Re: Technique for Turning large pieces of wood on the Legacy

[Paul Richmond]

I use my legacy to round out turning blanks all the time.  WAY less 
scary and faster too.


Paul

On 6/10/20 10:27 PM, 'Curt George' via Legacy Ornamental Mills wrote:

Hello Everyone.

I was talking to a friend on mine about turning large pieces of wood 
on the lathe.  If the wood is not balanced correctly it can be very 
scary,   I told him I use my Legacy to turn large wood turnings, the 
slow speed is great for maintaining balance, since the router is what 
is moving fast not the wood.


When I turn large spindles that are not balanced, I use the Legacy in 
a planing mode.
I lock the router depth of cut to the lowest point on the spindle, and 
then use the Y axis to control the depth of cut.


 I mount the wood, between centers using the gears to turn the wood, I 
use the gears in this case more for indexing then I would do for 
turning.  I turn the wood, a small amount of rotation,( lets say 1/8" 
rotation,) then I plane the router over the wood,(form end to end of 
the wood) and then index the wood again.
I start with the Y axis as far off center as I can, then after every 
index, I move the Y axis closer to the center.(adjusting the depth of 
cut.)


  Using this type of cutting is much faster and safer, then turning as 
a lathe would, if I hit a thick area that I can not plane through, I 
then I just back off the depth of cut (Y axis), taking a smaller bite 
form the wood, repeating this process until I have the woods diameter 
uniform. Once the spindle is round, it can be turned more easily on 
either the Legacy or Lathe with out the fear of throwing the wood or 
bogging down your router,with large cuts.


Just a quick thought of turning process's/ techniques.

I have used this technique for turning any large spindle, form 
3"-10".  I just cut a 6" spindle yesterday using this method, Its 
never given me any problems.  Small/light cuts over and over... is 
much safer then hogging off thick cut of wood.

Its easier on your nerves, and your machine.  ;-)

If you like I can make a video of this process? its not very exciting, 
but it is a much safer method then just trying to turn a large piece 
of wood.
Have a good day/night. (its 1:30 am, now. So for me its good night.) 
Talk to you all tomorrow.

C.A.G.
--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1518951606.1823500.1591853263927%40mail.yahoo.com 
.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/58bea07e-05bc-1b65-eacf-762c285b6c7f%40gmail.com.

Re: New steady rest for the Legacy

[Paul Richmond]

I’ve often thought of making a thin stock support that attaches to the
carriage as a “follower” rather than the fixed position solutions.  Would
be a good bit tricky but might work better for long spindles

Paul

On Sat, Mar 14, 2020 at 2:08 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone.  (I hope everyone is well? With this Virus going around,
> Our WORLD is going Crazy.)
>
> Today's project is a re-make of the Legacy Thin support rest.
> My old one is made out of wood, and has served me well over the years. But
> I think its time to put the old steady to rest. ;-p
> Yesterday I found a place that sells Plastic's and an affordable prices,
> so I bought some...
>
> They say that "The Lathe is the Only machine that can re-produce its
> self"  "Well" the Legacy just might be able to also clam the same thing. ;-)
>
> Today I used the Legacy to make these plastic parts,
> The Uni-sturt is the 5/8" (thin stock.)  I made the brackets to mount to
> the Legacy, This steady rest is easy to make and even simpler to use.
>
> Please let me know what you think?
>
> Take care everyone. And stay WELL.
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/93722123.3278694.1584220120951%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D6xumCWOv2Z%3Dnp7EeEGQdT2sD%2B39pcHH0WK5_A_4OZXfw%40mail.gmail.com.

Re: Legacy hold down project

[Paul Richmond]

Very clever.  I think I like it.  I have a lot of rough saw stock that
needs a flat side before I take it to the planer.  This looks to be perfect
for the job.  Well done!

On Sat, Mar 7, 2020 at 1:51 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

>
>
> Hello again everyone, here is part two of My Legacy hold down idea.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/886c7462-ca7f-414c-bc08-2df62fb6d063%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D5a2Zh3onJwmPnJdgdzZuEFysD7ypx41TxJfYxbjOxbOg%40mail.gmail.com.

Re: New adjustable off set chuck

[Paul Richmond]

I don’t know, it looks like it would wobble a lot to me.嵐藍

On Sat, Feb 15, 2020 at 2:19 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> A new toy! ;-)
>
> I picked up an OLD jam chuck,(parts were missing so I picked it up for
> $10.00/Scrap metal prices.)  went out and bought a 1 3/4" ball hitch for a
> truck ($8.00), turned the threaded shaft of the ball hitch to 5/8" and add
> the Shop Smith face plate.
>
> It can be used on both the Shop Smith and the Legacy, The 5/8" shaft can
> fit any of my SS parts, (including the Legacy adapters that I have made.)
> So this chuck can be used of either or both machines.
> I think its pretty neat.
>
> Please let me know what you think?
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/2053674244.2523838.1581805181828%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D5ZVpDPERAy3_0JVNVrBfX1EjyCOthYZ0D0vphdVyFJJw%40mail.gmail.com.

Re: LOM 900 on eBay in Long Beach, California

[Paul Richmond]

Looks like it might be missing a tail stock as well.  The real question is
whether the rest of the goodies are with it.

Paul

On Mon, Feb 3, 2020 at 3:19 PM  wrote:

> Also not working it from underneath I don’t think this guy knows much
> about the legacys and no crakes about upside down and how it would look
> down under mac  not a bad price but if all the gears are with it.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *MWF
> *Sent:* Tuesday, 4 February 2020 3:37 AM
> *To:* Legacy Goog Group 
> *Subject:* LOM 900 on eBay in Long Beach, California
>
>
>
> Here's one I have not seen posted before:
>
>
>
> https://www.ebay.com/itm/333503407372?ul_noapp=true
>
>
>
> For a little bit of humor:
>
> I'm guessing the owner never figured out that the Mill works MUCH better
> when placed in the Horizontal mode.
>
> That may be why they are selling it - frustrated from trying to keep it
> standing up when running.
>
>
>
> Mac
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/94115509.3448.1580747843519%40wamui-abby.atl.sa.earthlink.net
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d5dae8%244de85fc0%24e9b91f40%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D7etM%2B6LCEQb-yP5QxZ8Qgsiqoh4jfeNEEbPv7ujrChdw%40mail.gmail.com.

Re: Fw: Introducing MY Legacy 2020

[Paul Richmond]

It’s alive, it’s alive, Frankenmachine lives!浪浪

Very credible!  I would imagine that the linear rails, at lease the x-axis
ones, greatly increases the rigidity of the machine.  Why did you place the
router out so far from the z-axis?  Does it have enough rigidity to produce
accurate work?

By all means share the build process photos.  I’m sure that there’s a
number of us interested.

Any thoughts on changing up to ball screws and adding some servos ans going
for the full CNC effect?

Best regards,

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D6WvUoapktNPp7FDt7kLWHhQ17gW7Us_of2gKDGbnO9jw%40mail.gmail.com.

Re: Looking for a new self stick tape measure for my Legacy

[Paul Richmond]

Check Fastcap.com, leevalley.com, or perhaps rockier.

Paul

>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D6i1yUJFK6CakfQCCacHDQM6h3_Lxj%3DYRP%3DMJE-6Hxxhw%40mail.gmail.com.

Re: Legacy assembly manuals

[Paul Richmond]

Tim, I don’t understand the “authorization” issue.  None of the material I
have is copyrighted.

Paul

On Thu, Jan 2, 2020 at 11:05 AM Tim Ziegler  wrote:

> Tim Just a question but: is there any reason why these manual's can not be
> made available on the Forum?
> At some point someone else will need to have access say 10-20 years from
> now?
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
> Foreston MN 56330
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Thu, Jan 2, 2020 at 11:48 AM Tim Krause  wrote:
>
>> I'm the only authorized member that can distribute the manual.  Make a
>> request to me at artmarb...@comcast.net and I will take care of you.
>> Obviously I'll need to know which machine you own.
>>
>> Happy New Year!
>> On Dec 13, 2019, at 9:14 AM, MWF  wrote:
>>>
>>> If I interpreted his "offer" correctly he'll post them where you can
>>> download them (like in DropBox).
>>> If you want them, you save them to your computer or print them out on
>>> your home/office printer.
>>> So "cost" will only be your time and cost of paper & ink if you print
>>> them.
>>>
>>> Paul, Am I correct in my assumption?
>>>
>>> Thanks.
>>> Mac
>>> --
>>> --
>>>
>>> -Original Message-
>>> From: Ray Leaman
>>> Sent: Dec 13, 2019 12:07 PM
>>> To: legacy-ornamental-mills@googlegroups.com
>>> Subject: Re: Legacy assembly manuals
>>>
>>> I'd also be interested.  Will you post the particulars as to how this
>>> can happen (i.e., cost, etc.)?
>>>
>>> On Fri, Dec 13, 2019 at 2:19 AM MWF  wrote:
>>>
>>>> Paul,
>>>> I'm interested in seeing the scan of the "Z-Axis Assembly Manual".
>>>> Thanks.
>>>> Mac
>>>> --
>>>>
>>>> -Original Message-
>>>> From: Paul Richmond <4pea...@gmail.com>
>>>> Sent: Dec 13, 2019 1:49 AM
>>>> To: Legacy Ornamental Mills
>>>> Subject: Legacy assembly manuals
>>>>
>>>> I’ve found the original assembly manual to my 1200 as well as the Z
>>>> axis assembly manual. Is there any interest in my scanning and posting 
>>>> them?
>>>>
>>>> About 60 pages all together.
>>>>
>>>> Paul
>>>>
>>>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/9423e310-e6d8-44fc-b917-4506e1fae473%40comcast.net
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/9423e310-e6d8-44fc-b917-4506e1fae473%40comcast.net?utm_medium=email_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHzS5NSDprYCgSsJmp4ePVuRF1dM4tVtriDzpTYJ5%3DiZw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHzS5NSDprYCgSsJmp4ePVuRF1dM4tVtriDzpTYJ5%3DiZw%40mail.gmail.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D4-vgd245ObpJ7tQyxNaKSz6euDU-_nVRJEA%2BGiTApt3A%40mail.gmail.com.

Legacy assembly manuals

[Paul Richmond]

I’ve found the original assembly manual to my 1200 as well as the Z axis 
assembly manual.  Is there any interest in my scanning and posting them?

About 60 pages all together.

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/09048488-912d-4035-98c6-86447900f5d7%40googlegroups.com.

Re: Legacy 1800 CNC for sale, and is CNC an option for the occasional Legacy user?

[Paul Richmond]

H...  I don’t know.  I think I’ve only got 7 or 8 of them.
 (I’m a retired programmer that, much to my wife’s displeasure, never threw
anything away.)

All smartassness aside, I’m familiar with Mach 3 and it’s needs.

Thanks for checking though.

Paul

On Thu, Dec 12, 2019 at 3:39 AM IAN  wrote:

> You will need a parallel printer port computer to run mach 3, is that
> something you have? You can use a UC100 adapter to be able to use a USB,
> but make sure you get a genuine one and not an imitation.
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Paul Richmond <4pea...@gmail.com>
> *Sent: *Wednesday, December 11, 2019 8:51 PM
> *To: *legacy-ornamental-mills@googlegroups.com
> *Subject: *Re: Legacy 1800 CNC for sale, and is CNC an option for the
> occasional Legacy user?
>
>
>
> 
>
>
>
> On Wed, Dec 11, 2019 at 5:01 PM finunlim via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Sorry, the area code is 718
>
> Sent from my iPhone
>
> > On Dec 11, 2019, at 7:56 PM, finunlim via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
> >
> > Call my shop tomorrow... 717-729-5630
> >
> > Sent from my iPhone
> >
> >> On Dec 11, 2019, at 4:58 PM, Paul Richmond <4pea...@gmail.com> wrote:
> >>
> >> Joe:  I can’t seem to message or e-mail you directly but I am
> interested in your CNC upgrade.  Please call or message me.
> >>
> >> Paul Richmond
> >> 4pea...@gmail.com
> >> 360-440-0065
> >>
> >> --
> >> You received this message because you are subscribed to the Google
> Groups "Legacy Ornamental Mills" group.
> >> To unsubscribe from this group and stop receiving emails from it, send
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> >> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d2ac6b7d-fd16-4d7b-bf3a-cb9292098ff9%40googlegroups.com
> .
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups "Legacy Ornamental Mills" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> > To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/10B3F3DA-9330-481D-A456-2E87EF6CA228%40aol.com
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0B0098FB-CDCB-41F2-A2ED-DBA884D65841%40aol.com
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D4fpmyU-mFMxa3WEshkNOXL7iSjTEL-GKRV5cLyrW%2Bi9g%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D4fpmyU-mFMxa3WEshkNOXL7iSjTEL-GKRV5cLyrW%2Bi9g%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/5df226ee.1c69fb81.bb5c2.328aSMTPIN_ADDED_MISSING%40gmr-mx.google.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/5df226ee.1c69fb81.bb5c2.328aSMTPIN_ADDED_MISSING%40gmr-mx.google.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D4TcF629-J6pe%3DLz6Mvtd5i4nvrf0kjEC5SREO5-NOTLQ%40mail.gmail.com.

Re: Legacy 1800 CNC for sale, and is CNC an option for the occasional Legacy user?

[Paul Richmond]

Joe:  I can’t seem to message or e-mail you directly but I am interested in 
your CNC upgrade.  Please call or message me.

Paul Richmond
4pea...@gmail.com
360-440-0065

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d2ac6b7d-fd16-4d7b-bf3a-cb9292098ff9%40googlegroups.com.

Re: Legacy 1800 CNC for sale, and is CNC an option for the occasional Legacy user?

[Paul Richmond]

I am very interested but can’t get the link to work.  Is there a time that 
would be convenient to call and talk about it?

Paul Richmond 
360-440-0065

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/6979ec95-feeb-43ab-8b6d-152e2911a1c9%40googlegroups.com.

Re: $500 Legacy on the marketplace

[Paul Richmond]

Yes, but free wood is the best of all...

On Wed, Nov 27, 2019 at 11:51 AM Tim Ziegler  wrote:

> Hey Mark absolutely all wood is good wood. And is beautiful in the eyes of
> the beholder. You are probably going to want to get it dried if you
> want to use it right away.  Other wise it will twist and move and do all
> kinds of wood drying movement.
> If you have a band saw you might beagle to cut some boards  out of it.
> Either way free wood is always a blessing.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> 
> Foreston MN 56330
> 
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Nov 27, 2019 at 12:05 PM Mark  wrote:
>
>> Just had a small ash tree fall (maybe 12" diameter at maximum ) in my
>> backyard.  Missed the cars which was good.  Tree looks like it has been
>> dead for some time and the wood looks pretty dry.  Is it worth cutting up a
>> few of the straight portions for learning on the Legacy ?
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/f4f4a7a0-2e06-46b4-b088-3ee67879420a%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHhs6dT7bSfwkR%3DMSQ5W4sORfMuPahynJo6sthRE_Dr2A%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D4zn%2Bgbf2hda0%2BJgNVxGRBXJK7PpTw5whysXEZfH9x2vw%40mail.gmail.com.

Re: legacy design kit

[Paul Richmond]

There is a video on the design kit located in the Videos directory of the 
following link;

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing

Not the greatest quality but better than nothing.

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/273c25b5-f37b-4b18-a892-a28de27d87bf%40googlegroups.com.

Old, Old Legacy Ornamental Mill Videos.

[Paul Richmond]

I have uploaded four old Legacy Mill related videos to the shared document 
site.  They ain't great but if you are desperate, they may help.  The 
following is a sharable link to the parent directory.  You will find them 
in the Videos folder.

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing

Feel free to share this link with others who may be interested.

Best regards all.
,

Paul


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/58dfd578-d9a4-4f85-a222-8e9db2b99f20%40googlegroups.com.

File library site.

[Paul Richmond]

My contribution to the community...  I will be adding my legacy docs and 
sources here for all.  Anyone with files that you wish to share drop them in 
the Upload directory as I have enabled open sharing on it.  Periodically I will 
organize and move it up to the read only directory below.

Feel free to share the link as it is a read only directory.

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t

Enjoy all,

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/938de8a8-3e0c-4bdf-b3b1-0ac46176f984%40googlegroups.com.

Re: spiral balls

[Paul Richmond]

Very cool!  

Sent from my iPad

> On Jul 21, 2019, at 10:09 PM,   
> wrote:
> 
>  
>Missed a couple
>  
> Bill
>  
>  
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of bulke...@mmnet.com.au
> Sent: Monday, 22 July 2019 3:01 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: FW: spiral balls
>  
>  
>  
> From: bulke...@mmnet.com.au  
> Sent: Monday, 22 July 2019 2:54 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: spiral balls
>  
> I was posting my work to another group the other day (a scroll saw group my 
> other passion)
> And I came across these pics of spiral balls I was doing when I made my 
> legacy ball making attachment
> I thought I would repost if any one is interested
>  
> Bill
>  
> 
> Virus-free. www.avast.com
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000601d5404a%246aa36b70%243fea4250%24%40mmnet.com.au.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d5404b%249b5f8130%24d21e8390%24%40mmnet.com.au.
> 
> 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/A647AD7C-7175-40A8-91FD-984E16B1F3EE%40gmail.com.

Greetings all....

[Paul Richmond]

I’m a new member to the group and a long time Legacy Mill owner.  (I bought the 
display model off the show floor at the Seattle Woodworkers show.)

I have a 1200 with power feed and about every attachment that Legacy has made 
for it.  I have used it on a number of small projects but my single biggest use 
these days is rough turning blanks for making hollow forms on my lathe.  

I’ve grown up working with wood, (our family built commercial fishing boats), 
and am a tried and true tool junkie.  (It’s embarrassing the goodies ive bought 
over the years.  Do I really need all 5 routers?)

I’m looking forward to participating in the group.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/c4d8edfb-a11c-41d1-8ac1-2bf0f64b603e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.