RE: Selling my barely used LOM 1200

[bulkeley]

A very reasonable price if I was not so far away in Australia I would buy it 
but the shipping costs would be in the thousands 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Vadim Sidelnikov
Sent: Thursday, June 8, 2023 3:41 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Selling my barely used LOM 1200

 

Hey ya'll, I've decided to sell my LOM 1200 as it is taking up a lot of 
valuable real estate in my small shop. 

 

I first got it in about February 2022. It had never been assembled and was in 
original boxes. I assembled it in about October 2022 and have used it a few 
times, flattening some small slabs, making some spindles and rolling pins, and 
that's about it. It is simply not getting enough use for my small shop. 

 

Here's a link to a few photos: https://imgur.com/a/LIXn5fs

 

Here's a general list of everything it comes with, plus more:

 

* drive gears 

ostandard duplex gear

o0.25 duplex gear

o2X Duplex gear 

* Index Gears

oStandard gear

o2x index gear

* Rotary Indexing Table

* Rotary Indexing Shaft

* Standard carrier tray 

* Z-Axis Carriage Assembly

* X-axis Drive Shaft Handle

* Spindle Shaft Handle

* Headstock Drive Center

* Mounting Hubs x 4

* Dust Control Bag

* Right and left-hand spiral drive gears

* double-locking collar

* split nuts x 2

* bag of spare parts – L1200

* Support plates for raising up and down - (supposed to be 2 sets of 
each – screw support plate and threaded nut plate, but mine came with 3 support 
plates and only 1 threaded nut plate. I planned to make out of HDPE but haven’t 
gotten to it. I’ll throw in The ACME 5/8-4 right-hand thread tap I already got 
for this $30 value). 

* Router bits – 18, most never used, can provide list.

* Porter Cable 3 ¼ HP Router  

The part names are all from the manual available on Legacy Woodworking website: 
 
https://drive.google.com/a/legacywoodworking.com/file/d/1M2eAZDsFz8JK70famI7Ozs_5iSjghKy5/view?usp=drivesdk,
 so you can download the manual and do a search for each specific part name, if 
you want. 

 

Price: $1000+shipping (or come pick it up)

FOB Alameda, California 94501

 

If you're interested or have additional questions/need additional pictures, let 
me know. I have not yet listed it on eBay or craigslist or reached out to any 
of my local woodworking groups since I wanted to give you all a first chance at 
it if you want it. 

 

- Vadim

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8reB1nZQ0mTYO8HHo8ReoT4nX2oqPh1imtesHJt37NaT8w%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002901d3%24f0d01030%24d2703090%24%40mmnet.com.au.

Re: Selling my barely used LOM 1200

[Jeff Richmond]

Hi Vadim, I am sorry to hear that you are not getting enough use out of the mill but you have come to the right group of people that have the interests to do so. From my perspective, its best to keep the main machine together at that price verses parting it all out into pieces / parts but you may consider selling off some of the optional accessories separately as they are truly independent items.I myself would not mind the rotary indexing shaft or the dust control bag if you are willing to go that route. Thanks for reaching out to the group. Jeff from Connecticutjtrichmo...@gmail.comSent from my iPhoneOn Jun 7, 2023, at 1:41 PM, Vadim Sidelnikov  wrote:Hey ya'll, I've decided to sell my LOM 1200 as it is taking up a lot of valuable real estate in my small shop. I first got it in about February 2022. It had never been assembled and was in original boxes. I assembled it in about October 2022 and have used it a few times, flattening some small slabs, making some spindles and rolling pins, and that's about it. It is simply not getting enough use for my small shop. Here's a link to a few photos: https://imgur.com/a/LIXn5fsHere's a general list of everything it comes with, plus more:·
drive gears 

o   
standard duplex gear

o   
0.25 duplex gear

o   
2X Duplex gear 

·
Index Gears

o   
Standard gear

o   
2x index gear

·
Rotary Indexing Table

·
Rotary Indexing Shaft

·
Standard carrier tray 

·
Z-Axis Carriage Assembly

·
X-axis Drive Shaft Handle

·
Spindle Shaft Handle

·
Headstock Drive Center

·
Mounting Hubs x 4· Dust Control Bag

·
Right and left-hand spiral drive gears

·
double-locking collar

·
split nuts x 2

·
bag of spare parts – L1200

·
Support plates for raising up and down - (supposed
to be 2 sets of each – screw support plate and threaded nut plate, but mine
came with 3 support plates and only 1 threaded nut plate. I planned to make out
of HDPE but haven’t gotten to it. I’ll throw in The ACME 5/8-4 right-hand
thread tap I already got for this $30 value). 

·
Router bits – 18, most never used, can
provide list.

·
Porter Cable 3 ¼ HP Router  The part names are all from the manual available on Legacy Woodworking website:  https://drive.google.com/a/legacywoodworking.com/file/d/1M2eAZDsFz8JK70famI7Ozs_5iSjghKy5/view?usp=drivesdk, so you can download the manual and do a search for each specific part name, if you want. Price: $1000+shipping (or come pick it up)FOB Alameda, California 94501If you're interested or have additional questions/need additional pictures, let me know. I have not yet listed it on eBay or craigslist or reached out to any of my local woodworking groups since I wanted to give you all a first chance at it if you want it. - Vadim



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8reB1nZQ0mTYO8HHo8ReoT4nX2oqPh1imtesHJt37NaT8w%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/DC1E7BF1-FD3A-4443-9527-2C2179C136DC%40gmail.com.

Re: Selling my barely used LOM 1200

[Tim Ziegler]

Excellent pix too Vadim.
Thanks I wish I was in the market for another mill.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Jun 7, 2023 at 12:41 PM Vadim Sidelnikov 
wrote:

> Hey ya'll, I've decided to sell my LOM 1200 as it is taking up a lot of
> valuable real estate in my small shop.
>
> I first got it in about February 2022. It had never been assembled and was
> in original boxes. I assembled it in about October 2022 and have used it a
> few times, flattening some small slabs, making some spindles and rolling
> pins, and that's about it. It is simply not getting enough use for my small
> shop.
>
> Here's a link to a few photos: https://imgur.com/a/LIXn5fs
>
> Here's a general list of everything it comes with, plus more:
>
> · drive gears
>
> ostandard duplex gear
>
> o0.25 duplex gear
>
> o2X Duplex gear
>
> · Index Gears
>
> oStandard gear
>
> o2x index gear
>
> · Rotary Indexing Table
>
> · Rotary Indexing Shaft
>
> · Standard carrier tray
>
> · Z-Axis Carriage Assembly
>
> · X-axis Drive Shaft Handle
>
> · Spindle Shaft Handle
>
> · Headstock Drive Center
>
> · Mounting Hubs x 4
>
> · Dust Control Bag
>
> · Right and left-hand spiral drive gears
>
> · double-locking collar
>
> · split nuts x 2
>
> · bag of spare parts – L1200
>
> · Support plates for raising up and down - (supposed to be 2 sets
> of each – screw support plate and threaded nut plate, but mine came with 3
> support plates and only 1 threaded nut plate. I planned to make out of HDPE
> but haven’t gotten to it. I’ll throw in The ACME 5/8-4 right-hand thread
> tap I already got for this $30 value).
>
> · Router bits – 18, most never used, can provide list.
>
> · Porter Cable 3 ¼ HP Router
> The part names are all from the manual available on Legacy Woodworking
> website:
> https://drive.google.com/a/legacywoodworking.com/file/d/1M2eAZDsFz8JK70famI7Ozs_5iSjghKy5/view?usp=drivesdk,
> so you can download the manual and do a search for each specific part name,
> if you want.
>
> *Price*: $1000+shipping (or come pick it up)
> FOB Alameda, California 94501
>
> If you're interested or have additional questions/need additional
> pictures, let me know. I have not yet listed it on eBay or craigslist or
> reached out to any of my local woodworking groups since I wanted to give
> you all a first chance at it if you want it.
>
> - Vadim
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8reB1nZQ0mTYO8HHo8ReoT4nX2oqPh1imtesHJt37NaT8w%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG6UG8wOo3eEXq2%2BgwOdFgQv86AHa4knNMkFUVVfRbkfg%40mail.gmail.com.

Re: Selling my barely used LOM 1200

[Tim Ziegler]

Hey Vadim,

so sorry you are letting it go. Have you been following the Forum to get
idea's of what to make on it?
Chatting with some of the regulars can really help stimulate the creative
side in a guy.
I know they take up space but...
Wish you were a little closer before you let it go, it would be fun to make
some things that may help change
your mind.
But keep us posted will be sorry to see you go.
Talk soon thanks Vadim.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Jun 7, 2023 at 12:41 PM Vadim Sidelnikov 
wrote:

> Hey ya'll, I've decided to sell my LOM 1200 as it is taking up a lot of
> valuable real estate in my small shop.
>
> I first got it in about February 2022. It had never been assembled and was
> in original boxes. I assembled it in about October 2022 and have used it a
> few times, flattening some small slabs, making some spindles and rolling
> pins, and that's about it. It is simply not getting enough use for my small
> shop.
>
> Here's a link to a few photos: https://imgur.com/a/LIXn5fs
>
> Here's a general list of everything it comes with, plus more:
>
> · drive gears
>
> ostandard duplex gear
>
> o0.25 duplex gear
>
> o2X Duplex gear
>
> · Index Gears
>
> oStandard gear
>
> o2x index gear
>
> · Rotary Indexing Table
>
> · Rotary Indexing Shaft
>
> · Standard carrier tray
>
> · Z-Axis Carriage Assembly
>
> · X-axis Drive Shaft Handle
>
> · Spindle Shaft Handle
>
> · Headstock Drive Center
>
> · Mounting Hubs x 4
>
> · Dust Control Bag
>
> · Right and left-hand spiral drive gears
>
> · double-locking collar
>
> · split nuts x 2
>
> · bag of spare parts – L1200
>
> · Support plates for raising up and down - (supposed to be 2 sets
> of each – screw support plate and threaded nut plate, but mine came with 3
> support plates and only 1 threaded nut plate. I planned to make out of HDPE
> but haven’t gotten to it. I’ll throw in The ACME 5/8-4 right-hand thread
> tap I already got for this $30 value).
>
> · Router bits – 18, most never used, can provide list.
>
> · Porter Cable 3 ¼ HP Router
> The part names are all from the manual available on Legacy Woodworking
> website:
> https://drive.google.com/a/legacywoodworking.com/file/d/1M2eAZDsFz8JK70famI7Ozs_5iSjghKy5/view?usp=drivesdk,
> so you can download the manual and do a search for each specific part name,
> if you want.
>
> *Price*: $1000+shipping (or come pick it up)
> FOB Alameda, California 94501
>
> If you're interested or have additional questions/need additional
> pictures, let me know. I have not yet listed it on eBay or craigslist or
> reached out to any of my local woodworking groups since I wanted to give
> you all a first chance at it if you want it.
>
> - Vadim
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8reB1nZQ0mTYO8HHo8ReoT4nX2oqPh1imtesHJt37NaT8w%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFbFOLrHffMesznSa_isMwgYGGrd%2Bj7kMpBHbtLxovkWg%40mail.gmail.com.

Selling my barely used LOM 1200

[Vadim Sidelnikov]

Hey ya'll, I've decided to sell my LOM 1200 as it is taking up a lot of
valuable real estate in my small shop.

I first got it in about February 2022. It had never been assembled and was
in original boxes. I assembled it in about October 2022 and have used it a
few times, flattening some small slabs, making some spindles and rolling
pins, and that's about it. It is simply not getting enough use for my small
shop.

Here's a link to a few photos: https://imgur.com/a/LIXn5fs

Here's a general list of everything it comes with, plus more:

· drive gears

ostandard duplex gear

o0.25 duplex gear

o2X Duplex gear

· Index Gears

oStandard gear

o2x index gear

· Rotary Indexing Table

· Rotary Indexing Shaft

· Standard carrier tray

· Z-Axis Carriage Assembly

· X-axis Drive Shaft Handle

· Spindle Shaft Handle

· Headstock Drive Center

· Mounting Hubs x 4

· Dust Control Bag

· Right and left-hand spiral drive gears

· double-locking collar

· split nuts x 2

· bag of spare parts – L1200

· Support plates for raising up and down - (supposed to be 2 sets
of each – screw support plate and threaded nut plate, but mine came with 3
support plates and only 1 threaded nut plate. I planned to make out of HDPE
but haven’t gotten to it. I’ll throw in The ACME 5/8-4 right-hand thread
tap I already got for this $30 value).

· Router bits – 18, most never used, can provide list.

· Porter Cable 3 ¼ HP Router
The part names are all from the manual available on Legacy Woodworking
website:
https://drive.google.com/a/legacywoodworking.com/file/d/1M2eAZDsFz8JK70famI7Ozs_5iSjghKy5/view?usp=drivesdk,
so you can download the manual and do a search for each specific part name,
if you want.

*Price*: $1000+shipping (or come pick it up)
FOB Alameda, California 94501

If you're interested or have additional questions/need additional pictures,
let me know. I have not yet listed it on eBay or craigslist or reached out
to any of my local woodworking groups since I wanted to give you all a
first chance at it if you want it.

- Vadim

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAG3S8reB1nZQ0mTYO8HHo8ReoT4nX2oqPh1imtesHJt37NaT8w%40mail.gmail.com.