Re: double sided tape
I buy my double sided tape from Craft Supply. The web site is www.woodturnerscatalog.com Stan Shuford s...@shuford.com On Mon, Jun 6, 2016 at 5:48 AM, Bill Bulkeley wrote: > I’m reposting this with a new heading so any one in the future searching > our archives looking for info on double sided tape will hopefully be able > to find it easier . i hope it comes up as a new topic > > Bill > > > > https://www.youtube.com/watch?v=3uTsQ3dYRrk > > > > > > > > I have not used the method described on the link below but plan to in the > near future. I need to buy the supper glue and accelerant. > > It is not double sided tape but hopefully a better method. > > > > Harvey > > > > > > > > https://www.youtube.com/watch?v=3uTsQ3dYRrk > > > > > > > > > > On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns wrote: > > I just got a manual Legacy 1000xl mill and just started using it, my first > project being a flag display box. I am learning by my mistakes. My > question is what is a good source for the double sided tape used to hold > the project in place while milling it? Does it have to be the foam kind? I > got a partial roll of the foam stuff with the machine, but there is no > brand stamp on it so don't know what kind it is or from where to order it. > I've been looking online and there seems to be different kinds, going from > about $7 a roll up to $20. A suggestion for an online source would be > appreciated. > > > > Phil > > > > > -- > > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2015.0.6201 / Virus Database: 4591/12366 - Release Date: 06/05/16 > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: double sided tape
MLCS.com has double face tape at 1" x 108ft for $15.95 a roll -From: "Stan Shuford" To: "Group Legacy Mill" Cc: Sent: Tue, 7 Jun 2016 08:54:54 -0400 Subject: Re: double sided tape I buy my double sided tape from Craft Supply. The web site is www.woodturnerscatalog.com [1] Stan Shuford s...@shuford.com [2] On Mon, Jun 6, 2016 at 5:48 AM, Bill Bulkeley wrote: I’m reposting this with a new heading so any one in the future searching our archives looking for info on double sided tape will hopefully be able to find it easier . i hope it comes up as a new topic Bill [4]https://www.youtube.com/watch?v=3uTsQ3dYRrk [5] I have not used the method described on the link below but plan to in the near future. I need to buy the supper glue and accelerant. It is not double sided tape but hopefully a better method. Harvey [6]https://www.youtube.com/watch?v=3uTsQ3dYRrk [7] On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns wrote: I just got a manual Legacy 1000xl mill and just started using it, my first project being a flag display box. I am learning by my mistakes. My question is what is a good source for the double sided tape used to hold the project in place while milling it? Does it have to be the foam kind? I got a partial roll of the foam stuff with the machine, but there is no brand stamp on it so don't know what kind it is or from where to order it. I've been looking online and there seems to be different kinds, going from about $7 a roll up to $20. A suggestion for an online source would be appreciated. Phil -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com [9]. To post to this group, send email to legacy-ornamental-mills@googlegroups.com [10]. Visit this group at [11]https://groups.google.com/group/legacy-ornamental-mills [12]. For more options, visit [13]https://groups.google.com/d/optout [14]. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com [15]. To post to this group, send email to legacy-ornamental-mills@googlegroups.com [16]. Visit this group at [17]https://groups.google.com/group/legacy-ornamental-mills [18]. For more options, visit [19]https://groups.google.com/d/optout [20]. No virus found in this message. Checked by AVG - www.avg.com [21] Version: 2015.0.6201 / Virus Database: 4591/12366 - Release Date: 06/05/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com [22]. To post to this group, send email to legacy-ornamental-mills@googlegroups.com [23]. Visit this group at [24]https://groups.google.com/group/legacy-ornamental-mills [25]. For more options, visit [26]https://groups.google.com/d/optout [27]. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com [28]. To post to this group, send email to legacy-ornamental-mills@googlegroups.com [29]. Visit this group at [30]https://groups.google.com/group/legacy-ornamental-mills [31]. For more options, visit [32]https://groups.google.com/d/optout [33]. Links: -- [1] https://www.woodturnerscatalog.com/ [2] mailto:s...@shuford.com [3] mailto:bulke...@mmnet.com.au [4] https://www.youtube.com/watch?v=3uTsQ3dYRrk [5] https://www.youtube.com/watch?v=3uTsQ3dYRrk [6] https://www.youtube.com/watch?v=3uTsQ3dYRrk [7] https://www.youtube.com/watch?v=3uTsQ3dYRrk [8] mailto:fillbu...@gmail.com [9] mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com [10] mailto:legacy-ornamental-mills@googlegroups.com [11] https://groups.google.com/group/legacy-ornamental-mills [12] https://groups.google.com/group/legacy-ornamental-mills [13] https://groups.google.com/d/optout [14] https://groups.google.com/d/optout [15] mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com [16] mailto:legacy-ornamental-mills@googlegroups.com [17] https://groups.google.com/group/legacy-ornamental-mills [18] https://groups.google.com/group/legacy-ornamental-mills [19] https://groups.google.com/d/optout [20] https://groups.google.com/d/optout [21] http://www.avg.com [22] mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com [23] mailto:legacy-ornamental
Re: New Members and Moderation
Bill Let me know what happens. Maybe I have finally made a contribution to the group! Harvey On Sun, Jun 5, 2016 at 5:50 PM, Bill Bulkeley wrote: > I really like this idea, here in Australia where I live I can’t always get > good double sided tape but I can get good masking tape and super glue I’m > defiantly trying this one. > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Harvey Matyas > *Sent:* Monday, 6 June 2016 6:16 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: New Members and Moderation > > > > I have not used the method described on the link below but plan to in the > near future. I need to buy the supper glue and accelerant. > > It is not double sided tape but hopefully a better method. > > > > Harvey > > > > > > > > https://www.youtube.com/watch?v=3uTsQ3dYRrk > > > > > > > > > > On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns wrote: > > I just got a manual Legacy 1000xl mill and just started using it, my first > project being a flag display box. I am learning by my mistakes. My > question is what is a good source for the double sided tape used to hold > the project in place while milling it? Does it have to be the foam kind? I > got a partial roll of the foam stuff with the machine, but there is no > brand stamp on it so don't know what kind it is or from where to order it. > I've been looking online and there seems to be different kinds, going from > about $7 a roll up to $20. A suggestion for an online source would be > appreciated. > > > > Phil > > On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote: > > Hello New Members, > > > > This is a reminder that until you post a message, your messages must be > approved by either an owner or moderators of this group to be > posted. Google sends an automated message to the people that > are responsible for approving messages, but please be aware it can be a > very long delay. > > > > Getting off the moderated list is easy as posting a message introducing > yourself. Asking a question related to the equipment or posting a photo is > always good for getting instant approval. I still believe this is a family > friendly place so please don't be shy. > > > > As of today, there are 63 members that have joined since 2010 that have > never posted a message. I sure would like to hear from them either here in > this thread, or feel free to send me a note off the list so I can update > your status. > > > > -Tim > > > > -- > > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2015.0.6201 / Virus Database: 4591/12366 - Release Date: 06/05/16 > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: New Members and Moderation
You defiantly have, I believe another member is also going to try it out this week end Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Harvey Matyas Sent: Wednesday, 8 June 2016 9:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New Members and Moderation Bill Let me know what happens. Maybe I have finally made a contribution to the group! Harvey On Sun, Jun 5, 2016 at 5:50 PM, Bill Bulkeley wrote: I really like this idea, here in Australia where I live I can’t always get good double sided tape but I can get good masking tape and super glue I’m defiantly trying this one. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Harvey Matyas Sent: Monday, 6 June 2016 6:16 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New Members and Moderation I have not used the method described on the link below but plan to in the near future. I need to buy the supper glue and accelerant. It is not double sided tape but hopefully a better method. Harvey https://www.youtube.com/watch?v=3uTsQ3dYRrk On Sat, Jun 4, 2016 at 3:30 PM, Phil Burns wrote: I just got a manual Legacy 1000xl mill and just started using it, my first project being a flag display box. I am learning by my mistakes. My question is what is a good source for the double sided tape used to hold the project in place while milling it? Does it have to be the foam kind? I got a partial roll of the foam stuff with the machine, but there is no brand stamp on it so don't know what kind it is or from where to order it. I've been looking online and there seems to be different kinds, going from about $7 a roll up to $20. A suggestion for an online source would be appreciated. Phil On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote: Hello New Members, This is a reminder that until you post a message, your messages must be approved by either an owner or moderators of this group to be posted. Google sends an automated message to the people that are responsible for approving messages, but please be aware it can be a very long delay. Getting off the moderated list is easy as posting a message introducing yourself. Asking a question related to the equipment or posting a photo is always good for getting instant approval. I still believe this is a family friendly place so please don't be shy. As of today, there are 63 members that have joined since 2010 that have never posted a message. I sure would like to hear from them either here in this thread, or feel free to send me a note off the list so I can update your status. -Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6201 / Virus Database: 4591/12366 - Release Date: 06/05/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6201 / Virus Database: 4598/12381 - Release Date: 06/07/16 -- You received this message because you are subscrib