: 1200

1200

What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

RE: What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

Re: Gear Motor and speed switch on ebay

13 matches

Site Navigation

Mail list logo

Footer information