Re: milling

2023-02-03 Thread 'Curt George' via Legacy Ornamental Mills 
 I got a reply to my comments. 
They were.  

| Couple of BunkysOk thanks!
;-)C.A.G. |


On Friday, February 3, 2023 at 09:28:18 PM EST, Tim Ziegler 
 wrote:  
 
 Thanks Tim for jumping in. I agree with you. I think Bill and I both commented 
on your youtube.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Fri, Feb 3, 2023 at 11:23 AM Tim Woodard  wrote:

Hey guys I'm sitting back here lurking and reading all the comment if you're 
really interested in helping us out leave these comments inside of our comments 
on the video This helps with engagement on the video and can get the video seen 
by more people
On Fri, Feb 3, 2023, 8:41 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

 Good morning everyone.
Tim I agree 100%, Hats off to anyone who wants to try and show others something 
that they can do. I cant wait to see the next video.
C.A.G.
On Friday, February 3, 2023 at 06:48:02 AM EST, Tim Ziegler 
 wrote:  
 
 For sure, it took me a long time to get those things in my head. Hats of to 
him for trying.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Fri, Feb 3, 2023 at 1:58 AM  wrote:


He is new and as he wants a better and better job im sure he will ask questions 
and we can help

I did leave a comment during and after asking for more info on what he is doing 
like what bits and what pitches

He is using and he needs to learn the difference between a rope bit and a 
barley bit 

But we all had to learn right

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, 3 February 2023 4:27 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling

 

Hey Bill.

 

My Mom use to tell me, "If you cant say something nice, Don't say anything at 
all". 

 

You are right about the camera angle. being a novel approach, One that I never 
though of trying.

 

There were quite of few suggestion that I would like to make While watching 
this video, In order to help this person get the most out of his Legacy. Simple 
little things, like plaining off the corners before you try to use the 
spiral/lead screw. Turning the headstock by hand/lever handle, and moving the 
Carriage by hand, to make the spindle round. Also, Making the spindle round 
first, so the spindle dose not have a flat spot, before you try to turn...  
(there are more, but I will stop there.) 

Over all I like the attempt, Perhaps his videos will bring in more people, to 
start using the Legacy? We can ONLY Hope. ;-)

 

Thanks for sharing this.

 

Have a good day.

C.A.G. 

 

On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au 
 wrote: 

 

 

https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys

 

just watched this comments ?

 

needs a bit of info like bits used and pitches I think great camera angle 

 

Bill

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGKBE7M5a237QaJjTwQE_cf3%2BUmxars-Z6eAc1W%3D6RJqQ%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/237581788.2029669.1675431680683

Re: Christmas in Feb

2023-02-03 Thread 'Curt George' via Legacy Ornamental Mills 
 I am very Happy for you Mike.Its not everyday something like that happens.  
Its nice to see that there are still some good people out there.I to would like 
to see some photos.Thanks for the posting. I am looking forward to hearing 
more. ;-)
C.A.G.On Friday, February 3, 2023 at 11:10:25 PM EST, 
 wrote:  
 
 
Bit hard to tell but anything that snaps in I would think would be dangerous in 
a router 

But when you post a pic we might know what you have there

  

Bill

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Mike Newman
Sent: Saturday, 4 February 2023 2:09 PM
To: Legacy Ornamental Mills 
Subject: Christmas in Feb

  

When I bought my LOM 1200 a month ago I was able to get a great price because 
the owner could not find a number of the original parts so I took a chance that 
I would be able to fabricate or find what I needed to do the type of work I 
wanted.  I was able to find/make stuff to get functional.  This week the person 
I bought it from sent me a text that in cleaning up a corner of his shop he 
found a box full of everything that he had gotten with the mill when he bought 
it and wanted to know if I still wanted it since he obviously no longer had any 
need.  After looking at some photos it was obvious that this was everything i 
was missing with some extras like Magnate bits, extra hardware/backer 
plates/drive gears/etc.  The box arrived yesterday and boy was I excited to see 
everything he found.  The one item that I am still trying to ID is not a LOM 
part but appears to be some type of quick change router bit kit that has a base 
unit that may attach to the router and then 8-10 1/4" and 1/2" fittings that 
allow a bit to be set screwed into the sleeve and then the sleeve may then snap 
into the base similar to a quick disconnect air hose fitting.  Still playing 
with it to figure out how it works and how it may attach to a router.  I will 
attach photos tomorrow.  Has anyone seen anything like i am describing? 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/327ea8b4-b8b9-4a76-bdb1-9fae51fen%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d9384e%249606e8a0%24c214b9e0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/431225917.71877.1675487755802%40mail.yahoo.com.

RE: Christmas in Feb

2023-02-03 Thread bulkeley 
Bit hard to tell but anything that snaps in I would think would be dangerous in 
a router 

But when you post a pic we might know what you have there

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Mike Newman
Sent: Saturday, 4 February 2023 2:09 PM
To: Legacy Ornamental Mills 
Subject: Christmas in Feb

 

When I bought my LOM 1200 a month ago I was able to get a great price because 
the owner could not find a number of the original parts so I took a chance that 
I would be able to fabricate or find what I needed to do the type of work I 
wanted.  I was able to find/make stuff to get functional.  This week the person 
I bought it from sent me a text that in cleaning up a corner of his shop he 
found a box full of everything that he had gotten with the mill when he bought 
it and wanted to know if I still wanted it since he obviously no longer had any 
need.  After looking at some photos it was obvious that this was everything i 
was missing with some extras like Magnate bits, extra hardware/backer 
plates/drive gears/etc.  The box arrived yesterday and boy was I excited to see 
everything he found.  The one item that I am still trying to ID is not a LOM 
part but appears to be some type of quick change router bit kit that has a base 
unit that may attach to the router and then 8-10 1/4" and 1/2" fittings that 
allow a bit to be set screwed into the sleeve and then the sleeve may then snap 
into the base similar to a quick disconnect air hose fitting.  Still playing 
with it to figure out how it works and how it may attach to a router.  I will 
attach photos tomorrow.  Has anyone seen anything like i am describing? 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/327ea8b4-b8b9-4a76-bdb1-9fae51fen%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d9384e%249606e8a0%24c214b9e0%24%40mmnet.com.au.

Re: Christmas in Feb

2023-02-03 Thread Tim Ziegler 
Wow not sure but would really like to Pix for.
Sounds like a cnc attachment. Lol
If you can take lots of pixels. Maybe someone else will know by
description.
In the mean time someone else reading this read the description  and see if
you recognize  it.
I super glad you found the goodies  to go with the mill.
I have a weird item that come with one of mine as well and still have not
figured it out either.

Well more later

Tim

On Fri, Feb 3, 2023, 9:09 PM Mike Newman  wrote:

> When I bought my LOM 1200 a month ago I was able to get a great price
> because the owner could not find a number of the original parts so I took a
> chance that I would be able to fabricate or find what I needed to do the
> type of work I wanted.  I was able to find/make stuff to get functional.
> This week the person I bought it from sent me a text that in cleaning up a
> corner of his shop he found a box full of everything that he had gotten
> with the mill when he bought it and wanted to know if I still wanted it
> since he obviously no longer had any need.  After looking at some photos it
> was obvious that this was everything i was missing with some extras like
> Magnate bits, extra hardware/backer plates/drive gears/etc.  The box
> arrived yesterday and boy was I excited to see everything he found.  The
> one item that I am still trying to ID is not a LOM part but appears to be
> some type of quick change router bit kit that has a base unit that may
> attach to the router and then 8-10 1/4" and 1/2" fittings that allow a bit
> to be set screwed into the sleeve and then the sleeve may then snap into
> the base similar to a quick disconnect air hose fitting.  Still playing
> with it to figure out how it works and how it may attach to a router.  I
> will attach photos tomorrow.  Has anyone seen anything like i am
> describing?
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/327ea8b4-b8b9-4a76-bdb1-9fae51fen%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGZGNmu%3DXaxsfeWxeXsY332QhUn%2B7LRtW3UmGyp-yeR%3DA%40mail.gmail.com.

Christmas in Feb

2023-02-03 Thread Mike Newman 
When I bought my LOM 1200 a month ago I was able to get a great price 
because the owner could not find a number of the original parts so I took a 
chance that I would be able to fabricate or find what I needed to do the 
type of work I wanted.  I was able to find/make stuff to get functional.  
This week the person I bought it from sent me a text that in cleaning up a 
corner of his shop he found a box full of everything that he had gotten 
with the mill when he bought it and wanted to know if I still wanted it 
since he obviously no longer had any need.  After looking at some photos it 
was obvious that this was everything i was missing with some extras like 
Magnate bits, extra hardware/backer plates/drive gears/etc.  The box 
arrived yesterday and boy was I excited to see everything he found.  The 
one item that I am still trying to ID is not a LOM part but appears to be 
some type of quick change router bit kit that has a base unit that may 
attach to the router and then 8-10 1/4" and 1/2" fittings that allow a bit 
to be set screwed into the sleeve and then the sleeve may then snap into 
the base similar to a quick disconnect air hose fitting.  Still playing 
with it to figure out how it works and how it may attach to a router.  I 
will attach photos tomorrow.  Has anyone seen anything like i am 
describing? 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/327ea8b4-b8b9-4a76-bdb1-9fae51fen%40googlegroups.com.

Re: milling

2023-02-03 Thread Tim Ziegler 
Thanks Tim for jumping in. I agree with you. I think Bill and I both
commented on your youtube.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Feb 3, 2023 at 11:23 AM Tim Woodard  wrote:

> Hey guys I'm sitting back here lurking and reading all the comment if
> you're really interested in helping us out leave these comments inside of
> our comments on the video This helps with engagement on the video and can
> get the video seen by more people
>
> On Fri, Feb 3, 2023, 8:41 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
>> Good morning everyone.
>>
>> Tim I agree 100%, Hats off to anyone who wants to try and show others
>> something that they can do. I cant wait to see the next video.
>>
>> C.A.G.
>>
>> On Friday, February 3, 2023 at 06:48:02 AM EST, Tim Ziegler <
>> timjzieg...@gmail.com> wrote:
>>
>>
>> For sure, it took me a long time to get those things in my head. Hats of
>> to him for trying.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Fri, Feb 3, 2023 at 1:58 AM  wrote:
>>
>> He is new and as he wants a better and better job im sure he will ask
>> questions and we can help
>>
>> I did leave a comment during and after asking for more info on what he is
>> doing like what bits and what pitches
>>
>> He is using and he needs to learn the difference between a rope bit and a
>> barley bit
>>
>> But we all had to learn right
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-ornamental-mills@googlegroups.com>
>> *Sent:* Friday, 3 February 2023 4:27 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: milling
>>
>>
>>
>> Hey Bill.
>>
>>
>>
>> My Mom use to tell me, "If you cant say something nice, Don't say
>> anything at all".
>>
>>
>>
>> You are right about the camera angle. being a novel approach, One that I
>> never though of trying.
>>
>>
>>
>> There were quite of few suggestion that I would like to make While
>> watching this video, In order to help this person get the most out of his
>> Legacy. Simple little things, like plaining off the corners before you try
>> to use the spiral/lead screw. Turning the headstock by hand/lever handle,
>> and moving the Carriage by hand, to make the spindle round. Also, Making
>> the spindle round first, so the spindle dose not have a flat spot, before
>> you try to turn...  (there are more, but I will stop there.)
>>
>> Over all I like the attempt, Perhaps his videos will bring in more
>> people, to start using the Legacy? We can ONLY Hope. ;-)
>>
>>
>>
>> Thanks for sharing this.
>>
>>
>>
>> Have a good day.
>>
>> C.A.G.
>>
>>
>>
>> On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au <
>> bulke...@mmnet.com.au> wrote:
>>
>>
>>
>>
>>
>> https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys
>>
>>
>>
>> just watched this comments ?
>>
>>
>>
>> needs a bit of info like bits used and pitches I think great camera angle
>>
>>
>>
>> Bill
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au
>> 
>> .
>>
>> --
>> You received this message because you are subscribed

RE: milling

2023-02-03 Thread bulkeley 
I did and I will continue to do so on each video you do, and please come on 
here and ask us any thing you wish to know as well

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Woodard
Sent: Saturday, 4 February 2023 4:24 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling

 

Hey guys I'm sitting back here lurking and reading all the comment if you're 
really interested in helping us out leave these comments inside of our comments 
on the video This helps with engagement on the video and can get the video seen 
by more people

 

On Fri, Feb 3, 2023, 8:41 AM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Good morning everyone.

 

Tim I agree 100%, Hats off to anyone who wants to try and show others something 
that they can do. I cant wait to see the next video.

 

C.A.G.

 

On Friday, February 3, 2023 at 06:48:02 AM EST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

For sure, it took me a long time to get those things in my head. Hats of to him 
for trying.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Feb 3, 2023 at 1:58 AM mailto:bulke...@mmnet.com.au> > wrote:

He is new and as he wants a better and better job im sure he will ask questions 
and we can help

I did leave a comment during and after asking for more info on what he is doing 
like what bits and what pitches

He is using and he needs to learn the difference between a rope bit and a 
barley bit 

But we all had to learn right

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Friday, 3 February 2023 4:27 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: milling

 

Hey Bill.

 

My Mom use to tell me, "If you cant say something nice, Don't say anything at 
all". 

 

You are right about the camera angle. being a novel approach, One that I never 
though of trying.

 

There were quite of few suggestion that I would like to make While watching 
this video, In order to help this person get the most out of his Legacy. Simple 
little things, like plaining off the corners before you try to use the 
spiral/lead screw. Turning the headstock by hand/lever handle, and moving the 
Carriage by hand, to make the spindle round. Also, Making the spindle round 
first, so the spindle dose not have a flat spot, before you try to turn...  
(there are more, but I will stop there.) 

Over all I like the attempt, Perhaps his videos will bring in more people, to 
start using the Legacy? We can ONLY Hope. ;-)

 

Thanks for sharing this.

 

Have a good day.

C.A.G. 

 

On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au 
  mailto:bulke...@mmnet.com.au> > wrote: 

 

 

https://www.youtube.com/watch?v=1Zy8Ll7FSM0 
 
&ab_channel=CoupleofBunkys

 

just watched this comments ?

 

needs a bit of info like bits used and pitches I think great camera angle 

 

Bill

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au

Re: milling

2023-02-03 Thread Tim Ziegler 
exactly.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Feb 3, 2023 at 7:41 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Good morning everyone.
>
> Tim I agree 100%, Hats off to anyone who wants to try and show others
> something that they can do. I cant wait to see the next video.
>
> C.A.G.
>
> On Friday, February 3, 2023 at 06:48:02 AM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> For sure, it took me a long time to get those things in my head. Hats of
> to him for trying.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Fri, Feb 3, 2023 at 1:58 AM  wrote:
>
> He is new and as he wants a better and better job im sure he will ask
> questions and we can help
>
> I did leave a comment during and after asking for more info on what he is
> doing like what bits and what pitches
>
> He is using and he needs to learn the difference between a rope bit and a
> barley bit
>
> But we all had to learn right
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, 3 February 2023 4:27 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: milling
>
>
>
> Hey Bill.
>
>
>
> My Mom use to tell me, "If you cant say something nice, Don't say anything
> at all".
>
>
>
> You are right about the camera angle. being a novel approach, One that I
> never though of trying.
>
>
>
> There were quite of few suggestion that I would like to make While
> watching this video, In order to help this person get the most out of his
> Legacy. Simple little things, like plaining off the corners before you try
> to use the spiral/lead screw. Turning the headstock by hand/lever handle,
> and moving the Carriage by hand, to make the spindle round. Also, Making
> the spindle round first, so the spindle dose not have a flat spot, before
> you try to turn...  (there are more, but I will stop there.)
>
> Over all I like the attempt, Perhaps his videos will bring in more people,
> to start using the Legacy? We can ONLY Hope. ;-)
>
>
>
> Thanks for sharing this.
>
>
>
> Have a good day.
>
> C.A.G.
>
>
>
> On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au <
> bulke...@mmnet.com.au> wrote:
>
>
>
>
>
> https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys
>
>
>
> just watched this comments ?
>
>
>
> needs a bit of info like bits used and pitches I think great camera angle
>
>
>
> Bill
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGKBE7M5a237QaJjTwQE_cf3%2BUmxars-Z6eAc1W%3D6RJqQ%40mail.gmail.com
> 
> .
>

Re: milling

2023-02-03 Thread Tim Woodard 
Hey guys I'm sitting back here lurking and reading all the comment if
you're really interested in helping us out leave these comments inside of
our comments on the video This helps with engagement on the video and can
get the video seen by more people

On Fri, Feb 3, 2023, 8:41 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Good morning everyone.
>
> Tim I agree 100%, Hats off to anyone who wants to try and show others
> something that they can do. I cant wait to see the next video.
>
> C.A.G.
>
> On Friday, February 3, 2023 at 06:48:02 AM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> For sure, it took me a long time to get those things in my head. Hats of
> to him for trying.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Fri, Feb 3, 2023 at 1:58 AM  wrote:
>
> He is new and as he wants a better and better job im sure he will ask
> questions and we can help
>
> I did leave a comment during and after asking for more info on what he is
> doing like what bits and what pitches
>
> He is using and he needs to learn the difference between a rope bit and a
> barley bit
>
> But we all had to learn right
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, 3 February 2023 4:27 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: milling
>
>
>
> Hey Bill.
>
>
>
> My Mom use to tell me, "If you cant say something nice, Don't say anything
> at all".
>
>
>
> You are right about the camera angle. being a novel approach, One that I
> never though of trying.
>
>
>
> There were quite of few suggestion that I would like to make While
> watching this video, In order to help this person get the most out of his
> Legacy. Simple little things, like plaining off the corners before you try
> to use the spiral/lead screw. Turning the headstock by hand/lever handle,
> and moving the Carriage by hand, to make the spindle round. Also, Making
> the spindle round first, so the spindle dose not have a flat spot, before
> you try to turn...  (there are more, but I will stop there.)
>
> Over all I like the attempt, Perhaps his videos will bring in more people,
> to start using the Legacy? We can ONLY Hope. ;-)
>
>
>
> Thanks for sharing this.
>
>
>
> Have a good day.
>
> C.A.G.
>
>
>
> On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au <
> bulke...@mmnet.com.au> wrote:
>
>
>
>
>
> https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys
>
>
>
> just watched this comments ?
>
>
>
> needs a bit of info like bits used and pitches I think great camera angle
>
>
>
> Bill
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGKBE7M5a237QaJjTwQE_cf3%2BUmxars-Z6eAc1W%3D6RJqQ%40mail.gmail.com
>

Re: milling

2023-02-03 Thread 'Curt George' via Legacy Ornamental Mills 
 Good morning everyone.
Tim I agree 100%, Hats off to anyone who wants to try and show others something 
that they can do. I cant wait to see the next video.
C.A.G.
On Friday, February 3, 2023 at 06:48:02 AM EST, Tim Ziegler 
 wrote:  
 
 For sure, it took me a long time to get those things in my head. Hats of to 
him for trying.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Fri, Feb 3, 2023 at 1:58 AM  wrote:


He is new and as he wants a better and better job im sure he will ask questions 
and we can help

I did leave a comment during and after asking for more info on what he is doing 
like what bits and what pitches

He is using and he needs to learn the difference between a rope bit and a 
barley bit 

But we all had to learn right

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, 3 February 2023 4:27 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: milling

 

Hey Bill.

 

My Mom use to tell me, "If you cant say something nice, Don't say anything at 
all". 

 

You are right about the camera angle. being a novel approach, One that I never 
though of trying.

 

There were quite of few suggestion that I would like to make While watching 
this video, In order to help this person get the most out of his Legacy. Simple 
little things, like plaining off the corners before you try to use the 
spiral/lead screw. Turning the headstock by hand/lever handle, and moving the 
Carriage by hand, to make the spindle round. Also, Making the spindle round 
first, so the spindle dose not have a flat spot, before you try to turn...  
(there are more, but I will stop there.) 

Over all I like the attempt, Perhaps his videos will bring in more people, to 
start using the Legacy? We can ONLY Hope. ;-)

 

Thanks for sharing this.

 

Have a good day.

C.A.G. 

 

On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au 
 wrote: 

 

 

https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys

 

just watched this comments ?

 

needs a bit of info like bits used and pitches I think great camera angle 

 

Bill

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGKBE7M5a237QaJjTwQE_cf3%2BUmxars-Z6eAc1W%3D6RJqQ%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/237581788.2029669.1675431680683%40mail.yahoo.com.

Re: milling

2023-02-03 Thread Tim Ziegler 
For sure, it took me a long time to get those things in my head. Hats of to
him for trying.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Feb 3, 2023 at 1:58 AM  wrote:

> He is new and as he wants a better and better job im sure he will ask
> questions and we can help
>
> I did leave a comment during and after asking for more info on what he is
> doing like what bits and what pitches
>
> He is using and he needs to learn the difference between a rope bit and a
> barley bit
>
> But we all had to learn right
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, 3 February 2023 4:27 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: milling
>
>
>
> Hey Bill.
>
>
>
> My Mom use to tell me, "If you cant say something nice, Don't say anything
> at all".
>
>
>
> You are right about the camera angle. being a novel approach, One that I
> never though of trying.
>
>
>
> There were quite of few suggestion that I would like to make While
> watching this video, In order to help this person get the most out of his
> Legacy. Simple little things, like plaining off the corners before you try
> to use the spiral/lead screw. Turning the headstock by hand/lever handle,
> and moving the Carriage by hand, to make the spindle round. Also, Making
> the spindle round first, so the spindle dose not have a flat spot, before
> you try to turn...  (there are more, but I will stop there.)
>
> Over all I like the attempt, Perhaps his videos will bring in more people,
> to start using the Legacy? We can ONLY Hope. ;-)
>
>
>
> Thanks for sharing this.
>
>
>
> Have a good day.
>
> C.A.G.
>
>
>
> On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au <
> bulke...@mmnet.com.au> wrote:
>
>
>
>
>
> https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys
>
>
>
> just watched this comments ?
>
>
>
> needs a bit of info like bits used and pitches I think great camera angle
>
>
>
> Bill
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d937a5%243b4f8920%24b1ee9b60%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGKBE7M5a237QaJjTwQE_cf3%2BUmxars-Z6eAc1W%3D6RJqQ%40mail.gmail.com.

Re: milling

2023-02-03 Thread Tim Ziegler 
yup looks like learn and video as you go.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Feb 3, 2023 at 1:51 AM  wrote:

> Well we all have to learn I’m sure he will get better over time and we are
> here to answer any questions
>
>
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Friday, 3 February 2023 4:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: milling
>
>
>
> Yes - GREAT position for the camera.  Not sure why he seemed to plow a
> channel up from the tailstock end (our right to left - to a bit shy of 40%
> of the length).  Then he milled the twist - almost completely removing that
> channel.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Feb 2, 2023 6:43 PM
> To: 
> Subject: milling
>
>
>
> https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys
>
>
>
> just watched this comments ?
>
>
>
> needs a bit of info like bits used and pitches I think great camera angle
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3bad9d51-ee31-dba8-232e-34c286781858%40earthlink.net
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d937a4%2456eb3680%2404c1a380%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHriVCGaPHjso3GEw%2B50pwNO54J5vBs7JUzN_dhhWSPng%40mail.gmail.com.

Re: milling

2023-02-03 Thread Tim Ziegler 
Yeah we all started somewhere. You should see my first sticks. uff.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 2, 2023 at 11:27 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hey Bill.
>
> My Mom use to tell me, "If you cant say something nice, Don't say anything
> at all".
>
> You are right about the camera angle. being a novel approach, One that I
> never though of trying.
>
> There were quite of few suggestion that I would like to make While
> watching this video, In order to help this person get the most out of his
> Legacy. Simple little things, like plaining off the corners before you try
> to use the spiral/lead screw. Turning the headstock by hand/lever handle,
> and moving the Carriage by hand, to make the spindle round. Also, Making
> the spindle round first, so the spindle dose not have a flat spot, before
> you try to turn...  (there are more, but I will stop there.)
> Over all I like the attempt, Perhaps his videos will bring in more people,
> to start using the Legacy? We can ONLY Hope. ;-)
>
> Thanks for sharing this.
>
> Have a good day.
> C.A.G.
>
> On Thursday, February 2, 2023 at 06:43:29 PM EST, bulke...@mmnet.com.au <
> bulke...@mmnet.com.au> wrote:
>
>
> https://www.youtube.com/watch?v=1Zy8Ll7FSM0&ab_channel=CoupleofBunkys
>
>
>
> just watched this comments ?
>
>
>
> needs a bit of info like bits used and pitches I think great camera angle
>
>
>
> Bill
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d93760%241b0f35b0%24512da110%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/581573077.1963997.1675402049848%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF469gwHjq0zAWK3rOdY6L4b-ATCk0dD%3DxGDSmrCKA8dQ%40mail.gmail.com.