Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Tim Ziegler 
for sure a big help.
I have welders and a torch but most machining I have my Brother do.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 29, 2020 at 9:10 PM Ray Leaman  wrote:

> I was originally trained as a wood and metal patternmaker.  Along the way
> somewhere I moved more into woodworking and did not include metalworking in
> my shop planning.  Metal fabrication with these mills would definitely be a
> plus.  I may need to develop a relationship with a local machine shop.
>
> On Sun, Nov 29, 2020 at 9:16 PM Tim Ziegler  wrote:
>
>> Where there's a will there's a way right.
>> What I can't make my Brother can do. He's big into metal work of all
>> kinds.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Nov 29, 2020 at 8:13 PM Ray Leaman  wrote:
>>
>>> I know. Sounds like you got the talent to make one yourself.
>>>
>>> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler 
>>> wrote:
>>>
 Yea just kidding around Ray.
 I will find one. or make one.
 Kind Regards,

 Timothy J. Ziegler
 Ziegler WoodWork & Specialty
 14171 160th Ave.
 Foreston MN 56330

 320-294-5798 shop
 320-630-2243 cell


 On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:

> Will do but don't hold your breath too long Tim.  As you say, this
> stuff is hard to come by.
>
> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler 
> wrote:
>
>> wow you ever decide you don't have a use for that I've been looking
>> for since I bought my LOM.
>> The thin Stock Follower that is.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman 
>> wrote:
>>
>>> New in the box (NIB)
>>>
>>> Thin Stock Support:  Mounts to the underside of the adjustable bed
>>> rail with 2 - 90 degree mounting brackets, and supports material while
>>> milling thin stock between 5/8" and 1 7/8 " thick.
>>>
>>> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
>>> shields need to be removed to mount the follower.
>>> Can only be used on straight round pieces (no tapers or curves).
>>> Adjustable bed must be set level.  Position support following behind the
>>> cutter when milling stock round. Position support in front of the cutter
>>> when milling spirals.
>>>
>>> Ray
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it,
>>> send an email to
>>> legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
>>> 
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
>> .
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google
> Groups "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
> 
> .
>
 --
 You received this message because you are subscribed to the Google
 Groups "Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to legacy-ornamental-mills+unsubscr...@googlegr

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
Any pics?

On Sun, Nov 29, 2020 at 9:31 PM  wrote:

> No I made my own styles
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 30 November 2020 1:26 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> Did you make your own Bill?   Angle bracket style Vertical vise.
>
> Or are you referring to the sylus's
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 8:24 PM  wrote:
>
> I was an engineer machinist for over 20 years
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Monday, 30 November 2020 1:13 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> I know. Sounds like you got the talent to make one yourself.
>
>
>
> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler  wrote:
>
> Yea just kidding around Ray.
>
> I will find one. or make one.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:
>
> Will do but don't hold your breath too long Tim.  As you say, this stuff
> is hard to come by.
>
>
>
> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler  wrote:
>
> wow you ever decide you don't have a use for that I've been looking for
> since I bought my LOM.
>
> The thin Stock Follower that is.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>
> New in the box (NIB)
>
>
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
>
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
>
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
>
>
> Ray
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
> <https:/

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
So, where are located?   LOL

On Sun, Nov 29, 2020 at 9:24 PM  wrote:

> I was an engineer machinist for over 20 years
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Monday, 30 November 2020 1:13 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> I know. Sounds like you got the talent to make one yourself.
>
>
>
> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler  wrote:
>
> Yea just kidding around Ray.
>
> I will find one. or make one.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:
>
> Will do but don't hold your breath too long Tim.  As you say, this stuff
> is hard to come by.
>
>
>
> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler  wrote:
>
> wow you ever decide you don't have a use for that I've been looking for
> since I bought my LOM.
>
> The thin Stock Follower that is.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>
> New in the box (NIB)
>
>
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
>
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
>
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
>
>
> Ray
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com?utm_medium=email&utm_source=foo

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
I was originally trained as a wood and metal patternmaker.  Along the way
somewhere I moved more into woodworking and did not include metalworking in
my shop planning.  Metal fabrication with these mills would definitely be a
plus.  I may need to develop a relationship with a local machine shop.

On Sun, Nov 29, 2020 at 9:16 PM Tim Ziegler  wrote:

> Where there's a will there's a way right.
> What I can't make my Brother can do. He's big into metal work of all
> kinds.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Nov 29, 2020 at 8:13 PM Ray Leaman  wrote:
>
>> I know. Sounds like you got the talent to make one yourself.
>>
>> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler 
>> wrote:
>>
>>> Yea just kidding around Ray.
>>> I will find one. or make one.
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> Foreston MN 56330
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:
>>>
 Will do but don't hold your breath too long Tim.  As you say, this
 stuff is hard to come by.

 On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler 
 wrote:

> wow you ever decide you don't have a use for that I've been looking
> for since I bought my LOM.
> The thin Stock Follower that is.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>
>> New in the box (NIB)
>>
>> Thin Stock Support:  Mounts to the underside of the adjustable bed
>> rail with 2 - 90 degree mounting brackets, and supports material while
>> milling thin stock between 5/8" and 1 7/8 " thick.
>>
>> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
>> shields need to be removed to mount the follower.
>> Can only be used on straight round pieces (no tapers or curves).
>> Adjustable bed must be set level.  Position support following behind the
>> cutter when milling stock round. Position support in front of the cutter
>> when milling spirals.
>>
>> Ray
>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
>> .
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google
> Groups "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
> 
> .
>
 --
 You received this message because you are subscribed to the Google
 Groups "Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To view this discussion on the web visit
 https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
 
 .

>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com
>>> 
>>> .
>>>
>> --
>> You received this message because you a

RE: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread bulkeley 
No I made my own styles

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 30 November 2020 1:26 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

 

Did you make your own Bill?   Angle bracket style Vertical vise. 

Or are you referring to the sylus's




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 29, 2020 at 8:24 PM mailto:bulke...@mmnet.com.au> > wrote:

I was an engineer machinist for over 20 years 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Ray Leaman
Sent: Monday, 30 November 2020 1:13 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

 

I know. Sounds like you got the talent to make one yourself. 

 

On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Yea just kidding around Ray. 

I will find one. or make one.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman mailto:view...@gmail.com> > wrote:

Will do but don't hold your breath too long Tim.  As you say, this stuff is 
hard to come by.

 

On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

wow you ever decide you don't have a use for that I've been looking for since I 
bought my LOM. 

The thin Stock Follower that is. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman mailto:view...@gmail.com> > wrote:

New in the box (NIB)

 

Thin Stock Support:  Mounts to the underside of the adjustable bed rail with 2 
- 90 degree mounting brackets, and supports material while milling thin stock 
between 5/8" and 1 7/8 " thick.

 

Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust shields 
need to be removed to mount the follower.

Can only be used on straight round pieces (no tapers or curves). Adjustable bed 
must be set level.  Position support following behind the cutter when milling 
stock round. Position support in front of the cutter when milling spirals.

 

Ray

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Tim Ziegler 
Did you make your own Bill?   Angle bracket style Vertical vise.
Or are you referring to the sylus's

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 29, 2020 at 8:24 PM  wrote:

> I was an engineer machinist for over 20 years
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Monday, 30 November 2020 1:13 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> I know. Sounds like you got the talent to make one yourself.
>
>
>
> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler  wrote:
>
> Yea just kidding around Ray.
>
> I will find one. or make one.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:
>
> Will do but don't hold your breath too long Tim.  As you say, this stuff
> is hard to come by.
>
>
>
> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler  wrote:
>
> wow you ever decide you don't have a use for that I've been looking for
> since I bought my LOM.
>
> The thin Stock Follower that is.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>
> New in the box (NIB)
>
>
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
>
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
>
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
>
>
> Ray
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7

RE: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread bulkeley 
I was an engineer machinist for over 20 years 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray Leaman
Sent: Monday, 30 November 2020 1:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

 

I know. Sounds like you got the talent to make one yourself. 

 

On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Yea just kidding around Ray. 

I will find one. or make one.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman mailto:view...@gmail.com> > wrote:

Will do but don't hold your breath too long Tim.  As you say, this stuff is 
hard to come by.

 

On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

wow you ever decide you don't have a use for that I've been looking for since I 
bought my LOM. 

The thin Stock Follower that is. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman mailto:view...@gmail.com> > wrote:

New in the box (NIB)

 

Thin Stock Support:  Mounts to the underside of the adjustable bed rail with 2 
- 90 degree mounting brackets, and supports material while milling thin stock 
between 5/8" and 1 7/8 " thick.

 

Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust shields 
need to be removed to mount the follower.

Can only be used on straight round pieces (no tapers or curves). Adjustable bed 
must be set level.  Position support following behind the cutter when milling 
stock round. Position support in front of the cutter when milling spirals.

 

Ray

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com&g

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Tim Ziegler 
Where there's a will there's a way right.
What I can't make my Brother can do. He's big into metal work of all kinds.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 29, 2020 at 8:13 PM Ray Leaman  wrote:

> I know. Sounds like you got the talent to make one yourself.
>
> On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler  wrote:
>
>> Yea just kidding around Ray.
>> I will find one. or make one.
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:
>>
>>> Will do but don't hold your breath too long Tim.  As you say, this stuff
>>> is hard to come by.
>>>
>>> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler 
>>> wrote:
>>>
 wow you ever decide you don't have a use for that I've been looking for
 since I bought my LOM.
 The thin Stock Follower that is.

 Kind Regards,

 Timothy J. Ziegler
 Ziegler WoodWork & Specialty
 14171 160th Ave.
 Foreston MN 56330

 320-294-5798 shop
 320-630-2243 cell


 On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:

> New in the box (NIB)
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed
> rail with 2 - 90 degree mounting brackets, and supports material while
> milling thin stock between 5/8" and 1 7/8 " thick.
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
> Ray
>
> --
> You received this message because you are subscribed to the Google
> Groups "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
> 
> .
>
 --
 You received this message because you are subscribed to the Google
 Groups "Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To view this discussion on the web visit
 https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
 
 .

>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
>>> 
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdLq3mJ1JehNOTt2ueVBOSc%2BwOr-txB0gMYqMJqC%2BUSGKQ%40mail.gmail.com
>

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
I know. Sounds like you got the talent to make one yourself.

On Sun, Nov 29, 2020 at 8:37 PM Tim Ziegler  wrote:

> Yea just kidding around Ray.
> I will find one. or make one.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:
>
>> Will do but don't hold your breath too long Tim.  As you say, this stuff
>> is hard to come by.
>>
>> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler 
>> wrote:
>>
>>> wow you ever decide you don't have a use for that I've been looking for
>>> since I bought my LOM.
>>> The thin Stock Follower that is.
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> Foreston MN 56330
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>>>
 New in the box (NIB)

 Thin Stock Support:  Mounts to the underside of the adjustable bed rail
 with 2 - 90 degree mounting brackets, and supports material while milling
 thin stock between 5/8" and 1 7/8 " thick.

 Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
 shields need to be removed to mount the follower.
 Can only be used on straight round pieces (no tapers or curves).
 Adjustable bed must be set level.  Position support following behind the
 cutter when milling stock round. Position support in front of the cutter
 when milling spirals.

 Ray

 --
 You received this message because you are subscribed to the Google
 Groups "Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To view this discussion on the web visit
 https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
 
 .

>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
>>> 
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdLq3mJ1JehNOTt2ueVBOSc%2BwOr-txB0gMYqMJqC%2BUSGKQ%40mail.gmail.com.

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Tim Ziegler 
Yea just kidding around Ray.
I will find one. or make one.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 29, 2020 at 4:59 PM Ray Leaman  wrote:

> Will do but don't hold your breath too long Tim.  As you say, this stuff
> is hard to come by.
>
> On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler  wrote:
>
>> wow you ever decide you don't have a use for that I've been looking for
>> since I bought my LOM.
>> The thin Stock Follower that is.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>>
>>> New in the box (NIB)
>>>
>>> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
>>> with 2 - 90 degree mounting brackets, and supports material while milling
>>> thin stock between 5/8" and 1 7/8 " thick.
>>>
>>> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
>>> shields need to be removed to mount the follower.
>>> Can only be used on straight round pieces (no tapers or curves).
>>> Adjustable bed must be set level.  Position support following behind the
>>> cutter when milling stock round. Position support in front of the cutter
>>> when milling spirals.
>>>
>>> Ray
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
>>> 
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF2PKTCHTq7y-uSCi1AaaPx813cGx8Pt7b%2BwMpMdsQzLw%40mail.gmail.com.

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
Will do but don't hold your breath too long Tim.  As you say, this stuff is
hard to come by.

On Sun, Nov 29, 2020 at 1:55 PM Tim Ziegler  wrote:

> wow you ever decide you don't have a use for that I've been looking for
> since I bought my LOM.
> The thin Stock Follower that is.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:
>
>> New in the box (NIB)
>>
>> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
>> with 2 - 90 degree mounting brackets, and supports material while milling
>> thin stock between 5/8" and 1 7/8 " thick.
>>
>> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
>> shields need to be removed to mount the follower.
>> Can only be used on straight round pieces (no tapers or curves).
>> Adjustable bed must be set level.  Position support following behind the
>> cutter when milling stock round. Position support in front of the cutter
>> when milling spirals.
>>
>> Ray
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdK67LPHMqhw7jfZ1GzbbAEDPtMRzJ21f%2B%3DruLyn%2BRexjA%40mail.gmail.com.

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
I didn't know that until I got feedback from the members here saying what
you have.  Having studied long and hard on legacy mills I knew what I was
getting but I assumed all the serious owners/users here had all this stuff
and more.  I guess I did all right then.

Thanks

Ray

On Sun, Nov 29, 2020 at 4:08 PM  wrote:

> You really lucked out ray you got it all some of us it took years to
> accumulate all those extras some are still looking congrats
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Ray Leaman
> *Sent:* Monday, 30 November 2020 4:15 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* My 1200 - Accessories: Thin Stock Support and Thin Stock
> Follower
>
>
>
> New in the box (NIB)
>
>
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
>
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
>
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
>
>
> Ray
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
>
> --
> [image: Avast logo] <https://www.avast.com/antivirus>
>
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com <https://www.avast.com/antivirus>
>
> <#m_-8980069697014199634_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d6c693%24b9ceac70%242d6c0550%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d6c693%24b9ceac70%242d6c0550%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdLW%3Db_hB2Z%2Bz7Qgss1WdyE%3DOOTBuGmfnouD8f77gMNdQQ%40mail.gmail.com.

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Ray Leaman 
Seems someone on this site raised an objection  question about copying
materials for broad distribution.  Doing it as an individual seems o.k. so
that 's what I did.

On Sun, Nov 29, 2020 at 12:34 PM M.W.Foscue  wrote:

> Ray,
> The gift that keeps on giving!  Can't wait for the next thing you post!
> Since all these are NIB - you seem to have all the paperwork that they
> came with - instruction sheet(s), etc.
> When you get the chance, would you please scan all of them and put them in
> an email to The Group?
> Scanned, they will not be as big of a file vs photos would; and their
> clarity should be as good as the originals.
> I imagine many of us have acquired our Mills like you did - buying them
> from the original (or follow-on) owners.  Probably in many cases, the
> Instruction sheets were not included in that purchase.   They were probably
> filed in binders by owner - but since binders were elsewhere in the shop or
> house, did not go out the door with the Mill.  {:-(
>
> Thanks again.
> Mac
> --
>
> -Original Message-
> From: Ray Leaman
> Sent: Nov 29, 2020 12:14 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower
>
> New in the box (NIB)
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
> Ray
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/197161389.1410.1606671273194%40wamui-charming.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/197161389.1410.1606671273194%40wamui-charming.atl.sa.earthlink.net?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdJtCiitvZA0UO9WQYr5%2BcEaetX4HKgxtB4GwfR%2B5p_FKQ%40mail.gmail.com.

RE: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread bulkeley 
You really lucked out ray you got it all some of us it took years to accumulate 
all those extras some are still looking congrats

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray Leaman
Sent: Monday, 30 November 2020 4:15 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

 

New in the box (NIB)

 

Thin Stock Support:  Mounts to the underside of the adjustable bed rail with 2 
- 90 degree mounting brackets, and supports material while milling thin stock 
between 5/8" and 1 7/8 " thick.

 

Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust shields 
need to be removed to mount the follower.

Can only be used on straight round pieces (no tapers or curves). Adjustable bed 
must be set level.  Position support following behind the cutter when milling 
stock round. Position support in front of the cutter when milling spirals.

 

Ray

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d6c693%24b9ceac70%242d6c0550%24%40mmnet.com.au.

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread Tim Ziegler 
wow you ever decide you don't have a use for that I've been looking for
since I bought my LOM.
The thin Stock Follower that is.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 29, 2020 at 11:15 AM Ray Leaman  wrote:

> New in the box (NIB)
>
> Thin Stock Support:  Mounts to the underside of the adjustable bed rail
> with 2 - 90 degree mounting brackets, and supports material while milling
> thin stock between 5/8" and 1 7/8 " thick.
>
> Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust
> shields need to be removed to mount the follower.
> Can only be used on straight round pieces (no tapers or curves).
> Adjustable bed must be set level.  Position support following behind the
> cutter when milling stock round. Position support in front of the cutter
> when milling spirals.
>
> Ray
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BKUpdBNTHPpNTa5YL9H6r86Xp4UYKUC6DcZQVDCTaLQw%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFqrFoLdg8b5uwoSSPcaCWvE2c0bg5eQHZhQjVFsYTpMg%40mail.gmail.com.

Re: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

2020-11-29 Thread M.W.Foscue 
Ray,The gift that keeps on giving!  Can't wait for the next thing you post!Since all these are NIB - you seem to have all the paperwork that they came with - instruction sheet(s), etc.When you get the chance, would you please scan all of them and put them in an email to The Group?Scanned, they will not be as big of a file vs photos would; and their clarity should be as good as the originals.I imagine many of us have acquired our Mills like you did - buying them from the original (or follow-on) owners.  Probably in many cases, the Instruction sheets were not included in that purchase.   They were probably filed in binders by owner - but since binders were elsewhere in the shop or house, did not go out the door with the Mill.  {:-(Thanks again.Mac-Original Message-
From: Ray Leaman 
Sent: Nov 29, 2020 12:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: My 1200 - Accessories: Thin Stock Support and Thin Stock Follower

New in the box (NIB)Thin Stock Support:  Mounts to the underside of the adjustable bed rail with 2 - 90 degree mounting brackets, and supports material while milling thin stock between 5/8" and 1 7/8 " thick.Thin Stock Follower:  Mounts to the router carriage.  The vinyl dust shields need to be removed to mount the follower.Can only be used on straight round pieces (no tapers or curves). Adjustable bed must be set level.  Position support following behind the cutter when milling stock round. Position support in front of the cutter when milling spirals.Ray






-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/197161389.1410.1606671273194%40wamui-charming.atl.sa.earthlink.net.