date:20230207

Re: Mansards. Master force vise.

2023-02-07 Thread 'Curt George' via Legacy Ornamental Mills

 Hello Eric.
Yes, but the topic was meant for the ratchet handle, and how it could be used, 
Like the gearing index on the OT machine. I was looking at something new and 
somewhat different for the LOM.
C.A.G.
On Tuesday, February 7, 2023 at 02:53:48 PM EST, Eric Gantner 
 wrote:  
 
 Is that a Picture of a Rose Engine?
Eric Gantner

Sent from my iPad

On Jan 27, 2023, at 9:06 AM, 'Curt George' via Legacy Ornamental Mills 
 wrote:



 Good morning guys.
Tim. I wish that was in my shop. But sadly no.
Bill. A ratchet ring spanner ? Perhaps??? I did not think about that.
Buying a ratchet would be pretty close to the same price, (+,-)  Like Tim said, 
Everyone can use a vice, by taking the ratchet off this vice would make the job 
easer, A normal handle on the vice would still make it useable.  I just though 
it was a neat idea. By putting a stop/limit on a ratchet, would make it easy to 
control the movement, and would reduce the need to count holes in an index 
plate.  As I side it was just an idea, Something that I dont need at the time, 
but Perhaps one that I can use in the future?
Have a good day.
C.A.G.
On Friday, January 27, 2023 at 01:27:02 AM EST,  
wrote:  
 
 #yiv5239406644 filtered {}#yiv5239406644 filtered {}#yiv5239406644 filtered 
{}#yiv5239406644 p.yiv5239406644MsoNormal, #yiv5239406644 
li.yiv5239406644MsoNormal, #yiv5239406644 div.yiv5239406644MsoNormal 
{margin:0cm;font-size:11pt;font-family:Calibri, sans-serif;}#yiv5239406644 
a:link, #yiv5239406644 span.yiv5239406644MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv5239406644 
span.yiv5239406644EmailStyle19 {font-family:Arial, 
sans-serif;color:windowtext;}#yiv5239406644 .yiv5239406644MsoChpDefault 
{font-size:10pt;}#yiv5239406644 filtered {}#yiv5239406644 
div.yiv5239406644WordSection1 {}
Cant you just buy a tool kit ratchet instead of the whole thing or even a 
ratchet ring spanner ?

  

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, 27 January 2023 4:51 PM
To: Legacy ornamental mills 
Subject: Mansards. Master force vise.

  

Hello Everyone.

Just found this today, It may sound dumb, but I want to buy one and use the 
ratchet handle on my Legacy, If I can make an adjustable limit bracket, this 
could be very handy. (Like the photo below.) It would be a very neat way of 
indexing,  

https://www.menards.com/main/tools/hand-tools/clamps-vises/masterforce-reg-low-profile-vise/65156/p-136618025-c-9135.htm?tid=6618178562760728390=7=true
   $37.00





https://www.facebook.com/johncookharmonicas/videos/6683015205058261?idorvanity=1509604172399116
 video.
  

Something to think about.

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1450898783.139359.1674798682119%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93218%24260843a0%247218cae0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1867345353.206778.1674828349429%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/29A2B52C-07EC-41AE-8D95-13E06DDEE8C3%40gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2050458230.1017493.1675833067446%40mail.yahoo.com.

Re: STOP THE PRESS, NEW SPLIT NUT

2023-02-07 Thread Tim Ziegler

Hey Vadim,

The material I actually used is UHMW it's a self healing plastic.
so far its working great.
Pretty sure you can find it at Grainger, Ebay and Amazon.
The last stuff I got was through where I used to work.

https://www.differencebetween.com/difference-between-uhmw-and-vs-hdpe/

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 7, 2023 at 7:44 PM Vadim Sidelnikov 
wrote:

> Tim, just found this discussion when I was looking at making split nuts.
> Question for ya: 1) how this is the HDPE you're using here and 2) where do
> you buy it?
>
> On Sun, Nov 6, 2022 at 6:56 PM timjz...@gmail.com 
> wrote:
>
>> Well I finally took the time to make a couple of split nuts from a
>> material
>> referred to as HDPE, a self healing white plastic that actually drills
>> and
>> taps very nicely.
>> I took all my measurements from an other split nut. and cut to a size the
>> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
>> point
>> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
>> and
>> forth continually cleaning it out.
>> Once I completed that I cut the block in 2 pieces on the scroll saw.
>> I then marked the hole for the thumb screw and drilled with a 6.5 mm
>> drill bit.
>> Tapping then with a 5/16 course thread tap.
>> During the drilling process I used the Rocker pen vise.
>> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
>> block,
>> and save the fingers.
>> Overall I am super happy I took the time to make some and they fit
>> perfect.
>> there is NO play in that carriage now. Not sure how long they will last,
>> but may
>> make some with Delrin at some point too.
>> See photos attached.
>>
>> Kind regards,
>>
>> Tim J Ziegler
>> Ziegler WoodWork & Specialty
>> Ziegler Laser Worx
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8rchZNU%3D1hepdM9Y%3DoNZ9ZxKKC6zEmVVhjd_gKAKp8%2BvrA%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE%3DPdRy4LPyj01Vnakwxvjhja7OA9NQxmwz5fX5Cs%3D5sA%40mail.gmail.com.

Re: STOP THE PRESS, NEW SPLIT NUT

2023-02-07 Thread Vadim Sidelnikov

Tim, just found this discussion when I was looking at making split nuts.
Question for ya: 1) how this is the HDPE you're using here and 2) where do
you buy it?

On Sun, Nov 6, 2022 at 6:56 PM timjz...@gmail.com 
wrote:

> Well I finally took the time to make a couple of split nuts from a
> material
> referred to as HDPE, a self healing white plastic that actually drills and
> taps very nicely.
> I took all my measurements from an other split nut. and cut to a size the
> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
> point
> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
> and
> forth continually cleaning it out.
> Once I completed that I cut the block in 2 pieces on the scroll saw.
> I then marked the hole for the thumb screw and drilled with a 6.5 mm drill
> bit.
> Tapping then with a 5/16 course thread tap.
> During the drilling process I used the Rocker pen vise.
> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
> block,
> and save the fingers.
> Overall I am super happy I took the time to make some and they fit perfect.
> there is NO play in that carriage now. Not sure how long they will last,
> but may
> make some with Delrin at some point too.
> See photos attached.
>
> Kind regards,
>
> Tim J Ziegler
> Ziegler WoodWork & Specialty
> Ziegler Laser Worx
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8rchZNU%3D1hepdM9Y%3DoNZ9ZxKKC6zEmVVhjd_gKAKp8%2BvrA%40mail.gmail.com.

Re: Mansards. Master force vise.

2023-02-07 Thread Tim Ziegler

Yeah Curt and I get a little excited over them.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 7, 2023 at 1:53 PM Eric Gantner 
wrote:

> Is that a Picture of a Rose Engine?
>
> Eric Gantner
>
> Sent from my iPad
>
> On Jan 27, 2023, at 9:06 AM, 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> 
> Good morning guys.
>
> Tim. I wish that was in my shop. But sadly no.
>
> Bill. A ratchet ring spanner ? Perhaps??? I did not think about that.
>
> Buying a ratchet would be pretty close to the same price, (+,-)  Like Tim
> said, Everyone can use a vice, by taking the ratchet off this vice would
> make the
> job easer, A normal handle on the vice would still make it useable.  I
> just though it
> was a neat idea. By putting a stop/limit on a ratchet, would make it easy
> to control
> the movement, and would reduce the need to count holes in an index plate.
> As I side
> it was just an idea, Something that I dont need at the time, but Perhaps
> one that I can
> use in the future?
>
> Have a good day.
>
> C.A.G.
>
> On Friday, January 27, 2023 at 01:27:02 AM EST, 
> wrote:
>
>
> Cant you just buy a tool kit ratchet instead of the whole thing or even a
> ratchet ring spanner ?
>
>
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, 27 January 2023 4:51 PM
> *To:* Legacy ornamental mills 
> *Subject:* Mansards. Master force vise.
>
>
>
> Hello Everyone.
>
> Just found this today, It may sound dumb, but I want to buy one and use
> the ratchet handle on my Legacy, If I can make an adjustable limit bracket,
> this could be very handy. (Like the photo below.) It would be a very neat
> way of indexing,
>
>
> https://www.menards.com/main/tools/hand-tools/clamps-vises/masterforce-reg-low-profile-vise/65156/p-136618025-c-9135.htm?tid=6618178562760728390=7=true
>  $37.00
>
> 
>
> 
>
>
>
> https://www.facebook.com/johncookharmonicas/videos/6683015205058261?idorvanity=1509604172399116
>  video.
>
>
>
> Something to think about.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1450898783.139359.1674798682119%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93218%24260843a0%247218cae0%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1867345353.206778.1674828349429%40mail.yahoo.com
> 
> .
> 
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/29A2B52C-07EC-41AE-8D95-13E06DDEE8C3%40gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJy_Yxs9b%3DCnVi2Ufvgnsk8EO90WUCJdNH0Nu9Fi6MNA%40mail.gmail.com.

Re: ribbon spiral

2023-02-07 Thread Tim Ziegler

oh wow yeah that was a couple minutes ago lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 7, 2023 at 1:44 PM Eric Gantner 
wrote:

> Tim,
>
> I think I am good.  Sorry for the late reply, I have a hard time keeping
> up with these threads/post.  
>
> Eric
>
> Sent from my iPad
>
> On Jan 30, 2023, at 7:22 PM, Tim Ziegler  wrote:
>
> 
> Hey Eric,
>
> Do you have questions on your assembly? Jeff Richmond has a 900 and can
> help guide you if you need along
> with other questions most of the guys are willing to give and or offer
> suggestions.
> Do you have any of the videos for assembly?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Jan 30, 2023 at 6:06 PM Eric Gantner 
> wrote:
>
>> That’s cool, I am still putting my 900 together.
>>
>> Eric G.
>>
>> On Monday, January 30, 2023 at 1:49:59 PM UTC-5 Va Oak wrote:
>>
>>> Bill,
>>>
>>> Nice - thanks for sharing.
>>>
>>> Now how about going back to that one and adding one "ribbon twist"
>>> between the one you just made.
>>>
>>> Than go back and add one onto that one - creating "stacked twists"?
>>>
>>> Mac
>>> --
>>> --
>>>
>>> -Original Message-
>>> From: 
>>> Sent: Jan 30, 2023 4:06 AM
>>> To: 
>>> Subject: ribbon spiral
>>>
>>>
>>>
>>> Got a bit of shop time today so I used my new z axis and made a quick
>>> ribbon spiral, no how to video sorry
>>>
>>> https://www.dropbox.com/s/64wu97rffw9r89r/ribbon%20spiral.mp4?dl=0
>>>
>>>
>>>
>>> just a few seconds of it finished. I have a few adjustments to do a
>>> finer pitch I think 4 inches instead
>>>
>>> of 8 inches  and I will do it on a tapered blank this one was a strait
>>> blank.
>>>
>>> This is actually my first one of these I always meant to mill one with
>>> my first tilting z axis but I never did seem to find the time.
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93489%24e78e5910%24b6ab0b30%24%40mmnet.com.au
>>> 
>>> .
>>>
>>>
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/78a06536-62a8-4625-b1bb-ddf8c2025cfan%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH6DFGS_97%2Bvj_GxnnaUrkB36V0LTuTDa%3D%2B3FBwc9AVaQ%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/93DD38F4-94B1-4A69-AFDE-DCFE5A7C5534%40gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE5XbT0Q%2BEBESrGEoBHmVZ-MimM58nic%2B-OL416nTWnXA%40mail.gmail.com.

Re: Mansards. Master force vise.

2023-02-07 Thread Eric Gantner

Is that a Picture of a Rose Engine?Eric GantnerSent from my iPadOn Jan 27, 2023, at 9:06 AM, 'Curt George' via Legacy Ornamental Mills wrote:
Good morning guys.Tim. I wish that was in my shop. But sadly no.Bill. A ratchet ring spanner ? Perhaps??? I did not think about that.Buying a ratchet would be pretty close to the same price, (+,-) Like Tim said, Everyone can use a vice, by taking the ratchet off this vice would make the job easer, A normal handle on the vice would still make it useable. I just though it was a neat idea. By putting a stop/limit on a ratchet, would make it easy to control the movement, and would reduce the need to count holes in an index plate. As I side it was just an idea, Something that I dont need at the time, but Perhaps one that I can use in the future?Have a good day.C.A.G.

On Friday, January 27, 2023 at 01:27:02 AM EST, wrote:

Cant you just buy a tool kit ratchet instead of the whole thing or even a ratchet ring spanner ? Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Friday, 27 January 2023 4:51 PMTo: Legacy ornamental mills Subject: Mansards. Master force vise. Hello Everyone.Just found this today, It may sound dumb, but I want to buy one and use the ratchet handle on my Legacy, If I can make an adjustable limit bracket, this could be very handy. (Like the photo below.) It would be a very neat way of indexing, https://www.menards.com/main/tools/hand-tools/clamps-vises/masterforce-reg-low-profile-vise/65156/p-136618025-c-9135.htm?tid=6618178562760728390=7=true $37.00https://www.facebook.com/johncookharmonicas/videos/6683015205058261?idorvanity=1509604172399116 video. Something to think about. C.A.G.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1450898783.139359.1674798682119%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93218%24260843a0%247218cae0%24%40mmnet.com.au.

Re: ribbon spiral

2023-02-07 Thread Eric Gantner

Tim, I think I am good. Sorry for the late reply, I have a hard time keeping up with these threads/post.  EricSent from my iPadOn Jan 30, 2023, at 7:22 PM, Tim Ziegler wrote:Hey Eric,Do you have questions on your assembly? Jeff Richmond has a 900 and can help guide you if you need alongwith other questions most of the guys are willing to give and or offer suggestions. Do you have any of the videos for assembly?Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Mon, Jan 30, 2023 at 6:06 PM Eric Gantner wrote:That’s cool, I am still putting my 900 together. Eric G. On Monday, January 30, 2023 at 1:49:59 PM UTC-5 Va Oak wrote:Bill,
Nice - thanks for sharing.
Now how about going back to that one and adding one "ribbon twist" between the one you just made.
Than go back and add one onto that one - creating "stacked twists"?
Mac

-Original Message-From: Sent: Jan 30, 2023 4:06 AMTo: Subject: ribbon spiral

Got a bit of shop time today so I used my new z axis and made a quick ribbon spiral, no how to video sorry
https://www.dropbox.com/s/64wu97rffw9r89r/ribbon%20spiral.mp4?dl=0
just a few seconds of it finished. I have a few adjustments to do a finer pitch I think 4 inches instead
of 8 inches and I will do it on a tapered blank this one was a strait blank.
This is actually my first one of these I always meant to mill one with my first tilting z axis but I never did seem to find the time.
Bill

-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93489%24e78e5910%24b6ab0b30%24%40mmnet.com.au.

Re: Mansards. Master force vise.

Re: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

Re: Mansards. Master force vise.

Re: ribbon spiral

Re: Mansards. Master force vise.

Re: ribbon spiral

7 matches

Site Navigation

Mail list logo

Footer information