RE: log cutting

2023-03-15 Thread bulkeley 
They are sealed curt with cling wrap and wood sealer under that done as soon as 
they were cut

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, 16 March 2023 3:45 PM
To: Legacy Ornamental Mills 
Subject: Re: log cutting

 

Hey Bill

 

Make sure you seal the ends of the wood ASAP. that should help slow down the 
drying and make the wood more stable...

C.A.G.

On Wednesday, March 15, 2023 at 10:30:00 PM UTC-4 timjz...@gmail.com 
  wrote:

no problem was just conversation. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798   shop

320-630-2243   cell

 

On Wed, Mar 15, 2023 at 4:14 PM mailto:bulk...@mmnet.com.au> > wrote:

Ps sorry I don’t have a clue of board feet I haven’t even ran a tape over it 
yet 

 

Bill

 

From: legacy-orna...@googlegroups.com   
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Wednesday, 15 March 2023 10:25 PM
To: legacy-orna...@googlegroups.com  
Subject: Re: log cutting

 

Thats some nice looking material Bill. 

Any idea how many board Feet you harvested there? 

Are you slabbing it so it can dry faster? Here in the states an inch per year 

air dry is the average, then with it wrapped in plastic wrap you slow that

process down, so when do you think you might be able to start machining some of 
it?

Great looking material for sure. And yes Iron Wood cuts like it states like 
Iron. 

We have it here in Minnesota too, but have not seen an Iron wood Tree that 
large here. 

Nice finc.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798   shop

320-630-2243   cell

 

 

On Wed, Mar 15, 2023 at 12:22 AM mailto:bulk...@mmnet.com.au> > wrote:

Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
 .

To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d95783%24205676d0%2461036470%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/85f68777-3e02-4310-a028-f974e80f8d9fn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d957c8%2430f86080%2492e92180%24%40mmnet.com.au.

Re: log cutting

2023-03-15 Thread 'Curt George' via Legacy Ornamental Mills 
Hey Bill

Make sure you seal the ends of the wood ASAP. that should help slow down 
the drying and make the wood more stable...
C.A.G.

On Wednesday, March 15, 2023 at 10:30:00 PM UTC-4 timjz...@gmail.com wrote:

> no problem was just conversation. 
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 <(320)%20294-5798> shop
> 320-630-2243 <(320)%20630-2243> cell
>
> On Wed, Mar 15, 2023 at 4:14 PM  wrote:
>
>> Ps sorry I don’t have a clue of board feet I haven’t even ran a tape over 
>> it yet 
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* legacy-orna...@googlegroups.com  
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Wednesday, 15 March 2023 10:25 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: log cutting
>>
>>  
>>
>> Thats some nice looking material Bill. 
>>
>> Any idea how many board Feet you harvested there? 
>>
>> Are you slabbing it so it can dry faster? Here in the states an inch per 
>> year 
>>
>> air dry is the average, then with it wrapped in plastic wrap you slow that
>>
>> process down, so when do you think you might be able to start machining 
>> some of it?
>>
>> Great looking material for sure. And yes Iron Wood cuts like it states 
>> like Iron. 
>>
>> We have it here in Minnesota too, but have not seen an Iron wood Tree 
>> that large here. 
>>
>> Nice finc.
>>
>> Kind Regards,
>>
>>  
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>  
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>  
>>
>>  
>>
>> On Wed, Mar 15, 2023 at 12:22 AM  wrote:
>>
>> Spent the day cutting up a big tree down in the paddock it was hard as a 
>> rock to cut up
>>
>> videoed a few min of my son trying to cut it what a fun time to spend on 
>> my birthday today lol
>>
>> https://youtu.be/2guFeED-On4
>>
>>  
>>
>> Bill
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
>>  
>> 
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
>>  
>> 
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>>
> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d95783%24205676d0%2461036470%24%40mmnet.com.au
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/85f68777-3e02-4310-a028-f974e80f8d9fn%40googlegroups.com.

Re: Legacy Design Kit

2023-03-15 Thread Kelly Knight 
If someone has DWG or DXF files I can convert them into just about any
format that is needed. I use AutoCAD just about every day. If anyone wants
to send me the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
wrote:

> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
> >
> > and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > A bought my Design Kit from someone in our Group - and it did not have
> them.
> >
> > I'd sure like to get a copy - if possible.
> >
> >
> >
> > The other question I have:
> >
> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
> so, how'd they turn out and what was the cost?
> >
> >
> >
> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
> >
> > Mac
> >
> > 
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 13, 2023 5:27 PM
> > To: 
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
> >
> > Is for, maybe its just to keep the paper from getting creases in it ???
> >
> >
> >
> > Bill
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole Andrews
> > Sent: Tuesday, 14 March 2023 3:25 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > I might have some extra templates , when I bought mine they sent extra
> of some and none of the others , took awhile to get straight.
> >
> >
> >
> > On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
> >
> > To all "Google Legacy Group" members:
> >
> >
> >
> > Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
> >
> > One large blank sheet of plexiglass
> >
> > Three 50-page pads of 11" x 39" spindle layout graph paper
> >
> > Two -- square pads of 13" round layout paper
> >
> >
> >
> > Missing were:
> >
> > The three clear acrylic templates
> >
> > The 12 sample designs
> >
> > The "How-to-do" VHS Tape
> >
> >
> >
> > Question:
> >
> > If I provide the large paper, would one of the members be willing to
> copy the clear acrylic templates onto the paper?   From there I would make
> the templates.
> >
> >
> >
> > Also, if I provide the large paper, would one of the members be willing
> to copy the "sample Designs" onto the paper?  From there I would make the
> templates.
> >
> >
> >
> > Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS
> >
> > 
> > 
> > 
> >
> > tape?
> >
> >
> >
> > A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
> >
> >
> >
> > Nat
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups "Legacy Ornamental Mills" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> > To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googl

Re: Weekend project

2023-03-15 Thread Tim Ziegler 
Hey John,

Those can be used to make 4 pieces of moulding that the same time.
They are called Pilaster mounting Dogs.
Not sure if there is an archive that would have the information or not.
This link should open right to the description of it.

https://drive.google.com/a/legacywoodworking.com/file/d/1cPt4On2lR1eZwkxcBuQ7YseOQuJRdf5q/view?usp=drivesdk

but you attach 4 pieces to it and turn it just like you would a spindle and
when done you can have 4 exact same piece of moulding to but on a corner
application.
I'd send a pic but shut my phone down for the night.
Try this link its from the actually legacy site.
https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 7:28 PM John Von Brandt 
wrote:

> Tim, how are these used?
>
> On Sun, Mar 12, 2023, 5:14 PM Tim Ziegler  wrote:
>
>> looks like it works well.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Mar 12, 2023 at 4:15 PM 'Curt George' via Legacy Ornamental Mills
>>  wrote:
>>
>>> Here are some photo's of the hold down table and the Uni-strut
>>> equipment. (note: Uni-strut is a name brand, it is now sold as "supper
>>> strut", as well as a few other names.)
>>>
>>> C.A.G.
>>>
>>> On Sunday, March 12, 2023 at 05:09:02 PM EDT, 'Curt George' via Legacy
>>> Ornamental Mills  wrote:
>>>
>>>
>>> Hello  Again everyone.
>>> Just a few up-dates on this project.
>>> Here are a few new pix.
>>> NOTE: As a side part of this topic of Uni-strut. Home Depot and most of
>>> the big box
>>> stores sell it in the electrical isle. the stuff is easy to work with,
>>> strong and sells for a fair
>>> price.  Check it out.
>>> Once the glue is dry, all I need to do is clean up and true up the leg,
>>> and then I will be done.
>>> C.A.G.
>>>
>>> On Saturday, March 11, 2023 at 4:23:50 PM UTC-5 aussiman wrote:
>>>
>>> Great work curt bringing new life back into that poor old broken piece
>>> of wood
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>> legacy-orna...@googlegroups.com>
>>> *Sent:* Sunday, 12 March 2023 2:14 AM
>>> *To:* Legacy ornamental mills 
>>> *Subject:* Weekend project
>>>
>>>
>>>
>>> Hello Everyone.
>>>
>>>
>>>
>>> I was asked about different methods THAT  I like to use, to hold down
>>> wood on the Legacy when milling.
>>>
>>>
>>>
>>> Today's project is not done yet, but This question leads on to,  what I
>>> am working on now.
>>>
>>>
>>>
>>> A Friend on mine, asked me to repair a very special Martial art, Dummy
>>> leg that someone broke.
>>>
>>> It looks like this leg has been broken at least once before. there were
>>> screws  drilled into the wood, in an attempt to hold it together, which
>>> made things even worst, there are lots of cracks in this wood and it is no
>>> longer stable enough to do much with it.
>>>
>>> This is what I plan to do.
>>>
>>> I first glued the leg back together the best that I could, after the
>>> glue dried, I milled a 3/4"x 5"x 2.5" mortice for a spline in the back side
>>> of this leg, to hold it together.
>>>
>>> Then (And now) I am milling the edges of the leg flat, to glue some new
>>> wood onto the leg.
>>>
>>> My hope is to laminate this leg like a piece of plywood, where I will
>>> have 3 new pieces of wood re-supporting the original break.
>>>
>>> this leg will not be used much after repaired, It will be more or less a
>>> show piece, this leg is over 100 yrs old, and it has a lot of sentimental
>>> value to the owner.
>>>
>>>
>>>
>>> Now the hold down table that I like to use.
>>>
>>>
>>>
>>> My original table was OSB, today I use Uni-Strut channel instead of
>>> wood, But the method is still very much the same.
>>>
>>> I made some, what will be the arms/holding supports for this table, out
>>> of wood, and then set an old/broken bandsaw blade into this wood,  The
>>> teeth of the blade are what I use to hold the wood in place on my table.
>>>
>>> In the past I had the teeth running in the opposite direction, so the
>>> wood could not slip, Today I am not sure if this matters?  This hold down
>>> method has worked well for me for a long time. And I have not had any
>>> problem with this method so far. As you can see in these photo's the wood
>>> dose not have to be square in order to work on the mill.
>>>
>>> Here are a few photo's.
>>>
>>>
>>>
>>> Please let me know what you think?  I will letter show this Martial art
>>> leg once it is completed. (most likely, Monday.)
>>>
>>>
>>>
>>> I Have to get to work now, talk to you all more when I get home tonight.
>>>
>>> Have a good day.
>>>
>>>
>>>
>>> C.A.G.
>>>
>>> --
>>>
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and

Re: log cutting

2023-03-15 Thread Tim Ziegler 
no problem was just conversation.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 4:14 PM  wrote:

> Ps sorry I don’t have a clue of board feet I haven’t even ran a tape over
> it yet
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 March 2023 10:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: log cutting
>
>
>
> Thats some nice looking material Bill.
>
> Any idea how many board Feet you harvested there?
>
> Are you slabbing it so it can dry faster? Here in the states an inch per
> year
>
> air dry is the average, then with it wrapped in plastic wrap you slow that
>
> process down, so when do you think you might be able to start machining
> some of it?
>
> Great looking material for sure. And yes Iron Wood cuts like it states
> like Iron.
>
> We have it here in Minnesota too, but have not seen an Iron wood Tree that
> large here.
>
> Nice finc.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Mar 15, 2023 at 12:22 AM  wrote:
>
> Spent the day cutting up a big tree down in the paddock it was hard as a
> rock to cut up
>
> videoed a few min of my son trying to cut it what a fun time to spend on
> my birthday today lol
>
> https://youtu.be/2guFeED-On4
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d95783%24205676d0%2461036470%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqHRBW%2BnzmM3t18FvTiMZ5USehOv5AyF3P4j1foakyag%40mail.gmail.com.

RE: log cutting

2023-03-15 Thread bulkeley 
Yea I thought so 😊

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 16 March 2023 8:08 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: log cutting

 

Yup all sounds good to me Bill.

Awesome Birthday Present too. lol


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Mar 15, 2023 at 3:54 PM mailto:bulke...@mmnet.com.au> > wrote:

My first thing I want to try to make is a 15 or 16 inch vase so I will probably 
cut and rough out a blank for that and wrap that up

To dry  after that I don’t have a clue for the rest  lol I got lots of time 
ideas will come to me. I didn’t plan anything the tree just presented it self 
to me you know what its like grab the free wood and figger out what to use it 
for later lol 😊

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Wednesday, 15 March 2023 10:25 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: log cutting

 

Thats some nice looking material Bill. 

Any idea how many board Feet you harvested there? 

Are you slabbing it so it can dry faster? Here in the states an inch per year 

air dry is the average, then with it wrapped in plastic wrap you slow that

process down, so when do you think you might be able to start machining some of 
it?

Great looking material for sure. And yes Iron Wood cuts like it states like 
Iron. 

We have it here in Minnesota too, but have not seen an Iron wood Tree that 
large here. 

Nice finc.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Mar 15, 2023 at 12:22 AM mailto:bulke...@mmnet.com.au> > wrote:

Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d95780%245d73f090%24185bd1b0%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFu-LRgaR-CutR099pPxZ30rfKCOat-H5MjCgdTzvvBAw%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr.

RE: log cutting

2023-03-15 Thread bulkeley 
Ps sorry I don’t have a clue of board feet I haven’t even ran a tape over it 
yet 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, 15 March 2023 10:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: log cutting

 

Thats some nice looking material Bill. 

Any idea how many board Feet you harvested there? 

Are you slabbing it so it can dry faster? Here in the states an inch per year 

air dry is the average, then with it wrapped in plastic wrap you slow that

process down, so when do you think you might be able to start machining some of 
it?

Great looking material for sure. And yes Iron Wood cuts like it states like 
Iron. 

We have it here in Minnesota too, but have not seen an Iron wood Tree that 
large here. 

Nice finc.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Mar 15, 2023 at 12:22 AM mailto:bulke...@mmnet.com.au> > wrote:

Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d95783%24205676d0%2461036470%24%40mmnet.com.au.

RE: log cutting

2023-03-15 Thread bulkeley 
Yes the poor saw was struggling and the was a newly sharpened blade too 
,interesting about the war ship 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Joseph Greenleaf
Sent: Thursday, 16 March 2023 12:14 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: log cutting

 

That’s quite a tree. It looked like the saw was struggling. 

There’s a U.S. Navy squared-rigged wooden warship, hundreds of years old, 
moored in Boston Harbor. She is the USS Constitution but her nickname is “Old 
Ironsides.” Cannonballs from our English friends bounced off her timber sides 
and the sailors gave her that nickname. 

Your wood would laugh at mere cannonballs. 

 

Joe G. 

 

On Wed, Mar 15, 2023 at 1:22 AM mailto:bulke...@mmnet.com.au> > wrote:

Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
 

 .

-- 

Joseph Greenleaf 
solastob...@gmail.com  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CALhOGXh-ppT_dAQo%3DBjZ3PPGcUyRtbhFGaK0QZ%2BWaH2zzHE%3DnA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d95782%249c9adca0%24d5d095e0%24%40mmnet.com.au.

RE: log cutting

2023-03-15 Thread bulkeley 
I don’t know what I’m going to do yet curt but to be sure I will try and get as 
much as I can out of it buy first off it’s a nice opportunity to get a couple 
of nice big blanks

I might try and get a bit more if the rest of the tree doesn’t crack too much 
before I can con my son into cutting more for me

A bit hard to work a chainsaw from a scooter myself lol

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Wednesday, 15 March 2023 11:30 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: log cutting

 

Happy Birthday Bill.

Nice Video.

 

How dose that wood split? You might reeve one or two of those to make some 
smaller turning stock.

When I process my own wood, I always try to reeve the wood into smaller blanks 
for me to turn. (I have some black walnut and hard maple in my rafters drying 
now for appx. 1 yr/2yrs now.)   

Your iron wood looks like it has some color...  Nice stuff.I cant wait to 
see how it turns.

Have a GREAT DAY...

 

C.A.G.

 

On Wednesday, March 15, 2023 at 01:22:16 AM EDT, bulke...@mmnet.com.au 
  mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1543020223.214504.1678883381034%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d95782%2430b36b10%24921a4130%24%40mmnet.com.au.

Re: log cutting

2023-03-15 Thread Tim Ziegler 
Yup all sounds good to me Bill.
Awesome Birthday Present too. lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 3:54 PM  wrote:

> My first thing I want to try to make is a 15 or 16 inch vase so I will
> probably cut and rough out a blank for that and wrap that up
>
> To dry  after that I don’t have a clue for the rest  lol I got lots of
> time ideas will come to me. I didn’t plan anything the tree just presented
> it self to me you know what its like grab the free wood and figger out what
> to use it for later lol 😊
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 March 2023 10:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: log cutting
>
>
>
> Thats some nice looking material Bill.
>
> Any idea how many board Feet you harvested there?
>
> Are you slabbing it so it can dry faster? Here in the states an inch per
> year
>
> air dry is the average, then with it wrapped in plastic wrap you slow that
>
> process down, so when do you think you might be able to start machining
> some of it?
>
> Great looking material for sure. And yes Iron Wood cuts like it states
> like Iron.
>
> We have it here in Minnesota too, but have not seen an Iron wood Tree that
> large here.
>
> Nice finc.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Mar 15, 2023 at 12:22 AM  wrote:
>
> Spent the day cutting up a big tree down in the paddock it was hard as a
> rock to cut up
>
> videoed a few min of my son trying to cut it what a fun time to spend on
> my birthday today lol
>
> https://youtu.be/2guFeED-On4
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d95780%245d73f090%24185bd1b0%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFu-LRgaR-CutR099pPxZ30rfKCOat-H5MjCgdTzvvBAw%40mail.gmail.com.

RE: log cutting

2023-03-15 Thread bulkeley 
My first thing I want to try to make is a 15 or 16 inch vase so I will probably 
cut and rough out a blank for that and wrap that up

To dry  after that I don’t have a clue for the rest  lol I got lots of time 
ideas will come to me. I didn’t plan anything the tree just presented it self 
to me you know what its like grab the free wood and figger out what to use it 
for later lol 😊

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, 15 March 2023 10:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: log cutting

 

Thats some nice looking material Bill. 

Any idea how many board Feet you harvested there? 

Are you slabbing it so it can dry faster? Here in the states an inch per year 

air dry is the average, then with it wrapped in plastic wrap you slow that

process down, so when do you think you might be able to start machining some of 
it?

Great looking material for sure. And yes Iron Wood cuts like it states like 
Iron. 

We have it here in Minnesota too, but have not seen an Iron wood Tree that 
large here. 

Nice finc.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Mar 15, 2023 at 12:22 AM mailto:bulke...@mmnet.com.au> > wrote:

Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

 

Bill

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d95780%245d73f090%24185bd1b0%24%40mmnet.com.au.

Re: Legacy Design Kit

2023-03-15 Thread jrig...@gmail.com 
Cole,
Would you email me a copy also?

Thank you,
Jim Riggen
jrigge...@gmail.com




On Wednesday, March 15, 2023 at 6:54:09 AM UTC-5 Cole Andrews wrote:

> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed? If they 
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is colean...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulk...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-orna...@googlegroups.com  
> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-orna...@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
> >
> > and it lists the components. Nowhere in that list is any mention of a 
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not 
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
> >
> > A bought my Design Kit from someone in our Group - and it did not have 
> them.
> >
> > I'd sure like to get a copy - if possible.
> >
> >
> >
> > The other question I have:
> >
> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or 
> both) to a copy shop, like Staples, FedEx, etc. and had copies made? If so, 
> how'd they turn out and what was the cost?
> >
> >
> >
> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
> >
> > Mac
> >
> > 
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 13, 2023 5:27 PM
> > To: 
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I 
> still don’t know what the large blank sheet of plexiglass
> >
> > Is for, maybe its just to keep the paper from getting creases in it ???
> >
> >
> >
> > Bill
> >
> >
> >
> > From: legacy-orna...@googlegroups.com  
> On Behalf Of Cole Andrews
> > Sent: Tuesday, 14 March 2023 3:25 AM
> > To: legacy-orna...@googlegroups.com
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > I might have some extra templates , when I bought mine they sent extra 
> of some and none of the others , took awhile to get straight.
> >
> >
> >
> > On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon  
> wrote:
> >
> > To all "Google Legacy Group" members:
> >
> >
> >
> > Included in a recent purchase was a box labeled "Design Kit". The kit 
> only contained:
> >
> > One large blank sheet of plexiglass
> >
> > Three 50-page pads of 11" x 39" spindle layout graph paper
> >
> > Two -- square pads of 13" round layout paper
> >
> >
> >
> > Missing were:
> >
> > The three clear acrylic templates
> >
> > The 12 sample designs
> >
> > The "How-to-do" VHS Tape
> >
> >
> >
> > Question:
> >
> > If I provide the large paper, would one of the members be willing to 
> copy the clear acrylic templates onto the paper? From there I would make 
> the templates.
> >
> >
> >
> > Also, if I provide the large paper, would one of the members be willing 
> to copy the "sample Designs" onto the paper? From there I would make the 
> templates.
> >
> >
> >
> > Lastly, would one of the members be willing to send me their VHS tape to 
> copy and return their VHS
> >
> > 
> > 
> > 
> >
> > tape?
> >
> >
> >
> > A word Doc showing the Legacy "Design Kit" information in the Legacy 
> instruction manual is attached.
> >
> >
> >
> > Nat
> >
> > --
> > You received this message because you are subscribed to the Google 
> Groups "Legacy Ornamental Mills" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an email to legacy-ornamental...@googlegroups.com.
> > To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
> .
> >
> > --
> > You received this message because you are subscribed to the Google 
> Groups "Legacy Ornamental Mills" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an

Re: log cutting

2023-03-15 Thread Joseph Greenleaf 
That’s quite a tree. It looked like the saw was struggling.
There’s a U.S. Navy squared-rigged wooden warship, hundreds of years old,
moored in Boston Harbor. She is the USS Constitution but her nickname is
“Old Ironsides.” Cannonballs from our English friends bounced off her
timber sides and the sailors gave her that nickname.
Your wood would laugh at mere cannonballs.

Joe G.

On Wed, Mar 15, 2023 at 1:22 AM  wrote:

> Spent the day cutting up a big tree down in the paddock it was hard as a
> rock to cut up
>
> videoed a few min of my son trying to cut it what a fun time to spend on
> my birthday today lol
>
> https://youtu.be/2guFeED-On4
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
> 
> .
>
-- 
Joseph Greenleaf
solastob...@gmail.com

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CALhOGXh-ppT_dAQo%3DBjZ3PPGcUyRtbhFGaK0QZ%2BWaH2zzHE%3DnA%40mail.gmail.com.

Re: log cutting

2023-03-15 Thread 'Curt George' via Legacy Ornamental Mills 
 Happy Birthday Bill.
Nice Video.
How dose that wood split? You might reeve one or two of those to make some 
smaller turning stock.When I process my own wood, I always try to reeve the 
wood into smaller blanks for me to turn. (I have some black walnut and hard 
maple in my rafters drying now for appx. 1 yr/2yrs now.)   Your iron wood looks 
like it has some color...  Nice stuff.    I cant wait to see how it turns.Have 
a GREAT DAY...
C.A.G.
On Wednesday, March 15, 2023 at 01:22:16 AM EDT, bulke...@mmnet.com.au 
 wrote:  
 
 
Spent the day cutting up a big tree down in the paddock it was hard as a rock 
to cut up

videoed a few min of my son trying to cut it what a fun time to spend on my 
birthday today lol

https://youtu.be/2guFeED-On4

  

Bill
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1543020223.214504.1678883381034%40mail.yahoo.com.

Re: Legacy Design Kit

2023-03-15 Thread Cole Andrews 
i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
>
> 
> 
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I still 
> don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of Cole Andrews
> Sent: Tuesday, 14 March 2023 3:25 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of 
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon  wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit only 
> contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy the 
> clear acrylic templates onto the paper?   From there I would make the 
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to 
> copy the "sample Designs" onto the paper?  From there I would make the 
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to copy 
> and return their VHS
>
> 
> 
> 
>
> tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy 
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com.
>
> --
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9Br3ruhnGE2U-yWrhcUcqCWcwZCivt-pbs91h6tLSOqKQ%40mail.gmail.com.
>
>
>
> --
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to

Re: log cutting

2023-03-15 Thread Tim Ziegler 
Thats some nice looking material Bill.
Any idea how many board Feet you harvested there?
Are you slabbing it so it can dry faster? Here in the states an inch per
year
air dry is the average, then with it wrapped in plastic wrap you slow that
process down, so when do you think you might be able to start machining
some of it?
Great looking material for sure. And yes Iron Wood cuts like it states like
Iron.
We have it here in Minnesota too, but have not seen an Iron wood Tree that
large here.
Nice finc.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 12:22 AM  wrote:

> Spent the day cutting up a big tree down in the paddock it was hard as a
> rock to cut up
>
> videoed a few min of my son trying to cut it what a fun time to spend on
> my birthday today lol
>
> https://youtu.be/2guFeED-On4
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFboSGyS1LMuL5ARTPWBwxAfPSPP8XMOF19ZEcEe_b7bA%40mail.gmail.com.

Re: log cutting

2023-03-15 Thread Tim Ziegler 
Hey Happy Birthday Bill,

Hope you had a great day!
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 12:22 AM  wrote:

> Spent the day cutting up a big tree down in the paddock it was hard as a
> rock to cut up
>
> videoed a few min of my son trying to cut it what a fun time to spend on
> my birthday today lol
>
> https://youtu.be/2guFeED-On4
>
>
>
> Bill
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d956fe%2408e61a80%241ab24f80%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG2Q2xvqo%3D1s7rP8H7L97XU0h5WdFuE%2BZ07F2DdP0WrcQ%40mail.gmail.com.