Re: Thin Stock support block dimensions

['Denson Ingram' via Legacy Ornamental Mills]

Great job Mike, works just like it ought.DensonSent from Denson's iPhoneOn Feb 16, 2023, at 9:51 PM, Tim Ziegler  wrote:Good deal, with a pc of stock that long you may want the second one in there too. Then also lighter cuts and you will have it made.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Thu, Feb 16, 2023 at 7:54 PM Mike Newman  wrote:I was able to sneak out to the shop tonight to try out the thin stock support.  It worked almost perfect and much better than the first one I made.  Turned down a poplar blank for my first tapered walking stick and there was limited chatter.  Still a couple of things to pay attention to but definitely the way to go for me right now.<20230216_190339.jpg>On Wednesday, February 15, 2023 at 11:14:24 PM UTC-6 Curt George wrote:
Very nice, Mike.I think it should work well for you.Best of luck.C.A.G.





On Wednesday, February 15, 2023 at 06:44:51 PM EST, Mike Newman  wrote:



I finished my new thin stock support earlier tonight based on the info you guys provided.  I have not tried it yet but should work similar to the factory one.  I will throw another walking stick blank up on the LOM this weekend and see how it works.On Monday, February 13, 2023 at 10:48:26 PM UTC-6 Denson Ingram wrote:Yes sir you are welcome.DensonSent from my iPadOn Feb 13, 2023, at 9:40 PM, Tim Ziegler  wrote:Hey Denson thanks for jumping in on that. Great job.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Mon, Feb 13, 2023 at 5:49 PM 'Denson Ingram' via Legacy Ornamental Mills  wrote:Mike those pieces are 2 1/4” w x 1 1/4” L x 1 1/4” thickDensonSent from Denson's iPhoneOn Feb 13, 2023, at 5:20 PM, Mike Newman  wrote:Does anyone already have the dimension for the hdpe blocks used on the factory thin stock support?  I finally found a block of the material that I can make my own, but wanted to get the dimensions.  Overall dimensions and then size/position of the v-notch should be all I need.  I will attach it to my cross member I used for my first trial design.  If anyone has one of the actual factory take a few measurements and post them or email me direct.  I can figure it out if nobody has a factory one, but thought I would quickly check before I go down that road?  thanks



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d9930f81-cbb4-4da0-bd7d-bfe71e6ea51dn%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/ADA4C3D3-0AB3-4E75-9026-8AF9A463DFDB%40yahoo.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGzZ8NYhZOBV-oos%2BmhbUAJonnDo7%3DNM-XX0xqyVBiwiA%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/640be98b-dc01-4a22-bbe5-f19a7c9a163dn%40googlegroups.com.






-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/93b9ab0c-db33-4070-b0fe-7e19733469bfn%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

Re: Eric 900

[Tim Ziegler]

like you said, always tomorrow. Glad you're enjoying it.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 16, 2023 at 9:19 PM Eric Gantner 
wrote:

> I fell short on working on my handle today, I am going to re-attack
> tomorrow.
>
> Eric
>
> On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler 
> wrote:
>
>> The only way you get good at something is to keep working at it. Biggest
>> thing will be getting the square hole correctly.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> 
>> Foreston MN 56330
>> 
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
>> wrote:
>>
>>> Bill,
>>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>>
>>> Eric
>>>
>>>
>>> Sent from my iPad
>>>
>>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>>
>>> 
>>>
>>> Do you have any welding skills one would not be that hard to make
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>>> *Sent:* Thursday, 16 February 2023 11:22 AM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Re: Eric 900
>>>
>>>
>>>
>>> Tim if you have time please check for a handle?
>>>
>>> Sent from my iPad
>>>
>>>
>>>
>>> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>>>
>>> 
>>>
>>> Hey Eric,
>>>
>>>
>>>
>>> I almost forgot to look to see if I had an extra handle, remind me
>>> tomorrow and I will check.
>>>
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 
>>>
>>>
>>>
>>> 320-294-5798 shop
>>>
>>> 320-630-2243 cell
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>>>
>>> I have a 900 too (with a handle) and I use Tim’s approach as well.
>>>
>>>
>>>
>>> Rick
>>>
>>>
>>>
>>> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>>>
>>> 
>>>
>>> Hey Eric,
>>>
>>>
>>>
>>> It is slow but still cool you can do both. Many times I use my lathe to
>>> round them, sand,  then play on the LOM with
>>>
>>> all the decore. But over all it does a really good job.
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 
>>>
>>>
>>>
>>> 320-294-5798 shop
>>>
>>> 320-630-2243 cell
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
>>> wrote:
>>>
>>>  I turned on my 900 today, and tried to make round stock.  Coming from a
>>> lathe I found it slow, but I am not sure if I was doing it right.  I was
>>> moving my sled with the crank and hand turning the wood, because I do not
>>> have a handle yet.  Anyway I am still learning so that is always fun!
>>>
>>> 
>>>
>>> 
>>>
>>> 
>>>
>>>
>>>
>>> Sent from my iPad
>>>
>>>
>>>
>>> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>>>
>>> 
>>>
>>> yup figured that our. Just had to go to the right pix. lol.
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 
>>>
>>>
>>>
>>> 320-294-5798 shop
>>>
>>> 320-630-2243 cell
>>>
>>>
>>>
>>>
>>>
>>> On Wed, Feb 8, 2023 at 10:04 PM  wrote:
>>>
>>> What they are is the name of each pic
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>>> *Sent:* Thursday, 9 February 2023 2:29 PM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Re: Eric 900
>>>
>>>
>>>
>>> I don't see the names on them for him Bill?
>>>
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 

Re: Eric 900

[Tim Ziegler]

No all looks ok from my end. LIke you said, hope that all the gears are
there.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 16, 2023 at 6:34 PM Eric Gantner 
wrote:

> Here are all the pictures posted for the ad, if you see something way off
> please let me know.  Thanks
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/6741BA1C-EA2B-44DA-8E95-46BAF3A734C0%40gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/6741BA1C-EA2B-44DA-8E95-46BAF3A734C0%40gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/6741BA1C-EA2B-44DA-8E95-46BAF3A734C0%40gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/6741BA1C-EA2B-44DA-8E95-46BAF3A734C0%40gmail.com
> 
> .
>
>
> Sent from my iPad
>
> On Feb 16, 2023, at 6:06 PM, Eric Gantner 
> wrote:
>
> 
> Bill,
>
> For sure, as of right now I plan to get it Monday morning.  She is trying
> to sell me a panel saw, lol
>
> Eric
>
> On Thu, Feb 16, 2023 at 4:23 PM  wrote:
>
>> Now that you own it perhaps you could post all the pics of it so we can
>> see all of what you have
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Friday, 17 February 2023 2:50 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> You are right there.  So she took 500 for the Wood Chuck.  I just have to
>> get up there.  In the end it might save me a few bucks as long as all the
>> gears are there etc. it appears there is a deep shelf above the machine
>> maybe I luck out and there will be a circle deal up there.  The gent must
>> have been in business, based off the stuff the is selling.  Might find
>> more!  More to follow.
>>
>>
>>
>> On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler 
>> wrote:
>>
>> The only way you get good at something is to keep working at it. Biggest
>> thing will be getting the square hole correctly.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
>> wrote:
>>
>> Bill,
>>
>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>
>>
>>
>> Eric
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>
>> 
>>
>> Do you have any welding skills one would not be that hard to make
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 16 February 

Re: Eric 900

[Tim Ziegler]

Well depending on what your doing they are awfully handy. I have a Safety
Speed Cut panel saw that has saved my back
many times over. Just slide the plywood in, rather then fight it on a table
saw.
If the price is right it may be worth it. Especially if you get it as a "2
for" deal.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 16, 2023 at 5:06 PM Eric Gantner 
wrote:

> Bill,
>
> For sure, as of right now I plan to get it Monday morning.  She is trying
> to sell me a panel saw, lol
>
> Eric
>
> On Thu, Feb 16, 2023 at 4:23 PM  wrote:
>
>> Now that you own it perhaps you could post all the pics of it so we can
>> see all of what you have
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Friday, 17 February 2023 2:50 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> You are right there.  So she took 500 for the Wood Chuck.  I just have to
>> get up there.  In the end it might save me a few bucks as long as all the
>> gears are there etc. it appears there is a deep shelf above the machine
>> maybe I luck out and there will be a circle deal up there.  The gent must
>> have been in business, based off the stuff the is selling.  Might find
>> more!  More to follow.
>>
>>
>>
>> On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler 
>> wrote:
>>
>> The only way you get good at something is to keep working at it. Biggest
>> thing will be getting the square hole correctly.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
>> wrote:
>>
>> Bill,
>>
>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>
>>
>>
>> Eric
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>
>> 
>>
>> Do you have any welding skills one would not be that hard to make
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 16 February 2023 11:22 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> Tim if you have time please check for a handle?
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> I almost forgot to look to see if I had an extra handle, remind me
>> tomorrow and I will check.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>>
>> I have a 900 too (with a handle) and I use Tim’s approach as well.
>>
>>
>>
>> Rick
>>
>>
>>
>> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> It is slow but still cool you can do both. Many times I use my lathe to
>> round them, sand,  then play on the LOM with
>>
>> all the decore. But over all it does a really good job.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
>> wrote:
>>
>>  I turned on my 900 today, and tried to make round stock.  Coming from a
>> lathe I found it slow, but I am not sure if I was doing it right.  I was
>> moving my sled with the crank and hand turning the wood, because I do not
>> have a handle yet.  Anyway I am still learning so that is always fun!
>>
>> 
>>
>> 
>>
>> 
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>>
>> 
>>
>> yup figured that our. Just had to go to the right pix. lol.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 

Re: Eric 900

[Tim Ziegler]

Super excited for you Eric, Yeah I hope you score big time on the shelf
load of goods. lol

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 16, 2023 at 9:49 AM Eric Gantner 
wrote:

> You are right there.  So she took 500 for the Wood Chuck.  I just have to
> get up there.  In the end it might save me a few bucks as long as all the
> gears are there etc. it appears there is a deep shelf above the machine
> maybe I luck out and there will be a circle deal up there.  The gent must
> have been in business, based off the stuff the is selling.  Might find
> more!  More to follow.
>
> On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler 
> wrote:
>
>> The only way you get good at something is to keep working at it. Biggest
>> thing will be getting the square hole correctly.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> 
>> Foreston MN 56330
>> 
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
>> wrote:
>>
>>> Bill,
>>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>>
>>> Eric
>>>
>>>
>>> Sent from my iPad
>>>
>>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>>
>>> 
>>>
>>> Do you have any welding skills one would not be that hard to make
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>>> *Sent:* Thursday, 16 February 2023 11:22 AM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Re: Eric 900
>>>
>>>
>>>
>>> Tim if you have time please check for a handle?
>>>
>>> Sent from my iPad
>>>
>>>
>>>
>>> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>>>
>>> 
>>>
>>> Hey Eric,
>>>
>>>
>>>
>>> I almost forgot to look to see if I had an extra handle, remind me
>>> tomorrow and I will check.
>>>
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 
>>>
>>>
>>>
>>> 320-294-5798 shop
>>>
>>> 320-630-2243 cell
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>>>
>>> I have a 900 too (with a handle) and I use Tim’s approach as well.
>>>
>>>
>>>
>>> Rick
>>>
>>>
>>>
>>> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>>>
>>> 
>>>
>>> Hey Eric,
>>>
>>>
>>>
>>> It is slow but still cool you can do both. Many times I use my lathe to
>>> round them, sand,  then play on the LOM with
>>>
>>> all the decore. But over all it does a really good job.
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 
>>>
>>>
>>>
>>> 320-294-5798 shop
>>>
>>> 320-630-2243 cell
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
>>> wrote:
>>>
>>>  I turned on my 900 today, and tried to make round stock.  Coming from a
>>> lathe I found it slow, but I am not sure if I was doing it right.  I was
>>> moving my sled with the crank and hand turning the wood, because I do not
>>> have a handle yet.  Anyway I am still learning so that is always fun!
>>>
>>> 
>>>
>>> 
>>>
>>> 
>>>
>>>
>>>
>>> Sent from my iPad
>>>
>>>
>>>
>>> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>>>
>>> 
>>>
>>> yup figured that our. Just had to go to the right pix. lol.
>>>
>>> Kind Regards,
>>>
>>>
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>> 
>>>
>>> Foreston MN 56330
>>> 
>>>
>>>
>>>
>>> 320-294-5798 shop
>>>
>>> 320-630-2243 cell
>>>
>>>
>>>
>>>
>>>
>>> On Wed, Feb 8, 2023 at 10:04 PM  wrote:
>>>
>>> What they are is the name of each pic
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>>> *Sent:* Thursday, 9 February 2023 2:29 PM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>> *Subject:* Re: Eric 900
>>>
>>>

Re: Eric 900

[Eric Gantner]

I fell short on working on my handle today, I am going to re-attack
tomorrow.

Eric

On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler  wrote:

> The only way you get good at something is to keep working at it. Biggest
> thing will be getting the square hole correctly.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> 
> Foreston MN 56330
> 
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
> wrote:
>
>> Bill,
>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>
>> Eric
>>
>>
>> Sent from my iPad
>>
>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>
>> 
>>
>> Do you have any welding skills one would not be that hard to make
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 16 February 2023 11:22 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> Tim if you have time please check for a handle?
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> I almost forgot to look to see if I had an extra handle, remind me
>> tomorrow and I will check.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>>
>> I have a 900 too (with a handle) and I use Tim’s approach as well.
>>
>>
>>
>> Rick
>>
>>
>>
>> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> It is slow but still cool you can do both. Many times I use my lathe to
>> round them, sand,  then play on the LOM with
>>
>> all the decore. But over all it does a really good job.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
>> wrote:
>>
>>  I turned on my 900 today, and tried to make round stock.  Coming from a
>> lathe I found it slow, but I am not sure if I was doing it right.  I was
>> moving my sled with the crank and hand turning the wood, because I do not
>> have a handle yet.  Anyway I am still learning so that is always fun!
>>
>> 
>>
>> 
>>
>> 
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>>
>> 
>>
>> yup figured that our. Just had to go to the right pix. lol.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 8, 2023 at 10:04 PM  wrote:
>>
>> What they are is the name of each pic
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Thursday, 9 February 2023 2:29 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> I don't see the names on them for him Bill?
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 8, 2023 at 8:26 PM  wrote:
>>
>> Ok here are your pics back with their names hope it helps if not just ask
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 9 February 2023 12:06 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> 

Re: Eric 900

[Eric Gantner]

Appreciate it Jeff!

On Thu, Feb 16, 2023 at 8:02 PM Jeff Richmond  wrote:

> Congrats Eric. 
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Feb 16, 2023, at 6:06 PM, Eric Gantner 
> wrote:
>
> 
> Bill,
>
> For sure, as of right now I plan to get it Monday morning.  She is trying
> to sell me a panel saw, lol
>
> Eric
>
> On Thu, Feb 16, 2023 at 4:23 PM  wrote:
>
>> Now that you own it perhaps you could post all the pics of it so we can
>> see all of what you have
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Friday, 17 February 2023 2:50 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> You are right there.  So she took 500 for the Wood Chuck.  I just have to
>> get up there.  In the end it might save me a few bucks as long as all the
>> gears are there etc. it appears there is a deep shelf above the machine
>> maybe I luck out and there will be a circle deal up there.  The gent must
>> have been in business, based off the stuff the is selling.  Might find
>> more!  More to follow.
>>
>>
>>
>> On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler 
>> wrote:
>>
>> The only way you get good at something is to keep working at it. Biggest
>> thing will be getting the square hole correctly.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
>> wrote:
>>
>> Bill,
>>
>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>
>>
>>
>> Eric
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>
>> 
>>
>> Do you have any welding skills one would not be that hard to make
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 16 February 2023 11:22 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> Tim if you have time please check for a handle?
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> I almost forgot to look to see if I had an extra handle, remind me
>> tomorrow and I will check.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>>
>> I have a 900 too (with a handle) and I use Tim’s approach as well.
>>
>>
>>
>> Rick
>>
>>
>>
>> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> It is slow but still cool you can do both. Many times I use my lathe to
>> round them, sand,  then play on the LOM with
>>
>> all the decore. But over all it does a really good job.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
>> wrote:
>>
>>  I turned on my 900 today, and tried to make round stock.  Coming from a
>> lathe I found it slow, but I am not sure if I was doing it right.  I was
>> moving my sled with the crank and hand turning the wood, because I do not
>> have a handle yet.  Anyway I am still learning so that is always fun!
>>
>> 
>>
>> 
>>
>> 
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>>
>> 
>>
>> yup figured that our. Just had to go to the right pix. lol.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> 

Re: Eric 900

[Jeff Richmond]

Congrats Eric. Jeff from Connecticut Sent from my iPhoneOn Feb 16, 2023, at 6:06 PM, Eric Gantner  wrote:Bill, For sure, as of right now I plan to get it Monday morning.  She is trying to sell me a panel saw, lolEricOn Thu, Feb 16, 2023 at 4:23 PM  wrote:Now that you own it perhaps you could post all the pics of it so we can see all of what you have Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Friday, 17 February 2023 2:50 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Eric 900 You are right there.  So she took 500 for the Wood Chuck.  I just have to get up there.  In the end it might save me a few bucks as long as all the gears are there etc. it appears there is a deep shelf above the machine maybe I luck out and there will be a circle deal up there.  The gent must have been in business, based off the stuff the is selling.  Might find more!  More to follow.  On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler  wrote:The only way you get good at something is to keep working at it. Biggest thing will be getting the square hole correctly. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner  wrote:Bill, Great idea.  You asked the right question.  Yes I have tanks/ torch set and a Mig welder, can I weld well I kind have the idea.  My old neighbor gave me a crash course, a year or so ago.  So I think I can do it,  may not look pretty.  I am home all week, I will break out my stuff tomorrow.   Eric  Sent from my iPadOn Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:Do you have any welding skills one would not be that hard to make  Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Thursday, 16 February 2023 11:22 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Eric 900 Tim if you have time please check for a handle?  Sent from my iPad On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:Hey Eric,  I almost forgot to look to see if I had an extra handle, remind me tomorrow and I will check. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:I have a 900 too (with a handle) and I use Tim’s approach as well. Rick On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:Hey Eric, It is slow but still cool you can do both. Many times I use my lathe to round them, sand,  then play on the LOM with all the decore. But over all it does a really good job. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner  wrote: I turned on my 900 today, and tried to make round stock.  Coming from a lathe I found it slow, but I am not sure if I was doing it right.  I was moving my sled with the crank and hand turning the wood, because I do not have a handle yet.  Anyway I am still learning so that is always fun!   Sent from my iPad On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:yup figured that our. Just had to go to the right pix. lol.Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Wed, Feb 8, 2023 at 10:04 PM  wrote:What they are is the name of each pic Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Thursday, 9 February 2023 2:29 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Eric 900 I don't see the names on them for him Bill? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Wed, Feb 8, 2023 at 8:26 PM  wrote:Ok here are your pics back with their names hope it helps if not just ask  Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Thursday, 9 February 2023 12:06 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Eric 900 Here pics of parts that came with the machine, one I know was posted not too long ago, the duplicator.  The others I am not to sure about, maybe 1  or 2 extra parts.  School me fellas!  Eric GantnerSent from my iPad On Feb 8, 2023, at 7:16 PM, Tim Ziegler  wrote:Pix are worth a thousand words  On Wed, Feb 8, 2023, 5:40 PM Eric Gantner  wrote:Bill,  Thanks, I will also take pictures of the whole mill. Eric Gantner On Wed, Feb 8, 2023 at 6:34 PM 

Re: Eric 900

[Eric Gantner]

Bill,

For sure, as of right now I plan to get it Monday morning.  She is trying
to sell me a panel saw, lol

Eric

On Thu, Feb 16, 2023 at 4:23 PM  wrote:

> Now that you own it perhaps you could post all the pics of it so we can
> see all of what you have
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
> *Sent:* Friday, 17 February 2023 2:50 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Eric 900
>
>
>
> You are right there.  So she took 500 for the Wood Chuck.  I just have to
> get up there.  In the end it might save me a few bucks as long as all the
> gears are there etc. it appears there is a deep shelf above the machine
> maybe I luck out and there will be a circle deal up there.  The gent must
> have been in business, based off the stuff the is selling.  Might find
> more!  More to follow.
>
>
>
> On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler 
> wrote:
>
> The only way you get good at something is to keep working at it. Biggest
> thing will be getting the square hole correctly.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
> 
>
> Foreston MN 56330
> 
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
> wrote:
>
> Bill,
>
> Great idea.  You asked the right question.  Yes I have tanks/ torch set
> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
> gave me a crash course, a year or so ago.  So I think I can do it,  may not
> look pretty.  I am home all week, I will break out my stuff tomorrow.
>
>
>
> Eric
>
>
>
> Sent from my iPad
>
>
>
> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>
> 
>
> Do you have any welding skills one would not be that hard to make
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
> *Sent:* Thursday, 16 February 2023 11:22 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Eric 900
>
>
>
> Tim if you have time please check for a handle?
>
> Sent from my iPad
>
>
>
> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>
> 
>
> Hey Eric,
>
>
>
> I almost forgot to look to see if I had an extra handle, remind me
> tomorrow and I will check.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
> 
>
> Foreston MN 56330
> 
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>
> I have a 900 too (with a handle) and I use Tim’s approach as well.
>
>
>
> Rick
>
>
>
> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>
> 
>
> Hey Eric,
>
>
>
> It is slow but still cool you can do both. Many times I use my lathe to
> round them, sand,  then play on the LOM with
>
> all the decore. But over all it does a really good job.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
> 
>
> Foreston MN 56330
> 
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
> wrote:
>
>  I turned on my 900 today, and tried to make round stock.  Coming from a
> lathe I found it slow, but I am not sure if I was doing it right.  I was
> moving my sled with the crank and hand turning the wood, because I do not
> have a handle yet.  Anyway I am still learning so that is always fun!
>
> 
>
> 
>
> 
>
>
>
> Sent from my iPad
>
>
>
> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>
> 
>
> yup figured that our. Just had to go to the right pix. lol.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
> 
>
> Foreston MN 56330
> 
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 8, 2023 at 10:04 PM  wrote:
>
> What they are is the name of each pic
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 9 February 2023 2:29 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Eric 900
>
>
>
> I don't see the names on them for him Bill?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler 

RE: Eric 900

[bulkeley]

Now that you own it perhaps you could post all the pics of it so we can see all 
of what you have

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Eric Gantner
Sent: Friday, 17 February 2023 2:50 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Eric 900

 

You are right there.  So she took 500 for the Wood Chuck.  I just have to get 
up there.  In the end it might save me a few bucks as long as all the gears are 
there etc. it appears there is a deep shelf above the machine maybe I luck out 
and there will be a circle deal up there.  The gent must have been in business, 
based off the stuff the is selling.  Might find more!  More to follow. 

 

On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

The only way you get good at something is to keep working at it. Biggest thing 
will be getting the square hole correctly. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

 

Foreston MN 56330 

 

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner mailto:chefswoodturn...@gmail.com> > wrote:

Bill, 

Great idea.  You asked the right question.  Yes I have tanks/ torch set and a 
Mig welder, can I weld well I kind have the idea.  My old neighbor gave me a 
crash course, a year or so ago.  So I think I can do it,  may not look pretty.  
I am home all week, I will break out my stuff tomorrow.  

 

Eric 

 

Sent from my iPad





On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au 
  wrote:



Do you have any welding skills one would not be that hard to make 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Eric Gantner
Sent: Thursday, 16 February 2023 11:22 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Eric 900

 

Tim if you have time please check for a handle?  

Sent from my iPad

 

On Feb 14, 2023, at 10:10 PM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



Hey Eric, 

 

I almost forgot to look to see if I had an extra handle, remind me tomorrow and 
I will check. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

 

Foreston MN 56330 

 

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley mailto:rghut...@gmail.com> > wrote:

I have a 900 too (with a handle) and I use Tim’s approach as well.

 

Rick

 

On Feb 14, 2023, at 21:48, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



Hey Eric,

 

It is slow but still cool you can do both. Many times I use my lathe to round 
them, sand,  then play on the LOM with 

all the decore. But over all it does a really good job. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

 

Foreston MN 56330 

 

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner mailto:chefswoodturn...@gmail.com> > wrote:

 I turned on my 900 today, and tried to make round stock.  Coming from a lathe 
I found it slow, but I am not sure if I was doing it right.  I was moving my 
sled with the crank and hand turning the wood, because I do not have a handle 
yet.  Anyway I am still learning so that is always fun!  







 

Sent from my iPad

 

On Feb 9, 2023, at 6:57 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



yup figured that our. Just had to go to the right pix. lol.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

 

Foreston MN 56330 

 

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 8, 2023 at 10:04 PM mailto:bulke...@mmnet.com.au> > wrote:

What they are is the name of each pic

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Thursday, 9 February 2023 2:29 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Eric 900

 

I don't see the names on them for him Bill? 




Kind Regards,

 

Timothy J. Ziegler

Re: Eric 900

[Eric Gantner]

You are right there.  So she took 500 for the Wood Chuck.  I just have to
get up there.  In the end it might save me a few bucks as long as all the
gears are there etc. it appears there is a deep shelf above the machine
maybe I luck out and there will be a circle deal up there.  The gent must
have been in business, based off the stuff the is selling.  Might find
more!  More to follow.

On Wed, Feb 15, 2023 at 10:56 PM Tim Ziegler  wrote:

> The only way you get good at something is to keep working at it. Biggest
> thing will be getting the square hole correctly.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> 
> Foreston MN 56330
> 
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Feb 15, 2023 at 7:18 PM Eric Gantner 
> wrote:
>
>> Bill,
>> Great idea.  You asked the right question.  Yes I have tanks/ torch set
>> and a Mig welder, can I weld well I kind have the idea.  My old neighbor
>> gave me a crash course, a year or so ago.  So I think I can do it,  may not
>> look pretty.  I am home all week, I will break out my stuff tomorrow.
>>
>> Eric
>>
>>
>> Sent from my iPad
>>
>> On Feb 15, 2023, at 8:03 PM, bulke...@mmnet.com.au wrote:
>>
>> 
>>
>> Do you have any welding skills one would not be that hard to make
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 16 February 2023 11:22 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> Tim if you have time please check for a handle?
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 14, 2023, at 10:10 PM, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> I almost forgot to look to see if I had an extra handle, remind me
>> tomorrow and I will check.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:59 PM Rick Hutley  wrote:
>>
>> I have a 900 too (with a handle) and I use Tim’s approach as well.
>>
>>
>>
>> Rick
>>
>>
>>
>> On Feb 14, 2023, at 21:48, Tim Ziegler  wrote:
>>
>> 
>>
>> Hey Eric,
>>
>>
>>
>> It is slow but still cool you can do both. Many times I use my lathe to
>> round them, sand,  then play on the LOM with
>>
>> all the decore. But over all it does a really good job.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Tue, Feb 14, 2023 at 8:12 PM Eric Gantner 
>> wrote:
>>
>>  I turned on my 900 today, and tried to make round stock.  Coming from a
>> lathe I found it slow, but I am not sure if I was doing it right.  I was
>> moving my sled with the crank and hand turning the wood, because I do not
>> have a handle yet.  Anyway I am still learning so that is always fun!
>>
>> 
>>
>> 
>>
>> 
>>
>>
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 9, 2023, at 6:57 AM, Tim Ziegler  wrote:
>>
>> 
>>
>> yup figured that our. Just had to go to the right pix. lol.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 8, 2023 at 10:04 PM  wrote:
>>
>> What they are is the name of each pic
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Thursday, 9 February 2023 2:29 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> I don't see the names on them for him Bill?
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> 
>>
>> Foreston MN 56330
>> 
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Feb 8, 2023 at 8:26 PM  wrote:
>>
>> Ok here are your pics