RE: Old posts - w/Wayback Machine Link

[bulkeley]

Can we see it?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray
Sent: Wednesday, 14 August 2019 9:34 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Old posts - w/Wayback Machine Link

 

Bill’s link worked for me.

 

I have received a copy of the Template Instructions from Cindy – I’m chasing up 
the Lettering thing.

 

Ray

 

From: legacy-ornamental-mills@googlegroupscom 
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of MWF
Sent: Wednesday, 14 August 2019 4:37 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Old posts - w/Wayback Machine Link

 

Bill,

 

Thanks - however, the link you posted did not work for me.

I did some "poking around" on the WayBack site and found this link worked:

  


Legacy Mills pages/postings 
 

 

Enjoy!

Mac

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d55236%241e11eae0%245a35c0a0%24%40mmnet.com.au.

Re: Old posts - w/Wayback Machine Link

[Tim Ziegler]

Is that s down load or hard copy?

On Tue, Aug 13, 2019, 6:33 PM Ray  wrote:

> Bill’s link worked for me.
>
>
>
> I have received a copy of the Template Instructions from Cindy – I’m
> chasing up the Lettering thing.
>
>
>
> Ray
>
>
>
> *From:* legacy-ornamental-mills@googlegroupscom <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *MWF
> *Sent:* Wednesday, 14 August 2019 4:37 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Old posts - w/Wayback Machine Link
>
>
>
> Bill,
>
>
>
> Thanks - however, the link you posted did not work for me.
>
> I did some "poking around" on the WayBack site and found this link worked:
>
>
> 
>
> Legacy Mills pages/postings
> 
>
>
>
> Enjoy!
>
> Mac
>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF11gemW5YdZTfpa%2BPCT-jEGO%3Dk2v175mUtbcjRxjyMPQ%40mail.gmail.com.

RE: Old posts - w/Wayback Machine Link

[Ray]

Bill’s link worked for me.

 

I have received a copy of the Template Instructions from Cindy – I’m chasing up 
the Lettering thing.

 

Ray

 

From: legacy-ornamental-mills@googlegroupscom 
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of MWF
Sent: Wednesday, 14 August 2019 4:37 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Old posts - w/Wayback Machine Link

 

Bill,

 

Thanks - however, the link you posted did not work for me.

I did some "poking around" on the WayBack site and found this link worked:

  


Legacy Mills pages/postings 
 

 

Enjoy!

Mac

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEJusgTQ6vz1FhCFydwr76fgBAA%3D%3D%40sky.com.

RE: Old posts - w/Wayback Machine Link

[rtjurg...@sbcglobal.net]

Loved that lunk!! In the add it linked to the trade shows. The Milwaukee trade 
show of 2005 is where I say the 1200 LOM live the first time.I saw it again in 
2006, and then while in Utah on business I bought mine. I still have it in the 
original boxez!! One day soon . . . 

Sent from Yahoo Mail on Android 
 
  On Tue, Aug 13, 2019 at 5:46 PM, bulke...@mmnet.com.au 
wrote:   #yiv5054655998 #yiv5054655998 -- _filtered #yiv5054655998 {panose-1:2 
4 5 3 5 4 6 3 2 4;} _filtered #yiv5054655998 {font-family:Calibri;panose-1:2 15 
5 2 2 2 4 3 2 4;} _filtered #yiv5054655998 {font-family:UI;panose-1:2 11 5 2 4 
2 4 2 2 3;}#yiv5054655998 #yiv5054655998 p.yiv5054655998MsoNormal, 
#yiv5054655998 li.yiv5054655998MsoNormal, #yiv5054655998 
div.yiv5054655998MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv5054655998
 a:link, #yiv5054655998 span.yiv5054655998MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv5054655998 a:visited, #yiv5054655998 
span.yiv5054655998MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv5054655998 
p.yiv5054655998msonormal0, #yiv5054655998 li.yiv5054655998msonormal0, 
#yiv5054655998 div.yiv5054655998msonormal0 
{margin-right:0cm;margin-left:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv5054655998
 span.yiv5054655998EmailStyle19 
{font-family:sans-serif;color:windowtext;}#yiv5054655998 
span.yiv5054655998EmailStyle20 
{font-family:sans-serif;color:windowtext;}#yiv5054655998 
span.yiv5054655998EmailStyle21 
{font-family:sans-serif;color:windowtext;}#yiv5054655998 
span.yiv5054655998EmailStyle23 
{font-family:sans-serif;color:windowtext;}#yiv5054655998 
.yiv5054655998MsoChpDefault {font-size:10.0pt;} _filtered #yiv5054655998 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv5054655998 
div.yiv5054655998WordSection1 {}#yiv5054655998 
Pretty much the same link mac

  

Bill

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of MWF
Sent: Wednesday, 14 August 2019 4:37 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Old posts - w/Wayback Machine Link

  

Bill,

  

Thanks - however, the link you posted did not work for me.

I did some "poking around" on the WayBack site and found this link worked:




Legacy Mills pages/postings

  

Enjoy!

Mac


-Original Message- 
From: bulke...@mmnet.com.au 
Sent: Aug 13, 2019 11:56 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: Old posts 




Ha ha ha ha yea I’ve come across that sight too searching.  Here’s a ligit  
link to some old legacy stuff click on the year and then on the blue dots  some 
things work some don’t but its fun to see the old legacy site again.

http://web.archive.org/web/2005030100*/http://www.legacywoodworking.com/

 

 Bill

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray
Sent: Wednesday, 14 August 2019 1:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Old posts

 

You would be surprised how much is out there – a lot of which isn’t in this 
group.

 

There is a Legacy Ornamental Mill – which is used to crush rocks for example.  
Always coming up in my searches – surprised they are allowed to use the name.

 

https://www.piccolomini-inn.it/2004/Nov/07_23355.html

 

Ray

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, August 13, 2019 4:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Old posts

 

Good one Richard great reading all the old posts again brings back some 
memories. We all should surf the archives from time to time to see how much 
we’ve forgotten lolol  

Bill


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1659581893.5736.1565721445909%40wamui-berry.atl.sa.earthlink.net.


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d55228%24e415a190%24ac40e4b0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2091780269.3597074.1565738401140%40mail.yahoo.com.

RE: not legacy at all

[MWF]

Thanks.  I don't blame you.  Keep it - as a "reminder" of the "progress you have made" from the earlier days.-Original Message-
From: rkcorbettjr 
Sent: Aug 13, 2019 10:44 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

Chains was a misprint. I'll  send you a picture of the cain. It was a first try so I made it a little too short and the handle too thin. Because of the work that went into it I  am reluctant to throw it away.Sent from my Verizon, Samsung Galaxy smartphone Original message From: MWF  Date: 8/13/19  1:19 AM  (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com Subject: RE: not legacy at all Russ,Nice!  The last email I sent you - and the previous one you sent out must have passed each other on the "InterNet Highway" - since I asked/repeated requests I sent you on Monday.Now, if there are any Members within a reasonable distance of  Dayton, Maryland - I am hoping they will "chime in" and ya'll can take it from there.  I know there is a "lurker" further out to your west (still in MD - Harper's Ferry area I believe).  Maybe he will drop a note on this message - for you to respond to.If you don't mind, and have the time and ability, we would love to see some photos of some of the canes you made - as well as some of the chains.  They sound like they may have presented you with several "challenges".Have a Terrific Tuesday!Mac-Original Message-
From: rkcorbettjr 
Sent: Aug 13, 2019 1:06 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

I forgot to mention that I've  made a couple of chains, one of which was very successful as it was tapered and had brass tubing at the top and bottom. I rough cut thr handle on a band saw and shaped on on my router table. I was pleased with the result.Sent from my Verizon, Samsung Galaxy smartphone Original message From: MWF  Date: 8/12/19  12:06 PM  (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com Subject: RE: not legacy at all Hello RK / Mr Corbett,Where in Maryland do you live?What model Mill do you have?  Do you have any of the "accessories" that work with your Mill?  e.g. Rotary Table, Template Follower Kit, Linear Molding Kit, etc.I know there are (were) at least two members of this Group that live in Maryland.Perhaps one is within a reasonable distance for the two (or three) of you to meet up some place.As several members of this Group have stated, get yourself some inexpensive wood (like pine from a big box store), glue several up to where you have a fair size piece, and practice making some columns: taperd, roped, fluted, etc.Another thing to use it for is to make you own custom trim - like dentil molding and pilasters.I encourage you to start watching the various videos that demonstrate the many ways to enjoy the capabilities of your Mill.Best of luck.Mac  -Original Message-
From: rkcorbettjr 
Sent: Aug 11, 2019 8:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

I'm interested in finding out how to unsubscribe as I  have only used my legacy to make cains and quarter columns for a chest of drawers I'm  working on. Almost all of what I see on the emails is beyond me. Frankly, the legacy was a gift from my wife and up until a couple of years ago I  never touched a piece of wood, so I'm not able to exploit this tool to anywhere near its potential. Of course, if there was someone in Maryland from whom I  could take lessons, that would be appreciated.ThanksSent from my Verizon, Samsung Galaxy smartphone Original message From: bulke...@mmnet.com.au Date: 8/10/19  12:38 AM  (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com Subject: RE: not legacy at all Alaska I’d love to go there but in the summer when its just cold not freezing all the wilderness game ,fishing and those northern lights were was all the gold the Klondike was it?  If you can get internet you can check up on us but like here lots of the place probably doesn’t have anything not even power I could live with that ok Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Okla Mike (Liltwisted)Sent: Saturday, 10 August 2019 2:00 PMTo: Mike Pung Subject: Re: not legacy at all I see that, what will happen when I go to Alaska for a month?  Total chaos?  I have enjoyed the threads, keep up the great work.Mike OKOn 8/9/2019 5:44 PM, bulke...@mmnet.com.au wrote:Welcome back mike now its Curts turn when he gets back lots happening on the group while you guys were away Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Okla Mike (Liltwisted)Sent: Saturday, 10 August 2019 7:47 AMTo: Mike Pung Subject: Re: not legacy at all Made it home safe, Had a great time with Tim and his WoodChuck as well as the LOM.  His chain drive system really saved some space in a shop crowded with all the cool tools.  Thanks for the hospitality Tim.Mike OKOn 8/8/2019 3:18 PM, Tim Ziegler wrote:Mike is on his way home now he 

RE: Old posts

[bulkeley]

Ha ha ha ha yea I’ve come across that sight too searching.  Here’s a ligit  
link to some old legacy stuff click on the year and then on the blue dots  some 
things work some don’t but its fun to see the old legacy site again.

http://web.archive.org/web/2005030100*/http://www.legacywoodworking.com/ 
 

 

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray
Sent: Wednesday, 14 August 2019 1:47 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Old posts

 

You would be surprised how much is out there – a lot of which isn’t in this 
group.

 

There is a Legacy Ornamental Mill – which is used to crush rocks for example.  
Always coming up in my searches – surprised they are allowed to use the name.

 

https://www.piccolomini-inn.it/2004/Nov/07_23355.html

 

Ray

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au  
Sent: Tuesday, August 13, 2019 4:10 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: Old posts

 

Good one Richard great reading all the old posts again brings back some 
memories. We all should surf the archives from time to time to see how much 
we’ve forgotten lolol  

 

Bill

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEKPIhkeY2nZFpPgnVhEhzM8BAA%3D%3D%40sky.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002901d551ef%24b0cbaf70%2412630e50%24%40mmnet.com.au.

RE: Old posts

[Ray]

You would be surprised how much is out there – a lot of which isn’t in this 
group.

 

There is a Legacy Ornamental Mill – which is used to crush rocks for example.  
Always coming up in my searches – surprised they are allowed to use the name.

 

https://www.piccolomini-inn.it/2004/Nov/07_23355.html

 

Ray

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, August 13, 2019 4:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Old posts

 

Good one Richard great reading all the old posts again brings back some 
memories. We all should surf the archives from time to time to see how much 
we’ve forgotten lolol  

 

Bill

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEKPIhkeY2nZFpPgnVhEhzM8BAA%3D%3D%40sky.com.

RE: not legacy at all

[bulkeley]

Not a problem I kept all my early stuff some of it was pretty ordinary but 
still sentimental .kept that is till my house burnt down and lost it all good 
and bad stuff, now I have to make keep all new crappie stuff lolol

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of rkcorbettjr
Sent: Wednesday, 14 August 2019 12:45 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

 

Chains was a misprint. I'll  send you a picture of the cain. It was a first try 
so I made it a little too short and the handle too thin. Because of the work 
that went into it I  am reluctant to throw it away.

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: MWF mailto:mwfos...@earthlink.net> > 

Date: 8/13/19 1:19 AM (GMT-05:00) 

To: legacy-ornamental-mills@googlegroups.com 
  

Subject: RE: not legacy at all 

 

Russ,

 

Nice!  The last email I sent you - and the previous one you sent out must have 
passed each other on the "InterNet Highway" - since I asked/repeated requests I 
sent you on Monday.

Now, if there are any Members within a reasonable distance of  Dayton, Maryland 
- I am hoping they will "chime in" and ya'll can take it from there.  

I know there is a "lurker" further out to your west (still in MD - Harper's 
Ferry area I believe).  Maybe he will drop a note on this message - for you to 
respond to.

If you don't mind, and have the time and ability, we would love to see some 
photos of some of the canes you made - as well as some of the chains.  They 
sound like they may have presented you with several "challenges".

 

Have a Terrific Tuesday!

Mac

  _  

  _  

 

-Original Message- 
From: rkcorbettjr 
Sent: Aug 13, 2019 1:06 AM 
To: legacy-ornamental-mills@googlegroups.com 
  
Subject: RE: not legacy at all 

I forgot to mention that I've  made a couple of chains, one of which was very 
successful as it was tapered and had brass tubing at the top and bottom. I 
rough cut thr handle on a band saw and shaped on on my router table. I was 
pleased with the result.

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: MWF mailto:mwfos...@earthlink.net> > 

Date: 8/12/19 12:06 PM (GMT-05:00) 

To: legacy-ornamental-mills@googlegroups.com 
  

Subject: RE: not legacy at all 

 

Hello RK / Mr Corbett,

 

Where in Maryland do you live?

What model Mill do you have?  

Do you have any of the "accessories" that work with your Mill?  e.g. Rotary 
Table, Template Follower Kit, Linear Molding Kit, etc.

 

I know there are (were) at least two members of this Group that live in 
Maryland.

Perhaps one is within a reasonable distance for the two (or three) of you to 
meet up some place.

 

As several members of this Group have stated, get yourself some inexpensive 
wood (like pine from a big box store), glue several up to where you have a fair 
size piece, and practice making some columns: taperd, roped, fluted, etc.

Another thing to use it for is to make you own custom trim - like dentil 
molding and pilasters.

 

I encourage you to start watching the various videos that demonstrate the many 
ways to enjoy the capabilities of your Mill.

Best of luck.

Mac


  _  


  _  


  

 

-Original Message- 
From: rkcorbettjr 
Sent: Aug 11, 2019 8:42 AM 
To: legacy-ornamental-mills@googlegroups.com 
  
Subject: RE: not legacy at all 

I'm interested in finding out how to unsubscribe as I  have only used my legacy 
to make cains and quarter columns for a chest of drawers I'm  working on. 
Almost all of what I see on the emails is beyond me. Frankly, the legacy was a 
gift from my wife and up until a couple of years ago I  never touched a piece 
of wood, so I'm not able to exploit this tool to anywhere near its potential. 

Of course, if there was someone in Maryland from whom I  could take lessons, 
that would be appreciated.

Thanks

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: bulke...@mmnet.com.au   

Date: 8/10/19 12:38 AM (GMT-05:00) 

To: legacy-ornamental-mills@googlegroups.com 
  

Subject: RE: not legacy at all 

 

Alaska I’d love to go there but in the summer when its just cold not freezing 
all the wilderness game ,fishing and those northern lights were was all the 
gold the Klondike was it?  If you can get internet you can check up on us but 
like here lots of the place probably doesn’t have anything not even power I 
could live with that ok

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  

RE: Old posts

[Ray]

Thanks Richard – I’ll do that.

 

As far as I know I appear to have purchased everything that was available at 
the time. 

 

Knew it would come in useful one day.

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Tuesday, August 13, 2019 2:36 PM
To: Legacy Ornamental Mills 
Subject: Old posts

 

Ray

For some reason or another you don't seem to require any help from me. But I 
will try to help you if you type MACSWAG in the search. You will learn 
a lot about the Revo. He was the first owner of my machine. And he bought every 
conceivable extra Which I now have and also the graph paper for drawing spindle 
shapes. Vertical vice horizontal vice  rotary table and other bits and bobs

Richard 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4b5a90d4-498b-4d44-81be-36aa45e9a07a%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEA3KcS7T5TJLqYR9x96R%2BDYBAA%3D%3D%40sky.com.

RE: REVO (again)

[Ray]

I have at least 2 sets – and no I’ve never used them either 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, August 13, 2019 1:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO (again)

 

Profiling thingy if You mean the template follower ?  page 26 of your revo 
manual

 

I have a set of the letter and number templates but I have not used them I 
believe they bolt on to the template follower

If there is instructions and you get a copy I would like one myself

 

Bill

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEHI7VOjY1uVBlplxTlozm5UBAA%3D%3D%40sky.com.

RE: not legacy at all

[rkcorbettjr]

Chains was a misprint. I'll  send you a picture of the cain. It was a first try 
so I made it a little too short and the handle too thin. Because of the work 
that went into it I  am reluctant to throw it away.Sent from my Verizon, 
Samsung Galaxy smartphone
 Original message From: MWF  Date: 
8/13/19  1:19 AM  (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: not legacy at all Russ,Nice!  The last email I sent you - and the 
previous one you sent out must have passed each other on the "InterNet Highway" 
- since I asked/repeated requests I sent you on Monday.Now, if there are any 
Members within a reasonable distance of  Dayton, Maryland - I am hoping they 
will "chime in" and ya'll can take it from there.  I know there is a "lurker" 
further out to your west (still in MD - Harper's Ferry area I believe).  Maybe 
he will drop a note on this message - for you to respond to.If you don't mind, 
and have the time and ability, we would love to see some photos of some of the 
canes you made - as well as some of the chains.  They sound like they may have 
presented you with several "challenges".Have a Terrific 
Tuesday!Mac-Original Message-
From: rkcorbettjr 
Sent: Aug 13, 2019 1:06 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

I forgot to mention that I've  made a couple of chains, one of which was very 
successful as it was tapered and had brass tubing at the top and bottom. I 
rough cut thr handle on a band saw and shaped on on my router table. I was 
pleased with the result.Sent from my Verizon, Samsung Galaxy smartphone 
Original message From: MWF  Date: 8/12/19  
12:06 PM  (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com Subject: RE: 
not legacy at all Hello RK / Mr Corbett,Where in Maryland do you live?What 
model Mill do you have?  Do you have any of the "accessories" that work with 
your Mill?  e.g. Rotary Table, Template Follower Kit, Linear Molding Kit, etc.I 
know there are (were) at least two members of this Group that live in 
Maryland.Perhaps one is within a reasonable distance for the two (or three) of 
you to meet up some place.As several members of this Group have stated, get 
yourself some inexpensive wood (like pine from a big box store), glue several 
up to where you have a fair size piece, and practice making some columns: 
taperd, roped, fluted, etc.Another thing to use it for is to make you own 
custom trim - like dentil molding and pilasters.I encourage you to start 
watching the various videos that demonstrate the many ways to enjoy the 
capabilities of your Mill.Best of luck.Mac  -Original Message-
From: rkcorbettjr 
Sent: Aug 11, 2019 8:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

I'm interested in finding out how to unsubscribe as I  have only used my legacy 
to make cains and quarter columns for a chest of drawers I'm  working on. 
Almost all of what I see on the emails is beyond me. Frankly, the legacy was a 
gift from my wife and up until a couple of years ago I  never touched a piece 
of wood, so I'm not able to exploit this tool to anywhere near its potential. 
Of course, if there was someone in Maryland from whom I  could take lessons, 
that would be appreciated.ThanksSent from my Verizon, Samsung Galaxy 
smartphone Original message From: bulke...@mmnet.com.au Date: 
8/10/19  12:38 AM  (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: not legacy at all Alaska I’d love to go there but in the summer 
when its just cold not freezing all the wilderness game ,fishing and those 
northern lights were was all the gold the Klondike was it?  If you can get 
internet you can check up on us but like here lots of the place probably 
doesn’t have anything not even power I could live with that ok Bill From: 
legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Okla Mike 
(Liltwisted)Sent: Saturday, 10 August 2019 2:00 PMTo: Mike Pung 
Subject: Re: not legacy at all I see 
that, what will happen when I go to Alaska for a month?  Total chaos?  I have 
enjoyed the threads, keep up the great work.Mike OKOn 8/9/2019 5:44 PM, 
bulke...@mmnet.com.au wrote:Welcome back mike now its Curts turn when he gets 
back lots happening on the group while you guys were away Bill From: 
legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Okla Mike 
(Liltwisted)Sent: Saturday, 10 August 2019 7:47 AMTo: Mike Pung 
Subject: Re: not legacy at all Made 
it home safe, Had a great time with Tim and his WoodChuck as well as the LOM.  
His chain drive system really saved some space in a shop crowded with all the 
cool tools.  Thanks for the hospitality Tim.Mike OKOn 8/8/2019 3:18 PM, Tim 
Ziegler wrote:Mike is on his way home now he just left my driveway.   Kind 
Regards,  Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th 
Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Thu, Aug 8, 2019 
at 12:56 PM Richard 

Re: Old posts

[Tim Ziegler]

yup got it thanks Richard

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Aug 13, 2019 at 8:55 AM Richard Ellis 
wrote:

> Tim
>  *The search at the top of the group.* On my PC at the top of the screen
> is the word Google in colors .Just to the right is a space where it say's
> search for messages. I just type anyone's handle into that and* bobs your
> uncle*
> It probably depend on the PC type !!!???
> Richard
>
> On Tuesday, August 13, 2019 at 2:40:30 PM UTC+1, Tim Ziegler wrote:
>>
>> Hey Richard Tim here where is that search bar your referring too?
>> I did a google search and everything but that came up.
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Tue, Aug 13, 2019 at 8:35 AM Richard Ellis  wrote:
>>
>>> Ray
>>> For some reason or another you don't seem to require any help from me.
>>> But I will try to help you if you type MACSWAG in the search. You
>>> will learn a lot about the Revo. He was the first owner of my machine. And
>>> he bought every conceivable extra Which I now have and also the graph paper
>>> for drawing spindle shapes. Vertical vice horizontal vice  rotary table and
>>> other bits and bobs
>>> Richard
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/4b5a90d4-498b-4d44-81be-36aa45e9a07a%40googlegroups.com
>>> 
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/6d7bab33-5b81-4f31-b7f0-3869df32b22c%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGD-dfUFxiSd5PsHdAnaSu3OykHAcVRsiwxhR53EEvJtA%40mail.gmail.com.

Re: Old posts

[Richard Ellis]

Tim
 *The search at the top of the group.* On my PC at the top of the screen is 
the word Google in colors .Just to the right is a space where it say's 
search for messages. I just type anyone's handle into that and* bobs your 
uncle*
It probably depend on the PC type !!!???
Richard

On Tuesday, August 13, 2019 at 2:40:30 PM UTC+1, Tim Ziegler wrote:
>
> Hey Richard Tim here where is that search bar your referring too? 
> I did a google search and everything but that came up. 
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Tue, Aug 13, 2019 at 8:35 AM Richard Ellis  > wrote:
>
>> Ray
>> For some reason or another you don't seem to require any help from me. 
>> But I will try to help you if you type MACSWAG in the search. You 
>> will learn a lot about the Revo. He was the first owner of my machine. And 
>> he bought every conceivable extra Which I now have and also the graph paper 
>> for drawing spindle shapes. Vertical vice horizontal vice  rotary table and 
>> other bits and bobs
>> Richard 
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/4b5a90d4-498b-4d44-81be-36aa45e9a07a%40googlegroups.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/6d7bab33-5b81-4f31-b7f0-3869df32b22c%40googlegroups.com.

Re: Old posts

[Tim Ziegler]

Hey Richard Tim here where is that search bar your referring too?
I did a google search and everything but that came up.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Aug 13, 2019 at 8:35 AM Richard Ellis 
wrote:

> Ray
> For some reason or another you don't seem to require any help from me. But
> I will try to help you if you type MACSWAG in the search. You will
> learn a lot about the Revo. He was the first owner of my machine. And he
> bought every conceivable extra Which I now have and also the graph paper
> for drawing spindle shapes. Vertical vice horizontal vice  rotary table and
> other bits and bobs
> Richard
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4b5a90d4-498b-4d44-81be-36aa45e9a07a%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGR2SE25dB9FyDxfHpW4y%2BOHVzhzfuhSrzgB8GmBYE1XA%40mail.gmail.com.

Old posts

[Richard Ellis]

Ray
For some reason or another you don't seem to require any help from me. But 
I will try to help you if you type MACSWAG in the search. You will 
learn a lot about the Revo. He was the first owner of my machine. And he 
bought every conceivable extra Which I now have and also the graph paper 
for drawing spindle shapes. Vertical vice horizontal vice  rotary table and 
other bits and bobs
Richard 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4b5a90d4-498b-4d44-81be-36aa45e9a07a%40googlegroups.com.

Re: REVO (again)

[Tim Ziegler]

Yes that would be a good share for all. I'm still looking for the a
vertical vise and small parts followers.thin stock support etc...

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Aug 13, 2019 at 7:45 AM  wrote:

> Ps the vertical vice instructions may I have a copy of it
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 13 August 2019 10:40 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: REVO (again)
>
>
>
> Profiling thingy if You mean the template follower ?  page 26 of your revo
> manual
>
>
>
> I have a set of the letter and number templates but I have not used them I
> believe they bolt on to the template follower
>
> If there is instructions and you get a copy I would like one myself
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brafield Bodger
> *Sent:* Tuesday, 13 August 2019 9:33 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: REVO (again)
>
>
>
> I should add perhaps that she sent me the instructions for the Vertical
> Vice (or Vise as you Americans seem to prefer) together with a further copy
> of the REVO assembly instructions.
>
>
>
> Has anyone used the letter templates - are there instructions for those
> about do you know?
>
>
>
> Also, how is the  profiling thingy fitted?
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/9dfe35bd-7a95-4aed-8110-3e59a89fada3%40googlegroups.com
> 
> .
>
>
>
>
> 
>
> Virus-free. www.avast.com
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d551d4%242fbb5360%248f31fa20%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d551d4%24f84cff90%24e8e6feb0%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHaRRrhdg12zWiWNmtfJddKgMh%3DWBwkiJh0_pUWkKBbAQ%40mail.gmail.com.

RE: REVO (again)

[bulkeley]

Ps the vertical vice instructions may I have a copy of it

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, 13 August 2019 10:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO (again)

 

Profiling thingy if You mean the template follower ?  page 26 of your revo 
manual

 

I have a set of the letter and number templates but I have not used them I 
believe they bolt on to the template follower

If there is instructions and you get a copy I would like one myself

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Brafield Bodger
Sent: Tuesday, 13 August 2019 9:33 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: REVO (again)

 

I should add perhaps that she sent me the instructions for the Vertical Vice 
(or Vise as you Americans seem to prefer) together with a further copy of the 
REVO assembly instructions.

 

Has anyone used the letter templates - are there instructions for those about 
do you know?

 

Also, how is the  profiling thingy fitted?

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/9dfe35bd-7a95-4aed-8110-3e59a89fada3%40googlegroups.com
 

 .

 


 

 

Virus-free.  

 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d551d4%242fbb5360%248f31fa20%24%40mmnet.com.au
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d551d4%24f84cff90%24e8e6feb0%24%40mmnet.com.au.

RE: REVO (again)

[bulkeley]

Profiling thingy if You mean the template follower ?  page 26 of your revo 
manual

 

I have a set of the letter and number templates but I have not used them I 
believe they bolt on to the template follower

If there is instructions and you get a copy I would like one myself

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Brafield Bodger
Sent: Tuesday, 13 August 2019 9:33 PM
To: Legacy Ornamental Mills 
Subject: Re: REVO (again)

 

I should add perhaps that she sent me the instructions for the Vertical Vice 
(or Vise as you Americans seem to prefer) together with a further copy of the 
REVO assembly instructions.

 

Has anyone used the letter templates - are there instructions for those about 
do you know?

 

Also, how is the  profiling thingy fitted?

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/9dfe35bd-7a95-4aed-8110-3e59a89fada3%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d551d4%242fbb5360%248f31fa20%24%40mmnet.com.au.

RE: orbital sander paper cleaner

[bulkeley]

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Monday, 12 August 2019 11:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: orbital sander paper cleaner

 

  
https://woodworker.com/sander-sitter-5-mssu-105-824.asp

seems to be a 6inch one here

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Michael Kratky
Sent: Monday, 12 August 2019 11:25 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: orbital sander paper cleaner

 

Did find it at Peachtree Woodworking Supply for $24.99 but its only available 
for random orbital sanders up to 5” diameter, mine are 6”.

 

From: legacy-ornamental-mills@googlegroups.com 
  
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au  
Sent: Monday, August 12, 2019 9:02 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: orbital sander paper cleaner

 

What about here  
 
https://www.amazon.com/Sander-Sitter-Orbital-Landing-Pad/dp/B001ENXGKI

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Michael Kratky
Sent: Monday, 12 August 2019 10:03 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: orbital sander paper cleaner

 

Apparently the Sander Sitter is no longer available at least from all of the 
normal sources, Rockler, Lee Valley, Woodcraft

 

From: legacy-ornamental-mills@googlegroups.com 
  
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 
bulke...@mmnet.com.au  
Sent: Sunday, August 11, 2019 3:08 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: orbital sander paper cleaner

 

This is slightly legacy, I finished cutting my latest scroll saw project (see 
the pic) and was sanding the face ready for buffing using my orbital sander so 
I thought I would show you guys my sander sitter you sit the sander on it when 
you put it down, now as you do you let it run for a second and turn it off 
while holding it on there and it cleans the sand paper. I even hold it on there 
for a second off and on if I’m doing long stretches of sanding and I get way 
longer life from my sanding pads so the same would apply when you use your 
orbital sander sanding legacy jobs. Watch this  
 
https://www.youtube.com/watch?v=eZjreKL83GU  

 

Bill

 

 

 

 


 

 

Virus-free.  

 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d55013%2476b85410%246428fc30%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/022e01d55105%24d5fa3a90%2481eeafb0%24%40com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d5510e%24224e0c70%2466ea2550%24%40mmnet.com.au
 

RE: not legacy at all

[bulkeley]

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, 13 August 2019 4:38 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

 

We have all been there every one has to learn just start a project and ask us 
step by step as you go and before you know it you will get it. that’s how I did 
it and watching legacy videos I’m the only legacy owner on this group from 
Australia and there are only 2 legacy owners in my whole country

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of rkcorbettjr
Sent: Tuesday, 13 August 2019 3:55 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: RE: not legacy at all

 

I responded to some others of your group with information about my location and 
my my mill. I will stick around for a while, but up until 5 years ago or so I  
never picked up a woodworking tool. I've had some success but it's a slow 
process.  

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: Tim Krause mailto:artmarb...@comcast.net> > 

Date: 8/12/19 6:11 AM (GMT-05:00) 

To: Legacy-Ornamental-Mills mailto:legacy-ornamental-mills@googlegroups.com> > 

Subject: RE: not legacy at all 

 

Well if you must go, the directions are here:

You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .

To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d500d3e.1c69fb81.54b37.7c34%40mx.google.com

Otherwise I would stick around for a while and ask questions so we can offer 
some assistance.  There are several members that would like to see your work.  
There are several cane maker lurking in the background, maybe you could get 
them talking again?

I do have to say this last month we been a little lax in keeping the messages a 
little off topic. There is so much more to see if you go through the old 
messages. If you do choice to leave let me be the first to say we will miss 
you.  This group runs on questions and answers and even newbies are welcome 
here.

Sincerely, Tim

On Aug 12, 2019, at 3:01 AM, rkcorbettjr mailto:rkcorbet...@gmail.com> > wrote:

I'm interested in finding out how to unsubscribe as I  have only used my legacy 
to make cains and quarter columns for a chest of drawers I'm  working on. 
Almost all of what I see on the emails is beyond me. Frankly, the legacy was a 
gift from my wife and up until a couple of years ago I  never touched a piece 
of wood, so I'm not able to exploit this tool to anywhere near its potential. 

Of course, if there was someone in Maryland from whom I  could take lessons, 
that would be appreciated.

Thanks

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: bulke...@mmnet.com.au   

Date: 8/10/19 12:38 AM (GMT-05:00) 

To: legacy-ornamental-mills@googlegroups.com 
  

Subject: RE: not legacy at all 

 

Alaska I’d love to go there but in the summer when its just cold not freezing 
all the wilderness game ,fishing and those northern lights were was all the 
gold the Klondike was it?  If you can get internet you can check up on us but 
like here lots of the place probably doesn’t have anything not even power I 
could live with that ok

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Okla Mike 
(Liltwisted)
Sent: Saturday, 10 August 2019 2:00 PM
To: Mike Pung mailto:Legacy-Ornamental-Mills@googlegroups.com> >
Subject: Re: not legacy at all

 

I see that, what will happen when I go to Alaska for a month?  Total chaos?  I 
have enjoyed the threads, keep up the great work.

Mike OK

On 8/9/2019 5:44 PM, bulke...@mmnet.com.au   
wrote:

Welcome back mike now its Curts turn when he gets back lots happening on the 
group while you guys were away

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
   
 
 On Behalf Of Okla Mike (Liltwisted)
Sent: Saturday, 10 August 2019 7:47 AM
To: Mike Pung   

Subject: Re: not legacy at all

 

Made it home safe, Had a great time with Tim and his WoodChuck as well as the 
LOM.  His chain drive system really saved some space in a shop crowded with all 
the cool tools.  Thanks for the hospitality Tim.

Mike 

RE: not legacy at all

[bulkeley]

We have all been there every one has to learn just start a project and ask us 
step by step as you go and before you know it you will get it. that’s how I did 
it and watching legacy videos I’m the only legacy owner on this group from 
Australia and there are only 2 legacy owners in my whole country

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of rkcorbettjr
Sent: Tuesday, 13 August 2019 3:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: not legacy at all

 

I responded to some others of your group with information about my location and 
my my mill. I will stick around for a while, but up until 5 years ago or so I  
never picked up a woodworking tool. I've had some success but it's a slow 
process.  

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: Tim Krause mailto:artmarb...@comcast.net> > 

Date: 8/12/19 6:11 AM (GMT-05:00) 

To: Legacy-Ornamental-Mills mailto:legacy-ornamental-mills@googlegroups.com> > 

Subject: RE: not legacy at all 

 

Well if you must go, the directions are here:

You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .

To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d500d3e.1c69fb81.54b37.7c34%40mx.google.com

Otherwise I would stick around for a while and ask questions so we can offer 
some assistance.  There are several members that would like to see your work.  
There are several cane maker lurking in the background, maybe you could get 
them talking again?

I do have to say this last month we been a little lax in keeping the messages a 
little off topic. There is so much more to see if you go through the old 
messages. If you do choice to leave let me be the first to say we will miss 
you.  This group runs on questions and answers and even newbies are welcome 
here.

Sincerely, Tim

On Aug 12, 2019, at 3:01 AM, rkcorbettjr mailto:rkcorbet...@gmail.com> > wrote:

I'm interested in finding out how to unsubscribe as I  have only used my legacy 
to make cains and quarter columns for a chest of drawers I'm  working on. 
Almost all of what I see on the emails is beyond me. Frankly, the legacy was a 
gift from my wife and up until a couple of years ago I  never touched a piece 
of wood, so I'm not able to exploit this tool to anywhere near its potential. 

Of course, if there was someone in Maryland from whom I  could take lessons, 
that would be appreciated.

Thanks

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: bulke...@mmnet.com.au   

Date: 8/10/19 12:38 AM (GMT-05:00) 

To: legacy-ornamental-mills@googlegroups.com 
  

Subject: RE: not legacy at all 

 

Alaska I’d love to go there but in the summer when its just cold not freezing 
all the wilderness game ,fishing and those northern lights were was all the 
gold the Klondike was it?  If you can get internet you can check up on us but 
like here lots of the place probably doesn’t have anything not even power I 
could live with that ok

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Okla Mike 
(Liltwisted)
Sent: Saturday, 10 August 2019 2:00 PM
To: Mike Pung mailto:Legacy-Ornamental-Mills@googlegroups.com> >
Subject: Re: not legacy at all

 

I see that, what will happen when I go to Alaska for a month?  Total chaos?  I 
have enjoyed the threads, keep up the great work.

Mike OK

On 8/9/2019 5:44 PM, bulke...@mmnet.com.au   
wrote:

Welcome back mike now its Curts turn when he gets back lots happening on the 
group while you guys were away

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
   
 
 On Behalf Of Okla Mike (Liltwisted)
Sent: Saturday, 10 August 2019 7:47 AM
To: Mike Pung   

Subject: Re: not legacy at all

 

Made it home safe, Had a great time with Tim and his WoodChuck as well as the 
LOM.  His chain drive system really saved some space in a shop crowded with all 
the cool tools.  Thanks for the hospitality Tim.

Mike OK

On 8/8/2019 3:18 PM, Tim Ziegler wrote:

Mike is on his way home now he just left my driveway.   


Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Thu, Aug 8, 2019 at 12:56 PM Richard Ellis mailto:rchrd.ell...@gmail.com> > wrote:

How about this 

RE: three legacy's for sale and accessories and parts

[bulkeley]

Click here legacy-ornamental-mills+unsubscr...@googlegroups.com 
 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of rkcorbettjr
Sent: Sunday, 11 August 2019 10:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: three legacy's for sale and accessories and parts

 

I am a legacy owner and on your email list. Given that my legacy is not used 
that often, I would like to unsubscribe.  Can someone tell me how to do that?

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 Original message 

From: Tim Krause mailto:artmarb...@comcast.net> > 

Date: 8/8/19 1:33 AM (GMT-05:00) 

To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > 

Subject: Re: three legacy's for sale and accessories and parts 

 

We are getting off topic here and it's my fault, but there are some pictures in 
old messages that show what he got.  A small vile with a tiny amount of dust in 
it is pretty average for him.  He always says he can't quit his day job!

On Aug 7, 2019, at 9:33 PM, MWF mailto:mwfos...@earthlink.net> > wrote:

Thanks for the update.

Now, let's see if Curt "practices what he preaches" after the trip.

He is always asking for pictures.  Let's see if he posts pictures for us to 
see, of all the gold he panned.

For his sake (and Mike's), I hope they find the Mother Lode!

Mac


  _  


  _  


-Original Message- 
From: Tim Krause 
Sent: Aug 7, 2019 11:24 PM 
To: Legacy Ornamental Mills 
Subject: Re: three legacy's for sale and accessories and parts 

Well to let out more secrets, Curt and Mike are slaving away looking for gold 
in the UP.   Can't wait to hear about Mike finding it all again. 

On Aug 7, 2019, at 10:32 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

keep in mind the woodchuck guru is traveling (AKA MIKE PUNG) but is here in 
Minnesota so we can let him know to respond if that helps? 

I also have both the LOM and WC 


Kind Regards, 

 

Timothy J. Ziegler 

Ziegler WoodWork & Specialty 

14171 160th Ave. 

Foreston MN 56330 

 

320-294-5798 shop 

320-630-2243 cell 

 

 

On Wed, Aug 7, 2019 at 12:09 PM 'joe biunno' via Legacy Ornamental Mills < 
legacy-ornamental-mills@googlegroups.com> wrote: 

received additional photos from the buyer(now seller) of those three Legacy 
mills... these photos show the seller organizing and grouping the parts as best 
he knows(he knows almost nothing about the workings of a legacy mill, generally 
speaking)… there are 14 additional photos here, and I am going to try posting 
three photos per post... as I mentioned before, I am not scaling the photos 
down, so let's see how this might work as far as individual members downloading 
time... I will also ask members of this group to refer to the photo number when 
commenting, so we all can reference back to the photo... what is being asked 
here is an identification of what is there, for the purpose of what goes with 
the three legacy's that he is selling and what will then be sold separately as 
parts... there seems to be a decent amount of woodchuck parts, but ii would 
wait to hear from the woodchuck guys as to what they can identify 


  _  


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 . 
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/75b8f155-7263-4298-b3ba-18197ca05894%40googlegroups.com
 

 . 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 . 
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGygPE0pj87cbTBpV581dr%3DNitpd-zmeQLojs7Cej8yfA%40mail.gmail.com
 

 . 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit