Re: Bill's Square blossom rossette

2023-01-09 Thread Tim Ziegler 
Yup and they are the cats meow! Lots of fun
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jan 9, 2023 at 9:14 PM  wrote:

> Then add a wave attachment into the mix and away we go again with more
> options lol
>
> https://www.youtube.com/watch?v=-n6RmUS5dkY
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 10 January 2023 1:58 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Bill's Square blossom rossette
>
>
>
> You will also have to make up something similar to this
> https://www.youtube.com/watch?v=EjdKjtI_90U_channel=aussiman77181
>
> If you don’t have the legacy version, motorising it opens up a world more
> options than just hand cranking
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Dan Krager
> *Sent:* Tuesday, 10 January 2023 1:50 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Bill's Square blossom rossette
>
>
>
> Thanks, Bill.  I have changed playback speed many times on other videos.
> The moves make sense now and I do have a Legacy rotary table.
>
> DanK
>
>
>
> On Monday, January 9, 2023 at 2:13:34 PM UTC-5 aussiman wrote:
>
> Yes Dan it was set at the centre of the table, no need for sound its only
> music my videos have no talking you don’t need to hear them, you just mill
> through from one side to the other stop then unlock the split nut  move the
> saddle along 2 inches and relock the split nut then mill back across stop,
> unlock the split nut again and move the saddle a further 1 inch mill across
> again stop unlock the split nut once again move the saddle 2 inches one
> last time lock the split nut and mill the final pass , 4 passes across the
> blank in total and moving the saddle always the one direction each time.
>
> Now if you make your own rotary table unless the gear ratios are the same
> as legacys you could never make that blossom.
>
>
>
> to help when you watch it turn the sound off and increases the playback
> speed to 2 times faster to save time click that little gear looking icon at
> the bottom of the screen the playback speed is there
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Dan Krager
> *Sent:* Tuesday, 10 January 2023 3:39 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Bill's Square blossom rossette
>
>
>
> Bill, was the blossom "pattern" center aligned with center of rotary
> table?  Imma look at that more times to understand how the next cut stops
> were set up.  I'll put the sound on next timeseven though I'm mostly
> deaf.
>
> DanK
>
>
>
> On Sunday, January 8, 2023 at 10:56:30 PM UTC-5 Curt George wrote:
>
> Hey that Bill
>
>
>
> I too have plans of granger that is one hold, but due to the Cold temps.
> and the basic loss of my beloved Radiant Kerosene heater. (do to Gov.
> problems, Kerosene is at $10.00 a gal.  I normally go through appx. 250
> gal. a year heating my garage/shop.)  I am looking into a new source of
> heat for my shop. ;-( .
>
>
>
> C.A.G.
>
>
>
> On Sunday, January 8, 2023 at 10:34:27 PM EST, 
> wrote:
>
>
>
>
>
> I intend to make 5 of them and make a box out of it when I can get back in
> my shop it’s too hot for a while yet
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com>
> *Sent:* Monday, 9 January 2023 2:10 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Bill's Square blossom rossette
>
>
>
> I liked it.   No matter if its prefect or not.
>
> Im sure many of our group have not seen the original video.
>
> Its all new to those want to learn.
>
> I saw things in your video that I have not seen before.
>
>
>
> They say, what is old, becomes new again.  ;-)
>
>
>
> Good job, Bill.
>
> and Thank you.
>
>
>
> C.A.G.
>
>
>
> On Sunday, January 8, 2023 at 10:02:21 PM EST, 
> wrote:
>
>
>
>
>
> Nothing much curt its just a redo of an old video I did, after watching it
> again I noticed I edited it wrong
>
> So I fixed it and added a couple of pics so it nothing new just corrected
> now
>
>
>
> Bill
>
>
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com>
> *Sent:* Monday, 9 January 202

RE: Bill's Square blossom rossette

2023-01-09 Thread bulkeley 
Then add a wave attachment into the mix and away we go again with more options 
lol

https://www.youtube.com/watch?v=-n6RmUS5dkY

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, 10 January 2023 1:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Bill's Square blossom rossette

 

You will also have to make up something similar to this 
https://www.youtube.com/watch?v=EjdKjtI_90U 
<https://www.youtube.com/watch?v=EjdKjtI_90U_channel=aussiman77181> 
_channel=aussiman77181

If you don’t have the legacy version, motorising it opens up a world more 
options than just hand cranking

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Dan Krager
Sent: Tuesday, 10 January 2023 1:50 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Bill's Square blossom rossette

 

Thanks, Bill.  I have changed playback speed many times on other videos.  The 
moves make sense now and I do have a Legacy rotary table.

DanK

 

On Monday, January 9, 2023 at 2:13:34 PM UTC-5 aussiman wrote:

Yes Dan it was set at the centre of the table, no need for sound its only music 
my videos have no talking you don’t need to hear them, you just mill through 
from one side to the other stop then unlock the split nut  move the saddle 
along 2 inches and relock the split nut then mill back across stop, unlock the 
split nut again and move the saddle a further 1 inch mill across again stop 
unlock the split nut once again move the saddle 2 inches one last time lock the 
split nut and mill the final pass , 4 passes across the blank in total and 
moving the saddle always the one direction each time.

Now if you make your own rotary table unless the gear ratios are the same as 
legacys you could never make that blossom.

 

to help when you watch it turn the sound off and increases the playback speed 
to 2 times faster to save time click that little gear looking icon at the 
bottom of the screen the playback speed is there

 

Bill 

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Dan Krager
Sent: Tuesday, 10 January 2023 3:39 AM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Re: Bill's Square blossom rossette

 

Bill, was the blossom "pattern" center aligned with center of rotary table?  
Imma look at that more times to understand how the next cut stops were set up.  
I'll put the sound on next timeseven though I'm mostly deaf.

DanK

 

On Sunday, January 8, 2023 at 10:56:30 PM UTC-5 Curt George wrote:

Hey that Bill

 

I too have plans of granger that is one hold, but due to the Cold temps. and 
the basic loss of my beloved Radiant Kerosene heater. (do to Gov. problems, 
Kerosene is at $10.00 a gal.  I normally go through appx. 250 gal. a year 
heating my garage/shop.)  I am looking into a new source of heat for my shop. 
;-( .

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:34:27 PM EST, mailto:bulk...@mmnet.com.au> > wrote: 

 

 

I intend to make 5 of them and make a box out of it when I can get back in my 
shop it’s too hot for a while yet 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-orna...@googlegroups.com> > 
Sent: Monday, 9 January 2023 2:10 PM
To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 
Subject: Re: Bill's Square blossom rossette

 

I liked it.   No matter if its prefect or not.

Im sure many of our group have not seen the original video.

Its all new to those want to learn. 

I saw things in your video that I have not seen before. 

 

They say, what is old, becomes new again.  ;-)

 

Good job, Bill.

and Thank you.

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:02:21 PM EST, mailto:bulk...@mmnet.com.au> > wrote: 

 

 

Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-orna...@googlegroups.com> > 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills mailto:legacy-orna...@googlegroups.com> >
Subject: Bill's Square blossom rossette

 

https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !

 

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/

RE: Bill's Square blossom rossette

2023-01-09 Thread bulkeley 
You will also have to make up something similar to this 
https://www.youtube.com/watch?v=EjdKjtI_90U 
<https://www.youtube.com/watch?v=EjdKjtI_90U_channel=aussiman77181> 
_channel=aussiman77181

If you don’t have the legacy version, motorising it opens up a world more 
options than just hand cranking

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Dan Krager
Sent: Tuesday, 10 January 2023 1:50 PM
To: Legacy Ornamental Mills 
Subject: Re: Bill's Square blossom rossette

 

Thanks, Bill.  I have changed playback speed many times on other videos.  The 
moves make sense now and I do have a Legacy rotary table.

DanK

 

On Monday, January 9, 2023 at 2:13:34 PM UTC-5 aussiman wrote:

Yes Dan it was set at the centre of the table, no need for sound its only music 
my videos have no talking you don’t need to hear them, you just mill through 
from one side to the other stop then unlock the split nut  move the saddle 
along 2 inches and relock the split nut then mill back across stop, unlock the 
split nut again and move the saddle a further 1 inch mill across again stop 
unlock the split nut once again move the saddle 2 inches one last time lock the 
split nut and mill the final pass , 4 passes across the blank in total and 
moving the saddle always the one direction each time.

Now if you make your own rotary table unless the gear ratios are the same as 
legacys you could never make that blossom.

 

to help when you watch it turn the sound off and increases the playback speed 
to 2 times faster to save time click that little gear looking icon at the 
bottom of the screen the playback speed is there

 

Bill 

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Dan Krager
Sent: Tuesday, 10 January 2023 3:39 AM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Re: Bill's Square blossom rossette

 

Bill, was the blossom "pattern" center aligned with center of rotary table?  
Imma look at that more times to understand how the next cut stops were set up.  
I'll put the sound on next timeseven though I'm mostly deaf.

DanK

 

On Sunday, January 8, 2023 at 10:56:30 PM UTC-5 Curt George wrote:

Hey that Bill

 

I too have plans of granger that is one hold, but due to the Cold temps. and 
the basic loss of my beloved Radiant Kerosene heater. (do to Gov. problems, 
Kerosene is at $10.00 a gal.  I normally go through appx. 250 gal. a year 
heating my garage/shop.)  I am looking into a new source of heat for my shop. 
;-( .

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:34:27 PM EST, mailto:bulk...@mmnet.com.au> > wrote: 

 

 

I intend to make 5 of them and make a box out of it when I can get back in my 
shop it’s too hot for a while yet 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-orna...@googlegroups.com> > 
Sent: Monday, 9 January 2023 2:10 PM
To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 
Subject: Re: Bill's Square blossom rossette

 

I liked it.   No matter if its prefect or not.

Im sure many of our group have not seen the original video.

Its all new to those want to learn. 

I saw things in your video that I have not seen before. 

 

They say, what is old, becomes new again.  ;-)

 

Good job, Bill.

and Thank you.

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:02:21 PM EST, mailto:bulk...@mmnet.com.au> > wrote: 

 

 

Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-orna...@googlegroups.com> > 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills mailto:legacy-orna...@googlegroups.com> >
Subject: Bill's Square blossom rossette

 

https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !

 

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To v

Re: Bill's Square blossom rossette

2023-01-09 Thread Dan Krager 
Thanks, Bill.  I have changed playback speed many times on other videos.  
The moves make sense now and I do have a Legacy rotary table.
DanK

On Monday, January 9, 2023 at 2:13:34 PM UTC-5 aussiman wrote:

> Yes Dan it was set at the centre of the table, no need for sound its only 
> music my videos have no talking you don’t need to hear them, you just mill 
> through from one side to the other stop then unlock the split nut  move the 
> saddle along 2 inches and relock the split nut then mill back across stop, 
> unlock the split nut again and move the saddle a further 1 inch mill across 
> again stop unlock the split nut once again move the saddle 2 inches one 
> last time lock the split nut and mill the final pass , 4 passes across the 
> blank in total and moving the saddle always the one direction each time.
>
> Now if you make your own rotary table unless the gear ratios are the same 
> as legacys you could never make that blossom.
>
>  
>
> to help when you watch it turn the sound off and increases the playback 
> speed to 2 times faster to save time click that little gear looking icon at 
> the bottom of the screen the playback speed is there
>
>  
>
> Bill 
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Dan Krager
> *Sent:* Tuesday, 10 January 2023 3:39 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Bill's Square blossom rossette
>
>  
>
> Bill, was the blossom "pattern" center aligned with center of rotary 
> table?  Imma look at that more times to understand how the next cut stops 
> were set up.  I'll put the sound on next timeseven though I'm mostly 
> deaf.
>
> DanK
>
>  
>
> On Sunday, January 8, 2023 at 10:56:30 PM UTC-5 Curt George wrote:
>
> Hey that Bill
>
>  
>
> I too have plans of granger that is one hold, but due to the Cold temps. 
> and the basic loss of my beloved Radiant Kerosene heater. (do to Gov. 
> problems, Kerosene is at $10.00 a gal.  I normally go through appx. 250 
> gal. a year heating my garage/shop.)  I am looking into a new source of 
> heat for my shop. ;-( .
>
>  
>
> C.A.G.
>
>  
>
> On Sunday, January 8, 2023 at 10:34:27 PM EST,  
> wrote: 
>
>  
>
>  
>
> I intend to make 5 of them and make a box out of it when I can get back in 
> my shop it’s too hot for a while yet 
>
>  
>
> Bill
>
>  
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> 
> *Sent:* Monday, 9 January 2023 2:10 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Bill's Square blossom rossette
>
>  
>
> I liked it.   No matter if its prefect or not.
>
> Im sure many of our group have not seen the original video.
>
> Its all new to those want to learn. 
>
> I saw things in your video that I have not seen before. 
>
>  
>
> They say, what is old, becomes new again.  ;-)
>
>  
>
> Good job, Bill.
>
> and Thank you.
>
>  
>
> C.A.G.
>
>  
>
> On Sunday, January 8, 2023 at 10:02:21 PM EST,  
> wrote: 
>
>  
>
>  
>
> Nothing much curt its just a redo of an old video I did, after watching it 
> again I noticed I edited it wrong
>
> So I fixed it and added a couple of pics so it nothing new just corrected 
> now
>
>  
>
> Bill
>
>  
>
>  
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> 
> *Sent:* Monday, 9 January 2023 11:27 AM
> *To:* Legacy ornamental mills 
> *Subject:* Bill's Square blossom rossette
>
>  
>
> https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !
>
>  
>
>  
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au
>  
> <http

RE: Bill's Square blossom rossette

2023-01-09 Thread bulkeley 
Yes Dan it was set at the centre of the table, no need for sound its only music 
my videos have no talking you don’t need to hear them, you just mill through 
from one side to the other stop then unlock the split nut  move the saddle 
along 2 inches and relock the split nut then mill back across stop, unlock the 
split nut again and move the saddle a further 1 inch mill across again stop 
unlock the split nut once again move the saddle 2 inches one last time lock the 
split nut and mill the final pass , 4 passes across the blank in total and 
moving the saddle always the one direction each time.

Now if you make your own rotary table unless the gear ratios are the same as 
legacys you could never make that blossom.

 

to help when you watch it turn the sound off and increases the playback speed 
to 2 times faster to save time click that little gear looking icon at the 
bottom of the screen the playback speed is there

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Dan Krager
Sent: Tuesday, 10 January 2023 3:39 AM
To: Legacy Ornamental Mills 
Subject: Re: Bill's Square blossom rossette

 

Bill, was the blossom "pattern" center aligned with center of rotary table?  
Imma look at that more times to understand how the next cut stops were set up.  
I'll put the sound on next timeseven though I'm mostly deaf.

DanK

 

On Sunday, January 8, 2023 at 10:56:30 PM UTC-5 Curt George wrote:

Hey that Bill

 

I too have plans of granger that is one hold, but due to the Cold temps. and 
the basic loss of my beloved Radiant Kerosene heater. (do to Gov. problems, 
Kerosene is at $10.00 a gal.  I normally go through appx. 250 gal. a year 
heating my garage/shop.)  I am looking into a new source of heat for my shop. 
;-( .

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:34:27 PM EST, mailto:bulk...@mmnet.com.au> > wrote: 

 

 

I intend to make 5 of them and make a box out of it when I can get back in my 
shop it’s too hot for a while yet 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-orna...@googlegroups.com> > 
Sent: Monday, 9 January 2023 2:10 PM
To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 
Subject: Re: Bill's Square blossom rossette

 

I liked it.   No matter if its prefect or not.

Im sure many of our group have not seen the original video.

Its all new to those want to learn. 

I saw things in your video that I have not seen before. 

 

They say, what is old, becomes new again.  ;-)

 

Good job, Bill.

and Thank you.

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:02:21 PM EST, mailto:bulk...@mmnet.com.au> > wrote: 

 

 

Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-orna...@googlegroups.com> > 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills mailto:legacy-orna...@googlegroups.com> >
Subject: Bill's Square blossom rossette

 

https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !

 

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%

Re: Bill's Square blossom rossette

2023-01-09 Thread Dan Krager 
Bill, was the blossom "pattern" center aligned with center of rotary 
table?  Imma look at that more times to understand how the next cut stops 
were set up.  I'll put the sound on next timeseven though I'm mostly 
deaf.
DanK

On Sunday, January 8, 2023 at 10:56:30 PM UTC-5 Curt George wrote:

> Hey that Bill
>
> I too have plans of granger that is one hold, but due to the Cold temps. 
> and the basic loss of my beloved Radiant Kerosene heater. (do to Gov. 
> problems, Kerosene is at $10.00 a gal.  I normally go through appx. 250 
> gal. a year heating my garage/shop.)  I am looking into a new source of 
> heat for my shop. ;-( .
>
> C.A.G.
>
> On Sunday, January 8, 2023 at 10:34:27 PM EST,  
> wrote: 
>
>
> I intend to make 5 of them and make a box out of it when I can get back in 
> my shop it’s too hot for a while yet 
>
>  
>
> Bill
>
>  
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> 
> *Sent:* Monday, 9 January 2023 2:10 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Bill's Square blossom rossette
>
>  
>
> I liked it.   No matter if its prefect or not.
>
> Im sure many of our group have not seen the original video.
>
> Its all new to those want to learn. 
>
> I saw things in your video that I have not seen before. 
>
>  
>
> They say, what is old, becomes new again.  ;-)
>
>  
>
> Good job, Bill.
>
> and Thank you.
>
>  
>
> C.A.G.
>
>  
>
> On Sunday, January 8, 2023 at 10:02:21 PM EST,  
> wrote: 
>
>  
>
>  
>
> Nothing much curt its just a redo of an old video I did, after watching it 
> again I noticed I edited it wrong
>
> So I fixed it and added a couple of pics so it nothing new just corrected 
> now
>
>  
>
> Bill
>
>  
>
>  
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com> 
> *Sent:* Monday, 9 January 2023 11:27 AM
> *To:* Legacy ornamental mills 
> *Subject:* Bill's Square blossom rossette
>
>  
>
> https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !
>
>  
>
>  
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d923db%2441a08870%24c4e19950%24%40mmnet.com.au
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d923db%2441a08870%24c4e19950%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/587a2f94-a101-4638-affe-3927531a005cn%40googlegroups.com.

Re: Bill's Square blossom rossette

2023-01-08 Thread 'Curt George' via Legacy Ornamental Mills 
 Hey that Bill
I too have plans of granger that is one hold, but due to the Cold temps. and 
the basic loss of my beloved Radiant Kerosene heater. (do to Gov. problems, 
Kerosene is at $10.00 a gal.  I normally go through appx. 250 gal. a year 
heating my garage/shop.)  I am looking into a new source of heat for my shop. 
;-( .

C.A.G.
On Sunday, January 8, 2023 at 10:34:27 PM EST,  
wrote:  
 
 
I intend to make 5 of them and make a box out of it when I can get back in my 
shop it’s too hot for a while yet 

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 9 January 2023 2:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Bill's Square blossom rossette

  

I liked it.   No matter if its prefect or not.

Im sure many of our group have not seen the original video.

Its all new to those want to learn. 

I saw things in your video that I have not seen before. 

  

They say, what is old, becomes new again.  ;-)

  

Good job, Bill.

and Thank you.

  

C.A.G.

  

On Sunday, January 8, 2023 at 10:02:21 PM EST,  wrote: 

  

  

Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills 
Subject: Bill's Square blossom rossette

 

https://www.youtube.com/watch?v=bUR3wT4JPms     Good job Bill !

 

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d923db%2441a08870%24c4e19950%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2144451031.4779461.1673236585895%40mail.yahoo.com.

Re: Bill's Square blossom rossette

2023-01-08 Thread Tim Ziegler 
Hey Turn the fan on high and have some fun my friend.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Jan 8, 2023 at 9:34 PM  wrote:

> I intend to make 5 of them and make a box out of it when I can get back in
> my shop it’s too hot for a while yet
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 9 January 2023 2:10 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Bill's Square blossom rossette
>
>
>
> I liked it.   No matter if its prefect or not.
>
> Im sure many of our group have not seen the original video.
>
> Its all new to those want to learn.
>
> I saw things in your video that I have not seen before.
>
>
>
> They say, what is old, becomes new again.  ;-)
>
>
>
> Good job, Bill.
>
> and Thank you.
>
>
>
> C.A.G.
>
>
>
> On Sunday, January 8, 2023 at 10:02:21 PM EST, 
> wrote:
>
>
>
>
>
> Nothing much curt its just a redo of an old video I did, after watching it
> again I noticed I edited it wrong
>
> So I fixed it and added a couple of pics so it nothing new just corrected
> now
>
>
>
> Bill
>
>
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 9 January 2023 11:27 AM
> *To:* Legacy ornamental mills 
> *Subject:* Bill's Square blossom rossette
>
>
>
> https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !
>
>
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d923db%2441a08870%24c4e19950%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d923db%2441a08870%24c4e19950%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEEqtbc1z7r2Brx-VxLcb%2Bfa8-E9j5CLaKWagOo%3D-4oJg%40mail.gmail.com.

RE: Bill's Square blossom rossette

2023-01-08 Thread bulkeley 
I intend to make 5 of them and make a box out of it when I can get back in my 
shop it’s too hot for a while yet 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 9 January 2023 2:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Bill's Square blossom rossette

 

I liked it.   No matter if its prefect or not.

Im sure many of our group have not seen the original video.

Its all new to those want to learn. 

I saw things in your video that I have not seen before. 

 

They say, what is old, becomes new again.  ;-)

 

Good job, Bill.

and Thank you.

 

C.A.G.

 

On Sunday, January 8, 2023 at 10:02:21 PM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Bill's Square blossom rossette

 

https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !

 

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d923db%2441a08870%24c4e19950%24%40mmnet.com.au.

Re: Bill's Square blossom rossette

2023-01-08 Thread 'Curt George' via Legacy Ornamental Mills 
 I liked it.   No matter if its prefect or not.Im sure many of our group have 
not seen the original video.Its all new to those want to learn. I saw things in 
your video that I have not seen before. 
They say, what is old, becomes new again.  ;-)
Good job, Bill.and Thank you.
C.A.G.
On Sunday, January 8, 2023 at 10:02:21 PM EST,  
wrote:  
 
 
Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

  

Bill

  

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills 
Subject: Bill's Square blossom rossette

  

https://www.youtube.com/watch?v=bUR3wT4JPms     Good job Bill !

  

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1206165985.3938225.1673233814309%40mail.yahoo.com.

RE: Bill's Square blossom rossette

2023-01-08 Thread bulkeley 
Nothing much curt its just a redo of an old video I did, after watching it 
again I noticed I edited it wrong

So I fixed it and added a couple of pics so it nothing new just corrected now

 

Bill

 

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 9 January 2023 11:27 AM
To: Legacy ornamental mills 
Subject: Bill's Square blossom rossette

 

https://www.youtube.com/watch?v=bUR3wT4JPms Good job Bill !

 

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1498229220.5094258.1673224033604%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d923d6%24c61c7eb0%2452557c10%24%40mmnet.com.au.