Re: Dowel making on the Legacy

[Tim Ziegler]

I think the Legacy does a super job in dowels too, and I do a lot of them
on it.
Nice job on the gavels.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Sep 4, 2022 at 8:19 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone.
> We had a very short Labor Day Get-away this weekend.
> OUR weather turned south,(meaning it went form 89 deg. to 65 in one
> evening.)
> Being on the Lake with its almost 90 is nice. But 65 deg. it No fun all
> all. (its just to cold for my teste)
> So We came home a day early.
> This Project.
> I promised a friend of mine I would make some gavels for him, If he gave
> me the wood. (he gave me a 3"x4"x 3' maple, rough cut)
> All three were cut out form one piece of wood,  I needed 3- 2"x 5" dowels
> and 3 -1"x 12" dowels cut, to make these gavels.
> This job ended up starting with the band saw, then the Legacy, for the
> roughing part of this job, and then, I turned the wood on my lathe for the
> finals.
>
> The Lathe is an Awesome tool. But making a straight and round piece of
> wood on the Lathe is very hard to do. (for me.) But  lucky for me I own a
> Legacy Ornamental Mill. ;-p It made this job MUCH Easer!
>
> What I did was to cut this wood into one 2 1/2" round dowel, and 2- 1"
> dowel, which from, both could be taken down to the finial measurement
> rather quickly.
>
> If you notice on the Last photo, all three have different handles. I was
> not given any direction, On how to make these, except he wanted 3 gavels.
> (if he doesn't like the handles, I can always make another 3 latter. but I
> think he will be happy with these?)
>
> I have to clean up now, and put my stuff away.
>
> Talk to you all more latter.
>
> Have a good day, and a Very Nice Labor day (holiday) everyone.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/862919545.2281434.1662340729853%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF5ZrT%2BY69qM9dopwk-g1XaQU9Ys62UXjg3fFbi8grWDQ%40mail.gmail.com.

Re: Dowel making on the Legacy

['Curt George' via Legacy Ornamental Mills]

 Thank you both, Dan and Roger.
I find that the Legacy with a spindle drive motor, to be an incredible tool!
SPREAD THE WORD!  ;-)
C.A.G.
On Sunday, September 4, 2022 at 09:32:49 PM EDT, Ccm Ccm 
 wrote:  
 
 Nice work 

On Sunday, September 4, 2022, 'Curt George' via Legacy Ornamental Mills 
 wrote:

Hello Everyone.We had a very short Labor Day Get-away this weekend.  OUR 
weather turned south,(meaning it went form 89 deg. to 65 in one evening.) Being 
on the Lake with its almost 90 is nice. But 65 deg. it No fun all all. (its 
just to cold for my teste)  So We came home a day early.This Project.I promised 
a friend of mine I would make some gavels for him, If he gave me the wood. (he 
gave me a 3"x4"x 3' maple, rough cut)All three were cut out form one piece of 
wood,  I needed 3- 2"x 5" dowels and 3 -1"x 12" dowels cut, to make these 
gavels.This job ended up starting with the band saw, then the Legacy, for the 
roughing part of this job, and then, I turned the wood on my lathe for the 
finals.
The Lathe is an Awesome tool. But making a straight and round piece of wood on 
the Lathe is very hard to do. (for me.) But  lucky for me I own a Legacy 
Ornamental Mill. ;-p It made this job MUCH Easer!
What I did was to cut this wood into one 2 1/2" round dowel, and 2- 1" dowel, 
which from, both could be taken down to the finial measurement rather quickly. 
If you notice on the Last photo, all three have different handles. I was not 
given any direction, On how to make these, except he wanted 3 gavels.  (if he 
doesn't like the handles, I can always make another 3 latter. but I think he 
will be happy with these?)
I have to clean up now, and put my stuff away.
Talk to you all more latter.
Have a good day, and a Very Nice Labor day (holiday) everyone.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/ 
msgid/legacy-ornamental-mills/ 862919545.2281434. 
1662340729853%40mail.yahoo.com .



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DREou0oa54t_4Ke2SKSu%2B5uLQFW8OoARuDqu%2BCd4jo%2BhWg%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1715362836.2294748.1662344133493%40mail.yahoo.com.

Re: Dowel making on the Legacy

[Ccm Ccm]

Nice work

On Sunday, September 4, 2022, 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone.
> We had a very short Labor Day Get-away this weekend.
> OUR weather turned south,(meaning it went form 89 deg. to 65 in one
> evening.)
> Being on the Lake with its almost 90 is nice. But 65 deg. it No fun all
> all. (its just to cold for my teste)
> So We came home a day early.
> This Project.
> I promised a friend of mine I would make some gavels for him, If he gave
> me the wood. (he gave me a 3"x4"x 3' maple, rough cut)
> All three were cut out form one piece of wood,  I needed 3- 2"x 5" dowels
> and 3 -1"x 12" dowels cut, to make these gavels.
> This job ended up starting with the band saw, then the Legacy, for the
> roughing part of this job, and then, I turned the wood on my lathe for the
> finals.
>
> The Lathe is an Awesome tool. But making a straight and round piece of
> wood on the Lathe is very hard to do. (for me.) But  lucky for me I own a
> Legacy Ornamental Mill. ;-p It made this job MUCH Easer!
>
> What I did was to cut this wood into one 2 1/2" round dowel, and 2- 1"
> dowel, which from, both could be taken down to the finial measurement
> rather quickly.
>
> If you notice on the Last photo, all three have different handles. I was
> not given any direction, On how to make these, except he wanted 3 gavels.
> (if he doesn't like the handles, I can always make another 3 latter. but I
> think he will be happy with these?)
>
> I have to clean up now, and put my stuff away.
>
> Talk to you all more latter.
>
> Have a good day, and a Very Nice Labor day (holiday) everyone.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/legacy-ornamental-mills/862919545.2281434.
> 1662340729853%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DREou0oa54t_4Ke2SKSu%2B5uLQFW8OoARuDqu%2BCd4jo%2BhWg%40mail.gmail.com.

Re: Dowel making on the Legacy

[Dan Krager]

Nice work, Curt!  Receiver should be happy with those!
DanK


On Sunday, September 4, 2022 at 9:19:01 PM UTC-4 Curt George wrote:

> Hello Everyone.
> We had a very short Labor Day Get-away this weekend.  
> OUR weather turned south,(meaning it went form 89 deg. to 65 in one 
> evening.) 
> Being on the Lake with its almost 90 is nice. But 65 deg. it No fun all 
> all. (its just to cold for my teste)  
> So We came home a day early.
> This Project.
> I promised a friend of mine I would make some gavels for him, If he gave 
> me the wood. (he gave me a 3"x4"x 3' maple, rough cut)
> All three were cut out form one piece of wood,  I needed 3- 2"x 5" dowels 
> and 3 -1"x 12" dowels cut, to make these gavels.
> This job ended up starting with the band saw, then the Legacy, for the 
> roughing part of this job, and then, I turned the wood on my lathe for the 
> finals.
>
> The Lathe is an Awesome tool. But making a straight and round piece of 
> wood on the Lathe is very hard to do. (for me.) But  lucky for me I own a 
> Legacy Ornamental Mill. ;-p It made this job MUCH Easer!
>
> What I did was to cut this wood into one 2 1/2" round dowel, and 2- 1" 
> dowel, which from, both could be taken down to the finial measurement 
> rather quickly. 
>
> If you notice on the Last photo, all three have different handles. I was 
> not given any direction, On how to make these, except he wanted 3 gavels.  
> (if he doesn't like the handles, I can always make another 3 latter. but I 
> think he will be happy with these?)
>
> I have to clean up now, and put my stuff away.
>
> Talk to you all more latter.
>
> Have a good day, and a Very Nice Labor day (holiday) everyone.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/c8ff6144-ec03-43b7-b1b2-20fe452fa55cn%40googlegroups.com.

Re: fathers day

['Curt George' via Legacy Ornamental Mills]

 Happy Farther day Bill. (woops! that was a typo. but its funny so Im keeping 
it.) Father's day, Bill.
C.A.G.
On Sunday, September 4, 2022 at 07:59:30 PM EDT, Tim Ziegler 
 wrote:  
 
 lol
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Sat, Sep 3, 2022 at 11:51 PM  wrote:


I get up around 7 am but on father’s day when I hear one of my kids start 
moving around just after 10 am I jump

Back in bed and fake it lolololol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 4 September 2022 11:53 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: fathers day

 

Wow I'd have given up by 5:00 am. when I do get up each morning. lol




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Sep 3, 2022 at 8:46 PM  wrote:


I got my breakfast in bed 10;30 am but I got it lol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Sunday, 4 September 2022 11:25 AM
To: legacy-ornamental-mills@googlegroups.com; Bill Bulkeley 

Subject: RE: fathers day

 

Bill,

 

Happy Fathers Day to you.

Keep up the "PMA" (Positive Mental Attitude)!

 

Personally, I never wanted "breakfast in bed".  I MUCH prefer eating it at home 
at the table with family or going out to a restaurant that serves breakfast - 
like a "Chick-fil-A", "Bob Evans", "Panera Bread". "IHOP" (International House 
of Pancakes), etc.

 

Have a wonderful weekend!
Mac

-Original Message-
From: 
Sent: Sep 3, 2022 7:47 PM
To: 
Subject: RE: fathers day

 

Yea I know but there is always a first time for everything lol.

Where I watch the sun rise most mornings  and give

Thanks that I’m still breathing and life there for is good.

 

Bill

 

From: 'Denson Ingram' via Legacy Ornamental Mills 
 
Sent: Sunday, 4 September 2022 9:29 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: fathers day

 

Good luck with that Bill. 

Happy Fathers Day from Texas!

Denson

Sent from Denson's iPhone

 


On Sep 3, 2022, at 6:16 PM, bulke...@mmnet.com.au wrote:



 

Ok its Sunday morning here today and its fathers day I’m waiting to see if I 
get any breakfast in bed hopefully 

It will be before lunch, todays kids lol

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d8bfeb%241ef7b680%245ce72380%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/45F4941F-0345-4697-B21B-8C315C811148%40yahoo.com.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d8bfef%24918410f0%24b48c32d0%24%40mmnet.com.au.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/9a484b18-240a-4124-840f-ba0405de68c4%40earthlink.net.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d8c000%2428340360%24789c0a20%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFyTFfc6hVi3C0Mp%3DKSZ6TmFkDt4zsUOE5tr0v6%2BKeiew%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from 

Re: fathers day

[Tim Ziegler]

lol

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Sep 3, 2022 at 11:51 PM  wrote:

> I get up around 7 am but on father’s day when I hear one of my kids start
> moving around just after 10 am I jump
>
> Back in bed and fake it lolololol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 4 September 2022 11:53 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: fathers day
>
>
>
> Wow I'd have given up by 5:00 am. when I do get up each morning. lol
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Sep 3, 2022 at 8:46 PM  wrote:
>
> I got my breakfast in bed 10;30 am but I got it lol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Sunday, 4 September 2022 11:25 AM
> *To:* legacy-ornamental-mills@googlegroups.com; Bill Bulkeley <
> bulke...@mmnet.com.au>
> *Subject:* RE: fathers day
>
>
>
> Bill,
>
>
>
> Happy Fathers Day to you.
>
> Keep up the "PMA" (Positive Mental Attitude)!
>
>
>
> Personally, I never wanted "breakfast in bed".  I MUCH prefer eating it at
> home at the table with family or going out to a restaurant that serves
> breakfast - like a "Chick-fil-A", "Bob Evans", "Panera Bread". "IHOP"
> (International House of Pancakes), etc.
>
>
>
> Have a wonderful weekend!
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Sep 3, 2022 7:47 PM
> To: 
> Subject: RE: fathers day
>
>
>
> Yea I know but there is always a first time for everything lol.
>
> Where I watch the sun rise most mornings  and give
>
> Thanks that I’m still breathing and life there for is good.
>
>
>
> Bill
>
>
>
> *From:* 'Denson Ingram' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Sunday, 4 September 2022 9:29 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: fathers day
>
>
>
> Good luck with that Bill.
>
> Happy Fathers Day from Texas!
>
> Denson
>
> Sent from Denson's iPhone
>
>
>
> On Sep 3, 2022, at 6:16 PM, bulke...@mmnet.com.au wrote:
>
>
>
> Ok its Sunday morning here today and its fathers day I’m waiting to see if
> I get any breakfast in bed hopefully
>
> It will be before lunch, todays kids lol
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d8bfeb%241ef7b680%245ce72380%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/45F4941F-0345-4697-B21B-8C315C811148%40yahoo.com
> 
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d8bfef%24918410f0%24b48c32d0%24%40mmnet.com.au
> 
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/9a484b18-240a-4124-840f-ba0405de68c4%40earthlink.net
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" 

Father's day gift?

[Dan Krager]

Happy Father's Day, Bill.  Glad you got your breakfast.  Finally.

Here's something 
for
 
someone's wish list.  Not on my bucket list.

DanK

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/70708d60-5f35-4694-bd04-8b5450fafd7fn%40googlegroups.com.