Re: 2 Morse Taper

[Tim Krause]

No one mentioned to NOT hammer it in like you would a lathe.  In fact I would  
recommend  that you take it out frequently.   You remove the knob from the end 
of the spindle and use the 1/4" Allen wrench to tap it out.  

If you don't follow this advice, you will find the drive gets stuck inside the 
socket and heavier means are necessary. 

If you really don't take this advice, the two metals will become one and they 
are seriously not for woodworkers to attempt getting them apart!

So some of this was said tongue in check, but the double locking collar is the 
definitive way to go.  Last I checked, legacy still had then in stock.  They 
are just two locking collars welded together. One has a smooth 1" bore that 
tightens on the drive an the other collar I threaded 1-8 that tightens on the 
spindle

If you choose to use a chuck or a face plate you will need a smooth bore split 
collar to make the accessories turn true.

Hope that helps


On Aug 3, 2019, 2:41 AM, at 2:41 AM, Richard Ellis  
wrote:
>I have just put together my shortened 900 However I am not to impressed
>
>with the head stock 2 morse. Will there be a chance of it slipping if
>the 
>tailstock dead center loosens and the pressure on the 2 morse eases .
>Do I 
>need to locktite it or pin it somehow ??
>Richard
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4e149861-e6f6-45a6-8e08-1609855b98ed%40comcast.net.

RE: 2 Morse Taper

[bulkeley]

Ps Richard as for the morse slipping I’m sure you can make your own double 
locking collar knowing you can work a metal lathe quite well

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Sunday, 4 August 2019 8:29 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: 2 Morse Taper

 

Go this way

Bill

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Richard Ellis
Sent: Sunday, 4 August 2019 1:24 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: 2 Morse Taper

 

Hi Bill

I know I only bought the 900 for the leadscrew and rails, but it is in a bit of 
a state. It has a single locking collar with the male morse with drive dog 
welded on and nothing else.Lots of other things that have been put together 
wrongly. even the stick-on label on the headstock is back to front !!! Not that 
I need it.

The stops on the leadscrew don't fit my Revo leadscrew just to loose. I will 
swap them with the Revo ones that has the 900 leadscrew --I just hope 
they fit 

On Saturday, August 3, 2019 at 1:20:00 PM UTC+1, aussiman wrote:

That’s what the double locking collar is for  

 screws on to the headstock and locks on to what ever is in the morse taper

 

Bill

 

From: legacy-orna...@googlegroups.com   
 > On Behalf Of Richard Ellis
Sent: Saturday, 3 August 2019 7:41 PM
To: Legacy Ornamental Mills  >
Subject: 2 Morse Taper

 

I have just put together my shortened 900 However I am not to impressed with 
the head stock 2 morse. Will there be a chance of it slipping if the tailstock 
dead center loosens and the pressure on the 2 morse eases . Do I need to 
locktite it or pin it somehow ??

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
 

 .

 


 

 

Virus-free.  

 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com
 

 .

 


 

 

Virus-free.  

 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54a4a%24eaa8bd20%24bffa3760%24%40mmnet.com.au
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d54a4b%24e55dccb0%24b0196610%24%40mmnet.com.au.

Re: 2 Morse Taper

[Richard Ellis]

Hi Ray
Pop over and see I do know about Metal working lathes !!
Richard

On Saturday, August 3, 2019 at 4:18:17 PM UTC+1, Brafield Bodger wrote:
>
> What make you think the 2MT will slip - they don't on a lathe which has 
> much high rotational forces placed on it then a 900.
>
> On Saturday, 3 August 2019 10:41:11 UTC+1, Richard Ellis wrote:
>>
>> I have just put together my shortened 900 However I am not to impressed 
>> with the head stock 2 morse. Will there be a chance of it slipping if the 
>> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
>> need to locktite it or pin it somehow ??
>> Richard
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/db725361-5572-48d1-89e2-d46f563de016%40googlegroups.com.

Re: 2 Morse Taper

[Richard Ellis]

Hi Bill
I know I only bought the 900 for the leadscrew and rails, but it is in a 
bit of a state. It has a single locking collar with the male morse with 
drive dog welded on and nothing else.Lots of other things that have 
been put together wrongly. even the stick-on label on the headstock is back 
to front !!! Not that I need it.
The stops on the leadscrew don't fit my Revo leadscrew just to loose. I 
will swap them with the Revo ones that has the 900 leadscrew --I 
just hope they fit 

On Saturday, August 3, 2019 at 1:20:00 PM UTC+1, aussiman wrote:
>
> That’s what the double locking collar is for[image: Double Locking Collar] 
> screws on to the headstock and locks on to what ever is in the morse taper
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *Richard 
> Ellis
> *Sent:* Saturday, 3 August 2019 7:41 PM
> *To:* Legacy Ornamental Mills  >
> *Subject:* 2 Morse Taper
>
>  
>
> I have just put together my shortened 900 However I am not to impressed 
> with the head stock 2 morse. Will there be a chance of it slipping if the 
> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
> need to locktite it or pin it somehow ??
>
> Richard
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
>  
> 
> .
>
>
> 
>  Virus-free. 
> www.avast.com 
> 
>  
> <#000b01d549f5$bedf2d50$3c9d87f0$@mmnet.com.au_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0e9ccd33-111f-48fd-a466-4d0e6f8a71c9%40googlegroups.com.

Re: 2 Morse Taper

[Brafield Bodger]

What make you think the 2MT will slip - they don't on a lathe which has 
much high rotational forces placed on it then a 900.

On Saturday, 3 August 2019 10:41:11 UTC+1, Richard Ellis wrote:
>
> I have just put together my shortened 900 However I am not to impressed 
> with the head stock 2 morse. Will there be a chance of it slipping if the 
> tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
> need to locktite it or pin it somehow ??
> Richard
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/04a2f0c0-3073-435c-b95c-4fdcaaeda3d2%40googlegroups.com.

RE: 2 Morse Taper

[bulkeley]

That’s what the double locking collar is for screws on to the headstock and 
locks on to what ever is in the morse taper

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Saturday, 3 August 2019 7:41 PM
To: Legacy Ornamental Mills 
Subject: 2 Morse Taper

 

I have just put together my shortened 900 However I am not to impressed with 
the head stock 2 morse. Will there be a chance of it slipping if the tailstock 
dead center loosens and the pressure on the 2 morse eases . Do I need to 
locktite it or pin it somehow ??

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d549f5%24bedf2d50%243c9d87f0%24%40mmnet.com.au.

2 Morse Taper

[Richard Ellis]

I have just put together my shortened 900 However I am not to impressed 
with the head stock 2 morse. Will there be a chance of it slipping if the 
tailstock dead center loosens and the pressure on the 2 morse eases . Do I 
need to locktite it or pin it somehow ??
Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/358d7bda-fa12-4371-a526-7b4fd6aeeb1e%40googlegroups.com.